SS4BIP5XX0PDA

- Before starting, ensure that you read and follow the “ Safety Warnings and Precautions ” section of this manual. Safety Warnings and Precautions Safety Warnings and Precautions : Please follow the instructions to properly use the product an d avoid accidents in advance. 1. Exercise precautions when using the battery- If the batteries are damaged, s everely shocked, heated, expose d to moisture or hig h temperatures, or bored by a gimlet, it may explode. - Keep batteries away from children and pets.2. Do not use PDA phone in explosion areas . 3. Do not use PDA phone on an aircraft or inside a hospital . 4. Avoid using PDA phone or checking phone numbers while driving. Use hands free kit in unavoidable conditions or use it after stopping the car 5. Product may deform or malfunc tion if exposed to direct sunli ght 6. Prevent conductive objects such as necklaces and coins from making contact with the battery plug. Do not shock battery with sharp objects or animals. Battery may explod e. 7. Only use recommended batteries and do not use with other pro ducts. Do not use inferi or quality battery as doing so may shorten battery and PDA life span and cause explos ion. (Warranty is void in this event) 8. Battery must be charged with the adapter or standard charger provided. Usage of unapproved adapter may shorten battery life or cause explosion. (Warranty is void in t his event) 9. If the PDA gets wet, never insert or place the terminal, bat tery, or charger into or n ear heating devices, such as heaters or microwave ovens . This may cause production defor mation, explosion or fire. (The label ’ s color inside the PDA or battery will fade if immersed in water.) Plea se note that free repair service won ’ t be provided in this condition.) Contents Contents I. Safety and precautions – Warning and cautions II. Contents 1. Product composition2. Get to know the product 1) Left, front, right side of product2) Button introduction3) Specifications 3. Getting started 1) Connecting and disc onnecting the battery 2) Charging battery3) Using PDA 4. Start connecting network 1) Scan2) ear jack (Converter)3) Reset PDA4) Host PC connecting5) IrDA 사용 Using IrDA6) Bluetooth 7) How to Use Wireless Manager 8) Using memory card 5. ActiveSync 1) Installing ActiveSync2) Precaution for using ActiveSync 6. Using PDA phone functions 7. Using Wireless LAN features8. Precautions9. Appendix 1) Q&A2) Accessories Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 2 > BIP-5000 Product Composition Product Composition The following illustrations may differ from actual products. Pl ease contact our customer center to purchase additional or optional products. [BIP-5000 PDA 1 unit] [BIP-5000 Cradle 1 unit] [B attery (standard)] [Stylus] [Power cable] [Adapter] [ USB cable] [User manual] Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 3 > BIP-5000 Knowing the product Knowing the product 1. Front, left side, back, right side [Front] [Right side] [Back] [Left side] Antenna GSM(LED) Speaker Power(LED) Alpha key Power buttonCall button Barcode scannerwindow Barcode/CameraButton ear jack IrDA Camera Reset Battery CaseFixed screw HandStrap Barcode/CameraButton Flash Enter key Function key Microphone Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 4 > BIP-5000 Knowing the product Knowing the product 2. Button introduction Press 3 seconds to lock the PDA. Password must be inserted to u se the PDA. Press 3 seconds to enable/disable silent modeMove one space to the right.Delete a character by moving the cursor one space to the left.Execute program and make phone connection. Press once to execut e phone program, press twice to view recent calls , press three ti mes to call the selected number. Change character input mode. Default mode is numeric. Press onc e for lower case English, press twice for capital English, press three times for special characters. Execute after user inputLaser(1D,2D) Barcode / Camera Type : Press left button to use b arcode scanner Press right button to use camera CMOS Barcode Type : Use right and left button to activate barco de. Use it to turn on/turn off the PDA Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 5 > BIP-5000 Knowing the product Knowing the product 3. Specifications 5V 2.4A ADAPTER 314 g WEIGHT 79.5(width) x 150.3(length) x 34.9thickness) mm SIZE 2000mAH BATTERY 2.0M pixel camera CAMERA 1 x USB 1.1 Client / Host1 x RS-232CMini-SD slotIrDA 1.2 (Option: Bluetooth class ) INTERFACE 3.5 ” , 240 x 320 / 260,000 color DISPLAY Window Mobile 5.0 OS Intel PXA270 520MHz CPU Description Contents Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 6 > BIP-5000 Knowing the product Knowing the product 3. Specification FCC Compliance StatementFCC NOTICE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditio ns: (1) This devices may not cause ha rmful interference, and (2) This device must accept any interference received, includin g interference that may ca use undesired operation. This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to part15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interference in a residential inst allation. This equipment generate, uses and can radiate radio frequency ene rgy and, if not installe d and used in accordance with the instructions, may cause harmful interference to radio communications. Howeve r, there is no guarantee that interference will not occur in a pa rticular installation. If this equipment does cause harmful interference to radio or televisi on reception, which ca n be determined by turn ing the equipment off and on, the user is encouraged to try to correct t he interference by one or more of the following measures:• Reorient or relocate the receiving antenna. • Increase the separation betwee n the equipment and receiver. • Connect the equipment into an outlet on a circui…

Text truncated - open the document above for the full version.

Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 8 > BIP-5000 3. Specification Knowing the product Knowing the product FCC RF EXPOSURE INFORMATION WARNING! Read this informat ion before using your phone In August 1996 the Federal Communic ations Commission (FCC) of the Unit ed States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagne tic energy emitted by F CC regulated transmitters. Those guidelines are consistent with the safety standard previously se t by both U.S. and international standards bodies. The desig n of this phone complies with the FC C guidelines and these international standards.CAYTION : Use only the supplied or an approved ant enna. Unauthorized antenna s, modifications, or attachments could impair ca ll quality, damage the phon e, or result in violat ion of FCC regulations. Do not use the phone with a damag ed antenna. If a damaged antenna co mes into contact with the skin, a minor burn may result. Plea se contact your local deal er for replacement antenna. Body-worn OperationThe SAR limit of USA (FCC) is 1.6 W/kg averaged over on e gram of tissue. BIP-5000 Device (FCC ID: SS4BIP5XX0) has also been tested against this SAR limit. The highes t SAR value reported under this standard during product certification for use at the ear is 0.573 W/kg and when properly worn on the body is 0.956 W/kg.

BluebirdSoft Inc. 558-5, Sinsa-dong, Kangnam-gu, Seoul, Korea TEL : 082-2-548-0740 / FAX : 82-31-548-0870 http://www.bluebird.co.kr/ Date: Jan. 8, 2007 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize SGS Testing Korea Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS Testing Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). In authorizing SGS Testing Korea Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Park Chan-Woong / Manager

BluebirdSoft Inc. 558-5, Sinsa-dong, Kangnam-gu, Seoul, Korea TEL : 082-2-548-0740 / FAX : 82-31-548-0870 http://www.bluebird.co.kr/ Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material. We, BluebirdSoft Inc., would like the following documents regarding this submission for FCC ID: SS4BIP5XX0 to be kept confidential. 1. Schematics 2. Parts List 3. Block Diagram 4. Theory of operation The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Park Chan-Woong / Manager

Helen Zhao Sent: Thursday, January 18, 2007 6:47 PM Subject: FW: FCC New submission, AN07T6432, PDA, FCC ID : SS4BIP5XX0 (Bluebord Soft Inc.) 1/23/2007 Dear Helen, Please see our answers. AN07T6432-GSM: 1) EMC reprt(GSM) is incomplete, there are no occupied bandwidth, bandedge and frequency stability test data. Please provide additional test data [Erwin] The GSM modules in this product are certified module. (FCC ID: O9EQ2687 / Name of Grantee: Wavecom SA). So, we tested the rest items except for occupied bandwidth, bandedge and frequency stability test. The test report and technical documents of this module was uploaded by Wavecom SA. Please check. 2) EMC report(GSM) does not show that EDGE mode was ever tested. Please refer to the reference reports to perform the test and submit additional test data. [Erwin] We revised EMC report (GSM-RSE) including EDGE mode, and uploaded it. 3) Please provide tune-up procedure. Please list max. conducted power output in Tune-up procedure, or you can list in the test report. I need to compare with the power level in the SAR report. Note: the power level used for SAR test can not be lower than that stated in the tune-up procedure. [Erwin] The tune-up procedure was uploaded. 4) Please provide GPRS multi-slot class and GPRS terminal class. Note: if terminal class is A, then it is expected that SAR evaluation for multi-slot GPRS at head position is needed. [Erwin] GPRS multi-slot is 10. And terminal class is B. 5) EMC test report indicates middle channel test was done at 836.4MHz, while SAR report indicates the middle channel test was done at 836.6MHz, please explain why the discrepancy exists. [Erwin] EMC test report is revised to add test data at 836.6MHz. AN07T6441-WLAN 6) Please explain whether WLAN radio and Bluetooth radio can be transmitting simultaneously. If so, please explain why WLAN + BT mode was not tested for SAR. [Erwin] The SAR test report was revised, and updated test report was uploaded. AN07T6442-BT 7) Please provide block Diagram and Operational description of the bluetooth module. [Erwin] This equipment used Bluetooth chipset. So, we uploaded block diagram and operational description of Bluetooth chipset. Best Regards, Erwin 1/23/2007

FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 43 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Appendix B. Photos of the EUT Front View of EUT Rear View of EUT FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 44 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Right View of EUT Left View of EUT

FCC ID LABEL 1. FCC ID label location - Rear side of set 2. FCC ID label drawing BluebirdSoft Inc. FCC ID : SS4BIP5XX0 Model : BIP-5000 S/N : Made in Korea This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This devices may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 45 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Inner of EUT Top View of Main-board FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 46 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Bottom View of Main-board Top View of Keyboard FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 47 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Bottom View of Keyboard Top View of Camera FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 48 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Bottom View of Camera Top View of LCD FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 49 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Bottom View of LCD Top View of LED FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 50 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Bottom View of LED Top View of GSM FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 51 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Bottom View of GSM View of Antenna(WLAN) FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 52 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com View of Antenna(BT) View of Antenna(GSM)

FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 1 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com TEST REPORT OF FCC Part 15 Subpart B&C §15.247 FCC ID: SS4BIP5XX0 Equipment Under Test :PDA Model Name :BIP-5000 Serial No. :N/A Applicant :BluebirdSoft., Inc. Manufacturer :BluebirdSoft., Inc. Date of Test(s) :2006-12-26 ~ 2007-01-05 Date of Issue :2007-01-08 In the configuration tested, the EUT complied with the standards specified above. Te s t e d B y : Date 2007-01-08 Feel Jeong Approved By Date 2007-01-08 Albert Lim FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 2 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com INDEX TABLE OF CONTENTS Page 1. General Information ----------------------------------------------------------------------- 3 2. Conducted Power Line Test -------------------------------------------------------------- 6 3. Spurious Emission, Band Edge and Restricted Band Test ------------------------- 11 4. 20dB Bandwidth ---------------------------------------------------------------------------- 20 5. Maximum Peak Output Power ---------------------------------------------------------- 23 6. Hopping Channel Separation ------------------------------------------------------------ 26 7. Number of Hopping Frequency --------------------------------------------------------- 28 8. Time of Occupancy(Dwell Time) -------------------------------------------------------- 30 9. Power Spectral Density -------------------------------------------------------------------- 37 10. Antenna Requirement -------------------------------------------------------------------- 40 Appendix A-1. Photo of Spurious Emission Test Appendix A -2. Photos of Conducted Power Line Test Appendix B. Photos of the EUT FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 3 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com 1. General Information 1.1. Testing Laboratory SGS Testing Korea Co., Ltd. Wireless Div. 2FL, 18-34, Sanbon-dong, Gunpo-Si, Gyeonggi-do, Korea 435-040 www.electrolab.kr.sgs.com Telephone : +82 +31 428 5700 FAX : +82 +31 427 2371 1.2. Details of Applicant Applicant : BluebirdSoft., Inc Address : 558-5, Sinsa-dong, Kangnam-gu, Seoul, Korea Contact Person : Chan Eung Park Phone No. : +82 +2 548 0740 Fax No. : +82 +2 548 0870 1.3. Description of EUT Kind of Product PDA Model Name BIP-5000 Serial Number N/A Power Supply DC 3.7 V(Li-Polymer Battery) Frequency Range 2412 MHz ~ 2462 MHz(11b/g), 2402 MHz ~ 2480 MHz(Bluetooth) 824.2 MHz ~ 848.8 MHz(GSM 850), 1850.2 MHz ~ 1909.8 MHz(GSM 1900) Modulation Technique DSSS(11b), OFDM(11g), FHSS(Bluetooth), GMSK, 8-PSK Number of Channels 11 CH(11b/g), 79 CH(Bluetooth), 300(GSM 1900), 125(GSM 850) Operating Conditions -20 °C ~ 55 °C Antenna Type Fixed Type(11b/g, Bluetooth) FPCB Type(GSM) Antenna Gain -0.98 dBi(WLAN, Bluetooth) 1.4. Details of modification -N/A FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 4 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com 1.5. Test Equipment List EQUIPMENT MANUFACTURER MODEL CAL DUE. Signal Generator Agilent E4438C May 2007 Spectrum Analyzer Agilent E4440A May 2007 Spectrum Analyzer H.P 8593E Sep. 2007 Power Meter Agilent E4416A May 2007 Power Sensor Agilent E9327A May 2007 DC Power Supply Agilent 6674A May 2007 DC Power Supply Agilent E3631A May 2007 Attenuator Agilent 8494B May 2007 Two-Line V-Network NNB 41 Schaffner Sep. 2007 Test Receiver Rohde & Schwarz ESVS10 May 2007 Test Receiver Rohde & Schwarz ESHS10 Aug. 2007 Ultra-Broadband Antenna Rohde & Schwarz HL562 Sep. 2007 Horn Antenna Electro-Metrics RGA-60 Dec. 2007 Anechoic Chamber SY Corporation L xWxH 9.6x6.4x6.4 Aug. 2007 FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 5 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD:FCC Part15, Subpart B & Subpart C Standard Section Test Item Result 15.107(a) 15.207 AC Power Conducted EmissionComplied 15.205(a) 15.209(a) 15.247(d) Spurious Emission, Band Edge and Restricted Bands Complied 15.247(a)(1) 20 dB Bandwidth Complied 15.247(b)(1) Maximum Peak Output Power Complied 15.247(a)(1) Frequency Separation Complied 15.247(a)(1)(iii) Number of Hopping Frequency Complied 15.247(a)(1)(iii) Time of Occupancy (Dwell Time) Complied 15.247(e) Power Spectral Density Complied FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 6 of 52 The r…

Text truncated - open the document above for the full version.

FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 41 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Appendix A-1. Photo of Field Strength & Spurious Emission Test FCC ID : SS4BIP5XX0 Report File No. : STROR-07-004 Page : 42 of 52 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Appendix A -2. Photos of Conducted Power Line Test