SS3-RM500E1910DJI Smart Controller Enterprise

User Guide 使用说明 2019.12 v1.0 DJI Smart Controller Enterprise 2 Disclaimer Please read this entire document and all safe and lawful practice DJI TM provided carefully, and visit the DJI official website (http://www.dji.com) to download the full version of the User Manual and carefully read all instructions and warnings therein before use. Failure to read and follow instructions and warnings or lack of strong awareness of safety during the operation may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI. This document and all other collateral documents are subject to change at the sole discretion of DJI. For up to date product information, visit http://www.dji.com and click on the product page for this product. This disclaimer is available in various languages. In the event of divergence among different versions, the English version shall prevail. Warning Always stay alert when using the DJI Smart Controller Enterprise (hereinafter referred as “Smart Controller”) to control an Unmanned Aerial Vehicle (UAV). Carelessness may result in serious harm to yourself and others. Always download and read the Disclaimer and Safety Guidelines of the aircraft and the detailed User Manual before usage. 1. Fully charge the Smart Controller before each flight. 2. If the Smart Controller is turned on and the touch screen is off for five minutes, an alert sound will be triggered. Ten seconds after the alert sound, the Smart Controller will automatically power off. Move the sticks or perform some other action to cancel the alert. 3. Ensure the antennas are unfolded and adjusted to the proper position to achieve the optimal transmission quality. 4. Contact DJI support to repair or replace the antennas if they are damaged. Damaged antennas will greatly decrease performance. 5. Link the Smart Controller and the aircraft again if you change the aircraft. 6. Ensure to power off the aircraft before the Smart Controller. 7. Fully charge the Smart Controller every three months. 8. Immediately charge the Smart Controller when its power level decreases to 10% to prevent the Smart Controller from damage due to over discharge for an extended period. Discharge the Smart Controller to a power level between 40% and 60% if stored for an extended period. 9. DO NOT cover the air vent on the Smart Controller. Otherwise, the Smart Controller may become too hot, which could affect its performance. 10. DO NOT disassemble the Smart Controller without the assistance of a DJI authorized dealer. Always contact Smart Controller's DJI or a DJI authorized dealer to replace the Smart Controller’s components. 11. DO NOT block the Smart Controller's built-in GPS. In cases where the DJI Smart Controller Enterprise Screen Mounting Bracket (hereinafter referred as “Mounting Bracket”) is installed, remove it and try again if GPS signal is poor. 12. To avoid wear and tear of the Stick Covers, DO NOT disassemble the sticks on a frequent basis. 1 Introduction The DJI Smart Controller Enterprise (hereinafter referred to as “Smart Controller”) features OCUSYNC TM Enterprise technology, capable of controlling aircraft that supports this technology, and providing a live HD view from the aircraft's camera. It can transmit image data at distances of up to 6.21 mi (10 km) and comes with a number of aircraft and gimbal controls as well as some customizable buttons. * The built-in 5.5-inch high brightness 1000 cd/m² screen has a resolution of 1920×1080 pixels, featuring an Android system with multiple functions such as Bluetooth and GNSS. In addition to supporting Wi-Fi connectivity, it is also compatible with other mobile devices for more flexible usage. The Smart Controller has a maximum working time of 2.5 hours with the built-in battery. When using the WB37 Intelligent Battery, the maximum working time can be extended to 4.5 hours. ** * The Smart Controller can reach its maximum transmission distance (FCC) in an unobstructed area with no electro- magnetic interference at an altitude of about 400 feet (120 meters). The actual maximum transmission distance may be less than the distance mentioned above due to interference in the operating environment, and the actual value will fluctuate according to the strength of interference. To comply with local regulations, the 5.8 GHz frequency is not available in some countries and regions. ** Maximum run time is estimated in a lab environment, for reference only. When the Smart Controller is powering other devices, the run time will be diminished. *** The charger type varies depending on the region. In the Box Smart Controller USB-C Cable Spare Control Stick (pair) ×1 ×1 ×1 WB37 Intelligent Battery×1 USB Cable (with Double A Ports) ×1 Spare Stick Cover (pair) ×1 USB Charger *** Smart Controller Lanyard ×1 Manuals DJI Smart Controller Enterprise User Guide WB37 Intelligent Battery Safety Guidelines 2 Overview 1. Antennas 2. Back Button / Function Button 3. Control Sticks 4. Stick Covers 5. RTH Button 6. Flight Pause Button 7. Flight Mode Switch 8. Position for Mounting Bracket (with buil…

Text truncated - open the document above for the full version.

DISCLAIMER AND SAFETY GUIDELINES 免责声明和安全操作指引 免責聲明與安全指導方針 免責事項および安全に関するガイドライン HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD CLAUSE D‘EXCLUSION DE RESPONSABILITÉ ET CONSIGNES DE SÉCURITÉ LIMITAZIONI DI RESPONSABILITÀ E DIRETTIVE SULLA SICUREZZA DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN ISENÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA DECLARAÇÃO DE EXONERAÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA ОТКАЗ ОТ ОТВЕТСТВЕННОСТИ И РУКОВОДСТВО ПО ТЕХНИКЕ БЕЗОПАСНОСТИ 2020.02v1.0 MATRICE 300 RTK 1 NOTICE 4 Glossary 4 Pre-flight Checklist 4 Disclaimer and Warning 4 Before You Begin 5 Individual Parts 5 Product Care 7 Flight Condition Requirements 7 Flight Modes, Functions and Warnings 7 Compliance with Regulations & GEO Zones 9 EN Contents CHS 目录 CHT 目录 DE Inhalt KR 목차 JP 目次 ES Contenido 安全概要 10 词汇表 11 飞行前检查列表 12 免责声明与警告 12 使用前须知 12 部件使用须知 12 产品保养 14 飞行条件要求 14 飞行模式和警示 15 法律规范与飞行限制 16 安全總覽 17 詞彙表 18 飛行前檢查表 19 免責聲明與警告 19 使用前須知 19 零組件使用須知 19 產品保養 21 飛行條件要求 21 飛行模式和警告 22 法律規範與飛行限制 23 安全についての概要 24 注 記 26 用語集 26 フライト前チェックリスト 26 免責事項および警告 26 使用を開始する前に 27 各部部品 27 本製品の手入れ 29 フライトの必須条件 29 フライトモード、機能および注意事項 29 規制および GEO 区域の遵守 31 안전 지침 요약 32 알림 34 용어집 34 비행 전 체크리스트 34 고지 사항 및 경고 34 시작하기 전에 35 개별 부품 35 제품 관리 37 비행 조건 요구사항 37 비행 모드 , 작동 및 경고 37 규정 및 GEO 구역 준수 39 Sicherheitsvorschriften auf einen Blick 40 HINWEIS 42 Glossar 42 Checkliste für die Flugvorbereitung 42 Haftungsausschluss und Warnhinweis 42 Bevor Sie anfangen 43 Einzelteile 43 Pflege des Produkts 45 Anforderungen an die Flugbedingungen 45 Flugmodi, Funktionen und Warnhinweise 45 Beachtung von Vorschriften und GEO-Zonen 47 Seguridad de un vistazo 48 AVISO 50 Glosario 50 Lista de comprobación previa al vuelo 50 Renuncia de responsabilidad y advertencia 50 Antes de comenzar 51 FR Sommaire IT Sommario NL Inhoud PT-BR Conteúdo RU Содержание Compliance Information 105 Sécurité – Aperçu 56 REMARQUE 58 Glossaire 58 Liste des vérifications avant le vol 58 Clause d’exclusion de responsabilité et mise en garde 58 Avant de commencer 59 Pièces individuelles 59 Entretien du produit 61 Exigences relatives aux conditions de vol 61 Modes de vol, fonctions et avertissements 61 Conformité aux réglementations et aux zones GEO 63 Sicurezza in sintesi 64 AVVISO 66 Glossario 66 Elenco dei controlli preliminari 66 Limitazioni di responsabilità e avvertenze 66 Prima di cominciare 67 Componenti 67 Cura del prodotto 69 Requisiti delle condizioni di volo 69 Modalità di volo, funzioni e avvertenze 69 Conformità alle normative e zone GEO 71 PT Conteúdo Veiligheid in één oogopslag 72 OPMERKING 74 Verklarende woordenlijst 74 Checklist ter voorbereiding van de vlucht 74 Disclaimer en waarschuwing 74 Voordat u begint 75 Afzonderlijke onderdelen 75 Productonderhoud 77 Vereisten voor vluchtomstandigheden 77 Vliegstanden, functies en waarschuwingen 77 Naleving van regelgeving en voorschriften ten aanzien van 79 Resumo de segurança 80 ATENÇÃO 82 Glossário 82 Lista de verificação antes do voo 82 Declaração de exoneração de responsabilidade e aviso 82 Antes de começar 83 Peças individuais 83 Cuidados com o produto 85 Requisitos da condição de voo 85 Modos de voo, funções e avisos 85 Conformidade com regulamentos e Zonas GEO 87 Noções de segurança 88 AVISO 90 Glossário 90 Lista de verificação pré-voo 90 Isenção de Responsabilidade e Advertência 90 Antes de começar 91 Peças individuais 91 Cuidados com o produto 93 Requisitos de condições de voo 93 Conformidade com regulamentos e zonas GEO 95 Краткий обзор правил техники безопасности 96 ПРИМЕЧАНИЕ 98 Обозначения 98 Предполетная проверка 98 Отказ от ответственности и предупреждение 98 Перед началом эксплуатации 99 Отдельные компоненты 99 Уход за устройством 101 Требования к условиям полета 102 Режимы полета, функции и предупреждения 102 Соответствие нормативно-правовым актам и зонам GEO 104 Piezas individuales 51 Cuidado del producto 53 Requisitos de condiciones de vuelo 53 Modos de vuelo, funciones y advertencias 53 Cumplimiento de normativas y zonas GEO 55 EN 2 Safety at a Glance 1. Environmental Considerations • Always fly at locations that are clear of building and other obstacles. • DO NOT fly above or near large crowds. • Avoid flying at altitudes above 400 feet (120 m)*. • Fly in moderate weather conditions with temperatures between -20° to 50°C (-4° to 122°F). • Please take additional caution when flying indoors as the aircraft stabilization features may experience some interference. • DO NOT fly when the wind speed exceeds 12 m/s or 27 mph. Land the aircraft as soon as possible when the DJI Pilot app prompts you to do so. 2. Pre-flight Checklist • Ensure the remote controller and aircraft batteries are fully charged. • Ensure the propellers are in good condition and securely tightened before each flight. • Ensure there is nothing obstructing the motors. Check that the motors are clean and free of stains. • Check that the camera lens is clean and free of stains. • Complete the pre-flight checklist displayed in DJI Pilot app. Calibrate the compass and the IMU when the DJI Pilot app or the status indicator prompt you to do so. • Ensure the GPS satellite number is not less than 6 in the DJI Pilot app. • Altering or modifying the aircraft’s parts may impact its stability. Strictly follow DJI’s official instruction to attach compatible external equipment and please ensure that the overall weight of the aircraft does not exceed 9 kg after attachment. Be sure that the external equipment is mounted in the right position as provided in the official instruction to avoid the displacement of the aircraft’s center of gravity. • Ensure the vision system, infrared sensors, FPV cameras and auxiliary lights lens are clean and free of stains or fingerprints, and they are not obstructed by any parts (e.g. load attached). • Ensure the frame arms are fully unfolded, the frame arms and the landing gears are locked firmly. • Ensure the rubber plug are inserted firmly when the ports on aircraft and r…

Text truncated - open the document above for the full version.

QA-FR-170-B SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:[email protected] FCC Authorization Date: 2020-02-05 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , SZ DJI TECHNOLOGY CO., LTD, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name: wang fajia Title:Project Manager

QA-FR-172-A SZ DJI TECHNOLOGY CO., LTD Add: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Tel: 0755-86152250 Fax: 0755-86965903 E-mail:[email protected] FCC Confidential Authorization Date: 2020-02-05 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: SS3-RM500E1910 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, SZ DJI TECHNOLOGY CO., LTD, hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description As well as short-term (secrecy cycle: 1 80days) confidential treatment of information application as outlined below: Internal Photos User’s Manual External Photos Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Name: wang fajia Title: Project Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS WIFI Module SDR Module GPS Module WIFI/BT Antenna WiFi Antenna (Chain 1) WiFi/BT Antenna (Chain 0) SDR Antenna SDR Tx Antenna (Chain 0) SDR Rx Antenna (Chain 1)

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” SAR EVALUATION REPORT For SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China FCC ID: SS3-RM500E1910 IC: 11805A-RM500E1910 Report Type: Original Report Product Type: DJI Smart Controller Enterprise Report Number: RDG191226022-20 Report Date: 2020-03-28 Reviewed By: Rocky Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191226022-20 SAR Evaluation Report 2 of 59 Attestation of Test Results EUT Information EUT Description DJI Smart Controller Enterprise Tested Model RM500-ENT FCC ID SS3-RM500E1910 IC 11805A-RM500E1910 Serial Number RDG191226022-SA-S1 Test Date 2020-02-05 ~ 2020-02-08 MODE Max. SAR Level(s) Reported(W/kg) Limit SDR 2.4G 10g Extremity SAR 2.15 4.0 W/kg SDR 5.8G 10g Extremity SAR 1.41 WLAN 2.4G 10g Extremity SAR 0.19 WLAN 5.2G 10g Extremity SAR 0.28 WLAN 5.8G 10g Extremity SAR 0.78 Bluetooth 10g Extremity SAR 0.01 Simultaneous 10g Extremity SAR 2.26 SDR 2.4G 1g Body SAR 1.20 1. 6 W/kg SDR 5.8G 1g Body SAR 1.23 WLAN 2.4G 1g Body SAR 0.12 WLAN 5.2G 1g Body SAR 0.36 WLAN 5.8G 1g Body SAR 1.18 Bluetooth 1g Body SAR 0.01 Simultaneous 1g Body SAR 1.45 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RSS-102 Issue 5 March 2015 Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands). RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human H ead from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06. KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 KDB 941225 D07 UMPC Mini Tablet v01r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093/RSS-102 Issue 5 March 2015 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191226022-20 SAR Evaluation Report 3 of 59 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION .................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 6 SAR LIMITS ................................................................................................................................................................. 7 FACILITIES .................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 15 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 16 LIQUID VERIFICATION ............................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 18 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 19 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 24 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 24 CHEEK/TOUCH POSITION ........................................................................................................................................... 25 EAR/TILT PO…

Text truncated - open the document above for the full version.

Report No.: RDG191226022-20 Page 1 of 98 Test Plot1#:SDR 2.4G 3M_Handheld Back _Low DUT: DJI Smart Controller Enterprise; Type: RM500-ENT; Serial: RDG191226022-SA-S1 Communication System: SDR 2.4G; Frequency: 2405.5 MHz;Duty Cycle: 1:7.81 Medium parameters used: f = 2405.5 MHz; σ = 1.74 S/m; ε r = 40.471; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.6, 7.6, 7.6) @ 2405.5 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (101x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 9.74 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.508 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 11.8 W/kg SAR(1 g) = 4.83 W/kg; SAR(10 g) = 1.93 W/kg Maximum value of SAR (measured) = 8.12 W/kg 0 dB = 8.12 W/kg = 9.10 dBW/kg Report No.: RDG191226022-20 Page 2 of 98 Test Plot2#:SDR 2.4G 3M_Handheld Back _Mid DUT: DJI Smart Controller Enterprise; Type: RM500-ENT; Serial: RDG191226022-SA-S1 Communication System: SDR 2.4G; Frequency: 2441.5 MHz;Duty Cycle: 1:7.81 Medium parameters used: f = 2441.5 MHz; σ = 1.796 S/m; ε r = 39.948; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.6, 7.6, 7.6) @ 2441.5 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (111x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 8.45 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.464 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 10.3 W/kg SAR(1 g) = 4.77 W/kg; SAR(10 g) = 2.06 W/kg Maximum value of SAR (measured) = 7.89 W/kg 0 dB = 7.89 W/kg = 8.97 dBW/kg Report No.: RDG191226022-20 Page 3 of 98 Test Plot3#: SDR 2.4G 3M_Handheld Back _High DUT: DJI Smart Controller Enterprise; Type: RM500-ENT; Serial: RDG191226022-SA-S1 Communication System: SDR 2.4G; Frequency: 2474.5 MHz;Duty Cycle: 1:7.81 Medium parameters used: f = 2474.5 MHz; σ = 1.846 S/m; ε r = 39.783; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.6, 7.6, 7.6) @ 2474.5 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (101x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 11.4 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.969 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 12.5 W/kg SAR(1 g) = 5.05 W/kg; SAR(10 g) = 2.02 W/kg Maximum value of SAR (measured) = 8.99 W/kg 0 dB = 8.99 W/kg = 9.54 dBW/kg Report No.: RDG191226022-20 Page 4 of 98 Test Plot4#: SDR 2.4G 1.4M_Handheld Back _Mid DUT: DJI Smart Controller Enterprise; Type: RM500-ENT; Serial: RDG191226022-SA-S1 Communication System: SDR 2.4G; Frequency: 2441.5 MHz;Duty Cycle: 1:7.78 Medium parameters used: f = 2441.5 MHz; σ = 1.796 S/m; ε r = 39.948; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.6, 7.6, 7.6) @ 2441.5 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (111x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 7.61 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.131 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 8.75 W/kg SAR(1 g) = 4.13 W/kg; SAR(10 g) = 1.76 W/kg Maximum value of SAR (measured) = 6.78 W/kg 0 dB = 6.78 W/kg = 8.31 dBW/kg Report No.: RDG191226022-20 Page 5 of 98 Test Plot5#: SDR 2.4G 10M_Handheld Back _Mid DUT: DJI Smart Controller Enterprise; Type: RM500-ENT; Serial: RDG191226022-SA-S1 Communication System: SDR 2.4G; Frequency: 2441.5 MHz;Duty Cycle: 1:1.9 Medium parameters used: f = 2441.5 MHz; σ = 1.796 S/m; ε r = 39.948; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.6, 7.6, 7.6) @ 2441.5 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (111x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 10.2 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.424 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 14.1 W/kg SAR(1 g) = 4.93 W/kg; SAR(10 g) = 1.86 W/kg Maximum value of SAR (measured) = 9.86 W/kg 0 dB = 9.86 W/kg = 9.94 dBW/kg Report No.: RDG191226022-20 Page 6 of 98 Test Plot6#: SDR 2.4G 20M_Handheld Back _Mid DUT: DJI Smart Controller Enterprise; Type: RM500-ENT; Serial: RDG191226022-SA-S1 Communication System: SDR 2.4G; Frequency: 2441.5 MHz;Duty Cycle: 1:1.9 Medium parameters used: f = 2441.5 MHz; σ = 1.796 S/m; ε r = 39.948; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.6, 7.6, 7.6) @ 2441.5 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Pha…

Text truncated - open the document above for the full version.

FCC PART 15.247 RSS-GEN, ISSUE 5, MARCH 2019 AMENDMENT 1 RSS-247, ISSUE 2, FEBRUARY 2017 TEST REPORT For SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China FCC ID: SS3-RM500E1910 IC: 11805A-RM500E1910 Report Type: Original Report Product Name: DJI Smart Controller Enterprise Re port Number: RDG191226022-00F Re port Date: 2020-04-21 Reviewed By: Ivan Cao Assistant Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191226022-00F Page 2 of 60 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 DECLARATIONS ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 SUPPORT CABLE LIST AND DETAILS ............................................................................................................................ 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 FCC §15.247 (i) & §1.1310 & §2.1093, RSS-102 CLA…

Text truncated - open the document above for the full version.