STSIC5100INDUSTRIAL PDA POS

IC5100 Manual 1/60 MODEL : IC5100 User’s Manual Bitel Co., Ltd. IC5100 Manual 2/60 TABLE OF CONTENTS User’s warning. .........................................................................................1 Product component.....................................................................................2 IDLE PROMPT / MAIN MENU.....................................................................3 New Transaction MENU..............................................................................4 Credit Sale MENU......................................................................................5 Debit Sale MENU.......................................................................................6 Check Authorization / Verification MENU.........................................................7 Refund Credit Card MENU............................................................................8 Refund Debit Card MENU........................................................................... 9 Off-line Sale MENU(also called force sale)...................................................... 10 Auth only.......................................................................................... ....11 Mail / Phone Order(AVS) Sale MENU............................................................12 Reports MENU – Bath Reporting...................................................................13 Batch Functions........................................................................................14 Setup....................................................................................................15 IC5100(EMV approval) / New Transaction.........................................................16 IC5100(EMV approval) / Credit Sale.................................................................17 IC5100(EMV approval) / Balance Inquiry..........................................................18 IC5100(EMV approval) / Cash Advance............................................................19 IC5100(EMV approval) / Refund.....................................................................20 IC5100(EMV approval) / Void........................................................................21 IC5100(EMV approval) / Settlement.................................................................22 IC5100(EMV approval) / View Transaction.........................................................23 IC5100(EMV approval) / Print Total.................................................................24 IC 5100(EMV approval) / Logon Terminal..........................................................25 IC5100(EMV approval) / Terminal Setup.......................................................... 26 IC5100(EMV approval) / Contrast Set...............................................................27 IC5100(EMV approval) / Changing Pin.............................................................28 IC5100(EMV approval) / Basic Test.................................................................29 Key, ICON component of IC5100........................................................................30 SAM, SIM, RUIM SOCKET........................................................................31 Troubleshooting.................................... ................................................. ...32 Bitel co., Ltd. IC5100 Manual 3/60 User’s Warning Bitel co., Ltd. IC5100 Manual 4/60 Product component Receipt Box Receipt Out Magnetic card opening Display screen device Paper forward key IC card opening Serial port Power plug Battery charge LED Battery charge LED Power plug Serial port USB port Magnetic card opening IC card opening Bitel co., Ltd. USB port IC5100 Manual 5/60 IDLE PROMPT / MAIN MENU # Terminal Screen Descriptions for Key Operation and Summary 1 Enter or Swipe Card. 2 *, # keys are scroll menu.(1 line) 3 Displays next page of menu items. *, # keys are scroll menu.(1 line) New Transaction MENU # Terminal Screen Descriptions for Key Operation and Summary 1 Press any key (0-9, *, #) to Activate Main Menu. Press Enter Key to select New transaction function. 2 New Transaction Menu. *, # keys are scroll menu.(1 line) 3 Bitel co., Ltd. FLEX 5100 SWIPE CARD MAY 01, 03 23:51 Reports Batch Functions <- -> Setup Reports Batch Functions Setup Refund Void <- -> Off-line Sale <- -> Mail / Phone Order <- -> IC5100 Manual 6/60 Credit Sale MENU # Terminal Screen Descriptions for Key Operation and Summary A 1 Press F1 or Enter key to begin Sale transaction. A 2 Press F1 for Credit Sale or Press Enter key. B 1 Press F1 or Enter key to begin Sale transaction. B 2 Press F1 for Credit Sale or Press Enter key. 3 Swipe Card or Input Account Number. 4a Manual Entry: Enter expiration Date and press enter. 4b Display only when CVV2 pro- cessing option is ON. Press F1, F3, F4 and move to Step 6. Press F2 and move to step 4c. Debit Check <- -> EBT Refund Vo i d <- -> Off-line Sale Swipe Card Or Key Account Number Enter Expiration Date [ MM/YY ] / CVV2 Present CVV2 Illegible CVV2 Not Presen t Refund Vo i d <- -> Ticket Onl y Debit IC5100 Manual 7/60 4c Skip to step 6 after CVV2 is entered. 5 Card Swipe Only: Enter 4 digits and press Enter key. 6 Enter Amount. Press Enter key. 7 Enter Tip Amount. Press Enter key. 8 Enter Server ID Press Enter key. 9 No key operation. 10 Line Connected.. No key operation. Enter Last 4 Num From Account Number LINE CONNECTED. Enter CVV2 data From Customer Card Enter Amount $00.00 PROCESSING NOW. > Enter Tip Amount $00.00 Enter Server ID IC5100 Manual 8/60 11 Data Sending. No key operation. 12 Data Receiving. No key operation. 13 Display and Print Out Sales and Authorization Code. APPROVAL 123456 DATA SENDING DATA RECEIVING IC5100 Manual 9/60 Debit Sale MENU # Terminal Screen Descriptions for Key Operation and Summary A 1 Press F1 or Enter key to begin Sale transaction. A 2 Press F2 for Debit Sale or Press scroll key to highlight Debit function then press the Enter key. B 1 Press F1 or Enter key to …

Text truncated - open the document above for the full version.

FCC, Request for non-disclosureDate: April 06, 2011 Page 1 of 1 Bitel Co., Ltd. 11F Yohyun B/D 242-29 Nonhyun-dong Gangnam-gu, Seoul, South Korea Subject:Request for confidentiality FCC ID: STSIC5100 Reference number: Dear FCC TCB, Persuant to 47 CFR Section 0.459(a) & (b), <name applicant> hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID: (STSIC5100) Bill(s) of Material☑ Block Diagrams☑ Operational Description☑ Schematic Diagrams☑ Above materials contain secrets, proprietary and technical information,whichwould customarily be quarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to otherparties could cause substantial competitive harm and provide unjustified benefits for competitors. <Name applicant> understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. <Date>April 06, 2011 <City> Seoul <Nameandsignatureofapplicant> Signature: Name/Title:HunSung, Jung / Manager

Bitel Co., Ltd. 11F Yohyun B/D 242-29 Nonhyun-dongGangnam-gu, Seoul, South Korea April 06, 2011 Subject:DoC declaration To Whom it may concern, We, Bitel Co., Ltd. of the above addresshereby declare, at our sole responsibility, that our INDUSTRIAL PDA POS (FCC ID : STSIC5100) is in compliance with the following FCC requirements. The INDUSTRIAL PDA POS has the module, which is based on granted model (FCC ID: O9EQ2686). An install place of the originally granted module became the change. It is installed at the INDUSTRIAL PDA POS inside. And this time we are going to obtain the FCC grantof the INDUSTRIAL PDA POS itself with portable configuration as new application. Test Laboratory : Korea Standard Quality Laboratories #102, Jangduk Dong, Hwasung City, Kyunggi Do, South Korea Regards, Signature: Name/Title:HunSung, Jung / Manager Company Name:Bitel Co., Ltd. Address:11F Yohyun B/D 242-29 Nonhyun-dong Gangnam-gu, Seoul, South Korea TEL:+82-2-545-2630 FAX:+82-2-545-0190 E-mail: [email protected]

Photo 1: Exterior Photographs Top Bottom Side 1 Side 2 Side 3 Side 4 Label Adaptor

Label Information 1. Label Location Label position 2. Label Drawing 43mm 19mm

Interior view of EUT Internal Photos View of Main PCB(Top) View of Main PCB(Bottom) View of Wireless Module View of Wireless Module (Zoom) View of Sub 1 PCB(Top) View of Sub 1 PCB(Bottom) View of Sub 2 PCB(Top) View of Sub 2 PCB(Bottom) View of Sub 3 PCB(Top) View of Sub 3 PCB(Bottom) View of Sub 4 PCB(Top) View of Sub 4 PCB(Bottom) View of LCD (Top) View of LCD(Bottom) View of Battery

ABDG1M5121-A00 VER 1.0(100622) I [LEAD FREE] MSL Level 1 Approval Sheet 2010. 06. 22 MicroRF Co., Ltd. TEL. 82-2-6406-5590 FAX. 82-2-6406-5591 Product Dual band PCB Antenna Customer Bitel Model IC 5100 Customer Code Supplier MicroRF Co., LTD. Supplier Code ABDG1M5121-A00 Customer Designed by Checked by Approved by MicroRF Designed by By checked By approved R&D QC R&D Junyoung, Kwon Sunmo, Kang Seungyun, Kim ABDG1M5121-A00 VER 1.0(100622) II [LEAD FREE] MSL Level 1 SPECIFICATION Model : IC 5100 Dual band PCB Antenna Designed by Approved by Approved by R&D QC R&D Junyoung, Kwon Sunmo, Kang Seungyun, Kim 100622 100622 100622 2010. 06. 22 MicroRF Co., Ltd. TEL. 82-02-6406-5590 FAX. 82-02-6406-5591 ABDG1M5121-A00 VER 1.0(100622) III Contents 1. Revision History ------------------------------------------- 1 2. Features and Applications ------------------------------------ 2 3. Code No. ------------------------------------------------ 2 4. Electrical Specifications ------------------------------------- 2 5. Mechanical Dimensions ------------------------------------- 5 6. Measurement Method and Conditions --------------------------- 6 7. Environmental Specifications --------------------------------- 7 8. Environmental Tests and conditions ---------------------------- 8 9. RoHS Data ----------------------------------------------- 9 ABDG1M5121-A00 VER 1.0(100622) １ 1. Revision History Product Dual band PCB Antenna Model IC 5100 CODE NO. ABDG1M5121-A00 Rev No. Date Name Page Item Revision Issue 1.0 100622 J.Y.Kwon Issued ABDG1M5121-A00 VER 1.0(100622) ２ 2. FEATURES AND APPLICATIONS This dual band PCB Antenna is applied to GSM900/DCS band applications. 3. CODE NO. CODE NO. : ABDG1M5121-A00 CUSTOMER PART NO. : 4. ELECTRICAL SPECIFICATIONS 4-1. * All items are measured in room temperature (25°C). * All items are measured at customer set condition. No. Contents Standards UnitConditions Min. Typ. Max. 1 GSM900 Band 880 960 MHz Tx: 880∼915MHz Rx: 925∼960MHz DCS Band 1710 1880 MHz Tx: 1710∼1785MHz Rx: 1805∼1880MHz 2 Impedance 50 Ω 3 Gain of GSM900 -3 2 dBi Max. Gain in all direction Gain of DCS 0 3 dBi Max. Gain in all direction 4 V.S.W.R. of GSM900 2 4 880 MHz 2 4 960 MHz V.S.W.R. of DCS 3 3.5 1710 MHz 2 3.5 1880 MHz ABDG1M5121-A00 VER 1.0(100622) ３ 4-2 VSWR and Smith Chart data (S11 of SET condition) ABDG1M5121-A00 VER 1.0(100622) ４ 4-3 Radiation Patterns GSM900 Band Peak Value(Beam Peak :dBi) Azimuth Plane Elevation 1 Elevation 2 880 MHz -3.352 -0.175 0.704 920 MHz -0.962 1.977 2.294 960 MHz -0.260 1.755 1.658 (a) Azimuth Plane (XY) – Horizontal Polarization (b) Elevation1 Plane (ZX) – Vertical Polarization (c) Elevation2 Plane (YZ) – Vertical Polarization DCS Band Peak Value(Beam Peak :dBi) Azimuth Plane Elevation 1 Elevation 2 1710 MHz -2.183 -0.694 0.693 1795 MHz -2.140 1.462 0.386 1880 MHz -1.860 3.016 0.313 (a) Azimuth Plane (XY) – Horizontal Polarization (b) Elevation1 Plane (ZX) – Vertical Polarization (c) Elevation2 Plane (YZ) – Vertical Polarization ABDG1M5121-A00 VER 1.0(100622) ５ 5. MECHANICAL DIMENSIONS ( Unit : mm ) - PCB Thickness : 1.0 - Cable Diameter : 1.2 ABDG1M5121-A00 VER 1.0(100622) ６ 6. Measurement Method and Conditions The measurement of antenna performance is measurement of gain, radiation pattern using ORBIT/FR apparatus in Anechoic chamber and measurement of VSWR using Network analyzer. 6-1. The measurement of Frequency and VSWR NETWORK ANALYZER [8753] <Measurement Method> 1) As seen the above, network analyzer is set up for S11 measurement. 2) The measurement frequency range is to set up from 500MHz to 2.5 GHz. 3) Perform S11 one port full calibration. 4) Measure the VSRW of GSM900/DCS frequency range. 6-2. The measurement of Gain and Radiation Patterns NETWORK ANALYZER [8753] <Measurement Method> 1) As seen the above, network analyzer is to set up in Anechoic chamber. 2)As seen the beneath, for the measurement planes as Azimuth, Elevation1, and Elevation2, measure Gain data of vertical polarization and horizontal polarization for each plane. ABDG1M5121-A00 VER 1.0(100622) ７ -90° 90° 180° 0° -90° 90° 180° 0° 90° -90° 180° 0° (AZIMUTH PLANE) (ELEVATION1 PLANE) (ELEVATION2 PLANE) 7. ENVIRONMENTAL SPECIFICATIONS No. Items Specifications 1 Material Pb-free system 2 Operating Temperature Range -30 ~ +85 °C 3 Operating Humidity Range 45 ~ 85 % RH ABDG1M5121-A00 VER 1.0(100622) ８ 8. ENVIRONMENTAL TESTS No. Item Test Conditions 1 High Temperature Storage Leave for 72±2 hours in a test bath retaining 85±2°C. After then, leave on the test conditions for 1.5 hours. 2 Low Temperature Storage Leave for 72±2 hours in a test bath retaining -30±2°C. After then, leave on the test condition for 1.5 hours. 3 Static Humidity Leave for 24±2 hours in a test bath retaining 90~95% RH / 50±3°C. After then, leave in the test condition for 1.5 hours. 4 Thermal Shock Cool from 25°C down to -30±2°C and leave for 30 minutes. After that, heat up to +85±2°C and leave for 30 minutes. After then, cool down to 25°C. Repeat the cycle 15 times and leave on the test conditions for 1.5 hours. 5 Drop Shock Drop 150g weight onto steel floor from the height of 152cm, 19 times and 120cm, 12 times. 6 Vibration With 5g of the whole acceleration at 20 to 2000 Hz, apply a vibration for 2 hours for each of 3 directions. 7 Solder Proof No reaching after reflow for 5±1 sec at 260°C. 8 Soldering Conditions 230±5°C / 5±1 sec for Sn/Pb soldering system 245±5°C / 2±1 sec for Pb-free soldering system ABDG1M5121-A00 VER 1.0(100622) ９ 9 .RoHS Data ABDG1M5121-A00 VER 1.0(100622) １０ ABDG1M5121-A00 VER 1.0(100622) １１ ABDG1M5121-A00 VER 1.0(100622) １２ ABDG1M5121-A00 VER 1.0(100622) １３ ABDG1M5121-A00 VER 1.0(100622) １４ ABDG1M5121-A00 VER 1.0(100622) １５ ABDG1M5121-A00 VER 1.0(100622) １６ ABDG1M5121-A00 VER 1.0(100622) １７ ABDG1M5121-A00 VER 1.0(100622) １８ ABDG1M5121-A00 VER 1.0(100622) １９

APPLICANT NAME & ADDRESS :DATA & LOCATION OF TESTING Dates of testing : Test Site : ESTECH Co., Ltd. 97-1, Hoeok-Ri, Majang-Myun, Icheon-City, Kyonggi-Do, 467-811, Korea Test Device : Test report no :Number of page : Contact person :Responsible test Engineer : Applicant Type : FCC CLASSIFICATION : FCC Rule Part(s) : Test results : Date and Signatures : 2011-4-7 Report Prepared By : Engineer/ H. H. Lee (Signature) Engineering Manager/ J. M. Yang (Signature) Test report no : ESTSAR1104-001 EST-QP-20-01(1)-(SAR)Web : www. estech. co. kr Page 1 of 21 HunSung, Jung(Manager) The Tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced recept in full, without written approval of the laboratory. IEEE 1528(Dec.2003) Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate(SAR) in the Human Body Due to Wireless Communications Device : Experimental Techniques Certification PCS Licensed Transmitter worn on body(PCT) §2.1093; FCC/OET Bulletin 65 Supplement C (July 2001) Testing has been Carried out in Accordance with : SAR Compliance Test Report ESTSAR1104-00121 11F Yohyun B/D, 242-29, Nonhyun-dong, Gangnam-gu, Seoul, South Korea Model : IC5100 TYPE : INDUSTRIAL PDA POS 2011-4-5 ~ 2011-4-7Bitel Co.,Ltd. H. H. Lee 1. SUMMARY FOR SAR TET REPORT --------------------------------------------------------------------- 3 1.1 Head Configuration ----------------------------------------------------------------------------------------- - 3 1.2 Body Worn Configuration --------------------------------------------------------------------------------- - 3 1.3 Measurement Uncertainty -------------------------------------------------------------------------------- - 3 2. INTRODUCTION ----------------------------------------------------------------------------------------------- - 4 3. DESCRIPTION OF THE DEVICE UNDER TEST ------------------------------------------------------ 5 3.1 Antenna Description ---------------------------------------------------------------------------------------- 5 3.2 Device Description ------------------------------------------------------------------------------------------ - 5 3.3 Battery Option ------------------------------------------------------------------------------------------------ 5 4. TEST CONDITIONS ------------------------------------------------------------------------------------------- - 6 4.1 Ambient Conditions ----------------------------------------------------------------------------------------- 6 4.2 RF Characteristics of The Test Site -------------------------------------------------------------------- - 6 4.3 Test Signal, Frequencies, And Output Power -------------------------------------------------------- - 6 5. DESCRIPTION OF THE TEST EQUIPMENT ----------------------------------------------------------- - 7 5.1 Test System Specifications ------------------------------------------------------------------------------- 7 5.2 SAR Measurement Setup --------------------------------------------------------------------------------- 7 5.3 DASY 4 E-Field Probe System -------------------------------------------------------------------------- - 8 5.4 Phantom & Equivalent Tissues -------------------------------------------------------------------------- - 10 6. DESCRIPTION OF THE TEST PROCEDURE --------------------------------------------------------- - 12 6.1 Definition of Reference Point ----------------------------------------------------------------------------- 12 6.2 Test Configuration Positions ----------------------------------------------------------------------------- - 13 6.3 Scan Procedures -------------------------------------------------------------------------------------------- - 16 6.4 SAR Averaging Methods ---------------------------------------------------------------------------------- - 16 7. MEASUREMENT UNCERTAINTY ------------------------------------------------------------------------- 17 8. SYSTEM VERIFICATION ------------------------------------------------------------------------------------ - 18 8.1 Tissue Verification ------------------------------------------------------------------------------------------- - 18 8.2 Test System Validation ------------------------------------------------------------------------------------ - 18 9. RESULTS -------------------------------------------------------------------------------------------------------- - 19 10. REFERENCES ------------------------------------------------------------------------------------------------ - 21 APPENDIX A : Validation Test Data of Tissue APPENDIX B : Validation Test Data APPENDIX C : SAR Test Data APPENDIX D : Test Setup Photo APPENDIX E : Calibration Certificates Test report no : ESTSAR1104-001 EST-QP-20-01(1)-(SAR)Web : www. estech. co. kr Page 2 of 21 Table of Contents 1.1 Body Worn Configuration Max. SAR Measurement MHz ChdBm 824.2 128 GSM 33.020 mm 1909.8 810 GSM 30.020 mm 1.2 Measurement Uncertainty Test report no : ESTSAR1104-001 EST-QP-20-01(1)-(SAR)Web : www. estech. co. kr Page 3 of 21 ± 19.97 (k=2, 95% CONFIDENCE LEVEL) Combine Standard Uncertainty Extended Standard Uncertainty ± 9.99 (k=1) EUT Type Max. RF Output Power GSM850 : 33 dBm GSM1900 : 30 dBm INDUSTRIAL PDA POS Transmitting Frequency Range(s) GSM850 : 824.2 MHz ~ 848.8 MHz GSM1900 : 1850.2 MHz ~ 1909.8 MHz 1. SUMMARY FOR TEST REPORT Date of test Final reviewer Responsible test engineer 2011-4-5 ~ 2011-4-7 H.H.Lee J.M.Yang FREQUENCY Modulation Separation test position Conducted Power(dBm) Battery Standard Standard SAR (W/kg) 0.269 0.106 SAR Definition Figure 2.1 SAR Mathematical Equation SAR is expressed in units of Watts per Kilogram (W/kg). SAR = σ E² / ρ Where: σ = conductivity of the tissue-simulant material (S/m) E = mass density of the tissue-simulant material (kg/㎥) ρ = Total RMS electric field strength (V/m) Test report no : ESTSAR11…

Text truncated - open the document above for the full version.

Report Number : KSQ-FCC-R110403FCC ID : STSIC5100 Page 2 /34 TABLE OF CONTENTS 1. GENERAL.................................................................................................................................................4 2. TEST SITE.................................................................................................................................................4 2.1 Location................................................................................................................................................4 2.2 Test Date...............................................................................................................................................4 2.3 Test Environment..................................................................................................................................4 3. DESCRIPTION OF THE EQUIPMENT UNDER TEST..........................................................................5 3.1 Rating and Physical Characteristics.......................................................................................................5 3.2 Equipment Modifications......................................................................................................................5 3.3 Submitted Documents...........................................................................................................................5 4. MEASUREMENT CONDITIONS............................................................................................................6 4.1 Tested frequency...................................................................................................................................6 4.2 List of Peripherals.................................................................................................................................6 4.3 Type of Used Cables..............................................................................................................................6 5. TEST AND MEASUREMENT.................................................................................................................7 5.1 RADIATED POWER...........................................................................................................................8 5.1.1 Regulation.......................................................................................................................................8 5.1.2 Test Procedure.................................................................................................................................8 5.1.3 Substitution RF power measurement at KSQ..................................................................................8 5.1.4 Test Result.......................................................................................................................................9 Table 1 : Measured values of the Radiated Power(GSM850).................................................................................10 Table 2 : Measured values of the Radiated Power(PCS 1900)..................................................................................10 5.2 SPURIOUS RADIATION..................................................................................................................11 5.2.1 Regulation.....................................................................................................................................11 5.2.2 Test Procedure...............................................................................................................................11 5.2.3 Test Results...................................................................................................................................11 5.2.4 Purpose.........................................................................................................................................11 Table 3-Table 5 : Measured values of the Spurious Radiation(GSM850)...............................................................12 5.2.5 Test Procedure...............................................................................................................................14 5.2.6 Test Results...................................................................................................................................14 5.2.7 Purpose.........................................................................................................................................14 Table6-Table 8 : Measured values of the Spurious Radiation(PCS 1900)...................................................................15 5.3 RECEIVER RADIATED EMISSIONS..............................................................................................17 5.3.1 Regulation.....................................................................................................................................17 5.3.2 Test Result.....................................................................................................................................17 Table 9 : Measured values of the Receiver Radiated Emissions.................................................................................17 Report Number : KSQ-FCC-R110403FCC ID : STSIC5100 Page 3 /34 5.4 FIELD STRENGTH...........................................................................................................................18 5.4.1 Regulation.....................................................................................................................................18 5.4.2 Test Procedure...............................................................................................................................18 5.4.3 Test Condition...............................................................................................................................18 5.4.4 Test Result..................................................................................................................…

Text truncated - open the document above for the full version.