SS4BIP13X0Industrial PDA

BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 1 > BIP-1300 Series User Manual (for Windows Mobile) BluebirdSoft Inc. 558-5, Shinsa-Dong, Kangnam-Gu, Seoul, Korea A/S Center: 1588-1380 Website : www.mypidion.com - Please read “Warning and Caution” before use. Bluebird Soft Inc. BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 2 > WARNING AND CAUTION • Use only the approved accessories and components provided by Bluebird Soft Inc. to insure user safety. • Never reconstruct, disassemble, or repair the product arbitrarily. Always contact a service center authorized by Bluebird Soft Inc. • If PDA or battery is wet, please do not attempt to dry it by heater or microwave. Failure to do so may cause explosion, deformation, or malfunction. (Wet PDA or battery changes the label color. Malfunction with colored label can not be serviced under warranty service. • Please avoid the use of device in explosives area. • Please do not use the device in restricted area such as in flight and hospital Operation wh ile driving is also dangerous. • Do not use the PDA in high humidity and temperature. High temperature and humidity may cause PDA malfunction an d shorten battery life. • Avoid the shock and vibration. Unplug the power cord if the device in not in use and keep it in the safe place. • Do not operate the PDA phone near any credit card, phone card, account book, ticket in order to avoid magnetic interference. It may cause damage to data in the PDA phone. • Please avoid contact of metal objects such as necklace and coins with battery connection. • Please use the authorized ba ttery and adapter only. Do not use them for other purposes. Unauthorized battery and adapter use may shorten the de vice life or cause explosion. • Please avoid barcode laser contact with eyes. • PDA phone data must be stored separately so that they are kept safe while the PDA being repaired or upgraded. BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 3 > I. Get to Know BIP-1300 1. Terminal and Accessories 2. Component Names 3. Buttons 4. Function Keys 5. Attach/Detach Battery 6. Charge Battery 7. Battery 8. Specifications II. Get familiar with the basic functions 1. Power On/Off 2. Stylus Pen 3. Get Started 4. Phone Calls (Send/Receive) 5. Character Input 6. SD memory card 7. Initialize with Soft Reset 8. Format Memory with Hard Reset III. Functions 1. Barcode Scanner 2. IrDA 3. Bluetooth 4. Wireless LAN IV . ActiveSync 1. Install ActiveSync 2. Download Files V. APPENDIX 1. Frequently Asked Questions 2. Website and Authorized Service Station 3. Miscellaneous CONTENTS BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 4 > I. Get to know BIP-1300 1. Terminal and Accessories Thank you for purchasing PIDION. Please check if all components are included. ※ Picture or Image on the manual could be different from actual model. Please contact the regional mana ger for accessories or addition al components. (Belt clip is not provided) [Terminal] [Cradle] [Battery] [Stylus Pen] [USB Cable] [Power Cable] [AC Adapter] [Stylus Tether] BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 5 > 2. Component Names Please see below for each component . [Front] Printer Printing Outlet Magnetic Card Reader CDMA light Charge light LCD Key Pad Data Synch or Charging connection Cradle connection [Bottom] BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 6 > [Right] Speaker Printing paper door Ear Jack IC Card Reader Barcode or Camera button Reset SD Slot IrDA [Left] Printing paper check Window USB Host Barcode button BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 7 > [Back] Barcode Scanner Camera, Flash Hand Strap Battery door [Back] BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 8 > 3. Buttons Phone Activate phone program and connect phone. Clear Delete the character fro m right side to left. Alpha Change the character mode to num eral, upper case, lower case or symbols. Hang up Turn on/off the PDA power. Terminate the program in use. Power Button Turn on/off the PDA power. LCD Back Light on/off could be carried out when push the button longer than 3 second. Move the menu up or left side. Direction Key Move the menu down or right side. Function Key Execute an event while holding fu nction key and other numeric k ey. Front Buttons Enter key Input symbol or letter and execute. Side Button Barcode or Camera Button Depending on user setting, right or left side button can be use d for barcode scanner or camera. BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 9 > 4. Function Keys + Opens “Start Program.” (Same as the “Start” on the Window of PC .) + Starts the Key Board Input Method. + Starts the Symbol Input Method. + Gradually lights up the LCD. + Starts Refresh Functio n. (Same as F5 of PC.) + Gradually dim the LCD. + Page Down. + Changes to an Active Program . (Same as “Alt+Tab” of PC.) + Page Up. + Starts the Stylus Pen Adjustment Program. + Scroll Up. + Scroll Down. Combination of Function Keys and Number/Symbol Keys + The LCD Screen rotates in 4 Steps. It changes sequentially depe nding on the number of pressing the buttons. BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 10 > 5. Attach and Detach Battery [Batter Attached] ▪ Push the lower part of battery after adjusting the battery to the battery slot ▪ Place the battery door from upside. [Battery Detached] ▪ Detach the battery door wit h pushing the above button ▪ Detach the battery with lifting the battery upside ※ Power must be turned off before removing the battery. Sudden electricity cut may cause the trouble. Sudden power off may be a cause of failure and may lose data. BIP-1300 Co pyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 11 > 6. Charge the battery [Charge with the cradle] ▪ As shown in the left, connect the adapter to the right side o f the cradle on the back. ▪ When you insert PDA…

Text truncated - open the document above for the full version.

#505 SK Apt. Factory, 223-28 Sangdaewon1-Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do 462-705 Korea [TEL]+82-31-746-8500 [FAX]+82-31-746-8700 January 2, 2007 FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner Reviewing Engineer Re: Request for confidentiality per Section 0.459 of FCC Rules Applicant: Bluebird Soft Inc. FCC ID: SS4BIP13X0 To whom it may it concern, Request is hereby submitted, on behalf of my client, Bluebird Soft Inc., to withhold from public review certain portions of the application for equipment certification for the referenced FCC identifier. In particular, the following sections of the application and report are requested to be kept confidential: Schematics Tune-Up Information Part List Block diagram Operational Description Rationale for request for confidentiality: Bluebird Soft Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the confidential portions of this application to competitors would give them competitive advantage in developing similar products. If you have questions or need further information, please contact the undersigned. Sincerely, Y.K. Kwon / Director Onetech Corp. Email: [email protected]

FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name.

FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. IDENTIFICATION LABEL: PROPOSED FCC ID LABEL Due to the product size, only the FCC ID shall be permanently affixed to the rear side of the equipment and other information shall be placed in the instruction manual. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. FCC ID : SS4BIP13X0 FCC ID AREA FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name.

FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name.

Bluetooth Antenna CDMA Antenna Port WLAN Antenna Port CDMA Antenna WLAN Antenna Bluetooth Antenna

Ͳ΁΁ͽ ͅʹͲͿ΅͑ͿͲ;Ͷ͑͗͑Ͳ͵͵΃Ͷ ́ ́͑ͫ ͵Ͳ΅Ͳ͑͗͑ͽ΀ʹͲ΅ ͅ΀Ϳ͑΀ͷ͑΅Ͷ ́΅ ͅͿ͸ ͳΝΦΖΓΚΣΕ ́ΠΗΥ͑ ͅΟΔ ͵ΒΥΖΤ͑ΠΗ͑ΥΖΤΥΚΟΘ͑ͫ͑ ΅ΖΤΥ͑ ́ΚΥΖ͑ͫ͑Ͷ ́΅Ͷʹ͹͑ʹΠ͑͟͝ͽΥΕ͑͟ ΅ΖΤΥ͑͵ΖΧΚΔΖ͑ͫ͑ ΅ΖΤΥ͑ΣΖΡΠΣΥ͑ΟΠ͑ͫͿΦΞΓΖΣ͑ΠΗ͑ΡΒΘΖ͑ͫ ʹΠΟΥΒΔΥ͑ΡΖΣΤΠΟ͑ͫ΃ΖΤΡΠΟΤΚΓΝΖ͑ΥΖΤΥ͑ͶΟΘΚΟΖΖΣ͑ͫ ͲΡΡΝΚΔΒΟΥ͑΅ΪΡΖ͑ͫ ͷʹʹ͑ʹͽͲ ́ ́ ͅͷ ͅʹͲ΅ ͅ΀Ϳ͑ͫ ͷʹʹ͑΃ΦΝΖ͑΁ΒΣΥ͙Τ͚ ΅ΖΤΥ͑ΣΖΤΦΝΥΤ͑ͫ͑ ͵ΒΥΖ͑ΒΟΕ͑ ́ΚΘΟΒΥΦΣΖΤ͑ͫ͑ ͪ͑ͲΡΣΚΝͣͨ͑͡͡ ΃ΖΡΠΣΥ͑΁ΣΖΡΒΣΖΕ͑ͳΪ͑ͫ͑ ͶΟΘΚΟΖΖΣ͑͠ ͟ͅͼ͟͹ΠΟΘ ͙ ́ΚΘΟΒΥΦΣΖ͚ ͶΟΘΚΟΖΖΣΚΟΘ͑;ΒΟΒΘΖΣ͑͠ͻΒΪ͑ͼΚΞ ͙ ́ΚΘΟΒΥΦΣΖ͚ {Œš›G™Œ—–™›G•–GaGlz{zhyW^W[TWWX ͷʹʹ͑ ͅ͵͑ͫ͑ ́ ́ͥͳ ͅ΁ͤ͢Ή͑͑͑͡ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑͑͢ΠΗ͑ͣͤ ͑͑΅ΙΖ͑΅ΖΤΥΖΕ͑ΕΖΧΚΔΖ͑ΔΠΞΡΝΚΖΤ͑ΨΚΥΙ͑ΥΙΖ͑ΣΖ΢ΦΚΣΖΞΖΟΥΤ͑ΚΟ͑ΣΖΤΡΖΔΥ͑ΠΗ͑ΒΝΝ ΡΒΣΒΞΖΥΖΣΤ͑ΤΦΓΛΖΔΥ͑ΥΠ͑ΥΙΖ͑ΥΖΤΥ͑͟΅ΙΖ͑ΥΖΤΥ͑ΣΖΤΦΝΥΤ͑ΒΟΕ͑ΤΥΒΥΖΞΖΟΥΤ͑ΣΖΝΒΥΖ͑ΠΟΝΪ ΥΠ͑ΥΙΖ͑ΚΥΖΞΤ͑ΥΖΤΥΖΕ͑͟΅ΙΖ͑ΥΖΤΥ͑ΣΖΡΠΣΥ͑ΤΙΒΝΝ͑ΟΠΥ͑ΓΖ͑ΣΖΡΣΠΕΦΔΖΕ͑ΣΖΔΖΡΥ͑ΚΟ͑ΗΦΝΝ͝ ΨΚΥΙΠΦΥ͑ΨΣΚΥΥΖΟ͑ΒΡΡΣΠΧΒΝ͑ΠΗ͑ΥΙΖ͑ΝΒΓΠΣΒΥΠΣΪ͟ ͅͶͶͶ͙͑ͦͣͩ͢͵ΖΔ͚ͣͤ͟͡͡ ΃ΖΔΠΞΞΖΟΕΖΕ͑΁ΣΒΔΥΚΔΖ͑ΗΠΣ͑͵ΖΥΖΣΞΚΟΚΟΘ͑ΥΙΖ͑΁ΖΒΜ͑ ́ΡΒΥΚΒΝ͞ͲΧΖΣΒΘΖ͑ ́ΡΖΔΚΗΚΔ ͲΓΤΠΣΡΥΚΠΟ͑΃ΒΥΖ͙ ́Ͳ΃͚͑ΚΟ͑ΥΙΖ͑͹ΦΞΒΟ͑ͳΠΕΪ͑͵ΦΖ͑ΥΠ͑ΈΚΣΖΝΖΤΤ͑ʹΠΞΞΦΟΚΔΒΥΚΠΟΤ ͵ΖΧΚΔΖ͑ͫ͑ͶΩΡΖΣΚΞΖΟΥΒΝ͑΅ΖΔΙΟΚ΢ΦΖΤ ηͣͪͤͬ͑͟͢͡ͷʹʹ͠΀Ͷ΅͑ͳΦΝΝΖΥΚΟ͑ͧͦ͑ ́ΦΡΡΝΖΞΖΟΥ͑ʹ͙͑ͻΦΝΪ͚͑ͣ͢͡͡ ʹΖΣΥΚΗΚΔΒΥΚΠΟ ͽΚΔΖΟΤΖΕ͑ͿΠΟ͞ͳΣΠΒΕΔΒΤΥ͑ ́ΥΒΥΚΠΟ͑΅ΣΒΟΤΞΚΥΥΖΣ͙͑΅Ϳͳ͚ ΅ΖΤΥΚΟΘ͑ΙΒΤ͑ΓΖΖΟ ʹΒΣΣΚΖΕ͑ΠΦΥ͑ΚΟ ͲΔΔΠΣΕΒΟΔΖ͑ΨΚΥΙ͑ͫ ́Ͳ΃͑ʹΠΞΡΝΚΒΔΖ͑΅ΖΤΥ͑΃ΖΡΠΣΥ Ͷ ́΅ ́Ͳ΃ͨͥͣͤ͢͡͡͞͡͡ ͚ͤͦͩͪͦͦͩͦ͑͢͞͡͞͝ ́ΚΟΤΒ͞͵ΠΟΘ͝ ͸ΒΟΘΟΒΞ͞͸Φ͑͝ ́ΖΠΦΝ͑͝ͼΠΣΖΒ ;ΠΕΖΝΤ͑ͫ͑ͳ ͅ΁ͤ͢͞͡͡ ͷʹʹ͑ ͅ͵͑ͫ͑ ́ ́ͥͳ ͅ΁ͤ͢Ή͡ ΅Ί΁Ͷ͑ͫ͑ ͅΟΕΦΤΥΣΚΒΝ͑΁͵Ͳ͙͑͑΁ΣΠΥΠΥΪΡΖ͚ ͣ͑ͲΡΣΚΝ͑ͣͨ͑͑͑͡͡ί͑ͪ͑ͲΡΣΚΝ͑ͣͨ͡͡ ͟ͅͼ͟͹ΠΟΘΊΠΦΟΘ͑΅ΒΚ͑ͻΚ͑ 1. SUMMARY FOR SAR TET REPORT --------------------------------------------------------------------- ͤ 1.1 Body Worn Configuration ---------------------------------------------------------------------------------- ͤ 1.2 Measurement Uncertainty --------------------------------------------------------------------------------- ͤ 2. INTRODUCTION ------------------------------------------------------------------------------------------------ ͥ 3. DESCRIPTION OF THE DEVICE UNDER TEST ------------------------------------------------------ ͦ 3.1 Antenna Description ---------------------------------------------------------------------------------------- ͦ 3.2 Device Description ------------------------------------------------------------------------------------------- ͦ 3.3 Battery Option ------------------------------------------------------------------------------------------------ ͦ 4. TEST CONDITIONS -------------------------------------------------------------------------------------------- ͧ 4.1 Ambient Conditions ----------------------------------------------------------------------------------------- ͧ 4.2 RF Characteristics of The Test Site --------------------------------------------------------------------- ͧ 4.3 Test Signal, Frequencies, And Output Power --------------------------------------------------------- ͧ 5. DESCRIPTION OF THE TEST EQUIPMENT ------------------------------------------------------------ ͨ 5.1 Test System Specifications ------------------------------------------------------------------------------- ͨ 5.2 SAR Measurement Setup --------------------------------------------------------------------------------- ͨ 5.3 DASY 4 E-Field Probe System --------------------------------------------------------------------------- ͩ 5.4 Phantom & Equivalent Tissues --------------------------------------------------------------------------- ͢͡ 6. DESCRIPTION OF THE TEST PROCEDURE ---------------------------------------------------------- ͣ͢ 6.1 Definition of Reference Point ----------------------------------------------------------------------------- ͣ͢ 6.2 Test Configuration Positions ------------------------------------------------------------------------------ ͤ͢ 6.3 Scan Procedures --------------------------------------------------------------------------------------------- ͧ͢ 6.4 SAR Averaging Methods ----------------------------------------------------------------------------------- ͧ͢ 7. MEASUREMENT UNCERTAINTY ------------------------------------------------------------------------- ͨ͢ 8. SYSTEM VERIFICATION ------------------------------------------------------------------------------------- ͩ͢ 8.1 Tissue Verification ------------------------------------------------------------------------------------------- ͩ͢ 8.2 Test System Validation ------------------------------------------------------------------------------------- ͩ͢ 9. RESULTS --------------------------------------------------------------------------------------------------------- ͪ͢ 10. REFERENCES ------------------------------------------------------------------------------------------------- ͣͦ APPENDIX A : Validation Test Data of Tissue APPENDIX B : Validation Test Data APPENDIX C : SAR Test Data APPENDIX D : Calibration Certificates ͑ {Œš›G™Œ—–™›G•–GaGlz{zhyW^W[TWWX ͷʹʹ͑ ͅ͵͑ͫ͑ ́ ́ ͥͳ ͅ΁ͤ͢Ή͑͑͑͡ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑ͣ͑ΠΗ͑ͣͤ ΅ΒΓΝΖ͑ΠΗ͑ʹΠΟΥΖΟΥΤ ͑͢͟͢ͳΠΕΪ͑ΈΠΣΟ͑ʹΠΟΗΚΘΦΣΒΥΚΠΟ͑ ͑͑͑;ΒΩ͑͟ ́Ͳ΃͑;ΖΒΤΦΣΖΞΖΟΥ ;͹Ϋ ʹΙΕͳΞ ͳΒΥΥΖΣΪ ͩͤͦͩͪ͟ ͤͧͤ ͢ΉͶΧ͵΀ ͣͥͧ͟͢ ́ΥΒΟΕΒΣΕ ͦ͢͟ΔΞ͑ΌΨ͠Π ͹ΠΝΤΥΖΣΎ͑΃ΖΒΣ ͦͩ͟͢͡ ͩͩ͢͟͡͡ ͧ͡͡ ͢ΩͶΧ͵΀ ͣͥͩͣ͟ ́ΥΒΟΕΒΣΕ ͦ͢͟ΔΞ͑ΌΨ͠Π ͹ΠΝΤΥΖΣΎ͑΃ΖΒΣ ͧͪͦ͟͡ ͣ͑͢͟;ΖΒΤΦΣΖΞΖΟΥ͑ΆΟΔΖΣΥΒΚΟΥΪ {Œš›G™Œ—–™›G•–GaGlz{zhyW^W[TWWX ͷʹʹ͑ ͅ͵͑ͫ͑ ́ ́ͥͳ ͅ΁ͤ͢Ή͑͑͑͡ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟Δ Π͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑ͤ͑ΠΗ͑ͣͤ ρ͙͑ͣͣ͑͟͡͡Μ͖ͮͣ͑ͪͦ͑͝ʹ΀Ϳͷ ͅ͵ͶͿʹͶ͑ͽͶ·Ͷͽ͚ ʹΠΞΓΚΟΖ͑ ́ΥΒΟΕΒΣΕ͑ΆΟΔΖΣΥΒΚΟΥΪ ͶΩΥΖΟΕΖΕ͑ ́ΥΒΟΕΒΣΕ͑ΆΟΔΖΣΥΒΚΟΥΪ ρ͙͑͑͢͢͟͡͡Μ͚ͮ͢ ́Ͳ΃ ͙Έ͠ΜΘ͚ ͷ΃Ͷ΂ΆͶͿʹΊ ;ΠΕΦΝΒΥΚΠΟ ʹΠΟΕΦΔΥΖΕ͑΁ΠΨΖΣ͙ΕͳΞ͚ ́ΖΡΒΣΒΥΚΠΟ͑ΥΖΤΥ ΡΠΤΚΥΚΠΟ ͑΃Ω͑ͷΣΖ΢ΦΖΟΔΪ ͑;ΒΩ͑͟΃ͷ͑΀ΦΥΡΦΥ͑΁ΠΨΖΣ ͩͧͪͨ͑͟͡ί͑ͩͪͤͤ͑͟͢;͹Ϋ͙ʹ͵;Ͳ͚ͩͦ͑ͪͤͣͦ͑͢͢͟͡͝ί͙͑ͪͩͩͨͦ͢͟ʹ͵;Ͳ͚ͪ͢͡͡ ͑͸ ́;͙ͩͦ͑ͣͥͧ͑͟͢͡ΕͳΞ͚͑͑͑͑͑͑΁ʹ ͙́ͪ͑ͣͥͩͣ͑͢͟͡͡ΕͳΞ͚ ͑ͶΆ΅͑΅ΪΡΖ ͑΅Ω͑ͷΣΖ΢ΦΖΟΔΪ ͅΟΕΦΤΥΣΚΒΝ͑΁͵Ͳ͙͑͑΁ΣΠΥΠΥΪΡΖ͚͑ ͩͣͥͨ͑͟͡ί͑ͩͥͩͤ͑͟͢;͹Ϋ͙ʹ͵;Ͳ͚ͩͦ͑ͩͦͣͦ͑͢͢͟͡͝ί͙͑ͪͩͨͦ͢͟͡ʹ͵;Ͳ͚ͪ͢͡͡ ͑͢͟ ́Ά;;Ͳ΃Ί͑ͷ΀΃͑΅Ͷ ́΅͑΃Ͷ΁΀΃΅ ͑͵ΒΥΖ͑ΠΗ͑ΥΖΤΥ ͑ͷʹʹ͑ ͅ͵ ͑;ΖΒΤΦΣΖΞΖΟΥ͑ΡΖΣΗΠΣΞΖΕ͑ΓΪ ͣ͑ͲΡΣΚΝ͑ͣͨ͑͑͑͡͡ί͑ͪ͑ͲΡΣΚΝ͑ͣͨ͡͡ ́ ́ͥͳ ͅ΁ͤ͢Ή͑͑͑͡ ͻΒΪ͑ͼΚΞ͑΃ΖΤΡΠΟΤΚΓΝΖ͑ΥΖΤΥ͑ΖΟΘΚΟΖΖΣ ͟ͅͼ͟͹ΠΟΘ SAR Definition ͷΚΘΦΣΖ͑ͣ͑͟͢ ́Ͳ΃͑;ΒΥΙΖΞΒΥΚΔΒΝ͑Ͷ΢ΦΒΥΚΠΟ ́Ͳ΃͑ΚΤ͑ΖΩΡΣΖΤΤΖΕ͑ΚΟ͑ΦΟΚΥΤ͑ΠΗ͑ΈΒΥΥΤ͑ΡΖΣ͑ͼΚΝΠΘΣΒΞ͙͑Έ͠ΜΘ͚͟ ́Ͳ΃͑ͮ͑՗͑Ͷς͑͑͠Օ ΈΙΖΣΖͫ ͑͑͑͑͑͑͑͑͑͑͑͑͑՗͑ͮ͑ΔΠΟΕΦΔΥΚΧΚΥΪ͑ΠΗ͑ΥΙΖ͑ΥΚΤΤΦΖ͞ΤΚΞΦΝΒΟΥ͑ΞΒΥΖΣΚΒΝ͙͑ ́͠Ξ͚ ͑͑͑͑͑͑͑͑͑͑͑͑͑Ͷ͑ͮ͑ΞΒΤΤ͑ΕΖΟΤΚΥΪ͑ΠΗ͑ΥΙΖ͑ΥΚΤΤΦΖ͞ΤΚΞΦΝΒΟΥ͑ΞΒΥΖΣΚΒΝ͙͑ΜΘ͠…

Text truncated - open the document above for the full version.

FCC ID. : SS4BIP13X0 Page 1 of 69 Report No. : E06DR-0113 It should not be reproduced except in full, without the written approval of ONETECH. EMC-003(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-705, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 307-51 Daessangryung-Ri, Chowol-Eup, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR PCS LICENSED TRANSMITTER Test Report No. : E06DR-0113 AGR No. : A069A-113R Applicant : Bluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul Korea Manufacturer : Bluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul Korea Type of Equipment : Industrial PDA FCC ID. : SS4BIP13X0 Model Name : BIP-1300 Serial number : None Total page of Report : 69 pages (including this page) Date of Incoming : September 19, 2006 Date of issuing : December 28, 2006 SUMMARY The equipment complies with the regulation; FCC Part 22 Subpart H and Part 24 Subpart E. This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Prepared by: Reviewed by: Y. M. Choi / Chief Engineer Y. K. Kwon/ Director EMC & RF Div. EMC & RF Div. ONETECH Corp. ONETECH Corp. FCC ID. : SS4BIP13X0 Page 2 of 69 Report No. : E06DR-0113 It should not be reproduced except in full, without the written approval of ONETECH. EMC-003(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-705, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 307-51 Daessangryung-Ri, Chowol-Eup, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................ 5 2. TEST SUMMARY ............................................................................................................................. 6 2.1 TEST ITEMS AND RESULTS..............................................................................................................................................6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS...........................................................................................6 2.3 RELATED SUBMITTAL(S) / GRANT(S).............................................................................................................................6 2.4 PURPOSE OF THE TEST....................................................................................................................................................6 2.5 TEST METHODOLOGY....................................................................................................................................................6 2.6 TEST FACILITY...............................................................................................................................................................6 3. GENERAL INFORMATION ........................................................................................................... 6 3.1 PRODUCT DESCRIPTION.................................................................................................................................................6 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT..................................................................6 4. EUT MODIFICATIONS ................................................................................................................... 6 5. SYSTEM TEST CONFIGURATION .............................................................................................. 6 5.1 JUSTIFICATION...............................................................................................................................................................6 5.2 PERIPHERAL EQUIPMENT...............................................................................................................................................6 5.4 MODE OF OPERATION DURING THE TEST.......................................................................................................................6 5.5 MODULATION CHARACTERISTICS.................................................................................................................................6 5.6 OUTPUT POWER VERIFICATION AND JUSTIFICATION FOR FINAL MEASUREMENT.....................................................6 6. RF POWER OUTPUT AT ANTENNA TERMINAL .................................................................... 6 6.1 OPERATING ENVIRONMENT...........................................................................................................................................6 6.2 TEST SET-UP...................................................................................................................................................................6 6.3 TEST EQUIPMENT USED..................................................................................................................................................6 6.4 TEST DATA......................................................................................................................................................................6 6.5 DATA PHOTO FOR CDMA IS-2000................................................................................................................................6 6.6 DATA PHOTO FOR CDMA 1X EVDO............................................................................................................................6 7. OCCUPIED BANDWIDTH TEST................................................................................................... 6 7.1 OPERATING ENVIRONMENT...................................................................................…

Text truncated - open the document above for the full version.

FCC ID. : SS4BIP13X0 Page 1 of 69 Report No. : E06DR-0113 It should not be reproduced except in full, without the written approval of ONETECH. EMC-003(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-705, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 307-51 Daessangryung-Ri, Chowol-Eup, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR PCS LICENSED TRANSMITTER Test Report No. : E06DR-0113 AGR No. : A069A-113R Applicant : Bluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul Korea Manufacturer : Bluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul Korea Type of Equipment : Industrial PDA FCC ID. : SS4BIP13X0 Model Name : BIP-1300 Serial number : None Total page of Report : 69 pages (including this page) Date of Incoming : September 19, 2006 Date of issuing : December 28, 2006 SUMMARY The equipment complies with the regulation; FCC Part 22 Subpart H and Part 24 Subpart E. This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Prepared by: Reviewed by: Y. M. Choi / Chief Engineer Y. K. Kwon/ Director EMC & RF Div. EMC & RF Div. ONETECH Corp. ONETECH Corp. FCC ID. : SS4BIP13X0 Page 2 of 69 Report No. : E06DR-0113 It should not be reproduced except in full, without the written approval of ONETECH. EMC-003(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-705, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 307-51 Daessangryung-Ri, Chowol-Eup, Kwangju-City, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................ 3 2. TEST SUMMARY ............................................................................................................................. 3 2.1 TEST ITEMS AND RESULTS..............................................................................................................................................3 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS...........................................................................................3 2.3 RELATED SUBMITTAL(S) / GRANT(S).............................................................................................................................3 2.4 PURPOSE OF THE TEST....................................................................................................................................................3 2.5 TEST METHODOLOGY....................................................................................................................................................3 2.6 TEST FACILITY...............................................................................................................................................................3 3. GENERAL INFORMATION ........................................................................................................... 3 3.1 PRODUCT DESCRIPTION.................................................................................................................................................3 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT..................................................................3 4. EUT MODIFICATIONS ................................................................................................................... 3 5. SYSTEM TEST CONFIGURATION .............................................................................................. 3 5.1 JUSTIFICATION...............................................................................................................................................................3 5.2 PERIPHERAL EQUIPMENT...............................................................................................................................................3 5.4 MODE OF OPERATION DURING THE TEST.......................................................................................................................3 5.5 MODULATION CHARACTERISTICS.................................................................................................................................3 5.6 OUTPUT POWER VERIFICATION AND JUSTIFICATION FOR FINAL MEASUREMENT.....................................................3 6. RF POWER OUTPUT AT ANTENNA TERMINAL .................................................................... 3 6.1 OPERATING ENVIRONMENT...........................................................................................................................................3 6.2 TEST SET-UP...................................................................................................................................................................3 6.3 TEST EQUIPMENT USED..................................................................................................................................................3 6.4 TEST DATA......................................................................................................................................................................3 6.5 DATA PHOTO FOR CDMA IS-2000................................................................................................................................3 6.6 DATA PHOTO FOR CDMA 1X EVDO............................................................................................................................3 7. OCCUPIED BANDWIDTH TEST................................................................................................... 3 7.1 OPERATING ENVIRONMENT...................................................................................…

Text truncated - open the document above for the full version.

FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name. FCC ID. : Error! Unknown document property name. Report No.: Error! Unknown document property name.