SSJSM5100BGSM/GPRS Module

SM5100B TEST BOARD User Manual SM5100B Module Test Board User Manual Version: 1.0.0 HW-SM5100B-UG-0001 2003-11-27 www.spreadtrum.com V1.00 Spreadtrum Communications, Inc., Confidential and Proprietary 1 of 36 Spreadtrum reserves the right to change or discontinue this product without notice. SM5100B TEST BOARD User Manual IMPORTANT NOTICE COPYRIGHT NOTICE Copyright © 2003, Spreadtrum Communications, Inc. All rights reserved. TRADEMARKS Spreadtrum Communications, Inc. and Spreadtrum Communications, Inc.’s products are exclusively owned by Spreadtrum Communications, Inc.. References to other companies and their products use trademarks owned by the respective companies and are for reference purpose only. WARRANTY DISCLAIMER Spreadtrum Communications, Inc. makes no representations or warranties, either express or implied, by or with respect to anything in this document, and shall not be liable for any implied warranties of merchantability or fitness for a particular purpose or for any indirect, special or consequential damages. CONFIDENTIALITY The information contained herein (including any attachments) is confidential. The recipient hereby acknowledges the confidentiality of this document, and except for the specific purpose, this document shall not be disclosed to any third party. V1.00 Spreadtrum Communications, Inc., Confidential and Proprietary 2 of 36 Spreadtrum reserves the right to change or discontinue this product without notice. SM5100B TEST BOARD User Manual Table of Contents 1 Purpose 5 2 General Introduction to SM5100B TEST BOARD..............................................................................6 2.1 Brief Introduction to SM5100B Module...............................................................................6 2.1.1 RF Functionality ........................................................................................................................ 6 2.1.2 Baseband Functionality............................................................................................................. 6 2.1.3 Memory Functionality ................................................................................................................ 6 2.2 Overview of SM5100B TEST BOARD ................................................................................6 2.3 Function Block of SM5100B TEST BOARD........................................................................8 3 Functionality Part...............................................................................................................................9 3.1 Power Management Part ....................................................................................................9 3.1.1 Relevant Function Requirements of SM5100B Module ............................................................ 9 3.1.2 Test Design in SM5100B TEST BOARD ................................................................................. 9 3.1.3 Pin Definition of Relevant Connector...................................................................................... 10 3.2 SIM Card Part ...................................................................................................................10 3.2.1 Relevant Function Requirements of SM5100B Module .......................................................... 10 3.2.2 Test Design in SM5100B TEST BOARD ............................................................................... 10 3.3 Keyboard Part...................................................................................................................11 3.3.1 Relevant Function Requirements of SM5100B Module .......................................................... 11 3.3.2 Test Design in SM5100B TEST BOARD ............................................................................... 11 3.3.3 Pin Definition of Relevant Connector...................................................................................... 11 3.4 LCD Display Part ..............................................................................................................12 3.4.1 Relevant Function Requirements of SM5100B Module .......................................................... 12 3.4.2 Test Design in SM5100B TEST BOARD ............................................................................... 12 3.4.3 Pin Definition of Relevant Connector...................................................................................... 13 3.5 Serial Port Part .................................................................................................................14 3.5.1 Relevant Function Requirements of SM5100B Module .......................................................... 14 3.5.2 Test Design in SM5100B TEST BOARD ............................................................................... 14 3.5.3 Pin Definition of Relevant Connector...................................................................................... 15 3.6 Memory Part .....................................................................................................................16 3.6.1 Relevant Function Requirements of SM5100B Module .......................................................... 16 3.6.2 Test Design in SM5100B TEST BOARD ............................................................................... 16 3.7 Audio Part .........................................................................................................................16 3.7.1 Relevant Function Requirements of SM5100B Module .......................................................... 16 3.7.2 Test Design in SM5100B TEST BOARD ............................................................................... 17 3.7.3 Pin Definition of Relevant Connector...................................................................................... 18 3.8 RF Part .............................................................................................................................19…

Text truncated - open the document above for the full version.

EXHIBIT C - EUT EXTERNAL PHOTOGRAPHS EUT – Top View EUT – Bottom View

EXHIBIT A - FCC ID LABELING AND WARNING STATEMENT Proposed FCC ID Label Specifications : Text is black or white in color and is left justified. Labels are silk-screened and shall be “permanently affixed” at a conspicuous location on the EUT. Proposed Label Location on EUT Bottom View of the EUT/Proposed ID Label Location FCC Warning Statement A FCC Warning Statement is provided in the product manual. FCC ID: SSJSM5100B

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Board and Housing View EUT - Power Board and EUT View II EUT – Power Board Top View EUT – Board Bottom View Transmitter - Top View Transmitter – Rear View Transmitter – Component View

§1.1310 & §2.1091 - RF EXPOSURE According to §2.1091 & §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure was measured. Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Test Equipment List and Details Manufacturer Description Model Serial Number Cal. Date W & G EM Radiation, Monitor EMR-20 B-0054 2005-02-24 W & G EM Radiated, Probe EMR-20-1 22449020 2005-02-24 * Statement of Traceability: BACL attests that all calibrations have been performed per the NVLAP requirements, traceable to NIST. Environmental Conditions Temperature: 20° C Relative Humidity: 58% ATM Pressure: 1018 mbar The testing was performed by Daniel Deng on 2005-04-11. Measurement Results Frequency (MHz) Measurement (mW/cm 2 ) Limit (mW/cm 2 ) Separation Distance (cm) 836.6 0.09 0.533 30 1880 0.02 1.00 30 The Power density at measured frequency at 30 cm is 0.09 mW/cm 2 within the limit of 0.533 mW/cm 2 for 800MHz frequency band & 0.02 mW/cm 2 within the limit of 1.0 mW/cm 2 for 1900MHz frequency band. Setup Photos

Note: The test report is specially limited to the above company and the product model only. It may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the US Government. FCC PART 22, 24 TYPE APPROVAL EMI MEASUREMENT AND TEST REPORT For Spreadtrum Communication Inc. 810 E. Arques Ave. Sunnyvale, California, United States 94085 FCC ID: SSJSM5100B This Report Concerns: Original Report Equipment Type: 850MHz / 1900 MHz GSM/GPRS Module Test Engineer: Ming Jin / Report No.: R0412235 Report Date: 2005-01-31 Reviewed By: Daniel Deng / Prepared By: Bay Area Compliance Laboratory Corporation (BACL) 230 Commercial Street Sunnyvale, CA 94085 Tel: (408) 732-9162 Fax: (408) 732 9164 Spreadtrum Communication Inc. FCC ID: SSJSM5100B Report # R0412235Rpt-a.doc Page 2 of 30 FCC Part 22, 24 Type Approval Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................4 TEST METHODOLOGY..................................................................................................................................................4 TEST FACILITY.............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 JUSTIFICATION.............................................................................................................................................................6 BLOCK DIAGRAM.........................................................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................6 SUPPORT EQUIPMENT LIST AND DETAILS....................................................................................................................6 EXTERNAL I/O CABLING LIST AND DETAILS...............................................................................................................6 CONFIGURATION OF TEST SYSTEM..............................................................................................................................7 TEST SETUP BLOCK DIAGRAM.....................................................................................................................................7 SUMMARY OF TEST RESULTS ...............................................................................................................................8 §2.1047 - MODULATION CHARACTERISTIC .......................................................................................................9 APPLICABLE STANDARD..............................................................................................................................................9 TEST PROCEDURE........................................................................................................................................................9 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................................9 ENVIRONMENTAL CONDITIONS....................................................................................................................................9 TEST RESULTS.............................................................................................................................................................9 §2.1053 - SPURIOUS RADIATED EMISSIONS......................................................................................................12 APPLICABLE STANDARD............................................................................................................................................12 TEST PROCEDURE......................................................................................................................................................12 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................12 ENVIRONMENTAL CONDITIONS..................................................................................................................................12 TEST RESULT.............................................................................................................................................................13 §2.1046, §22.913(A), & §24.232 – CONDUCTED OUTPUT POWER ...................................................................14 APPLICABLE STANDARD............................................................................................................................................14 TEST PROCEDURE......................................................................................................................................................14 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................14 ENVIRONMENTAL CONDITIONS...............................................................................…

Text truncated - open the document above for the full version.