SS4BIP12X0Industrial PDA

-Before getting started, ensure that you read and follow the “Safety Warnings and Precautions”section of this manual. Safety Warnings and Precautions Safety Warnings and Precautions ! Warning •Exercise precautions when using the battery. - Always completely charge the battery after purchasing the product. - If the batteries are damaged, severely shocked, heated, exposedto moisture or high temperatures, or bored by a gimlet, they may explode. - Do not use inferior quality batteries or battery chargers as doing so may cause explosion. ! Precautions •Learn how to properly use the antenna. - For terminals with an antenna, hold the terminal like a normal telephone, and place the antenna straight over your shoulder. •Never touch power outlets with wet hands or mobile phones. - This may cause electric shock. •Never insert or place the terminal, battery, or charger into or near heating devices, such as heaters or electronic ovens. - This may cause product transformation, explosion, or fire. •Never reconstruct, disassemble, or repair the product arbitrarily. - Always contact a service center authorized by Bluebird Soft. - Ensure that you adhere to the Safety Warnings and Precautions. If these principles are not adhered to, free repair service will not be offered. •Use only accessories and batteries provided or authorized by Bluebird Soft. - Not adhering to this advice may cause battery explosion, or defect in the terminal. ! Warning •Exercise precautions when using the battery. - Always completely charge the battery after purchasing the product. - If the batteries are damaged, severely shocked, heated, exposedto moisture or high temperatures, or bored by a gimlet, they may explode. - Do not use inferior quality batteries or battery chargers as doing so may cause explosion. ! Precautions •Learn how to properly use the antenna. - For terminals with an antenna, hold the terminal like a normal telephone, and place the antenna straight over your shoulder. •Never touch power outlets with wet hands or mobile phones. - This may cause electric shock. •Never insert or place the terminal, battery, or charger into or near heating devices, such as heaters or electronic ovens. - This may cause product transformation, explosion, or fire. •Never reconstruct, disassemble, or repair the product arbitrarily. - Always contact a service center authorized by Bluebird Soft. - Ensure that you adhere to the Safety Warnings and Precautions. If these principles are not adhered to, free repair service will not be offered. •Use only accessories and batteries provided or authorized by Bluebird Soft. - Not adhering to this advice may cause battery explosion, or defect in the terminal. Table of Contents Table of Contents 1. Product Composition 2. Getting Started 3. Precautions 4. Using Barcode 5. Using Wireless LAN Features 6. Connecting BIP-1250 to Desktop 1. Product Composition 2. Getting Started 3. Precautions 4. Using Barcode 5. Using Wireless LAN Features 6. Connecting BIP-1250 to Desktop 4 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-1250 Series 1.Product Composition 1.Product Composition 1.Product Composition 1. Product Composition 2. Getting Started 3. Precautions 4. Using Barcodes 5. Using Wireless LAN Features 6. Connecting BIP-1250 to Desktop 5 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-1250 Series 1.Product Composition 1.Product Composition 1.Product Composition 1-1. Inspecting Components Before using the product, inspect the contents of your package box for all the components shown below: [One Main body of BIP-1250] [One Stylus Pen] [One Battery for BIP-1250] [Warranty] [One Cradle for BIP-1250] [Power Cable(AC Adapter)] [PDA BOX] [ACCESSORY BOX] 6 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-1250 Series 1.Product Composition 1.Product Composition 1.Product Composition 1-2. Hardware Specifications Acquaint yourself with the basic parts and names of the terminal using the following figures: 7 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-1250 Series 1 ) Antenna: device for receiving radio waves 2 ) Printer - When you authorize a payment with your credit card, payment details are printed out automatically. - As there is a built-in cutter, the receipt can be easily removed without the use of a knife or scissors.. 3 ) Card leader: device to read a credit card 4 ) LED -Left LED: indicates availability of CDMA communication - Right LED: indicates the terminal’s operational status 5 ) LCD: displays desired information 6 ) Speaker: external speaker enabling audio without an earphone 7 ) Button - 17 buttons on the front (Keyboard) - Power button (when depressed and held, the front light turns ON/OFF) - One button on the left side -Three buttons on the right side 8 ) I/O receptacle: connector used for charging or for USB communication(via ActiveSync) 1-2. Hardware Specifications DescriptionDetails CPUX-scale PXA-255 MEMORY64MB Flash Memory, 64MB RAM DISPLAY65536color TFT LCD KEY19Key, 1jog dial CARD Slot S/D Card slot INTERFACEExternal : RS-232C, IrDA 1.0, USB BATTERY7.4V 1000mAh Li-ion Battery SIZE201x79.7x53mm WEIGHT350g PRINTER2inch Thermal printer BATTERY Must be use 8.4 V Lithium battery, model BIA-3002, made by Bluebird. INPUT 9.0 V 2.5 A Barcode Scanner Class 2 Laser product 1.Product Composition 1.Product Composition 1.Product Composition 8 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-1250 Series 9 ) CF socket: connector supporting CF II type 10) Stylus pen: pen used for inputting data or making selectionsusing the LCD touch screen 11) Jacks: used for the connection of an earphone set and a microphone during a call 12) IrDA: port enabling wireless ultra-red communication between terminals 13) Battery: detachable 7.4V 1000mAH lithium-ion battery * FCC Compliance Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (…

Text truncated - open the document above for the full version.

55 44 33 22 11 D D C C B B A A Feburary 23, 2004 SiP Wireless LAN 802.11b - Only ModuleDesigned with AGERE RUBY2 RF Chipset& THESEUS2 Baseband Chipset& HERMES2 MAC Chipset PAGE FUNCTIONAL DESCRIPTION---------------------------------------------------------------------0 Blockdiagram1 Host Interface & Power Supply2 Hermes II3 Theseus II4 Base Band RF Converter5 RF Power Amplifier & RF input/output DATA/ADDRESS RF_TX OSCILLATOR, 22MHz EEPROM Q BASEBAND RF CONVERTER SWITCH MACHERMES 2 RF_TX POWERDETECT RF_RX ATTENUATOR OP AMP BUFFER DATA/ADDRESS 2.8Vdc RUBY_NV DATA 2.85Vdc, 3.3Vdc 3.3Vdc B-to-B CONNECTOR Interface BASE BAND THESEUS_NV REGULATOR RF connectorfor WiFi I 3.3Vdc3.3Vdc POWER DETECT RFPOWERAMPLIFIERSE2522L (W.FL HIROSE) ST01-11-030056 30 H2SIP - Block diagramDesign Engineer : Lucy Chung, Chia-Hong Chan A4 19 TitleSize Document Number Rev Date: Sheet of

ONETECH Corp. http://www.onetech.co.kr 505 SK APT Factory, 223-28 Sangdaewon 1-Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do 462-121, Korea [ Tel ] 82-31-746-8500, [ Fax ] 82-31-746-8700 ONETECH December 30, 2004 FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner Reviewing Engineer Re: Request for confidentiality per Section 0.459 of FCC Rules Applicant: Bluebird Soft Inc. FCC ID: SS4BIP12X0 To whom it may concern, Request is hereby submitted, on behalf of my client, Bluebird Soft Inc., to withhold from public review certain portions of the application for equipment certification for the referenced FCC identifier. In particular, the following sections of the application and report are requested to be kept confidential: Schematics Rationale for request for confidentiality: Bluebird Soft Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the confidential portions of this application to competitors would give them competitive advantage in developing similar products. If you have questions or need further information, please contact the undersigned. Sincerely, Y.K. Kwon / Director Onetech Corp. Email: [email protected]

Helen Zhao To: Y. G. Gwon Subject: RE: Bluebird Soft Inc., FCC ID: SS4BIP12X0, Assessment NO.: AN05T4453, Notice#1 1/17/2005 From: Y. G. Gwon Sent: Sunday, January 16, 2005 10:24 PM To: Helen Zhao Subject: Re: Bluebird Soft Inc., FCC ID: SS4BIP12X0, Assessment NO.: AN05T4453, Notice#1 Hi Helen, Thank you for your comment and I would like to answer your questions as following. Q3: As you can see in the setup photo, the PDA communicated with Access Point (AP). We tried so many times for matching low/middle/high channel between PDA and AP and then spurious radiated emission was performed after matching channel. It is not easy matching channel and the test result of conducted RF parameter with PDA or with Laptop shall be same. Q5: Thank s for your comment. Attached please find revised a test report. Best Regards, Y.G. Gwon ONETECH Testing & Eval. Lab. From: Helen Zhao To: Y. G. Gwon Sent: Saturday, January 15, 2005 7:17 AM Subject: RE: Bluebird Soft Inc., FCC ID: SS4BIP12X0, Assessment NO.: AN05T4453, Notice#1 Dear Mr. Gwon, Regarding Q3: OK, you can test antenna port RF conducted testing inside the PC. Please modify section 5.3 of the test report to clearly indicate that " the RF Paramneters have to be tested with software for controlling channel number, modulated and unmodulated RF signal so on, but the software cannot install into this PDA because of operating system. So the RF Parameters were tested with Laptop computer and the spurious and radiated emissions were tested with PDA." But I am just curious. If the test program could not work with PDA OS, how could you change the channel number when you did radiated spurious emission test with the WLAN module inside the PDA, since the report does show low, middle and high channel radiated emission test data? If you can change the channel in radiated emission test, why couldn't you do the same thing in RF conducted testing? Regarding Q5: Please see attached file for details. Please read Section 1 - Definition carefully, you will find MPE is only for mobile device (with more than 20cm separation distance), and SAR is for portable device (within 20cm separation distance). Your device is a portable device, but hand-held, so not subject to SAR evaluation. Best Regards, Helen -----Original Message----- From: Y. G. Gwon Sent: Friday, January 14, 2005 3:04 AM To: Helen Zhao Subject: Re: Bluebird Soft Inc., FCC ID: SS4BIP12X0, Assessment NO.: AN05T4453, Notice#1 Hi Helen, Thank you for quick response and kind comments. Regarding Q3, it is not possible for testing of RF parameter without PC, because the RF module should be operated with window OS, but the PDA is operated MS Activesync OS only. So we have to test RF parameter with PC using a test jig. And we inserted RF Module into the PDA and then tested spurious radiated emission and conducted emission. I do not know how to clear your comment. Please inform me how to clear your comment. Regarding Q5, enclosed please find a revised manual. I searched WLAN device on the FCC web site and I found almost product mentioned MPE in the test report. If you want to delete MPE calculation in our test report, I will do that, but I really want to know what kind of device shall be mentioned MPE in the test report. Do you have any information? Please send that to me. Have a great weekend! Best Regards, Y.G. Gwon ONETECH Testing & Eval. Lab. > Subject: Bluebird Soft Inc., FCC ID: SS4BIP12X0, Assessment NO.: > AN05T4453, Notice#1 > > > Question #1: The user manual indicated that the device can be connected to a PC, please note the digital portion requires DoC or FCC certification. If it is under DoC scheme, please provide DoC letter, and add FCC DoC logo on the FCC ID label format; if it needs certification, a composite device filing is necessary. You may need to file one more application under Equipment Class of JBP under the same FCC ID. > ==> This device is an industrial PDA. So the device is a Calss A Equipment and application procedure is subjetc to verification. > Question #2: Page 7 of the test report indicated that output power is 15dBm, but the test results show the highest power output is 18.4 dBm. Please revise the test report. > ==> Enclose please revised test report, but RF Output specification of this device is 15dBm. So I mentioned RF power 15dBm. > Question #3: Section 5.3 Mode of operation during the test indicated that "during the test WLAN was actually installed in the PC". Please note the EUT is the PDA with WLAN module. Without WLAN module, this PDA is just a digital device. You were testing the WLAN module, not the PDA with WLAN module, which is not acceptable. Please explain. > ==> As you know, the RF Paramneters have to be tested with software for controlling channel number, modulated and unmodulated RF signal so on, but the software cannot install into this PDA because of operating system. So the RF Parameters were tested with Laptop computer and the spurious and radiated emissions were tested with PDA. Do you think I have to revise section 5.3 in our test report? > Question #4: This device is hand-held device, please explain why you did not test in three-orthogonal planes. > ==> Enclosed please find a revised test report. > Question #5: This device is a portable device, not a mobile device, MPE calculation is not applicable, please remove MPE calculation from the test report. > ==> I know mobile and portabel device have to be met the requirement of RF Exposure. In this case we have to calculate MPE. Do you think I have to delete MPE calculation? If I have to delete this section, please send me more detail material which kind of equipment have to calculate MPE. > Question #6: Please correct the typo on page 11 of the test report. The due date has already passed. > ==> Enclosed please find a revised test report. > Question #7: There are several pages, e.g. page 12, 16, etc, showing 821.11b, please revise. > ==> Enclosed please find a revised test report. > Best Regards, > Helen Zhao > 1/17/200…

Text truncated - open the document above for the full version.

FCC ID. : SS4BIP12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab.

FCC ID. : SS4BIP12X0 Report No.: E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. IDENTIFICATION LABEL: PROPOSED FCC ID LABEL Due to the product size, only the FCC ID shall be permanently affixed to the rear side of the equipment and other information shall be placed in the instruction manual. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : SS4BIP12X0 FCC ID AREA

FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-12X0 Report No. : E04DR-018 It should not reproduced except in full, without the written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121,…

Text truncated - open the document above for the full version.

Operational description The WM-B-AG-02 wireless module allows devices running the Microsoft ® Pocket PC operating system to connect to a Wi-Fi IEEE 802.11b WLAN or communicate directly with other devices connected to a WLAN. This product is a 802.11b 11 Mbps wireless network adapter that provides CF+ host interface with 22* 29 *3.5 mm mechanical design. The WM-B-AG-02 is designed to meet the mobility, performance, security, interoperability, management, and reliability requirements of the IEEE 802.11b high data rate standard . The Wireless LAN SIP module provides PDA or handheld PC users highly mobility from cell-to-cell roaming. With a CF-to PCMAIA adapter, users can easily implement this WLAN device under most \Windows platforms. The product contains one antenna connector that provides RF connection which support cost effective antenna solution. In addition to WEP, WPA and TKIP are supported to provide the security on your network.

Page 1 of 38 FCC ID. : SS4BIP12X0 File No. : E04DR-018 It should not be reproduced except in full, without the written approval of ONETECH. EMC-007(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-Kun, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab. ELECTROMAGNETIC EMISSION C OMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test report file number : E04DR-018 Applicant : IBluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul, Korea Manufacturer : Bluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul Korea Type of Equipment : Industrial PDA FCC ID. : SS4BIP12X0 Model Name : BIP-1250 Serial number : None Total page of Report : 38 pages (including this page) Date of Incoming : December 6, 2004 Date of issue : December 20, 2004 SUMMARY The equipment complies with the regulation; FCC Part 15 Subpart C Section 15.247. This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Prepared by: Reviewed by: G. W. Lee/ Chief Engineer Y. K. Kwon/ Director EMC & Telecom Div. EMC & Telecom Div. ONETECH Corp. ONETECH Corp. Page 2 of 38 FCC ID. : SS4BIP12X0 File No. : E04DR-018 It should not be reproduced except in full, without the written approval of ONETECH. EMC-007(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-Kun, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab. CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE............................................................................................. 5 2. TEST SUMMARY.............................................................................................................................. 6 2.1 TEST ITEMS AND RESULTS................................................................................................................................................... 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS................................................................................................ 6 2.3 RELATED SUBMITTAL(S) / GRANT(S)................................................................................................................................. 6 2.4 PURPOSE OF THE TEST........................................................................................................................................................ 6 2.5 TEST METHODOLOGY......................................................................................................................................................... 6 2.6 TEST FACILITY.................................................................................................................................................................... 6 3. GENERAL INFORMATION............................................................................................................ 7 3.1 PRODUCT DESCRIPTION...................................................................................................................................................... 7 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT...................................................................... 7 4. EUT MODIFICATIONS ................................................................................................................... 7 5. SYSTEM TEST CONFIGURATION............................................................................................... 8 5.1 JUSTIFICATION.................................................................................................................................................................... 8 5.2 PERIPHERAL EQUIPMENT.................................................................................................................................................... 8 5.3 MODE OF OPERATION DURING THE TEST........................................................................................................................... 8 5.4 CONFIGURATION OF TEST SYSTEM.................................................................................................................................... 9 5.5 ANTENNA REQUIREMENT................................................................................................................................................... 9 6. PRELIMINARY TEST.................................................................................................................... 10 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS..............................................................…

Text truncated - open the document above for the full version.