SS41SCMTCRADLE

MT760 www.bluebirdsoft.com Hours Mon. ~ Fri. : 9:30 A.M. ~ 6:30 P.M. (GMT Time: +9 Hours) We are not open on Saturday, Sundays and National Holidays. Address Customers service center, SSang-young IT twintower B 703, Sangdaewon-dong 442-5, Joongwon-gu, Sungnam-si, Keonggi-do, Korea Bluebird constantly strives to bring utmost satisfaction to all our customers. Customers Service Center Touch Mobile Payment Terminal User’s Manual . Please read the following warnings before using the product. . Shapes and colors of the images shown in this manual may dier from the actual products. . Contents of the manuals may dier based on the software version of products or conditions of the wireless provider. • This user manual is protected by copyright. • This user manual has been created by the Bluebird Soft. We have done our best not to create typos, editing errors, and leaving out any information. Please understand if there are any inconveniences. • This product’s program is legally protected. Illegal copying, transmitting, or erasing of the program is prohibited. • This product’s partial functions might have problems from the environment, user program, and other machines. • This radio equipment will not be able to use related to the safety of life because there is possibility for radio interference. REGISTERED TRADEMARK User’s guidance PIDION as the future mobile’s leading global brand, expresses with reliability, representativeness, and image of advanced technology. It is a registered trademark from the global brand of Bluebird Soft. and is copyright protected. ※ Please read warnings and cautious before use. Device typeUser’s guidance A-level (IT Device at work) This device is registered as suitable for electromagnetic wave use at workplace. It should be appropriately considered by dealers or users. If you sell or buy this device by mistake, please replace it with a product for home use. Type registration This wireless device may cause propagation interference, and so, it cannot be used for life-saving services. 2 MT760 MANUAL This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept ant interference received, including interference that may cause undesirable operation. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. The antenna must be installed such that 0 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. End users cannot modify this transmitter device. Any Unauthorized modification could void the user`s authority to operate this device. Hereby, Bluebird Soft Inc. declares that this MT760 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. FCC (Federal Communications Commission) CE 3 MT760 MANUAL Contents 4 MT760 MANUAL Notice Before Using Device .................................... 5 Precautions Before Using Battery ............................. 6 About the product .............................................. 7 1. Checking components .......................................... 7 2. Checking names of parts ........................................ 8 3. Buttons ......................................................... 9 Changing the printing paper .................................. 9 1. Opening the Printer Cover ...................................... 9 2. Closing Paper Roll Cover ........................................ 10 3. Direction for Receipt Cut ........................................ 10 Paying with card ................................................ 11 1. Paying with MSR ................................................ 11 2. Paying with IC Card ............................................. 11 3. Contactless ..................................................... 11 Learning Basics ................................................. 12 1. Insert / Remove the battery ..................................... 12 1-1. Insert the battery ........................................... 12 1-2 Removing the battery ....................................... 12 2. Insert / Remove the USIM card .................................. 13 2-1. Insert the USIM card ........................................ 13 2-2. Removing the USIM card .................................... 14 3. Insert / Remove the microSD card ............................... 14 2-1. Insert the microSD card ..................................... 14 2-2. Removing microSD card .................................... 15 4. To Connect the Terminal Power .................................. 16 5. Charging with Cradle ............................................ 17 Device Specifications ........................................... 18 Q & A ............................................................. 19 Service Center ................................................... 20 Warranty Certificate ............................................ 22 Notice Before Using Device 5 MT760 MANUAL • This device is qualified for the standard of the safety of human body against electromagnetic wave. For your own safety, please use certified devices provided by headquarter. If not the case, we cannot guarantee your safety. • Do not press power button on the device if the device is wet or do not touch adapter or power cord with wet hands. There is risk of electric shock. • Do not remodel, take apart, or repair the device. Please refer to your customer service center. If not the case, you will not be able to get your free repair service. • Please follow instructions when using the battery. • Do not use your device at an explosive danger zone. • In case your device is wet, do not put your device in heaters, microwaves, or etc to dry- there is a risk of explosion or it can be the cause of malfunction. (Please note there is a label i…

Text truncated - open the document above for the full version.

Bluebird Soft Inc. 1242, Gaepo-dong, Gangnam-gu, Seoul, Korea Date: March 05, 2013 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA DECLARATION FOR ADDITIONAL FREQUENCY HOPPING REQUIREMENTS To whom it may concern: We hereby declare that the Bluetooth of SS41SCMT meet following FCC requirements of the Section 15.247(a)(1) : 1. The hopping sequence is pseudorandom. 2. All channels are used equally on average. 3. The receiver input bandwidth approximately equal the transmit bandwidth. 4. The receiver hop in sequence with the transmit signal. Attestation for hopping requirements Section 15.247 (a) The EUT contains a transmitter that modulates a carrier with data, changes carrier frequency in a pseudo-random pattern with a dwell time, channel separation, and hop count that meets the requirements of 15.247. In addition, the receiver tracks the transmitter’s pseudo-random hopping sequence and demodulates the signal. The order of channels in the hop sequence is pseudo random list. Frequency-hopping proceeds in order through the list. Equal Hopping Frequency Use [Section 15.247 (g)] Each Frequency is specified only once in the list and the list is completed before looping back to the beginning. Section 15.247 (h) Since the device is programmed to follow a set hopping sequence, regardless of potential interference and it is not programmed to scan the channels for interference, it does not have the ability to coordinate with other FHSS systems in an effort to avoid the simultaneous occupancy of individual frequencies. Pseudorandom frequency generator for frequency hopping In the firmware code is inserted an array of 79 elements (named RF_channel) corresponding to 79 frequencies: the first frequency is 2402MHz and the others are Fi = 2402 + i*1MHz where i is the index of the array (0 ≤ i ≤ 78) Example of the hopping channels [43] [1] [2] [27] [49] [22] [13] [39] [32] [21] [41] [45] [78] [47] [5] [46] [13] [15] [36] [21] [11] [4] [49] [17] [4] [11] [16] [33] [42] [47] [1] [12] [3] [39] [0] [49] [39] [4] [21] [17] [44] [10] [11] [25] [6] [7] [3] [0] [39] [13] [28] [39] [13] [22] [39] [45] [23] [44] [9] [7] [8] [11] [28] [49] [13] [4] [39] [17] [77] [51] [44] [32] [13] [6] [65] [45] [48] [54] [15] [48] [2] [15] [30] [2] [43] [31] [3] [10] [4] [56] [15] [40] [35] [20] [4] [2] [39] [19] [39] [24] [55] [24] [36] [32] [12] [27] [14] [21] [1] [5] [3] [18] [23] [38] [8] [19] [11] [25] [7] [27] [0] [36] [43] [42] [60] [32] [0] [9] [35] [13] [59] [5] [34] [37] [46] [32] [7] [33] [12] [24] [20] [31] [44] [39] [41] [28] [48] [43] [21] [0] [43] [0] [73] [13] [9] [17] [14] [0] [13] [38] [22] [31] [40] [45] [8] [0] [41] [38] [49] [32] [26] [15] [37] [50] [3] [0] [26] [43] [17] [35] [44] [4] [49] [17] [43] [63] [44] [23] [44] [15] [43] [41] [2] [19] [48] [8] [10] [39] [72] [21] [4] [10] [19] [7] [6] [43] [8] [10] [43] [7] [74] [13] [0] [22] [17] [39] [34] [27] [35] [18] [10] [16] [25] [32] [35] [28] [22] [0] [17] [4] [17] [37] [26] [3] [17] [27] [45] [66] [0] [17] [39] [35] [32] [22] [15] [38] [20] [23] [67] [13] [22] [4] [4] [39] [32] [49] [32] [0] [22] [21] [31] [11] [12] [26] [7] [17] [21] [56] [4] [22] [39] [39] [7] [35] [0] [23] [12] [14] [40] [13] [18] [39] [8] [32] [70] [49] [8] [45] [14] [28] [1] [35] [29] [13] [10] [22] [49] [39] [11] [35] [71] [22] [43] [39] [35] [72] [5] [34] [37] [70] [41] [24] [19] [24] [9] [23] [15] [42] [15] [2] [36] [33] [17] [65] [17] [48] [28] [11] [35] [30] [78] [51] [75] [61] [68] [51] [54] [66] [62] [64] [60] [73] [76] Sincerely, Joo-Hyung Lee Director

Bluebird Soft Inc. 1242, Gaepo-dong, Gangnam-gu, Seoul, Korea Date: February 28, 2013 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA LETTER OF AUTHORIZATION We, the undersigned, hereby authorize Harvey Sung of DIGITAL EMC CO., LTD. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: SS41SCMT including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of DIGITAL EMC CO., LTD. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Bluebird Soft Inc. Sincerely, Joo-Hyung Lee Director

Bluebird Soft Inc. 1242, Gaepo-dong, Gangnam-gu, Seoul, Korea Date: February 28, 2013 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA RE: Request of Confidentiality for FCCID: SS41SCMT To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Bluebird Soft Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Bluebird Soft Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 Part Lists SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Joo-Hyung Lee Director

FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 1 FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 2 FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 3

FCC ID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase The label is attached to this device by an adhesive. The adhesive is permanent type with strong strength. Additionally, the label is readily to the purchaser at the time of purchase.

FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 1 FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 2 FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 3 FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 4 FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 5 FCCID: SS41SCMT Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. View 6 <BT Antenna>

Approval Sheet Type : Dielectric Chip Antenna Part No. : AMAN1003030BB01 Application : Bluetooth Customer Model : 1SC-MT Bluebird Soft Plan Evaluation Decision Date AMOTECH Written Checked Approval Date 09/28 09/28 09/28 09/28 2012. 09. 28 AMOTECH Co., Ltd. TBBP-A FREE AMOTECH 2 /17 Dielectric Chip Antenna Content 1. Revision ------------------------ 3 2. Specifications ------------------------ 4 2.1 Electrical Specification ------------------------ 2.2 Mechanical Specification ------------------------ 6 2.3 Part No. & Lot No. ------------------------ 3. Measurement Methods ------------------------ 7 3.1 VSWR ------------------------ 3.2 Radiation Gain ------------------------ 4. Inspection data sheet ------------------------ 8 5. Recommendations soldering conditions ------------------------ 10 5.1 Unleaded soldering temperature conditions ------------------------ 5.2 PCB Pattern design terms ------------------------ 6. Structure and Material ------------------------ 12 8.1 Material ------------------------ 8.2 Equivalent Circuit ------------------------ 7. Notice ------------------------ 13 8. Packing ------------------------ 14 8.1 Carrier tape ------------------------ 8.2 Reel ------------------------ 8.3 BOX Packing ------------------------ 8.4 Packaging label ------------------------ 9. Hazardous material report ------------------------ 17 * Appendix AMOTECH 3 /17 Dielectric Chip Antenna 1. Revision Date Content Page 2012.09.28 New AMOTECH 4 /17 Dielectric Chip Antenna 2. Specifications 2.1 Electrical Specification Division Item Specification Remark 1 VSWR On The SET Max 3.0:1 @ 2442 ± 42 MHz 2 On the E.V.B Max 3.0:1 @ 2442 ± 42 MHz 3 Reference JIG Max 2.5:1 @ 2294 ± 42 MHz 4 Radiation Gain Avg. -3.5 - dBi - Measured on BIP1500 SET Peak 1.4 5 Radiation Pattern Omni-directional - 6 Impedance Nominal 50 Ω (On the SET) AMOTECH 5 /17 Dielectric Chip Antenna (On the E.V.B) (On reference Jig) AMOTECH 6 /17 Dielectric Chip Antenna [Radiation Pattern On The Set] AMOTECH 7 /17 Dielectric Chip Antenna 2.2 Mechanical Specifications Item dimension (mm) L (Length) 10.0±0.15 W (Width) 3.0±0.1 H (Height) 3.0±0.1 AMOTECH 8 /17 Dielectric Chip Antenna 2.3 Part No. & Lot No. Model : (1) : AMOTECH ANTENNA (2) : Chip size (3) : BlueBird (4) : Version Lot: (1) : Year of forming corpuscle (2) : small body molding, (3) : dielectric constant. For example) 1 : 9.5, 2 : 20.5 (4) : A body SIZE. For example) A : 542012, B : 542015, C: 903012, D : 903015, E:903040, F: 903045, G:542020 (5) : TYPE of production times corpuscle stars ◀ V 11 J 6 (1) (2) (3) (4) (5) (1) : Identifies the direction display (2) : Model display (3) : Manufacturing year display (4) : Display manufacture (for example: A-1, B-2) (5) : Manufacturing jobs (for example, 1~9-1 to 9, A to W-10~31) AMAN 1003030 BB 01 (1) (2) (3) (4) XX XX X X XX (1) (2) (3) (4) (5) AMOTECH 9 /17 Dielectric Chip Antenna 3. Measurement Methods 3.1 VSWR Product specification reference 3.2 Measurement Methods A) RF Cable Calibration - Center frequency : Product specification reference - Span : 800MHz - Number of point : 801 B) RF Cable, Jig SMA Connector Conect. C) Format = VSWR D) MARKER1, MARKER2, MARKER3 set the VSWR value. E) MARKER1,2,3 Make sure you meet the VSWR value SPEC. AMOTECH 10 /17 Dielectric Chip Antenna 4. Inspection data sheet Product Dielectric Chip Antenna Test Items VSWR, Length, Width, Height Model AMAN1003030BB01 Condition LOT NO. Date. 2012. 09. 27 Test Items VSWR @2306 - 42MHz (2264MHz) VSWR @2306 +42MHz (2348MHz) Length Width Height Appearance 10.0(mm) 3.0(mm) 3.0(mm) SPEC 2.5 : 1 2.5 : 1 10.0±0.15 3.0±0.10 3.0±0.10 OK 1 1.50 1.62 10.00 2.99 2.98 OK 2 1.61 1.35 10.00 2.97 2.99 OK 3 1.38 1.69 10.01 3.00 2.97 OK 4 1.77 1.79 10.02 3.00 3.00 OK 5 1.47 1.75 10.02 2.99 3.00 OK 6 1.55 1.77 10.02 3.01 2.99 OK 7 1.39 1.52 10.02 2.99 3.00 OK 8 1.70 1.63 10.01 3.00 3.00 OK 9 1.65 1.51 10.00 3.00 2.98 OK 10 1.51 1.43 10.03 3.00 3.01 OK 11 1.65 1.80 10.00 2.99 3.01 OK 12 1.36 1.63 10.02 2.98 3.00 OK 13 1.57 1.68 10.03 2.99 3.00 OK 14 1.57 1.77 9.99 2.98 3.02 OK 15 1.86 1.80 10.01 3.00 2.98 OK 16 1.52 1.71 10.00 2.97 3.00 OK 17 1.65 1.38 10.00 3.00 3.00 OK 18 1.82 1.67 10.01 3.00 3.00 OK 19 1.46 1.60 10.01 2.98 2.99 OK 20 1.74 1.41 10.02 2.99 2.99 OK 21 1.60 1.86 10.01 2.99 3.00 OK 22 1.53 1.54 10.00 3.00 3.01 OK 23 1.82 1.51 10.00 2.98 3.00 OK 24 1.85 1.70 10.01 3.00 3.00 OK 25 1.49 1.70 10.01 2.99 2.99 OK 26 1.61 1.49 10.00 3.00 3.00 OK 27 1.68 1.78 10.00 2.99 2.98 OK 28 1.54 1.37 10.00 3.00 3.01 OK 29 1.31 1.78 9.99 2.99 3.00 OK 30 1.34 1.59 10.02 2.98 2.99 OK AVG 1.583 1.628 10.01 2.99 3.00 - STDEV 0.153 0.147 0.011 0.010 0.011 - Cpk 1.997 1.978 1.462 1.550 1.462 - Judgment OK OK OK OK OK OK AMOTECH 11 /17 Dielectric Chip Antenna 5. Reliability Test Condition Division Item Test Condition Requirements 1 Adhesion strength 1. SMT PCB in the sample fell, until the power Increase 1. No mechanical damage by forces Applied on the right. 2. Strength (F) > 5kgf 2 Thermal shock 1. +80°C(30min)→1~2mim →-40°C (30min) 2. Cycle Number : 10 1.No damage on appearance 2. Meet the specification (VSWR) 3 High temp. resistance 1. temperature: + 125 ± 5 °C 2. time: 1000 ± 24 hours 3. wait at least 24 hours at room temperature after the measurement ※ From the PCB test 1.No damage on appearance 2. Meet the specification (VSWR) 4 Low temp. resistance 1. temperature: : -40 ± 5°C 2. time : 1000 ± 24 hours 3. wait at least 48 hours at room temperature after the measurement ※ From the PCB test 1.No damage on appearance 2. Meet the specification (VSWR) 5 humidity 1. humidity : 85 % RH 2. temperature : +85 ± 3°C 3. time : 1000 ± 24 hour 4. temperature after the measurement ※ From the PCB test 1.No damage on appearance 2. Meet the specification (VSWR) 6 ESD 1. ESD Level : 8KV 2. Mode : Contact discharge 3. Test: Count : 100회 ※ From the PCB test 1.No damage on appearance 2. Meet the specification (VSWR) 앞면 뒷면 앞면 F AMOTECH 12 /17 Dielectric Chip Antenna 6. Recommendations soldering c…

Text truncated - open the document above for the full version.

FCCID: SS41SCMT DEMC1208-01646 Report No.: DRTFCC1303-0200 TRF-RF-212(00)101214 Page2 / 68 Copyright ○ C 2013, Digital EMC Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1303-0200 Mar. 05, 2013 Final version for approval FCCID: SS41SCMT DEMC1208-01646 Report No.: DRTFCC1303-0200 TRF-RF-212(00)101214 Page3 / 68 Copyright ○ C 2013, Digital EMC Co., Ltd. Table of Contents 1.General Information ................................................................................................................ 5 1.1 Testing Laboratory ........................................................................................................ 5 1.2 Details of Applicant ....................................................................................................... 5 1.3 Description of EUT ........................................................................................................ 5 1.4. Declaration by the manufacturer ................................................................................... 5 1.5. Information about the FHSS characteristics: ............................................................... 6 1.6. Test Equipment List ........................................................................................................ 7 1.7. Summary of Test Results ................................................................................................ 8 1.8 Conclusion of worst-case and operation mode ............................................................ 9 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission .......... 10 2.1. Test Setup ....................................................................................................................... 10 2.2. Limit ................................................................................................................................ 10 2.3. Test Procedures ............................................................................................................ 11 2.3.1. Test Procedures for Radiated Spurious Emissions .............................................. 11 2.3.2. Test Procedures for Conducted Spurious Emissions .......................................... 11 2.4. Test Results .................................................................................................................... 12 2.4.1. Radiated Emission .................................................................................................... 12 2.4.2. Conducted Spurious Emissions ............................................................................. 15 3. Carrier Frequency Separation............................................................................................. 33 3.1.Test Setup...................................................................................................................... 33 3.2. Limit ................................................................................................................................ 33 4.Number of Hopping Frequencies ........................................................................................ 38 4.1.Test Setup...................................................................................................................... 38 4.2. Limit ................................................................................................................................ 38 5. 20dBc BW .............................................................................................................................. 47 5.1. Test Setup ....................................................................................................................... 47 5.2. Limit ................................................................................................................................ 47 5.3. Test Procedure .............................................................................................................. 47 5.4. Test Results .................................................................................................................... 47 6. Time of Occupancy (Dwell Time) ........................................................................................ 53 6.1. Test Setup ....................................................................................................................... 53 6.2. Limit ................................................................................................................................ 53 6.3. Test Procedure .............................................................................................................. 53 6.4. Test Results .................................................................................................................... 53 7. Maximum Peak Output Power Measurement .................................................................... 58 7.1. Test Setup ....................................................................................................................... 58 7.2. Limit ................................................................................................................................ 58 7.3. Test Procedure ............................................................................................................... 58 7.4. Test Results .................................................................................................................... 58 8. Transmitter AC Power Line Conducted Emission ............................................................ 64 FCCID: SS41SCMT DEMC1208-01646 Report No.: DRTFCC1303-0200 TRF-RF-212(00)101214 Page4 / 68 Copyright ○ C 2013, Digital EMC Co., Ltd. 8.1. Test Setup ....................................................................................................................... 64 8.2. Limit .............................................................................................................................…

Text truncated - open the document above for the full version.