SS4BIP30X0Industrial PDA W/ WLAN

-Before getting started, ensure that you read and follow the -Before getting started, ensure that you read and follow the “Safety Warnings and Precautions”section of this manual. Safety Warnings and Precautions Safety Warnings and Precautions ! Warning •Exercise precautions when using the battery. - Always completely charge the battery after purchasing the product. - If the batteries are damaged, severely shocked, heated, exposedto moisture or high temperatures, or bored by a gimlet, they may explode. - Do not use inferior quality batteries or battery chargers as doing so may cause explosion. ! Precautions •Learn how to properly use the antenna. - For terminals with an antenna, hold the terminal like a normal telephone, and place the antenna straight over your shoulder. •Never touch power outlets with wet hands or mobile phones. - This may cause electric shock. •Never insert or place the terminal, battery, or charger into or near heating devices, such as heaters or electronic ovens. - This may cause product transformation, explosion, or fire. •Never reconstruct, disassemble, or repair the product arbitrarily. - Always contact a service center authorized by Bluebird Soft. - Ensure that you adhere to the Safety Warnings and Precautions. If these principles are not adhered to, free repair service will not be offered. •Use only accessories and batteries provided or authorized by Bluebird Soft. - Not adhering to this advice may cause battery explosion, or defect in the terminal. ! Warning •Exercise precautions when using the battery. - Always completely charge the battery after purchasing the product. - If the batteries are damaged, severely shocked, heated, exposedto moisture or high temperatures, or bored by a gimlet, they may explode. - Do not use inferior quality batteries or battery chargers as doing so may cause explosion. ! Precautions •Learn how to properly use the antenna. - For terminals with an antenna, hold the terminal like a normal telephone, and place the antenna straight over your shoulder. •Never touch power outlets with wet hands or mobile phones. - This may cause electric shock. •Never insert or place the terminal, battery, or charger into or near heating devices, such as heaters or electronic ovens. - This may cause product transformation, explosion, or fire. •Never reconstruct, disassemble, or repair the product arbitrarily. - Always contact a service center authorized by Bluebird Soft. - Ensure that you adhere to the Safety Warnings and Precautions. If these principles are not adhered to, free repair service will not be offered. •Use only accessories and batteries provided or authorized by Bluebird Soft. - Not adhering to this advice may cause battery explosion, or defect in the terminal. Table of Contents Table of Contents 1. Product Composition 2. Getting Started 3. Precautions 4. Using Barcode 5. Using Wireless LAN Features 6. Connecting BIP-3010 to Desktop 1. Product Composition 2. Getting Started 3. Precautions 4. Using Barcode 5. Using Wireless LAN Features 6. Connecting BIP-3010 to Desktop 4 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-3010 Series 1.Product Composition 1.Product Composition 1.Product Composition 1. Product Composition 2. Getting Started 3. Precautions 4. Using Barcodes 5. Using Wireless LAN Features 6. Connecting BIP-3010 to Desktop 5 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-3010 Series 1-1. Inspecting Components Before using the product, inspect the contents of your package box for all the components shown below: 1.Product Composition 1.Product Composition 1.Product Composition [ACCESSORY BOX] [One Main body of BIP-3010] [One Stylus Pen] [One Battery for BIP-3010] [Warranty] [One Cradle for BIP-3010] [Power Cable(AC Adapter)] [PDA BOX] 6 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-3010 Series 1-2. Hardware Specifications Acquaint yourself with the basic parts and names of the terminal using the following figures: 1.Product Composition 1.Product Composition 1.Product Composition 7 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-3010 Series 1-2. Hardware Specifications 1 ) Antenna: device for receiving radio waves 2 ) Barcode Scanner: device for reading barcodes 3 ) LED -Left LED: indicates availability of CDMA communication - Right LED: indicates the terminal’s operational status 4 ) LCD: window which displays desired information 5 ) Speaker: external speaker enabling audio without an earphone 6 ) Button - 22 buttons on the front (Keyboard) - Power button(when depressed and held, the front light turns ON/OFF) - Button to change directions to top, bottom, left and right -Text function button - One button on the left side -Two buttons on the right side 7 ) I/O receptacle: connector used for charging or for USB communication(via ActiveSync) DescriptionDetails CPUX-scale PXA-255 MEMORY64MB Flash Memory, 64MB RAM DISPLAY65536color TFT LCD KEY25key CF CARD SLOTCF II type Slot INTERFACEExternal : RS-232C,IrDA 1.1, USB BATTERY4.2V 2000mAH Li-ion Battery SIZE183.5x84.5x39.1mm WEIGHT413g BATTERYMust be use 3.7 V Lithium battery, model BIA-3002, made by Bluebird. INPUT5.0 V 2.5 A ADAPTORadd a core on the adapter line BARCODE SCANNERClass 2 Laser product 1.Product Composition 1.Product Composition 1.Product Composition 8 Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved. BIP-3010 Series 8 ) CF socket: connector supporting CF II type 9 ) Stylus pen: pen used for inputting data or making selectionsusing the LCD touch screen 10) Jack - Right Jack : used for the connection of an earphone set and a microphone during a call - Left Jack : used for adapter during battery charging 11) IrDA: port enabling wireless ultra-red communication between terminals 12) Battery: detachable 7.4V 1000mAH lithium-ion battery * FCC Compliance Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,…

Text truncated - open the document above for the full version.

55 44 33 22 11 D D C C B B A A Feburary 23, 2004 SiP Wireless LAN 802.11b - Only ModuleDesigned with AGERE RUBY2 RF Chipset& THESEUS2 Baseband Chipset& HERMES2 MAC Chipset PAGE FUNCTIONAL DESCRIPTION---------------------------------------------------------------------0 Blockdiagram1 Host Interface & Power Supply2 Hermes II3 Theseus II4 Base Band RF Converter5 RF Power Amplifier & RF input/output DATA/ADDRESS RF_TX OSCILLATOR, 22MHz EEPROM Q BASEBAND RF CONVERTER SWITCH MACHERMES 2 RF_TX POWERDETECT RF_RX ATTENUATOR OP AMP BUFFER DATA/ADDRESS 2.8Vdc RUBY_NV DATA 2.85Vdc, 3.3Vdc 3.3Vdc B-to-B CONNECTOR Interface BASE BAND THESEUS_NV REGULATOR RF connectorfor WiFi I 3.3Vdc3.3Vdc POWER DETECT RFPOWERAMPLIFIERSE2522L (W.FL HIROSE) ST01-11-030056 30 H2SIP - Block diagramDesign Engineer : Lucy Chung, Chia-Hong Chan A4 19 TitleSize Document Number Rev Date: Sheet of

ONETECH Corp. http://www.onetech.co.kr 505 SK APT Factory, 223-28 Sangdaewon 1-Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do 462-121, Korea [ Tel ] 82-31-746-8500, [ Fax ] 82-31-746-8700 ONETECH December 14, 2004 FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner Reviewing Engineer Re: Request for confidentiality per Section 0.459 of FCC Rules Applicant: Bluebird Soft Inc. FCC ID: SS4BIP30X0 To whom it may concern, Request is hereby submitted, on behalf of my client, Bluebird Soft Inc., to withhold from public review certain portions of the application for equipment certification for the referenced FCC identifier. In particular, the following sections of the application and report are requested to be kept confidential: Schematics Rationale for request for confidentiality: Bluebird Soft Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the confidential portions of this application to competitors would give them competitive advantage in developing similar products. If you have questions or need further information, please contact the undersigned. Sincerely, Y.K. Kwon / Director Onetech Corp. Email: [email protected]

1 Mike Kuo From: Y. G. Gwon [[email protected]] Sent: December302004Thursday 4:27 PM To: Mike Kuo Subject: Fw: Bluebird Soft Inc., FCC ID: SS4BIP30X0, Assessment NO.: AN04T4428, Notice#1 CONFIDENTIAL LETTER.doc BIP-3010_Manual_ Rev01.pdf ----- Original Message ----- From: "Y. G. Gwon" <[email protected]> To: "Mike Kuo" <[email protected]> Sent: Friday, December 24, 2004 12:02 PM Subject: Re: Bluebird Soft Inc., FCC ID: SS4BIP30X0, Assessment NO.: AN04T4428, Notice#1 > Hi Mike, > > Thank you for your kind comments. > > I would like to answer your questions at the bottom of your original text, but I have some questions. > Q#1: The EUT use WLAN Module or CDMA Module. If the device use CDMA Module, how to change the manual regarding Important Note? > Q#2: According to your kind comments, #6, can I understand the standard number have to changed with ANSI C 63.4/2003? > After getting revised manual form our client and your kind advice, I would like to clear all your comments. > > Wish you have a Merry Christmas! > > Best Regards, > Y.G. Gwon > ONETECH Testing & Eval. Lab. > TEL: +82-31-765-8289 > FAX: +82-31-766-2904 > email: [email protected] > > > ----- Original Message ----- > From: "Mike Kuo" <[email protected]> > To: "Y. K. Kwon (E-mail)" <[email protected]> > Sent: Friday, December 24, 2004 6:45 AM > Subject: FW: Bluebird Soft Inc., FCC ID: SS4BIP30X0, Assessment NO.: AN04T4428, Notice#1 > > >> >> >> -----Original Message----- >> From: Compliance Certification Services [mailto:[email protected]] >> Sent: Thursday, December 23, 2004 1:19 PM >> To: Mike Kuo >> Subject: Bluebird Soft Inc., FCC ID: SS4BIP30X0, Assessment NO.: AN04T4428, Notice#1 >> >> >> Question #1: Operational description is requested as confidential document but the information contains in the file are general information which can not be considered as confidential information to the applicant. Please remove operational description from the request letter. >> ==> Enclosed please find a revised confidential letter. >> Question #2: Based upon the external photos and internal photos, the antenna is built in the PDA . However, section 1-2 hardware specification shows external integral antenna which does not agree with external and internal photos. Please explain. >> ==>Yes, You are correct. The external antenna on the section 1-2 in the manual is for inserting CDMA Module in the EUT. > That means the EUT use WLAN or CDMA Module, but this EUT is only for WLAN Module. If the WLAN is inserted into the EUT, the antenna port shall be closed with plastic cap, but the manual will be use for WLAN and CDMA module. In this case, what can they do? >> Question #3: Section 1-2 of user manual indicates CF slot, please explain the function of this CF slot and the typical device will be used. 2 >>==> The CF Slot for the EUT is for external barcode scanner, or Memory Card. But when the WLAN module was inserted into the EUT, the CF Slot can not be use for above device, because the space for the memory card or external device in the device is replaced with WLAN Module. >> Question #4: This device is equipped with earphone, speaker and microphone functions. Please explain how these functions will be used. >> ==> The above mentioned port is for CDMA Module. If the CDMA Module is inserted into the EUT, we will re-submit this project to you. In this case, the above mentioned port does not work. >> Question #5: Please consider to change the RF exposure warning statement to the following : >> >> Important Note: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. This PDA is designed to be used for hand-held operation only. >> > ==> O. K. But if the EUT use CDMA Module, in this case how to change the manual. I think you mentioned important note is for only >> Question #6: ANSI C63.4:2001 measurement procedure is out dated. Please make necessary changes. >> ==> That means we have to describe ANSI C63.4/2003 in our tets report. >> FYI : Based upon the reply to the question #4, SAR evaluation may be required. >> >> Best Regards >> >> Mike Kuo >> >> >> The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

FCC ID. : SS4BIP30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab.

FCC ID.: SS4BIP30X0 File No.: E04DR-017 ONETECH Testing & Evaluation Lab. IDENTIFICATION LABEL: PROPOSED FCC ID LABEL Due to the product size, only the FCC ID shall be permanently affixed to the rear side of the equipment and other information shall be placed in the instruction manual. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : SS4BIP30X0 FCC ID AREA

FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : SS4BIP-30X0 File No. : E04DR-017 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31…

Text truncated - open the document above for the full version.

Operational description The WM-B-AG-02 wireless module allows devices running the Microsoft ® Pocket PC operating system to connect to a Wi-Fi IEEE 802.11b WLAN or communicate directly with other devices connected to a WLAN. This product is a 802.11b 11 Mbps wireless network adapter that provides CF+ host interface with 22* 29 *3.5 mm mechanical design. The WM-B-AG-02 is designed to meet the mobility, performance, security, interoperability, management, and reliability requirements of the IEEE 802.11b high data rate standard . The Wireless LAN SIP module provides PDA or handheld PC users highly mobility from cell-to-cell roaming. With a CF-to PCMAIA adapter, users can easily implement this WLAN device under most \Windows platforms. The product contains one antenna connector that provides RF connection which support cost effective antenna solution. In addition to WEP, WPA and TKIP are supported to provide the security on your network.

Page 1 of 39 FCC ID. : SS4BIP30X0 Report No. : E04DR-017 It should not be reproduced except in full, without the written approval of ONETECH. EMC-007(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-Kun, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab. ELECTROMAGNETIC EMISSION C OMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : E04DR-017 Applicant : IBluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul, Korea Manufacturer : Bluebird Soft Inc. Address : 558-5, Sinsa-dong, Gangnam-gu, Seoul Korea Type of Equipment : Industrial PDA FCC ID. : SS4BIP30X0 Model Name : BIP-3010 Serial number : None Total page of Report : 39 pages (including this page) Date of Incoming : December 6, 2004 Date of issue : December 13, 2004 SUMMARY The equipment complies with the regulation; FCC Part 15 Subpart C Section 15.247. This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Prepared by: Reviewed by: G. W. Lee/ Chief Engineer Y. K. Kwon/ Director EMC & Telecom Div. EMC & Telecom Div. ONETECH Corp. ONETECH Corp. Page 2 of 39 FCC ID. : SS4BIP30X0 Report No. : E04DR-017 It should not be reproduced except in full, without the written approval of ONETECH. EMC-007(Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: 82-31-746-8500 FAX: 82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-Kun, Kyunggi-Do 464-860 Korea. (TEL: 82-31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab. CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE .............................................................................................5 2. TEST SUMMARY ..............................................................................................................................6 2.1 TEST ITEMS AND RESULTS..............................................................................................................................................6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS...........................................................................................6 2.3 RELATED SUBMITTAL(S) / GRANT(S)............................................................................................................................6 2.4 PURPOSE OF THE TEST...................................................................................................................................................6 2.5 TEST METHODOLOGY....................................................................................................................................................6 2.6 TEST FACILITY...............................................................................................................................................................6 3. GENERAL INFORMATION ............................................................................................................7 3.1 PRODUCT DESCRIPTION.................................................................................................................................................7 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT.................................................................7 4. EUT MODIFICATIONS ....................................................................................................................7 5. SYSTEM TEST CONFIGURATION ...............................................................................................8 5.1 JUSTIFICATION...............................................................................................................................................................8 5.3 PERIPHERAL EQUIPMENT...............................................................................................................................................8 5.4 MODE OF OPERATION DURING THE TEST.......................................................................................................................8 5.5 CONFIGURATION OF TEST SYSTEM...............................................................................................................................9 5.6 ANTENNA REQUIREMENT..............................................................................................................................................9 6. PRELIMINARY TEST ....................................................................................................................10 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS.......................................................................................................10 6.2 GENERAL RADIATED EMISSIONS TESTS......................................................................................................................10 7. MIMIMUM 6DB BANDWIDTH ....................................................................................................11 7.1 OPERATING ENVIRONMENT.........................................................................................................................................11 7.2 TEST SET-UP.................................................................................................................................................................11 7.3 TEST EQUIPMENT USED................................................................................................................................................11 7.4 TEST DATA....................................................................................................................................................................12 7.…

Text truncated - open the document above for the full version.

FCC ID.: SS4BIP30X0 File No.: E04DR-017 ONETECH Testing & Evaluation Lab. FCC ID.: SS4BIP30X0 File No.: E04DR-017 ONETECH Testing & Evaluation Lab. FCC ID.: SS4BIP30X0 File No.: E04DR-017 ONETECH Testing & Evaluation Lab. FCC ID.: SS4BIP30X0 File No.: E04DR-017 ONETECH Testing & Evaluation Lab.