ST2-2X73YTemperature Sensir Tag IT-735P

CENTRAKPROBE-BASEDTEMPERATURE SENSO RTAG RIT-735P Hospitals have a critical need for wireless monitoring of environmental fluctuations. They require reliable real time monitoring and alerting capabilities as well as comprehensive records of sensor data for reporting and analysis purposes. CenTrak’s advanced temperature sensing technology was developed to meet those needs. The IT-735 is a probe-based temperature sensing tag that has the ability to monitor a wide range of temperatures, from cryogenic (-200C) to room temperature (+50C), reliably and accurately with customizable reporting rates down to 12 seconds at 0.75C accuracy. It is available for use with three specific temperature range probes : -20C to +50C (ITA-781), -100 to -20C (ITA-782), and -200 to -100C (ITA-783) The IT¬735 Tag creates a cost effective way to improve patient care as well as provide automated and detailed reports for any time period. In conjunction with the CenTrak RTLS this single Tag can be used to track, locate, identify and ensure correct temperature levels and can generate alerts via email/SMS when the temperature goes above or below set parameters. The system can also provide temperature logs which eliminate human error and the cost of manual temperature documentation. Tags send temperature readings in intervals specified by the user (e.g., every one minute). The battery powered tags will even continue to monitor temperature and send a local alert in the event of a power outage. Tags provide an automated and accurate solution that improves regulatory compliance and saves time so that staff can focus on patient care and safety. About CenTrak Technology CenTrak’s core RTLS differs from legacy technologies in its use of a patented combination of second-generation infrared (Gen2IR™) and active RFID technology called DualTrak. Battery powered Monitors transmit a unique room number using Gen2IR which is received by any tag in that room. The tag communicates the room number and its own unique ID via RF to the CenTrak Location Server using a hospital’s existing wired or Wi-Fi network, where it can be accessed in real-time by hospital personnel and integrated with third party solution providers. Like light, Gen2IR will not pass through walls and does not suffer from traditional infrared line-of-sight limitations. Therefore, when a tag reads a room number, there are no errors. This is certainty-based RTLS. Unlike estimation-based information, certainty-based location data can be used by hospitals to make important improvements to process flow and automate decision making. Most healthcare workflow improvements can only be realized when the location data is certainty-based. Covers ranges from -200C to +50C 0.75C accuracy (0.5C typical) Customizable reporting rates – down to 12 seconds Low power consumption for long battery life(4 years with 1 minute reporting rate) NIST traceable calibration available Button for event reporting Integrates with CenTrak RTLS CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: [email protected] www.centrak.com © CenTrak 2010. All Rights Reserved • DualTrak and CenTrak is a trademark of CenTrak, Inc. • Proprietary and Confidential Information • 12/1/10 WARNING:This guide is in draft form and can be changed without notice at any time by CenTrak. Please contact CenTrak prior to commercial use to receive all the necessary latest information about the system. 902-928 MHz (Model # IT-735) 8M codes > 300 feet 2 uW (Average) 1 button, LED, low battery FCC Operating Frequency Range 868-870 MHz (Model # ITEU-735) CE Operating Frequency Range Operation Group ID codes Outdoor transmission range Field strength Smart Tag features YES Motion Sensor ITA-786 ITA-787 ITA-751 ITA-752Double sided adhesive Thermal vial holder Probe holder for air temperature measuring 3M VHB adhesive (0.64 mm) ITA-753 Screw attachment w/ adhesive pad Operating temperature (Tag) Storage temperature (Tag) +10C to +40C -25 C to +80 C Battery type Smart tag feature Low battery indication Lithium CR2450 Environmental Power Probe temperature ranges Thermal Vial -20C to +50C (ITA-781) -100 to -20C (ITA-782) -200 to -100C (ITA-783) ITA-785 Attachment Options Case length Case height Case width 1.5 in (38.48mm) 1.98 in (50.36 mm) 0.94 in (24 mm) Case weight (with battery) Construction 1.10 oz. (34.02g) DurabilityTough, impact resistant and temperature stable ABS & Poly Carbonate mixture Tag Dimensions Note: Must use CenTrak Disinfection procedure. Other methods may void product warranty. Tag cleaning method Wipe Cleaning Method Only. See CenTrak Tag Disinfection Guide for Instructions Cleaning CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: [email protected] www.centrak.com CENTRAKPROBE-BASEDTEMPERATURESENSOR TAGIT-735 TECHNICALSPECIFICATIONS This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425 , 7,061,428 , 7,378,964 © CenTrak 2010. All Rights Reserved • DualTrak and CenTrak is a trademark of CenTrak, Inc. • Proprietary and Confidential Information • 12/1/10 InTouch Care Operation Instruction Introduction InTouch Care is an Active RFID tracking system. The system is comprised of four basic elements: 1. TAGS – The TAGs are battery operated and are comprised of an RF Transceiver and a few peripheral components. The TAGs are small devices with about 1” X 2” foot print. They are typically attached to assets or people that need to be tracked. 2. Spiders – The Spiders are als…

Text truncated - open the document above for the full version.

207 Penns Trail, Newtown PA 18940 i Tel 215.860.2928 i Fax 215.359.0659 i www.centrak.com Date: March 1, 2011 FCC and IC Confidentiality Request In accordance with 0.459 & 0.457 of CFR 47, please, accept this letter as an official request to have the following kept as confidential for the reference IDs: IC:6012A-2X73Y and FCC ID:ST2-2X73Y. The information provided is for the sole purpose of inclusion as exhibits in the Application for Certificate of the FCC &IC IDs stated above: We ask to keep confidential the following Tag (model # IT-733P,IT-735P,IT-736P) documents: y Schematics y Block diagram y Operational description Sincerely, Israel Amir, CTO Remote Play, Inc. 207 Penns Trail Newtown, PA 18940 Tel 215-860-2928

207 Penns Trail, Newtown PA 18940 i Tel 215.860.2928 i Fax 215.359.0659 i www.centrak.com Date: 3/1/2011 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize Advanced Compliance Laboratory, Inc., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Advanced Compliance Laboratory, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Advanced Compliance Laboratory, Inc. as our agent, we still recognize that we are responsible to: • comply with the relevant provisions of the certification program; • make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; • make claims regarding certification only in respect of the scope for which certification has been granted; • do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; • upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; use certification only to indicate the products are certified as being in conformity with specified standards; • endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; • ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; • keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; • take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; September 16, 2010 z Page 2 • document the actions taken This authorization is valid until further written notice from the applicant. Sincerely Yours, Printed Name: Israel Amir Title: CTO Company: Remote Play, Inc.

FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 21 7.1 Front View FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 22 7.2 Back View

FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 8 2. PRODUCT LABELING Figure 2.1 FCC ID Label Figure 2.2 Location of Label on the Side of EUT Figure 2.2 FCC Label Location ( back of EUT) FCC ID: ST2-2X73Y Figure 2.1 FCC ID Label FCC Label

FCC ID: ST2-2X73Y IC:6012A-2X73Y Internal Photos for RPI Temperature Tag Inside View FCC ID: ST2-2X73Y IC:6012A-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel:(908) 927-9288 Fax: (908) 927-0728 2 PCB Component View FCC ID: ST2-2X73Y IC:6012A-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel:(908) 927-9288 Fax: (908) 927-0728 3 PCB Foil View FCC ID: ST2-2X73Y IC:6012A-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel:(908) 927-9288 Fax: (908) 927-0728 4 Temp Sensor PCB PCB Component View FCC ID: ST2-2X73Y IC:6012A-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel:(908) 927-9288 Fax: (908) 927-0728 5 Temp Sensor PCB PCB Foil View

ELECTROMAGNETIC EMISSION COMPLIANCE REPORT of TEMPERATURE TAG MODEL: IT-733P/IT-735P/IT-736P FCC ID: ST2-2X73Y February 09, 2011 This report concerns (check one): Original grant x Class II change Equipment type: Low Power Intentional Radiator Deferred grant requested per 47 CF 0.457(d)(1)(ii)? yes no x If yes, defer until: (date) Company agrees to notify the Commission by (date) of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? yes no x If no, assumed Part 15, Subpart B for unintentional radiators - the new 47 CFR [10-1-90 Edition] provision. Report prepared for: REMOTE PLAY, INC. Report prepared by: Advanced Compliance Lab Report number: 0048-110202-01-FCC Lab Code: 200101 The test result in this report IS supported and covered by the NVLAP accreditation 6 Randolph Way Hillsborough, NJ 08844 Tel: (908) 927 9288 Fax: (908) 927 0728 Advanced Compliance Laboratory FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 2 Table of Contents Report Cover Page .................................................................................................... 1 Table of Contents ...................................................................................................... 2 Figures ....................................................................................................................... 3 1. GENERAL INFORMATION ............................................................................... 4 1.1 Verification of Compliance ...................................................................... 4 1.2 Equipment Modifications ........................................................................ 5 1.3 Product Information ................................................................................ 6 1.4 Test Methodology..................................................................................... 6 1.5 Test Facility .............................................................................................. 6 1.6 Test Equipment ........................................................................................ 6 1.7 Statement of the Document Use............................................................... 7 2. PRODUCT LABELING........................................................................................ 8 3. SYSTEM TEST CONFIGURATION................................................................... 9 3.1 Justification .............................................................................................. 9 3.2 Special Accessories ................................................................................... 9 3.3 Configuration of Tested System .............................................................. 9 4. SYSTEM SCHEMATICS ..................................................................................... 13 5. RADIATED EMISSION DATA........................................................................... 14 5.1 Field Strength Calculation....................................................................... 14 5.2 Test Methods and Conditions.................................................................. 14 5.3 Test Data .................................................................................................. 14 6. EUT RECEIVING MODE VERIFICATION ...................................................... 19 7. PHOTOS OF TESTED EUT................................................................................. 20 FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 3 Figures Figure 2.1 FCC ID Label........................................................................................... 8 Figure 2.2 Location of Label on Back of the EUT.................................................... 8 Figure 3.1 Radiated Test Setup, Position 1 .............................................................. 10 Figure 3.2 Radiated Test Setup, Position 2 .............................................................. 11 Figure 3.3 Radiated Test Setup, Position 3 .............................................................. 12 Figure 4.1 EUT Schematics ....................................................................................... 13 Figure 7.1 Front View ............................................................................................... 21 Figure 7.2 Back View ................................................................................................ 22 Figure 7.3 Inside View............................................................................................... 23 Figure 7.4 PCB Component View............................................................................. 24 Figure 7.5 PCB Foil View......................................................................................... 25 Figure 7.6 Temp Sensor PCB Component View ...................................................... 26 Figure 7.7 Temp Sensor PCB Foil View ................................................................. 27 FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 4 1. GENERAL INFORMATION 1.1 Verification of Compliance EUT: TEMPERATURE TAG Model: IT-733P/IT-735P/IT-736P Applicant: REMOTE PLAY, INC. Test Type: FCC Part 15C Sec. 15.249 CERTIFICATION Result: PASS Tested by: ADVANCED COMPLIANCE LABORATORY Test Date: February 02 - February 09, 2011 Report Number: 0048-110202-01-FCC The above equipment was tested by Compliance Laboratory, Advanced Technologies, Inc. for compliance with the requirement set forth in the FCC rules and regulations Part 15 subpart C. This said equipment in the configuration d…

Text truncated - open the document above for the full version.

FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 10 Figure 3.1 Radiated Test Setup, position 1 FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 11 Figure 3.2 Radiated Test Setup, position 2 FCC ID: ST2-2X73Y ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927- 0728 12 Figure 3.3 Radiated Test Setup, position 3