SS3-RC3312303DJI RC 2

EB3WBC Quick Start Guide Aircraft 1. Horizontal Omnidirectional V ision System 2. Gimbal and Camera A Tele Camera B Wide Camera 3. Downward V ision System 4. Auxiliary Bottom Light 5. Infrared Sensing System 6. Battery Buckles 7. Landing Gears (Built-in antennas) 8. Front LEDs 9. Aircraft Status Indicators 10. Motors 11. Propellers 12. Intelligent Flight Battery 13. Power Button 14. Battery Level LEDs 15. USB-C Port 16. microSD Card Slot 17. Dongle Compartment Cover Remote Controller RC331 1. Antennas 2. Control Sticks 3. Status LED 4. Battery Level LEDs 5. Power Button 6. Flight Mode Switch 7. Flight Pause/Return to Home (RTH) Button 8. Touchscreen 9. Customizable Buttons 10. Control Sticks Storage Slot 11. Air Intake 12. Air Vent 13. USB-C port 14. microSD Card Slot 15. Focus/Shutter Button 16. Camera Control Dial 17. Record Button 18. Gimbal Dial Charge to Activate Check Battery Level, Power On/Off Press once to check the battery level. Press, then press and hold to power on/off. Prepare the Aircraft Prepare the Remote Controller > Ready to Fly Power on the remote controller and the aircraft, then launch the DJI Fly App. DJI Fly App Fly Auto take-off/landing: Remote controller operation Specifications Aircraft (Model: EB3WBC) Operating Temperature -10 to 40°C (14° to 104°F) Operating Frequency 2.4000-2.4835 GHz; 5.725-5.850 GHz; 5.150-5.25GHz Transmitter Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.1GHz: <23 dBm (FCC/CE) 5.8 GHz: <26 dBm (FCC/SRRC), <14 dBm (CE) Wi-Fi Protocol 802.11a/b/g/n Operating Frequency 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.2 GHz: <23 dBm (FCC/CE/SRRC/MIC) 5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE) Remote Controller (Model: RC331) Operating Temperature -10 to 40°C (14° to 104°F) Operating Frequency 2.400-2.4835 GHz; 5.725-5.850 GHz; 5.150-5.25GHz Transmitter Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.1GHz: <23 dBm (FCC/CE) 5.8 GHz: <26 dBm (FCC), <23 dBm (SRRC), <14 dBm (CE) Wi-Fi Protocol 802.11a/b/g/n/ax Operating Frequency 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.2 GHz: <23 dBm (FCC/CE/SRRC/MIC) 5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE) Intelligent Flight Battery (Model: BWX233-4241-14.76) Charging Temperature 5 to 40°C (41 to 104°F) Capacity 4241 mAh Max Charging Power 129 W Standard Voltage 14.76 V FCC Compliance Notice Supplier’s Declaration of Conformity Product name: DJI Air 3 Model Number: EB3WBC Responsible Party: DJI Research LLC Responsible Party Address: 435 Portage Ave, Palo Alto, CA 94306 Website: www.dji.com We, DJI Research LLC, being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This remote controller complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 4 W/kg averaged over ten gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs. ISED Compliance Notice CAN ICES-003 (B) / NMB-003(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subjec…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SZ DJI TECHNOLOGY CO., LTD Address Lobby of T2, DJI Sky City, No 53 Xianyuan Road, Xili Community,Xili Street,Nanshan District,Shenzhen, China Grantee Code SS3 FCC ID SS3-RC3312303 Authorized Contact Name Gary Zeng Contact Email [email protected] Contact Phone 8675586152250 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [SZ DJI TECHNOLOGY CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [SZ DJI TECHNOLOGY CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023-06-05 Print Name: Gary Zeng Title: PM *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-06-06 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: SZ DJI TECHNOLOGY CO., LTD Company Name: DJI Research LLC Grantee Code: SS3 FRN: 0033569757 Contact Name: Gary Zeng Contact Name: Jinyu Guo Address: Lobby of T2, DJI Sky City, No 53 Xianyuan Road, Xili Community,Xili Street,Nanshan District, Address: 435 Portage Ave, Palo Alto, CA 94306 City/Province/Zip: Shenzhen City/Province/Zip: Palo Alto/California/94306 Telephone: 8675586152250 Telephone: 530-574-9905 Fax: +86 755 86965903 Fax: Email: [email protected] Email: [email protected] ATTN: Director of Certification: We, < SZ DJI TECHNOLOGY CO., LTD > and < DJI Research LLC > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < SZ DJI TECHNOLOGY CO., LTD > and < DJI Research LLC > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Gary Zeng Name (Printed): Jinyu Guo Title: PM Title: Corporate counsel Signature: Signature:

SZ DJI TECHNOLOGY CO., LTD Date: 2023-06-05 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SS3-RC3312303 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Keny Xu in SGS- CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI TECHNOLOGY CO., LTD. This authorization is valid until further written notice from the applicant. Print Name: Gary Zeng Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SZ DJI TECHNOLOGY CO., LTD TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: SS3-RC3312303 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) BOM List Block Diagrams Operational Descriptions Tune up procedure Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Gary Zeng Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 External Photos for SZCR2304001009AT FCC ID: SS3-RC3312303 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5

View E-label Swipe down from the top of the home screen to enter Quick Settings, tap and select Compliance Info.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 9 Internal Photos for SZCR2304001009AT FCC ID: SS3-RC3312303 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 9 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 8 of 9 Antenna Location SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 9 of 9 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR230400065601 Page: 1 of 85 Eric Lin EMC Laboratory Manager SAR TEST REPORT Application No.: KSCR2304000656AT(SZCR2304001009AT) Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China Product Name: DJI RC 2 Model No.(EUT): RC331 FCC ID: SS3-RC3312303 Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2023-04-17 Date of Test: 2023-06-07 to 2023-06-10 Date of Issue: 2023-06-20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR230400065601 Page: 2 of 85 REVISION HISTORY Revision Record Version Description Date Remark 00 Original 2023-06-20 / Authorized for issue by: Richard.Kong/ Project Engineer Eric.Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR230400065601 Page: 3 of 85 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Body 1-g Extremity 10-g WI-FI (2.4GHz) 0.81 0.37 WI-FI (5GHz) 0.64 1.84 Bluetooth ＜0.01 0.02 SDR 2.4GHz 0.02 1.60 SDR 5GHz 0.06 2.51 Sum SAR 1.14 3.45 SAR Limited(W/kg) 1.6 4.0 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR230400065601 Page: 4 of 85 CONTENTS 1 General Information .................................................................................................................................. 6 1.1 General Description of EUT ................................................................................................................ 6 1.1.1 DUT Antenna Locations .................................................................................................................. 7 1.2 Test Specification ............................................................................................................................... 8 1.3 RF exposure limits .............................................................................................................................. 9 1.4 Test Location .....................................................................................................................................10 1.5 Test Facility .......................................................................................................................................10 2 Laboratory Environment ..........................................................................................................................11 3 SAR Measurements System Configuration ............................................................................................12 3.1 The SAR Measurement System .........................................................................................................12 3.2 Isotropic E-field Probe EX3DV4 .........................................................................................................13 3.3 Data Acquisition Electronics (DAE) ....................................................................................................15 3.4 SAM Twin Phantom ...........................................................................................................................15 3.5 ELI Phantom......................................................................................................................................16 3.6 Device Holder for Transmitters...........................................................................................................17 3.7 Measurement procedure ....................................................................................................................18 3.7.1 Scanning procedure ......................................................................................................................18 3.7.2 Data Storage .................................................................................................................................20 3.7.3 Data Evaluation by SEMCAD ........................................................................................................20 4 SAR measurement variability and uncertainty .......................................................................................22 4.1 SAR measurement variability .............................................................................................................22 4.2 SAR measurement uncertainty ..........................................................................................................23 5 Description of Test Position ....................................................................................................................24 5.1 Extremity exposure conditions ...........................................................................................................24 6 SAR System Verification Procedure .......................................................................................................25 6.1 Tissue Simulate Liquid .......................................................................................................................25 6.1.1 Recipes for Tissue Simulate Liquid ................................................................................................25 6.1.2 Test Liquids Confirmation ..............................................................................................................26 6.1.3 Measurement for Tissue Simulate Liquid .......................................................................................27 6.2 SAR System Check ...........................................................................................................................28 6.2.1 Justification for Extended SAR Dipole Calibrations ........................................................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 26 Appendix C for KSCR230400065601 Calibration Certificate Object Apply No Model SN Calibration Date Due date of calibration Dipole 1 CLA150 4025 2021/04/26 2024/04/25 2 D450V3 1103 2021/04/21 2024/04/20 3 D750V3 1188 2022/03/29 2025/03/28 4 D835V2 4d114 2022/03/31 2025/03/30 5 D900V2 1d079 2022/06/07 2025/06/06 6 D1800V2 2d170 2022/03/31 2025/03/30 7 D1900V2 5d136 2022/06/07 2025/06/06 8 D2000V2 1041 2022/06/06 2025/06/05 9 D2300V2 1096 2022/03/31 2025/03/30 10 D2450V2 817 2022/04/01 2025/03/31 11 D2600V2 1158 2022/03/31 2025/03/30 12 D5GHzV2 1095 2022/06/01 2025/05/31 DAE 13 DAE4 1245 2023/04/25 2024/04/24 Probe 14 EX3DV4 7767 2022/10/28 2023/10/27 Compliance Certification Services (Kunshan) Inc. Page: 2 of 26 1 Dip o le 1.1 CLA150 - SN 4025 Compliance Certification Services (Kunshan) Inc. Page: 3 of 26 1.2 D450V3 - SN 1103 Compliance Certification Services (Kunshan) Inc. Page: 4 of 26 Compliance Certification Services (Kunshan) Inc. Page: 5 of 26 1.3 D750V3 - SN 1188 Compliance Certification Services (Kunshan) Inc. Page: 6 of 26 1.4 D835V2 - SN 4d114 Compliance Certification Services (Kunshan) Inc. Page: 7 of 26 Compliance Certification Services (Kunshan) Inc. Page: 8 of 26 1.5 D900V2 - SN 1d079 Compliance Certification Services (Kunshan) Inc. Page: 9 of 26 1.6 D1800V2 - SN 2d170 Compliance Certification Services (Kunshan) Inc. Page: 10 of 26 Compliance Certification Services (Kunshan) Inc. Page: 11 of 26 1.7 D1900V2 - SN 5d136 Compliance Certification Services (Kunshan) Inc. Page: 12 of 26 1.8 D2000V2 - SN 1041 Compliance Certification Services (Kunshan) Inc. Page: 13 of 26 Compliance Certification Services (Kunshan) Inc. Page: 14 of 26 1.9 D2300V2 - SN 1096 Compliance Certification Services (Kunshan) Inc. Page: 15 of 26 1.10 D2450V2 - SN 817 Compliance Certification Services (Kunshan) Inc. Page: 16 of 26 Compliance Certification Services (Kunshan) Inc. Page: 17 of 26 1.11 D2600V2 - SN 1158 Compliance Certification Services (Kunshan) Inc. Page: 18 of 26 1.12 D5GHzV2 - SN 1095 Compliance Certification Services (Kunshan) Inc. Page: 19 of 26 Compliance Certification Services (Kunshan) Inc. Page: 20 of 26 Compliance Certification Services (Kunshan) Inc. Page: 21 of 26 2 DAE4 - SN 910 Compliance Certification Services (Kunshan) Inc. Page: 22 of 26 3 EX3D V4 - SN 7767 Compliance Certification Services (Kunshan) Inc. Page: 23 of 26 Compliance Certification Services (Kunshan) Inc. Page: 24 of 26 Compliance Certification Services (Kunshan) Inc. Page: 25 of 26 4 Imp ed an ce an d ret u rn lo ss Dipole CLA150 SN 4025 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2021/4/26 -31.4 / 47.8 / 2022/4/26 -32.5 -3.5% 47.1 0.7 2023/4/26 -32.3 -2.87% 46.5 1.3 Dipole D450V3 SN 1103 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2021/4/21 -23 / 57.1 / 2022/4/26 -23.4 -1.74% 56.6 0.5 2023/4/26 -23.9 -3.91% 56.2 0.9 Dipole D750V3 SN 1188 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/3/29 -28.7 / 53.6 / 2023/3/29 -28.3 1.39% 53.2 0.4 Dipole D835V2 SN 4d114 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/3/31 -25.3 / 48.7 / 2023/3/31 -24.6 2.77% 49.1 0.4 Dipole D900V2 SN 1d079 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/7 -23.3 / 48.1 / 2023/6/7 -23.6 -1.29% 48.3 0.2 Dipole D1800V2 SN 2d170 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/3/31 -29.4 / 47.9 / 2023/3/31 -28.9 1.70% 47.2 0.7 Dipole D1900V2 SN 5d136 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/7 -22.4 / 51.2 / Dipole D2000V2 SN 1041 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/6 -34.9 / 48.4 / Dipole D2300V2 SN 1096 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Compliance Certification Services (Kunshan) Inc. Page: 26 of 26 2022/3/31 -26.6 / 49.2 / 2023/3/31 -27.1 -1.88% 49.4 0.2 Dipole D2450V2 SN 817 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/4/1 -28.5 / 52.1 / 2023/4/1 -28.0 1.75% 51.6 0.5 Dipole D2600V2 SN 1158 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/3/31 -23.8 / 49.9 / 2023/3/31 -23.3 2.10% 50.3 0.4 Dipole D5GHzV2 SN 1095 for 5200 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/1 -23.6 / 46.1 / Dipole D5GHzV2 SN 1095 for 5300 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/1 -29.5 / 47.8 / Dipole D5GHzV2 SN 1095 for 5500 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/1 -27.4 / 50.3 / Dipole D5GHzV2 SN 1095 for 5600 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/1 -24.0 / 54.5 / Dipole D5GHzV2 SN 1095 for 5800 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2022/6/1 -24.9 / 51.5 /

1 DJI Antenna Datasheet ___RC331 antenna____ __ 2023-02-23 Revision history Version Change notes Modificator Date V1.0 First draft. Stephen.Wan 2023.02.22 1 DJI Antenna Datasheet 1、 Basic Specifications No. Specification Descriptions Notes 1 Antenna Name RC331 WiFi Ant 2 Brand DJI 3 Operation Frequency 2.4~2.483GHz; 5.15~5.25GHz; 5.725~5.85GHz 4 Connector Type Ipex-1 5 Impedance 50ohm 6 Gain Ant0: [email protected]~2.483GHz WIFI [email protected]~5.25GHz WIFI [email protected]~5.875GHz WIFI Ant1: [email protected]~2.483GHz WIFI [email protected]~5.25GHz WIFI [email protected]~5.875GHz WIFI 7 Efficiency ≥20% WIFI 8 VSWR ≤2 9 Polarization type Linear 10 3dB Beamwidth Omnidirectional horizon 11 Weight 12 Antenna type PCB 2、 Antenna Return Loss/VSWR 2.1 W IFI antenna return loss Ant0 Mark(GHz) 2.4 2.48 5.725 5.85 S11 -8.8 -7 -5 -5.2 Ant1 Mark(GHz) 2.4 2.48 5.725 5.85 S11 -10.9 -8.2 -7.8 -13.5 3、 Antenna Gain 3.1 wifi Ant0 Frequency Efficiency Gain.dB 2400MHz 48% 2.50 2420MHz 47% 2.50 2440MHz 45% 2.19 2460MHz 46% 2.29 2480MHz 46% 2.15 5160MHz 51% 4.00 5190MHz 52% 4.00 5205MHz 53% 3.93 5235MHz 50% 3.52 5250MHz 52% 3.58 5730MHz 63% 4.61 5760MHz 61% 4.64 5790MHz 69% 5.00 5800MHz 65% 4.29 5850MHz 67% 4.82 Ant1 Frequency Efficiency Gain.dB 2400MHz 53% 3.50 2440MHz 52% 3.50 2480MHz 48% 3.00 5205MHz 41% 0.89 5220MHz 42% 1.00 5730MHz 51% 3.48 5800MHz 52% 3.50 5850MHz 49% 3.18 4、 Structure drawing 5.1 WIFI antenna Ant0 Ant1 Name of the antenna manufacturer：Shenzhen ZTX Communication Technology Co., LTD. Address of the antenna manufacturer：No.34 Shilong Road, Bao’an Dsitrict, Shenzhen, Guangdong Province Website of the antenna manufacturer：www.ztxun.com

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230400100902 Page: 1 of 99 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2304001009AT Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Equipment Under Test (EUT): EUT Name: DJI RC 2 Model No.: RC331 Trade Mark: DJI FCC ID: SS3-RC3312303 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-04-10 Date of Test: 2023-04-23 to 2023-05-28 Date of Issue: 2023-06-05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230400100902 Page: 2 of 99 Revision Record Version Chapter Date Modifier Remark 01 2023-06-05 Original Authorized for issue by: Darren Yuan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230400100902 Page: 3 of 99 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47…

Text truncated - open the document above for the full version.