SS4CF550Cost-Effective Full Touch Handheld Computer

CF550 Cost-Effective 'VMM
5PVDI
)BOEIFME
$PNQVUFS QUICK GUIDE This user manual is protected by copyright. Copyright © 2021 Bluebird Inc. All rights reserved. Bluebird Inc. is the designer and manufacturer of Bluebird handheld mobiles. This manual and the programs in this device are protected under international copyright laws, and may not be copied, distributed, translated, or removed by any means. Registered T rademark BLUEBIRD is an emerging global brand, striving to lead the market in performance and mobility. Their products represent reliability, innovation, and innovative technology. Bluebird is a registered trademark from the global brand of Bluebird Inc. and is copyright protected. • Bluebird and stylized Bluebird Logo are registered trademarks and symbols of Bluebird Inc. • Qualcomm ® IZat™ is a registered trademark of Qualcomm Atheros, Inc.trademark of Qualcomm Atheros, Inc. • Adobe ® is a registered trademark of Adobe Systems Inc. • All other trademarks and copyrights are the property of their respective owners. User’s Guidance Device typeUser’s guidance Class B Device (Household Information & Communication) This device has qualified the electromagnetic wave suitable registration and can be used as a household device at a residential area as well as any other areas. Type Registration This wireless device may cause propagation interference, and so, it cannot be used for life-saving services. 1 Safety Information 1 Safety Information 1.1 Symbols This manual uses the following symbols to indicate hazards and additional information. SymbolNameDescription WarningIndicates situations that could cause injury to yourself or others. CautionIndicates situations that could cause damage to your device or other equipment. NoteIndicates additional information that can help you get the most out of the device. Please read this safety precaution information carefully. Failure to follow the information provided may result in fire, electric shock, or other property damage or bodily injuries. 1.2 Device • Do not press the Power button on the device if the device is wet or do not touch adapter or power cord with wet hands. There is risk of electric shock. • Do not use your device in an explosive danger zone. • If your device becomes wet, do not put your device in heaters, microwaves, etc. to dry it. There is a risk of explosion or malfunction. • Do not scratch the device’s touchscreen. Use only your fingers or a compatible pen. Never use an actual pen, or any other sharp object on the touchscreen. • Although this device is very sturdy, do not drop, hit, bend, or sit on it on purpose. It can be broken. • Do not modify, take apart, or repair the device. Contact to your customer service center. Failure to do so will void your warranty. • Do not attempt to modify your hardware or software. It may cause device malfunction and void your warranty. • You may not be able to use this wireless device in basements, open fields, skyscrapers, or other places where the signal is weak. • Backup the data and information from your device. Your data, such as ringtones, texts, and voice messages, may be erased during repairs or upgrades. • Do not paint your device. It can damage your screen or your device’s exterior. • Avoid using or storing this device at extreme temperatures. This device is designed to work at temperatures between -10°C and 50°C (14°F and 122°F), and humidity level between 5% and 95%. Safety Information 2 1.3 Environment •Do not use the device while driving or operating heavy machinery. Doing so may result in death or serious injury. • Do not use the device in locations with combustible goods. Doing so may result in an explosion. •Do not use the device in dusty or hot locations. Doing so may damage the device. • Do not expose your device to direct sunlight such as on the dashboard of a car for extended periods of time. • Do not use the device in humid locations. Doing so may damage the device and void the warranty. • Do not keep the device close to air conditioner vents. Corrosion within the device may occur due to condensation from changes in temperature. • Do not allow children to play with the device. 1.4 Charging • Use only the approved charger. Using an incompatible charger may cause device malfunction or other damage, such as fire. • Charge the battery at least once a year. If you keep it without charging for a long time, it may cause device malfunction. 1.5 Distraction In some situations, using your device may distract you and cause serious injuries and damages. For example, avoid talking on the phone or texting while driving or riding a bicycle. It is strictly prohibited by law in some jurisdictions. If you cannot avoid using your device while driving, stop your vehicle or use hand-free kit. 1.6 Frequency Interference •This wireless device may cause radio frequency interference, so use Airplane mode or turn off the device when prohibited. • The device emits an electromagnetic fields. It may interfere with your medical devices. • Do not place credit cards, phone cards, bankbook, and tickets next to the device. The magnetic field of the device can damage their magnetic strips. 3 2.1 Package Contents The package includes: USB cable (C-type) CF550 device Overview 2 Overview Battery The illustrations may differ from your actual items. Adapter SIM Tooling pin Overview 4 2.2 Your Device 2.2.1 Front 2.2.2 Back Light sensor Proximity sensor Touch screen Volume up button Volume down button Receiver Charging / Notification LED SIM card slot Power Button Scan button Back button Battery release latch Battery Scan button Home button Menu button Rear camera Camera flash Battery release latch Overview 5 2.2.3 Bottom and Top Headset jack Interface connector Microphone Speaker Microphone Barcode scanner 6 3.1 Installing the Cards 3.1.1 Inserting a Micro SIM card 1 Remove the card slot on the right side of your device. 2 Insert a micro SIM cards into the slots. Make sure that the gold contacts on the cards are…

Text truncated - open the document above for the full version.

E TA Techno This report sh EUT Ap EUT Appearanc ology (Shang hall not be repr ppearanc ce ghai) Co., L roduced except ce td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R211 Pa nghai) Co., Ltd. 1A0957 age 1 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R211 Pa nghai) Co., Ltd. 1A0957 age 2 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap a: EUT pproval of TA Te Re echnology (Shan eport No.: R211 Pa nghai) Co., Ltd. 1A0957 age 3 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap b: Adapter pproval of TA Te Re echnology (Shan eport No.: R211 Pa nghai) Co., Ltd. 1A0957 age 4 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without c: C Picture 1: t the written ap Charging do : Constituen pproval of TA Te ock ts of EUT Re echnology (Shan eport No.: R211 Pa nghai) Co., Ltd. 1A0957 age 5 of 5

45.6mm*27.6mm

InternalPhoto

Prepared by: Fangying Wei Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 SAR TEST REPORT Applicant Bluebird Inc. FCC ID SS4CF550 Product Cost-Effective Full Touch Handheld Computer Brand BLUEBIRD Model CF550 Report No. R2111A0957-S1 Issue Date January 7, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in IEEE 1528- 2013, ANSI C95.1: 1992, IEEE C95.1: 1991. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 2 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 4 1.1 Notes of the Test Report ......................................................................................................... 4 1.2 Test facility .............................................................................................................................. 4 1.3 Testing Location ...................................................................................................................... 4 1.4 Laboratory Environment .......................................................................................................... 5 2 Statement of Compliance ............................................................................................................... 6 3 Description of Equipment under Test .............................................................................................. 8 4 Test Specification, Methods and Procedures ............................................................................... 10 5 Operational Conditions during Test ............................................................................................... 11 5.1 Test Positions ......................................................................................................................... 11 5.1.1 Against Phantom Head ................................................................................................... 11 5.1.2 Body Worn Configuration ................................................................................................ 11 5.2 Measurement Variability ........................................................................................................ 12 5.3 Test Configuration ................................................................................................................. 13 5.3.1 GSM Test Configuration ................................................................................................. 13 5.3.2 UMTS Test Configuration ............................................................................................... 13 5.3.3 LTE Test Configuration ................................................................................................... 17 5.3.4 Additional re quirements for TDD LTE specification .................................................... 18 5.3.5 Wi-Fi Test Configuration ................................................................................................. 22 5.3.6 BT Test Configuration ..................................................................................................... 23 6 SAR Measurements System Configuration .................................................................................. 24 6.1 SAR Measurement Set-up .................................................................................................... 24 6.2 DASY5 E-field Probe System ................................................................................................ 25 6.3 SAR Measurement Procedure .............................................................................................. 26 7 Main Test Equipment .................................................................................................................... 28 8 Tissue Dielectric Parameter Measurements & System Verification .............................................. 30 8.1 Tissue Verification ................................................................................................................. 30 8.2 System Performance Check .................................................................................................. 32 8.3 SAR System Validation ......................................................................................................... 34 9 Normal and Maximum Output Power ........................................................................................... 35 9.1 GSM Mode ............................................................................................................................ 35 9.2 WCDMA Mode ...................................................................................................................... 36 9.3 LTE Mode .............................................................................................................................. 37 9.4 WLAN Mode .......................................................................................................................... 64 9.5 Bluetooth Mode ..................................................................................................................... 66 10 Measured and Reported (Scaled) SAR Results ........................................................................... 67 10.1 EUT Antenna Locations ........................................................................................................ 67 10.2 Standalone SAR test exclusion considerations ...............................................…

Text truncated - open the document above for the full version.

SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 151 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 66 802.11nHT20 U-NII-1 Back Side High (Distance 0mm) Date: 2021/12/20 Communication System: UID 0, 802.11n HT20 (0); Frequency: 5240 MHz;Duty Cycle: 1:1.04 Medium parameters used: f = 5240 MHz; σ = 4.847 S/m; ε r = 36.872; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(5.45, 5.45, 5.45); Calibrated: 2021/8/12 Electronics: DAE4 SN1317; Calibrated: 2021/2/23 Phantom: SAM 2; Type: SAM Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Back Side High/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 2.26 W/kg Back Side High/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 0.5940 V/m; Power Drift = 0.143 dB Peak SAR (extrapolated) = 4.22 W/kg SAR(1 g) = 2.253 W/kg; SAR(10 g) = 0.546 W/kg Maximum value of SAR (measured) = 3.36 W/kg SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 152 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 67 Bluetooth Left Edge High (Distance 0mm) Date: 2021/12/02 Communication System: UID 0, BT (0); Frequency: 2480 MHz;Duty Cycle: 1:1.30 Medium parameters used: f = 2480 MHz; σ = 1.878 S/m; ε r = 37.511; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(7.25, 7.25, 7.25); Calibrated: 2021/8/12 Electronics: DAE4 SN1317; Calibrated: 2021/2/23 Phantom: SAM 2; Type: SAM Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Left Edge High/Area Scan (7x15x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.390 W/kg Left Edge High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.80 V/m; Power Drift = 0.107 dB Peak SAR (extrapolated) = 0.87 W/kg SAR(1 g) = 0.172 W/kg; SAR(10 g) = 0.064 W/kg Maximum value of SAR (measured) = 0.450W/kg SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 153 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX D: Probe Calibration Certificate SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 154 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 155 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 156 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 157 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 158 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 159 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 160 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 161 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 162 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX E: D750V3 Dipole Calibration Certificate SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 163 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 164 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 165 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 166 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 167 of 232 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2111A0957-S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Pag…

Text truncated - open the document above for the full version.

Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Bluebird Inc. FCC ID SS4CF550 Product Cost-Effective Full Touch Handheld Computer Brand BLUEBIRD Model CF550 Report No. R2111A0957-R4 Issue Date January 7, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 15C (2020). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2111A0957-R4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-004R Page 2 of 69 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1 Test Laboratory ............................................................................................................................... 4 1.1 Notes of the Test Report ......................................................................................................... 4 1.2. Test facility .............................................................................................................................. 4 1.3 Testing Location ...................................................................................................................... 4 2 General Description of Equipment under Test ................................................................................ 5 2.1 Applicant and Manufacturer Information.................................................................................. 5 2.2 General information ................................................................................................................. 5 3 Applied Standards .......................................................................................................................... 6 4 Information about the FHSS characteristics ................................................................................... 7 4.1 Frequency Hopping System Requirement............................................................................... 7 4.2 Pseudorandom Frequency Hopping Sequence ....................................................................... 8 4.3 Equal Hopping Frequency Use ............................................................................................... 9 4.4 System Receiver Input Bandwidth .......................................................................................... 9 4.5 Test Configuration ................................................................................................................. 10 5 Test Case Results ......................................................................................................................... 11 5.1 Peak Power Output ................................................................................................................ 11 5.2 Occupied Bandwidth (20dB) .................................................................................................. 15 5.3 Frequency Separation ........................................................................................................... 21 5.4 Time of Occupancy (Dwell Time) ........................................................................................... 25 5.5 Band Edge Compliance ........................................................................................................ 29 5.6 Number of hopping Frequency .............................................................................................. 36 5.7 Spurious RF Conducted Emissions ....................................................................................... 38 5.8 Unwanted Emission .............................................................................................................. 45 5.9 Conducted Emission ............................................................................................................. 64 6 Main Test Instruments .................................................................................................................. 67 ANNEX A: The EUT Appearance ......................................................................................................... 68 ANNEX B: Test Setup Photos .............................................................................................................. 69 RF Test Report Report No.: R2111A0957-R4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-004R Page 3 of 69 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of Measurement Results Number Test Case Clause in FCC rules Verdict 1 Frequency Hopping System 15.247 (g), (h) PASS 2 Peak Power Output 15.247(b)(1) PASS 3 Occupied Bandwidth (20dB) 15.247(a)(1) PASS 4 Frequency Separation 15.247(a)(1) PASS 5 Time of Occupancy (Dwell Time) 15.247(a)(1)(iii) PASS 6 Band Edge Compliance 15.247(d) PASS 7 Number of Hopping Frequency 15.247(a)(1)(iii) PASS 8 Spurious RF Conducted Emissions 15.247(d) PASS 9 Unwanted Emissions 15.247(d),15.205,15.209 PASS 10 Conducted Emissions 15.207 PASS Date of Testing: November 15, 2021 ~ December 16, 2021 Date of Sample Received: November 9, 2021 Note: PASS: The EUT complies with the essential requirements in the standard. FAIL: The EUT does not comply with the essential requirements in the standard. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. RF Test Report Report No.: R2111A0957-R4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-004R Page 4 of 69 This report shall not be reproduced except in full, without the written appro…

Text truncated - open the document above for the full version.

FCC RF Test Setup Report No: R2111A0957 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 1 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX A: Part15C Test Setup A.1 Test Setup 9kHz-30MHz 30MHz-1GHz FCC RF Test Setup Report No: R2111A0957 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 2 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1GHz-18GHz 18GHz - 26.5GHz Picture 1 Radiated Emission Test Setup FCC RF Test Setup Report No: R2111A0957 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 3 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Picture 2 Conducted Emission Test Setup

TA Techno This report sh SAR Te SAR Test Rep ology (Shang hall not be repr est Setup port ghai) Co., Lt roduced except p Pict Pictu td. tin full, without ture 1: Left H ure 2: Left H TA-MB- t the written ap Hand Touch Hand Tilt 15 -04-003S pproval of TA Te Cheek Posi Degree Pos Repo echnology (Shan ition sition ort No.: R2111A Pa nghai) Co., Ltd. A0957 age 1 of 9 TA Techno This report sh SAR Test Rep ology (Shang hall not be repr port ghai) Co., Lt roduced except Pictu Pictu td. tin full, without ure 3: Right re 4: Right H TA-MB- t the written ap Hand Touch Hand Tilt 15 -04-003S pproval of TA Te h Cheek Pos Degree Pos Repo echnology (Shan sition sition ort No.: R2111A Pa nghai) Co., Ltd. A0957 age 2 of 9 TA Techno This report sh Pic Pic SAR Test Rep ology (Shang hall not be repr cture 5: Back cture 6: Fron port ghai) Co., Lt roduced except k Side, the d nt Side, the d td. tin full, without distance from distance from TA-MB- t the written ap m handset t m handset t 15 -04-003S pproval of TA Te o the bottom to the bottom 15mm 5mm Repo echnology (Shan m of the Pha m of the Pha ort No.: R2111A Pa nghai) Co., Ltd. antom is 15m antom is 15m A0957 age 3 of 9 mm mm TA Techno This report sh Pic Pic SAR Test Rep ology (Shang hall not be repr cture 7: Back cture 8: Fron port ghai) Co., Lt roduced except k Side, the d nt Side, the d td. tin full, without distance from distance from TA-MB- t the written ap m handset t m handset t -04-003S pproval of TA Te o the bottom to the bottom 10mm 10mm Repo echnology (Shan m of the Pha m of the Pha ort No.: R2111A Pa nghai) Co., Ltd. antom is 10m antom is 10m A0957 age 4 of 9 mm mm TA Techno This report sh Pic Pict SAR Test Rep ology (Shang hall not be repr cture 9: Left ure 10: Rig h port ghai) Co., Lt roduced except Edge, the d ht Edge, the td. tin full, without distance from e distance fro TA-MB- t the written ap m handset to om handset -04-003S pproval of TA Te o the bottom to the botto 10mm 10mm Repo echnology (Shan m of the Pha om of the Ph ort No.: R2111A Pa nghai) Co., Ltd. ntom is 10m hantom is 10 A0957 age 5 of 9 mm 0mm TA Techno This report sh Pic Pict u SAR Test Rep ology (Shang hall not be repr cture 11: Top ure 12: Botto port ghai) Co., Lt roduced except p Edge, the d om Edge, the td. tin full, without distance fro e distance fr TA-MB- t the written ap m handset t rom handse 10mm 10mm -04-003S pproval of TA Te to the bottom et to the botto Repo echnology (Shan m of the Pha om of the Ph ort No.: R2111A Pa nghai) Co., Ltd. antom is 10m hantom is 1 A0957 age 6 of 9 mm 0mm TA Techno This report sh Pic Pic SAR Test Rep ology (Shang hall not be repr cture 13: Ba cture 14: Fro port ghai) Co., Lt roduced except ck Side, the ont Side, the td. tin full, without e distance fro e distance fro 0m TA-MB- t the written ap om handset om handset 0mm mm -04-003S pproval of TA Te to the botto t to the botto Repo echnology (Shan om of the Ph om of the Ph ort No.: R2111A Pa nghai) Co., Ltd. hantom is 0m hantom is 0m A0957 age 7 of 9 mm mm TA Techno This report sh Pic Pic SAR Test Rep ology (Shang hall not be repr cture 15: Lef ture 16: Rig port ghai) Co., Lt roduced except ft Edge, the ht Edge, th e td. tin full, without distance fro e distance fr TA-MB- t the written ap om handset rom handset 0mm 0mm -04-003S pproval of TA Te to the botto t to the botto Repo echnology (Shan m of the Ph om of the Ph ort No.: R2111A Pa nghai) Co., Ltd. antom is 0m hantom is 0m A0957 age 8 of 9 mm mm TA Techno This report sh Pic Pict u SAR Test Rep ology (Shang hall not be repr cture 17: To ure 18: Botto port ghai) Co., Lt roduced except p Edge, the om Edge, th td. tin full, without distance fro he distance f 0m TA-MB- t the written ap om handset from handse mm 0mm -04-003S pproval of TA Te to the botto et to the bott Repo echnology (Shan m of the Ph tom of the P ort No.: R2111A Pa nghai) Co., Ltd. antom is 0m Phantom is 0 A0…

Text truncated - open the document above for the full version.