SS3-RC1512303DJI RC-N2

EB3WBC Quick Start Guide Aircraft 1. Horizontal Omnidirectional V ision System 2. Gimbal and Camera A Tele Camera B Wide Camera 3. Downward V ision System 4. Auxiliary Bottom Light 5. Infrared Sensing System 6. Battery Buckles 7. Landing Gears (Built-in antennas) 8. Front LEDs 9. Aircraft Status Indicators 10. Motors 11. Propellers 12. Intelligent Flight Battery 13. Power Button 14. Battery Level LEDs 15. USB-C Port 16. microSD Card Slot 17. Dongle Compartment Cover Remote Controller RC151 1. Power Button 2. Flight Mode Switch 3. Flight Pause/Return to Home (RTH) Button 4. Control Sticks 5. Customizable Button 6. Mobile Device Holder 7. Antennas 8. Remote Controller Cable 9. Photo/V ideo Toggle 10. Control Sticks Storage Slot 11. USB-C Port 12. Battery Level LEDs 13. Gimbal Dial 14. Shutter/Record Button 15. Mobile Device Slot Download the DJI Fly App and Watch the Tutorial Videos Charge to Activate Check Battery Level, Power On/Off Press once to check the battery level. Press, then press and hold to turn on/off. Prepare the Aircraft Prepare the Remote Controller Ready to Fly Power on the remote controller and the aircraft, then launch the DJI Fly App. Fly Auto take-off/landing: Remote controller operation Specifications Aircraft (Model: EB3WBC) Operating Temperature -10 to 40°C (14° to 104°F) Operating Frequency 2.400-2.4835 GHz; 5.15-5.25GHz;5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.1GHz<23 dBm (CE/FCC); 5.8 GHz: <33 dBm (FCC); <14 dBm (CE), <30 dBm (SRRC) Wi-Fi Protocol 802.11a/b/g/n/ac Operating Frequency 2.400-2.4835 GHz;5.15-5.25GHz;5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE) Remote Controller (Model: RC151) Operating Temperature -10 to 40°C (14° to 104°F) Operating Frequency 2.400-2.4835 GHz; 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <30 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <30 dBm (FCC), <23 dBm (SRRC), <14 dBm (CE) Intelligent Flight Battery (Model: BWX233-4241-14.76) Charging Temperature 5 to 40°C (41° to 104° F) Capacity 4241 mAh Max Charging Power 129 W Standard Voltage 14.76 V FCC Compliance Notice Supplier’s Declaration of Conformity Product name: DJI Air 3 Model Number: EB3WBC Responsible Party: DJI Research LLC Responsible Party Address: 435 Portage Ave, Palo Alto, CA 94306 Website: www.dji.com We, DJI Research LLC being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This remote controller complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 4 W/kg averaged over ten gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs. ISED Compliance Notice CAN ICES-003 (B) / NMB-003(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnemen…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SZ DJI TECHNOLOGY CO., LTD Address Lobby of T2, DJI Sky City, No 53 Xianyuan Road, Xili Community,Xili Street,Nanshan District,Shenzhen, China Grantee Code SS3 FCC ID SS3-RC1512303 Authorized Contact Name Gary.zeng Contact Email [email protected] Contact Phone 8675586152250 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [SZ DJI TECHNOLOGY CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [SZ DJI TECHNOLOGY CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023-06-05 Print Name: Gary Zeng Title: PM *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-06-06 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: SZ DJI TECHNOLOGY CO., LTD Company Name: DJI Research LLC Grantee Code: SS3 FRN: 0033569757 Contact Name: Gary Zeng Contact Name: Jie Shen Address: Lobby of T2, DJI Sky City, No 53 Xianyuan Road, Xili Community,Xili Street,Nanshan District, Address: 435 Portage Ave, Palo Alto, CA 94306 City/Province/Zip: Shenzhen City/Province/Zip: Palo Alto/California/94306 Telephone: 8675586152250 Telephone: 530-574-9905 Fax: +86 755 86965903 Fax: Email: [email protected] Email: [email protected] ATTN: Director of Certification: We, < SZ DJI TECHNOLOGY CO., LTD > and < DJI Research LLC > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < SZ DJI TECHNOLOGY CO., LTD > and < DJI Research LLC > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Gary Zeng Name (Printed): Jie Shen Title: PM Title: General Manager Signature: Signature:

SZ DJI TECHNOLOGY CO., LTD Date: 2023-06-05 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SS3-RC1512303 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Keny Xu in SGS- CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI TECHNOLOGY CO., LTD. This authorization is valid until further written notice from the applicant. Print Name: Gary Zeng Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SZ DJI TECHNOLOGY CO., LTD TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: SS3-RC1512303 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) BOM List Block Diagrams Operational Descriptions Tune up procedure Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Gary Zeng Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 External Photos for SZCR2304001004AT FCC ID: SS3-RC1512303 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5

Remark: The label information will be printed on the back of the remote control.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 5 Internal Photos for SZCR2304001004AT FCC ID: SS3-RC1512303 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 1 of 27 Appendix C for SZCR2304001004AT Calibration certificate 1. Dipole D2450V2 - SN 955(2022/06/06) D5GHzV2 - SN 1042(2022/06/01) 2. DAE DAE4 - SN 760(2022/06/06) 3. Probe EX3DV4 - SN 3836 (2022/06/27) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 2 of 27 1. Dipole D2450V2 - SN 817 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 3 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 4 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 5 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 6 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 7 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 8 of 27 D5GHzV2 - SN 1042 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 9 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 10 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 11 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 12 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 13 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 14 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 15 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 16 of 27 2. DAE4 - SN 760 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 17 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 18 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 19 of 27 3. EX3DV4 - SN 3836 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 20 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 21 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 22 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 23 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 24 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 25 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 26 of 27 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A01 Rev. A/0 May15,2023 Page: 27 of 27

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A/0 May15,2023 Report No.: SZCR230400100404 Page: 1 of 55 Keny Xu EMC Laboratory Manager FCC SAR TEST REPORT Application No.: SZCR2304001004AT Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Product Name: DJI RC-N2 Model No.: RC151 Trade mark: DJI FCC ID: SS3-RC1512303 Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2023-05-07 Date of Test: 2023-05-08 to 2023-05-10 Date of Issue: 2023-06-05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A/0 May15,2023 Report No.: SZCR230400100404 Page: 2 of 55 Revision Record Version Description Date Remark 00 Original 2023-06-05 / Authorized for issue by: Owen Xiao/ Project Engineer Eric Fu / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A/0 May15,2023 Report No.: SZCR230400100404 Page: 3 of 55 TEST SUMMARY Frequency Band Test position Test mode Max Reported SAR10g (W/kg) SAR limit (W/kg) SDR 2.4GHz Limbs 20M 1.06 4.0 SDR 5GHz Limbs 10M 1.19 4.0 Maximum Simultaneous SAR for Limbs 2.08 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A/0 May15,2023 Report No.: SZCR230400100404 Page: 4 of 55 CONTENTS 1 GENERAL INFORMATION......................................................................................................................... 6 1.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 6 1.2 DUT ANTENNA LOCATIONS .................................................................................................................... 7 1.3 TEST SPECIFICATION............................................................................................................................. 8 1.4 RF EXPOSURE LIMITS ............................................................................................................................ 9 1.5 TEST LOCATION ...................................................................................................................................10 1.6 TEST FACILITY .....................................................................................................................................10 2 LABORATORY ENVIRONMENT ...............................................................................................................11 3 SAR MEASUREMENTS SYSTEM CONFIGURATION ...............................................................................12 3.1 THE SAR MEASUREMENT SYSTEM ........................................................................................................12 3.2 ISOTROPIC E-FIELD PROBE EX3DV4 .....................................................................................................13 3.3 DATA ACQUISITION ELECTRONICS (DAE) ...............................................................................................14 3.4 SAM TWIN PHANTOM ...........................................................................................................................14 3.5 ELI PHANTOM .....................................................................................................................................15 3.6 DEVICE HOLDER FOR TRANSMITTERS.....................................................................................................16 3.7 MEASUREMENT PROCEDURE .................................................................................................................17 3.7.1 Scanning procedure ......................................................................................................................17 3.7.2 Data Storage .................................................................................................................................19 3.7.3 Data Evaluation by SEMCAD ........................................................................................................19 4 SAR MEASUREMENT VARIABILITY AND UNCERTAINTY .....................................................................21 4.1 SAR MEASUREMENT VARIABILITY...........................................................................................................21 4.2 SAR MEASUREMENT UNCERTAINTY ........................................................................................................22 5 DESCRIPTION OF TEST POSITION .........................................................................................................23 5.1 THE TEST POSITION .............................................................................................................................23 6 SAR SYSTEM VERIFICATION PROCEDURE ...........................................................................................24 6.1 TISSUE SIMULATE LIQUID ......................................................................................................................24 6.1.1 Recipes for Tissue Simulate Liquid ................................................................................................24 6.1.2 Test Liquids Confirmation ..............................................................................................................25 6.1.3 Measurement for Tissue Simulate Liquid .......................................................................................26 6.2 SAR SYSTEM CHECK ...........................................................................................................................27 6.2.1 Justification for Extended SAR Dipole Calibrations .............................…

Text truncated - open the document above for the full version.

1 DJI Antenna Datasheet ___RC151 antenna____ __ 2023-02-15 Revision history Version Change notes Modificator Date V1.0 First draft. Dave.li 2023.02.15 1 DJI Antenna Datasheet 1、 Basic Specifications No. Specification Descriptions Notes 1 Antenna Name RC151 Ant 2 Brand DJI 3 Operation Frequency 2.4~2.483GHz; 5.15~5.25GHz 5.725~5.875GHz 4 Connector Type Ipex-1 5 Impedance 50ohm 6 Gain Ant0&Ant1 [email protected]~2.483GHz [email protected]~5.25GHz [email protected]~5.875GHz 7 Efficiency ≥45% 8 VSWR ≤2 9 Polarization type Linear 10 3dB Beamwidth Omnidirectional horizon 11 Weight 12 Antenna type Integral Antenna 13 Manufacturer Shenzhen ZTX Communication Technology Co., LTD. Kunshan Innowave Communication Technology Co., Ltd. 14 Manufacturer Address: No.34 Shilong Road, Bao'an District, Shenzhen, Guangdong Province Workshop No.5, No. 1689, Zizhu Road, Yushan Town, Kunshan City 2、 Antenna efficiency/Return Loss/VSWR Frequency gain(dBi)R efficiency(%)R gain （dBi）L efficiency （%）L 2400MHz 2.05 65% 2.05 65% 2420MHz 3.00 67% 3.00 67% 2440MHz 2.46 68% 2.46 68% 2450MHz 2.25 68% 2.25 68% 2460MHz 2.12 68% 2.12 68% 2480MHz 2.00 66% 2.00 66% 5150MHz 1.22 49% 1.22 49% 5200MHz 1.50 54% 1.50 54% 5700MHz 3.52 59% 3.52 59% 5750MHz 3.47 59% 3.47 59% 5800MHz 3.78 61% 3.78 61% 5850MHz 4.00 63% 4.00 63% 3、 Radiation Pattern Test lab：Satimo SG24 Test date：2023/02/10 3.1 2.4G radiation pattern Phi=0 Phi=90 3.2 5.2G radiation pattern Phi=0 Phi=90 3.3 5.8G radiation pattern Phi=0 Phi=90 4、 Structure drawing antenna 2D

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230400100402 Page: 1 of 358 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2304001004AT Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Equipment Under Test (EUT): EUT Name: DJI RC-N2 Model No.: RC151 Trade Mark: DJI FCC ID: SS3-RC1512303 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-04-10 Date of Test: 2023-04-23 to 2023-05-28 Date of Issue: 2023-06-05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230400100402 Page: 2 of 358 Revision Record Version Chapter Date Modifier Remark 01 2023-06-05 Original Authorized for issue by: Darren Yuan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230400100402 Page: 3 of 358 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230400100402 Page: 4 of 358 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Des…

Text truncated - open the document above for the full version.