SS3-TKGS323DJI Goggles 3

SZ DJI TECHNOLOGY CO., LTD. Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: 2024-03-12 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: SS3-TKGS323 SZ DJI TECHNOLOGY CO., LTD. (“the applicant”) certifies that as of the date of the filing of the application, DJI Research LLC (“the agent”) is our designated U.S. agent. We acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: SZ DJI TECHNOLOGY CO., LTD. Contact Person: Gary Zeng Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: 0755-26656677 Email: [email protected] FCC FRN: 0022596753 U.S. Agent Company Name: DJI Research LLC Contact Person: Jinyu Guo Address: 435 Portage Ave, Palo Alto, CA 94306 Tel.: 530-574-9905 Email: [email protected] FCC FRN: 0033569757 Sincerely yours, The Applicant The Agent Company Name SZ DJI TECHNOLOGY CO., LTD. DJI Research LLC Contact Person Gary Zeng Jinyu Guo Signature

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2024-03-12 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: SS3-TKGS323 [SZ DJI TECHNOLOGY CO., LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certificate Manager Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: 0755-26656677 Email: [email protected]

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2024-03-12 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: SS3-TKGS323 [SZ DJI TECHNOLOGY CO., LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certificate Manager Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: 0755-26656677 Email: [email protected]

TCB Authority to Act as Agent Number: MS-0045317 Revision: 0 Effective date: Oct 8, 2021 Page 1 of 1 DJI TECHNOLOGY CO.,LTD. Authority to Act as Agent Date: __2024-03-12____________ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint TUV Rheinland (Shenzhen) Co., Ltd. and TUV Engineer to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with SZ DJI TECHNOLOGY CO.,LTD. Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street,Nanshan District, Shenzhen, China. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: _2024-03-12_ Agreement is valid for 12 months from the above date. By: __________________________ ___________Gary Zeng______________ (Signature) (Print name) __ Certificate manager __________ ____+86 755 26656677______________________ (Title) (Telephone) On behalf of: _ SZ DJI TECHNOLOGY CO.,LTD. (Company Name)

Request for Confidentiality Letter Number: MS0044715 Revision: 1 Effective date: Sep 12, 2022 Author: William Graff Owner: William Graff MS-0044715 Page 1 of 1 Revision 1 Legal Scope: Global Business Scope: Cross Business Process Scope: Cross Process SZ DJI TECHNOLOGY CO., LTD. Date: 02 Feb 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: SS3-TKGS323 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Construction Short Term Permanent Software Security Information SZ DJI TECHNOLOGY CO.,LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _______________________________________________ _______Gary Zeng ____________ (Signature/Title) (Print name) Tel: +86 755 26656677 Email: [email protected]

E-label adopted for this product, with less than 3 step to enter into it. As below: The label information:

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN24F0Q2 006 Auftrags-Nr.: Order no.: 168438695 Seite 1 von 40 Page 1 of 40 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-08-09 Auftraggeber: Client: SZ DJI TECHNOLOGY CO., LTD Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China Prüfgegenstand: Test item: DJI Goggles 3 Bezeichnung / Typ-Nr.: Identification / Type no.: TKGS3 (Trademark: DJI) Auftrags-Inhalt: Order content: FCC approval Prüfgrundlage: Test specification: FCC 47 CFR § 2.1093 IEEE Std 1528-2013 Published RF exposure KDB procedures Wareneingangsdatum: Date of sample receipt: 2024-11-09 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003598699-029 Prüfzeitraum: Testing period: 2024-01-17 –2024-01-18 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Bell Hu genehmigt von: authorized by: X Signed by: Jonathan Li Datum: Date: 2024-02-21 Ausstellungsdatum: Issue date: 2024-02-21 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: SS3-TKGS323 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com Produkte Products Prüfbericht - Nr.: Test Report No. CN24F0Q2 006 Seite 2 von 40 Page 2 of 40 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with…

Text truncated - open the document above for the full version.

Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/17 System Check-D2450V2_H2450 DUT: Dipole 2450 MHz D2450V2 SN:1014 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz; σ = 1.789 S/m; ε r = 39.185; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.98, 7.98, 7.98) @ 2450 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=250 mW/Area Scan (71x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 22.0 W/kg Pin=250 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 110.6 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 26.9 W/kg SAR(1 g) = 12.7 W/kg; SAR(10 g) = 5.86 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 47.7% Maximum value of SAR (measured) = 21.3 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/18 System Check-D5GHz_H5250 DUT: Dipole D5GHzV2 SN:1280 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5250 MHz; σ = 4.735 S/m; ε r = 36.296; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(5.48, 5.48, 5.48) @ 5250 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.6 W/kg Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 72.76 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 32.9 W/kg SAR(1 g) = 8.03 W/kg; SAR(10 g) = 2.28 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 64.6% Maximum value of SAR (measured) = 18.7 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/18 System Check-D5GHz_H5800 DUT: Dipole D5GHzV2 SN:1280 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5800 MHz; σ = 5.306 S/m; ε r = 35.499; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(4.95, 4.95, 4.95) @ 5800 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.8 W/kg Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 71.57 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 39.9 W/kg SAR(1 g) = 8.49 W/kg; SAR(10 g) = 2.38 W/kg Smallest distance from peaks to all points 3 dB below = 7.4 mm Ratio of SAR at M2 to SAR at M1 = 60.2% Maximum value of SAR (measured) = 20.9 W/kg

Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/17 P01 802.11b_inside of goggles_Ch1 DUT: EUT Communication System: 802.11b; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2412 MHz; σ = 1.749 S/m; ε r = 39.336; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.98, 7.98, 7.98) @ 2412 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) -Area Scan (71x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.283 W/kg - Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.939 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.413 W/kg SAR(1 g) = 0.207 W/kg; SAR(10 g) = 0.106 W/kg Smallest distance from peaks to all points 3 dB below = 11.6 mm Ratio of SAR at M2 to SAR at M1 = 51.8% Maximum value of SAR (measured) = 0.340 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/18 P02 802.11n_HT20_inside of goggles_Ch36 DUT: EUT Communication System: 802.11n; Frequency: 5180 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5180 MHz; σ = 4.664 S/m; ε r = 36.396; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(5.48, 5.48, 5.48) @ 5180 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) -Area Scan (91x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.540 W/kg - Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 0.851 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.784 W/kg SAR(1 g) = 0.188 W/kg; SAR(10 g) = 0.050 W/kg Smallest distance from peaks to all points 3 dB below = 5.6 mm Ratio of SAR at M2 to SAR at M1 = 64.8% Maximum value of SAR (measured) = 0.484 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/18 P03 802.11n_HT20_inside of goggles_Ch165 DUT: EUT Communication System: 802.11n; Frequency: 5825 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5825 MHz; σ = 5.33 S/m; ε r = 35.467; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(4.95, 4.95, 4.95) @ 5825 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) -Area Scan (91x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.209 W/kg - Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 0.4910 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.436 W/kg SAR(1 g) = 0.057 W/kg; SAR(10 g) = 0.016 W/kg Smallest distance from peaks to all points 3 dB below = 4.9 mm Ratio of SAR at M2 to SAR at M1 = 58.1% Maximum value of SAR (measured) = 0.195 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/17 P04 SDR-2.4G_20M_inside of goggles_Ch Mid_Antenna 3 DUT: EUT Communication System: SDR; Frequency: 2437.5 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2437.5 MHz; σ = 1.776 S/m; ε r = 39.234; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.98, 7.98, 7.98) @ 2437.5 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) - Area Scan (51x111x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 5.09 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.652 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 5.46 W/kg SAR(1 g) = 3.13 W/kg; SAR(10 g) = 1.63 W/kg Smallest distance from peaks to all points 3 dB below = 12.6 mm Ratio of SAR at M2 to SAR at M1 = 60.8% Maximum value of SAR (measured) = 4.55 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/18 P05 SDR-5.1G_40M_inside of goggles_Ch Mid_Antenna 0_Degree 60 DUT: EUT Communication System: SDR; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5200 MHz; σ = 4.685 S/m; ε r = 36.379; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(5.48, 5.48, 5.48) @ 5200 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) - Area Scan (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.31 W/kg - Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 4.838 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 2.15 W/kg SAR(1 g) = 0.691 W/kg; SAR(10 g) = 0.272 W/kg Smallest distance from peaks to all points 3 dB below = 9.1 mm Ratio of SAR at M2 to SAR at M1 = 69.7% Maximum value of SAR (measured) = 1.43 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2024/1/18 P06 SDR-5.8G_20M_inside of goggles_Ch Low_Antenna 1_Degree 60 DUT: EUT Communication System: SDR; Frequency: 5735.5 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5735.5 MHz; σ = 5.24 S/m; ε r = 35.587; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(4.95, 4.95, 4.95) @ 5735.5 MHz; Calibrated: 2023/6/29 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2023/7/6 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement S…

Text truncated - open the document above for the full version.

Justification for Extended SAR Dipole Calibrations Dipole Date of Measurement Return Loss (dB) Delta (%) Impedance (ohm) Delta (ohm) Head 2450MHz May 19, 2021 -28.3 -2.71 53.8 -4.17 May 17, 2022 -27.5 49.7 Note: The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification results meet the requirement of extended calibration. Justification for Extended SAR Dipole Calibrations Dipole Date of Measurement Return Loss (dB) Delta (%) Impedance (ohm) Delta (ohm) Head 2450MHz May 19, 2021 -28.3 5.66 53.8 -0.72 May 20, 2023 -29.9 53.1 Note: The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification results meet the requirement of extended calibration. Justification for Extended SAR Dipole Calibrations Dipole Date of Measurement Return Loss (dB) Delta (%) Impedance (ohm) Delta (ohm) Head 5250MHz May 17, 2021 -27.7 -4.98 50.3 -3.13 May 17, 2022 -26.4 47.1 Head 5600MHz May 17, 2021 -33.8 -0.21 51.4 -2.94 May 17, 2022 -33.7 48.4 Head 5800MHz May 17, 2021 -24.7 8.14 53.3 -2.43 May 17, 2022 -26.7 50.8 Note: The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification results meet the requirement of extended calibration. Justification for Extended SAR Dipole Calibrations Dipole Date of Measurement Return Loss (dB) Delta (%) Impedance (ohm) Delta (ohm) Head 5250MHz May 17, 2021 -27.75 0.77 50.25 -2.64 May 08, 2023 -27.96 47.61 Head 5600MHz May 17, 2021 -33.81 -3.59 51.38 -2.82 May 08, 2023 -32.60 48.56 Head 5800MHz May 17, 2021 -24.73 10.12 53.28 -3.74 May 08, 2023 -27.23 49.54 Note: The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification results meet the requirement of extended calibration.

1 ZV902 BT/WIFI Antenna Datasheet__ Revision history VersionChange notesModificatorDate V1.0Alaan.he 1 Basic Specifications No.SpecificationDescriptionsNotes 1Antenna Name WIFI Antenna 2Brand DJI 3Operation Frequency 2.4~2.485GHz; 5.15~5.25GHz 5.725~5.875GHz 4Connector Type 无 5Impedance50ohm 6Gain [email protected]~2.483GHz [email protected]~5.25GHz [email protected]~5.875GHz 7Efficiency ≥ 35% 8VSWR≤ 3 9Polarization typeLinear 103dB BeamwidthOmnidirectional horizon 11Weight/ 2 Gain & Efficiency Frequency/Mhz Efficiency / dB Efficiency / % MaxGain/dBi 2400-3.1248.752.45 2410-3.0849.22.31 2420-2.9151.174.00 2430-2.852.482.5 2440-2.84522.43 2450-2.654.952.4 2460-2.8651.762.01 2470-2.5555.592.1 2480-2.7852.721.65 5150-3.2647.215.00 5200-3.1548.423.78 5250-3.1748.194.05 5750-2.8551.883.50 5800-3.1348.643.40 5850-2.9151.173.45 3 radiation pattern 2.4 5.2GHz &5.8GHz Theta=90 Phi=0 Phi=90

1 DJI Antenna Datasheet ___ZV902 antenna_2/3___ __ 2023-09-04 Revision history Version Change notes Modificator Date V1.0 First draft. Stephen.Wan 2023.09.04 1 DJI Antenna Datasheet 1、 Basic Specifications No. Specification Descriptions Notes 1 Antenna Name ZV902 Ant2/3 2 Brand DJI 3 Operation Frequency 2.4~2.483GHz; 5.15~5.25GHz 5.725~5.85GHz 4 Connector Type Ipex-1 5 Impedance 50ohm 6 Gain [email protected]~2.483GHz sdr [email protected]~5.25GHz [email protected]~5.875GHz sdr 7 Efficiency ≥50% SDR 8 VSWR ≤2 9 Polarization type Linear 10 3dB Beamwidth Omnidirectional horizon 11 Weight 12 Antenna type Dipole 2、 Antenna Return Loss/VSWR 2.1 SDR antenna return loss 3、 Antenna Gain 校准日期：2023/08/31 测试方法：近场转台测试 测试暗室型号：Satimo SG24 天线摆放位置参考坐标系： 3.1 sdr Frequency Efficiency Gain(dBi) 2400MHz 47% 2.4 2410MHz 49% 2.4 2420MHz 47% 2.5 2450MHz 49% 3.5 2470MHz 50% 2.3 2483MHz 48% 2.2 Frequency Efficiency Gain(dBi) 5150MHz 47% 3.2 5200MHz 49% 3.5 5250MHz 47% 3.4 Frequency Efficiency Gain(dBi) 5725MHz 47% 3.2 5775MHz 49% 3.4 5800MHz 46% 3.4 5825MHz 49% 3.5 5850MHz 44% 3.3 4、 Radiation Pattern 4.1 sdr antenna radiation pattern Ant2 Ant3 5、 Structure drawing 5.1 SDR antenna Name of the antenna manufacturer：Shenzhen ZTX Communication Technology Co., LTD. Address of the antenna manufacturer：No.34 Shilong Road, Bao’an Dsitrict, Shenzhen, Guangdong Province Website of the antenna manufacturer：www.ztxun.com DJI Antenna Datasheet ___ZV902 antenna_0/1___ __ 2023-08-31 Revision history Version Change notes Modificator Date V1.0 First draft. Stephen.Wan 2023.08.31 1 DJI Antenna Datasheet 6、 Basic Specifications No. Specification Descriptions Notes 1 Antenna Name ZV902 Ant0/1 2 Brand DJI 3 Operation Frequency 2.4~2.483GHz; 5.15~5.25GHz 5.725~5.85GHz 4 Connector Type Ipex-1 5 Impedance 50ohm 6 Gain [email protected]~2.483GHz sdr [email protected]~5.25GHz sdr [email protected]~5.875GHz sdr 7 Efficiency ≥50% SDR 8 VSWR ≤2 9 Polarization type Linear 10 3dB Beamwidth Omnidirectional horizon 11 Weight 12 Antenna type Dipole 7、 Antenna Return Loss/VSWR 2.1 SDR antenna return loss 8、 Antenna Gain 校准日期：2023/08/31 测试方法：近场转台测试 测试暗室型号：Satimo SG24 天线摆放位置参考坐标系： 3.1 sdr Frequency Efficiency Gain(dBi) 2400MHz 58% 1.42 2410MHz 59% 1.50 2420MHz 54% 2.00 2450MHz 59% 1.77 2470MHz 52% 1.11 2483MHz 53% 1.21 Frequency Efficiency Gain(dBi) 5150MHz 59% 1.20 5200MHz 56% 1.50 5250MHz 54% 1.40 Frequency Efficiency Gain(dBi) 5725MHz 57% 2.50 5775MHz 59% 2.49 5800MHz 56% 2.38 5825MHz 59% 2.02 5850MHz 54% 2.27 9、 Radiation Pattern 4.1 sdr antenna radiation pattern Technology Co., LTD. Address of the antenna manufacturer：No.34 Shilong Road, Bao’an Dsitrict, Shenzhen, Guangdong Province Website of the antenna manufacturer：www.ztxun.com

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN24F0Q2 003 Auftrags-Nr.: Order no.: 168438695 Seite 1 von 26 Page 1 of 26 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-08-09 Auftraggeber: Client: SZ DJI TECHNOLOGY CO., LTD Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China Prüfgegenstand: Test item: DJI Goggles 3 Bezeichnung / Typ-Nr.: Identification / Type no.: TKGS3 (Trademark: DJI) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR47 FCC Part 15: Subpart C Section 15.247 RSS-247 Issue 3 August 2023 RSS-Gen Issue 5 February 2021 Wareneingangsdatum: Date of sample receipt: 2023-11-13 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003598699-029~032 A003598699-014, 024 Prüfzeitraum: Testing period: 2023-11-24 - 2024-01-09 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Bell Hu genehmigt von: authorized by: X Signed by: Jonathan Li Datum: Date: 2024-02-21 Ausstellungsdatum: Issue date: 2024-02-21 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: SS3-TKGS323, IC: 11805A-TKGS323, PMN: DJI Goggles 3, HVIN: TKGS3 This report is for 2.4GHz SDR, 2.4GHz Wi-Fi and 2.4GHz. Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g…

Text truncated - open the document above for the full version.