ST2-IT373GPXHand Sanitizer GP DIM IT-373GPX

© CenTrak 2014. All Rights Reserved. Proprietary and Confidential. IT-373GPX i-DIM •Automatically tracks hand hygiene compliance at the caregiver level •Collects data on all events at hand washing stations •Designed to integrate with Georgia Pacific hand hygiene dispensers •Multiple mechanisms to activate the dispenser •Works in conjunction with CenTrak’s full RTLS and with CenTrak’s Clinical-Grade Locating Staff Badge. The Integrated Dispenser Interface Module for the Georgia Pacific dispenser is a component of CenTrak’s Clinical-Grade Hand Hygiene Compliance Solution – the healthcare industry’s only solution designed to automatically monitor hygiene dispenser usage by caregivers as well as their entry and exit to patient care areas. It eliminates costly manual monitoring, and proactively alerts caregivers who enter patient care environments without proper hand hygiene, to assist in compliance and behavior modification. IT-373GPX units integrate with Georgia Pacific dispensers, and automatically communicate a specific caregiver’s badge ID from patient care areas along with hand hygiene events, based upon hospital determined compliance business rules. The i-DIM communicates each event to the network which records each caregiver’s compliance performance. All of the recorded data is stored on CenTrak’s local or hosted server and can be accessed by third party compliance management and reporting solutions. The LED indicator on the Dispenser flashes light for confirmation when the dispenser is activated and detects a care giver with a CenTrak badge is within range (approximately 4 feet). The i-DIM captures all hand hygiene events whether or not a caregiver is in direct line of sight of the module using a combination of technologies. Unlike other hand hygiene compliance solutions, CenTrak is able to capture 100% of clinical hand washing events without errors. IT-373GPX i-DIM CenTrak, Inc. 125 Pheasant Run Newtown, PA 18940 t: 215-860-2928 e: [email protected] www.centrak.com IT-373GPX shown integrated with a GP dispenser IT-373GPX shown integrated Internal view © CenTrak 2014. All Rights Reserved. Proprietary and Confidential. IT-373GPX i-DIM Technical Specifications Operation FCC Operating Frequency Range 902-928 MHz Maximum transmission power 1 mW peak Low Frequency 125 KHz Indicators LED Indicators Not on unit; Enables integrated blue confirmation LED light on GP Dispenser Environmental Operating Temperature 0 C to +50 C Storage temperature -30 C to +70 C Operating Humidity 10% to 90% non-condensing Power Battery type N/A, GA Dispenser powered Note: Must use CenTrak disinfection procedure. Other methods may void product warranty. Activation Sensors Proximity and/or Motion Optional configurations Low Frequency Range Up to 4 feet This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532. L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CenTrak, Inc. 125 Pheasant Run Newtown, PA 18940 t: 215-860-2928 e: [email protected] www.centrak.com Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Date: December, 4 2014 FCC Confidentiality Request In accordance with 0.459 & 0.457 of CFR 47, please, accept this letter as an official request to have the following kept as confidential for the reference IDs: Model number: IT-373GPX And: FCC: ST2-IT373GPX The information provided is for the sole purpose of inclusion as exhibits in the Application for Certificate of the FCC & IC IDs stated above: We ask to keep confidential the following DIM (model# IT-373GPX) documents:  Schematics  Block Diagram  Operational description Sincerely, Israel Amir, CTO CenTrak, Inc. 125 Pheasant Run Newtown, PA 18940 215.860.2928

Date: 5/27/2014 To whom it may concern: We, the undersigned, hereby authorize Wei Li, Advanced Compliance Labo ratory, Inc., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Advanced Compliance Laboratory, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are no t subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). I n authorizing Advanced Compliance Laboratory, Inc. as our agent, we still recognize that we are responsibl e to: • comply with the relevant provisions of the certification program; • make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; • make claims regarding certification only in respect of the scope for which certification has been granted; • do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; • upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; use certification only to indicate the products are certified as being in conformity with specified standards; • endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; • ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; • keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; • take appropriate action with respect to such complaints and any deficiencies found in products or se rvices that affect compliance with the requirements for certification; 5 Caufield Place Ste 102, Newtown PA 189 40 i Tel 215.860.2928 i Fax 215.359.0659 i www.centrak.com • document the actions taken This authorization is valid until further written notice from the a pplicant. Sincerely Yours, Printed Name: Israel Amir Title: CTO Company: CenTrak, Inc. z Page 2

Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 21 7.1 Front & Back View Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 22 7.2 Right & Left Side View Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 23 7.3 EUT Rear View

Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 8 2. PRODUCT LABELING Figure 2.1 FCC ID Label Figure 2.2 Location of Label on the Side of EUT Centrak Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX This device complies with part 15 of the FCC & IC RSS-210 & RSS-Gen Rules. Operating is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Figure 2.2 Location of the Label ID Label Figuare 2.1 ID Label

Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 24 7.4 EUT Cover Open View Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 25 7.5 Georgia Pacific DIM Section TopView 7.6 Georgia Pacific DIM Section Bottom View-with LF Antenna Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 26 7.7 Georgia Pacific DIM Section Inside View Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 27 7.8 DIM Controller & Power PCB Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 28 7.9 DIM 900MHz TRx PCB Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 29 7.10 DIM Low Frequency Tx PCB Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 30 7.11 DIM Low Frequency Tx PCB-Side View

ELECTROMAGNETIC EMISSION COMPLIANCE REPORT Of Georgia Pacific DIM MODEL: IT-373GPX FCC ID: ST2-IT373GPX December 02, 2014 This report concerns (check one): Original grant x Class II change Equipment type: Low Power Intentional Radiator Deferred grant requested per 47 CF 0.457(d)(1)(ii)? yes no x If yes, defer until: (date) Company agrees to notify the Commission by (date) of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? yes no x If no, assumed Part 15, Subpart B for unintentional radiators - the new 47 CFR [10-1-90 Edition] provision. Report prepared for: CENTRAK, INC. Report prepared by: Advanced Compliance Lab Report number: 0048-141125-01 Lab Code: 200101 The test result in this report IS supported and covered by the NVLAP accreditation 6 Randolph Way Hillsborough, NJ 08844 Tel: (908) 927 9288 Fax: (908) 927 0728 Advanced Compliance Laboratory Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 2 Table of Contents Report Cover Page .................................................................................................... 1 Table of Contents ...................................................................................................... 2 Figures ....................................................................................................................... 3 1. GENERAL INFORMATION ............................................................................... 4 1.1 Verification of Compliance ...................................................................... 4 1.2 Equipment Modifications ........................................................................ 5 1.4 Test Methodology ..................................................................................... 6 1.5 Test Facility .............................................................................................. 6 1.6 Test Equipment ........................................................................................ 6 1.7 Statement for the Document Use ............................................................. 7 2. PRODUCT LABELING ........................................................................................ 8 3. SYSTEM TEST CONFIGURATION ................................................................... 9 3.1 Justification .............................................................................................. 9 3.2 Special Accessories ................................................................................... 9 3.3 Configuration of Tested System .............................................................. 9 4. SYSTEM SCHEMATICS ..................................................................................... 12 5. RADIATED EMISSION DATA ........................................................................... 13 5.1 Field Strength Calculation ....................................................................... 13 5.2 Test Methods and Conditions .................................................................. 13 5.3 Test Data .................................................................................................. 13 5.4 125KHz Transmission Radiated Test Data ............................................. 17 6. EUT RECEIVING MODE VERIFICATION ...................................................... 19 7. PHOTOS OF TESTED EUT................................................................................. 20 Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 3 Figures Figure 2.1 ID Label................................................................................................... 8 Figure 2.2 Location of Label on Back of the EUT.................................................... 8 Figure 3.1 Radiated Test Setup..............................................................10-11 Figure 4.1 EUT Schematics ....................................................................................... 12 Figure 7.1-7.x EUT Details.................................................................21-30 Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 4 1. GENERAL INFORMATION 1.1 Verification of Compliance EUT: Georgia Pacific DIM Model: IT-373GPX Applicant: CENTRAK, INC. Test Type: FCC Part 15 Sub Part 15.249 & 15.209 Result: PASS Tested by: ADVANCED COMPLIANCE LABORATORY Test Date: December 01, 2014 Report Number: 0048-141125-01 The above equipment was tested by Compliance Laboratory, Advanced Technologies, Inc. for compliance with the requirement set forth in the FCC/IC rules and regulations Part 15 subpart C. This said equipment in the configuration described in the report, shows the maximum emission levels emanating from equipment are within the compliance requirements. The estimated uncertainty of the test result is given as following. The method of uncertainty calculation is provided in Advanced Compliance Lab. Doc. No. 0048-01-01. Prob. Dist. Uncertainty(dB) Uncertainty(dB) Uncertainty(dB) 30-1000MHz 1-6.5GHz Conducted Combined Std. Uncertainty u c norm. ±2.36 ±2.99 ±1.83 ____________________ Wei Li Date December 01, 2014 Lab Manager Advanced Compliance Lab Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 5 1.2 Equipment Modifications N/A Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ———————————————————…

Text truncated - open the document above for the full version.

Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 10 Georgia Pacific DIM Model No.: IT-373GPX FCC ID: ST2-IT373GPX ——————————————————————————————————————————————— Advanced Compliance Lab, 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 11 Figure 3.1 Radiated Test Setup