SS3-RMYTBA01RoboMaster Youth Tournament Base 01

v1.0 2020.04 User Guide Youth Tournament Base 01 ROBOMASTER 2 © 2020 DJI All Rights Reserved. Disclaimer Thank you for purchasing ROBOMASTER TM Youth Tournament Base 01 (hereinafter referred to as "Base"). Please read this entire document and all safe and lawful practices DJI TM provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree to use this product only for purposes that are proper. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI. This document and all other collateral documents are subject to change at the sole discretion of DJI. For up to date product information, visit www.robomaster.com and click on the product page for this product. Warning 1. The use of any power adapter not provided officially by DJI may affect the lifespan of or cause permanent damage to the product, or result in current leakage causing personal injury. It is imperative to use an official power adapter provided by DJI. 2. Make sure the Base is correctly connected to the power adapter before use. 3. Avoid hitting or impacting the Base with force. Otherwise, the structure may be damaged and the circuit connections may be loosened. 4. If you detect any flames, smoke, burning smells, or other abnormalities after the Base is powered up, disconnect the power supply immediately. 5. Clean off any gel beads scattered on the Base’s structure regularly. Introduction The RoboMaster Youth Tournament Base 01 consists of an intelligent controller, camera, light indicator, and Electronic Visual Marker. Its structural surface has been treated with anodizing sandblasting. The Base carries functions such as hit detection, image display, lighting effects, and voice prompts. It can communicate various status information directly through a speaker, light indicator, or Electronic Visual Marker. The Base is suitable for use in areas such as robotic competition, interactive gaming, scientific research, and education. In the Box Base × 1 Power Adapter × 1* * Varies by region. © 2020 DJI All Rights Reserved. 3 Overview Usage Team Identity After the Base is powered on, the light indicator of the Base and Electronic Visual Marker will display the default light color. The user can determine the Base’s default team identity by the light color. Users may change the default team identity of the Base by connecting to the competition’s engine. For specific ways to do so, please refer to the RoboMaster Champion User Guide. Users may access the document on the RoboMaster official website : https://www.robomaster.com/zh-CN/products/components/detail/3214. Modules Intelligent Controller The intelligent controller can operate at a frequency of 2.4 GHz, 5.1 GHz or 5.8 GHz*. It can be used for tasks such as updating Base firmware, connecting to supporting RoboMaster Champions and real-time transmission of data, and is stable with low latency. * 5.1 GHz only applies to indoor uses. Usage at 5.1GHz must comply with local regulations. Some regions do not allow outdoor uses at such a frequency. CMIIT ID:2019AP12753 1. Intelligent Controller 2. Electronic Visual Marker 3. Light Indicator 4. Power Port 5. Camera 1 2 3 5 4 4 © 2020 DJI All Rights Reserved. Electronic Visual Marker The Electronic Visual Marker consists of an armor and LED dot-matrix displays. A Hit Detector is installed inside each armor, which can detect attacks by any gel bead on the Base. Each LED dot-matrix display is a 7 × 7 dot matrix, formed by 49 LEDs. The default background color of the dot-matrix displays is either red or blue, which indicates the team identity of the Base. The default display characters are 1, 2, and 3, shown on three dot-matrix displays, respectively. Light Indicator The light indicator indicates the team identity of the Base, the current remaining HP, and the connection status between the intelligent controller and the light indicator control panel. If the intelligent controller and light indicator control panel are disconnected, the light indicator will flash yellow. Power Port The power port is used to connect the power adapter to supply power to the Base. Camera The camera uses a 1/4-inch sensor which is capable of recognizing objects with specific characteristics and scanning the QR code of the competition client to connect to the Base and the RoboMaster Champion. Specifications Rated Operating Voltage12 V Rated Working Current2 A Weight6.6 kg Dimensions (Length × Width × Height)620×580×500 mm Operating Temperature Range -10° to 40°C WIFI：802.11 b/g/n Frequency：2.412-2.472GHz，5.180~5.240GHz，5.745~5.825GHz Model：RMYTBA01 and are the trademarks of DJI. Copyright © 2020 DJI All Rights Reserved. WWW.ROBOMASTER.COM FCC Compliance Notice Supplier’s Declaration of Conformity Product na me: RoboMaster Youth Tournament Base 01 Model Number: RMYTBA01 Responsible Party: DJI Technology, Inc. Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502 Website: www.dji.com We, DJI Technology, Inc., being the responsible party, declares that …

Text truncated - open the document above for the full version.

SZ DJI TECHNOLOGY CO., LTD Date: 2022/6/22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: SS3-RMYTBA01 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI TECHNOLOGY CO., LTD This authorization is valid until further written notice from the applicant. Print Name: fajia wang Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SZ DJI TECHNOLOGY CO., LTD We, SZ DJI TECHNOLOGY CO., LTD declare that this EUT (FCC ID: SS3-RMYTBA01) doesn’t have ad Hoc Mode function on “US/Canada frequencies“. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Pr int Name: fajia wang Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SZ DJI TECHNOLOGY CO., LTD TO : Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Re garding: Confidentiality Request regarding application for FCC ID: SS3-RMYTBA01 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Software Security Description T he documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Pr int Name: fajia wang Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0. 0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SZ DJI TECHNOLOGY CO., LTD Address 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,Nanshan District, Shenzhen 518057, Guangdong,China Grantee Code SS3 FCC ID SS3-RMYTBA01 Authorized Contact Name fajia wang Contact Email [email protected] Contact Phone +8675586152250 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-titl e-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2022/6/22 Print Name: fajia wang Title: PM *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 14 Appendix External Photos for GZCR2206000734AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 14 EMC-ARF-02 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 6 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 7 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 8 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 9 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 10 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 11 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 12 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 13 of 14 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 14 of 14 EMC-ARF-02 Rev 1.0

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 15 Appendix Internal Photos for GZCR2206000734AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 15 EMC-ARF-03 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 6 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 7 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 8 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 9 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 10 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 11 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 12 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 13 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 14 of 15 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 15 of 15 EMC-ARF-03 Rev 1.0

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220600073403 Page: 1 of 9 FCC ID: SS3-RMYTBA01 Kobe Jian EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2206000734AT Applicant: SZ DJI TECHNOLOGY CO., LTD Address of Applicant: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen 518057, Guangdong, China Manufacturer: SZ DJI TECHNOLOGY CO., LTD Address of Manufacturer: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen 518057, Guangdong, China Equipment Under Test (EUT): EUT Name: RoboMaster Youth Tournament Base 01 Model No.: RMYTBA01 Trade Mark: DJI Standard(s) : 47 CFR Part 1.1307 47 CFR Part 1.1310 47 CFR Part 2.1091 Date of Receipt: 2022-06-08 Date of Evaluation: 2022-06-09 to 2022-06-14 Date of Issue: 2022-06-15 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073403 EMC-TRF-03 Rev 1.0 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2022-06-15 Original Authori zed for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073403 EMC-TRF-03 Rev 1.0 Page: 3 of 9 2 Evaluation Summary Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073403 EMC-TRF-03 Rev 1.0 Page: 4 of 9 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Evaluation Summary .......................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 5 4.1 Details of E.U.T. ........................................................................................................................... 5 4.2 Evaluating Location ...................................................................................................................... 6 4.3 Facility ......................................................................................................................................... 6 4.4 Deviation from Standards ............................................................................................................. 6 4.5 Abnormalities from Standard Conditions ....................................................................................... 6 5 Radio Spectrum Technical Requirement ........................................................................................... 7 5.1 RF Exposure Compliance Requirement ........................................................................................ 7 5.1.1 Limits ....................................................................................................................................... 7 5.1.2 Test Procedure ........................................................................................................................ 7 5.1.3 EUT RF Exposure Evaluation ................................................................................................... 8 6 EUT Constructional Details (EUT Photos) ......................................................................................... 9 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073403 EMC-TRF-03 Rev 1.0 Page: 5 of 9 4 General Information 4.1 Details of E.U.T. Power supply: Input: 100-240V~ 50-60Hz 0.7A Output: 12.0V/2A 24.0W Adapter model: MX24W1-1202000T For 2.4G: Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz 802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: PCB Antenna Antenna Gain: ANT0&ANT1: 4.5dBi declared by applicant For 5G: Operation Frequency (20MHz): U-NII-1: 5180-5240MHz; U-NII-3: 5745-5825MHz Operation Frequency (40MHz): U-NII-1: 5190-5230MHz; U-NII-3: 5755-5795MHz Modulation Type: 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM) Channel Spacing: 802.11a/n(HT20): 20MHz; 802.11n(HT40: 40MHz DFS Function: Without DFS function TPC Function: Without TPC function Antenna Type: PCB Antenna Antenna Gain: ANT0&ANT1: 4dBi declared by applicant SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073403 EMC-TRF-03 Rev 1.0 Page: 6 of 9 4.2 Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. 4.3 Facility The facility is recognized, certified, or accredited by the following organizations: ● NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Labor…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR220600073401 Page: 1 of 167 FCC ID: SS3-RMYTBA01 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2206000734AT Applicant: SZ DJI TECHNOLOGY CO., LTD Address of Applicant: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen 518057, Guangdong, China Manufacturer: SZ DJI TECHNOLOGY CO., LTD Address of Manufacturer: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen 518057, Guangdong, China Equipment Under Test (EUT): EUT Name: RoboMaster Youth Tournament Base 01 Model No.: RMYTBA01 Trade Mark: DJI Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-06-08 Date of Test: 2022-06-09 to 2022-06-14 Date of Issue: 2022-06-15 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 2 of 167 Revision Record Version Chapter Date Modifier Remark 01 2022-06-15 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 3 of 167 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Duty Cycle ANSI C63.10 (2013) Section 11.6 KDB 558074 D01 v05r02 section 6 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1.3 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Below 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Above 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 4 of 167 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 7 4.4 Test Location ............................................................................................................................... 8 4.5 Test Facility .................................................................................................................................. 8 4.6 Deviation from Standards ............................................................................................................. 9 4.7 Abnormalities from Standard Conditions ....................................................................................... 9 5 Equipment List ..................................................................................................................................10 6 Radio Spectrum Technical Requirement ..........................................................................................14 6.1 Antenna Requirement .................................................................................................................14 6.1.1 Test Requirement: ..................................................................................................................14 6.1.2 Conclusion ..............................................................................................................................14 7 Radio Spectrum Matter Test Results ................................................................................................15 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ..........................................................15 7.1.1 E.U.T. Operation .....................................................................................................................15 7.1.2 Test Mode Description ............................................................................................................15 7.1.3 Test Setup Di…

Text truncated - open the document above for the full version.

EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 76 of 167 Test Mode: 00; Polarity: Vertical; Modulation:802.11b; Bandwidth:20MHz; Channel: High EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 77 of 167 Test Mode: 00; Polarity: Horizontal; Modulation:802.11g; Bandwidth:20MHz; Channel: Low EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 78 of 167 Test Mode: 00; Polarity: Vertical; Modulation:802.11g; Bandwidth:20MHz; Channel: Low EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 79 of 167 Test Mode: 00; Polarity: Horizontal; Modulation:802.11g; Bandwidth:20MHz; Channel: middle EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 80 of 167 Test Mode: 00; Polarity: Vertical; Modulation:802.11g; Bandwidth:20MHz; Channel: middle EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 81 of 167 Test Mode: 00; Polarity: Horizontal; Modulation:802.11g; Bandwidth:20MHz; Channel: High EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 82 of 167 Test Mode: 00; Polarity: Vertical; Modulation:802.11g; Bandwidth:20MHz; Channel: High EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 83 of 167 Test Mode: 00; Polarity: Horizontal; Modulation:802.11n; Bandwidth:20MHz; Channel: Low EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 84 of 167 Test Mode: 00; Polarity: Vertical; Modulation:802.11n; Bandwidth:20MHz; Channel: Low EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 85 of 167 Test Mode: 00; Polarity: Horizontal; Modulation:802.11n; Bandwidth:20MHz; Channel: middle EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 86 of 167 Test Mode: 00; Polarity: Vertical; Modulation:802.11n; Bandwidth:20MHz; Channel: middle EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220600073401 Page: 87 of 167 Test Mode: 00; Polarity: Horizontal; Modulation:802.11n; Bandwidth:20MHz; Channel: High EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: G…

Text truncated - open the document above for the full version.