SVN-ASI7213X-T1Face Recognition Access Controller

User’s Manual Face Recognition Access Controller User’s Manual V1.0.0 V1.0.0 I Foreword General This manual introduces the installation and basic operations of the Face Recognition Access Controller (hereinafter referred to as "access controller"). Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning DANGER Indicates a high potential hazard which, if not avoided, will result in death or serious injury. WARNING Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. CAUTION Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. TIPS Provides methods to help you solve a problem or save you time. NOTE Provides additional information as the emphasis and supplement to the text. Revision History Version Revision Content Release Time V1.0.0 First release. September 2020 About the Manual  The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail.  We are not liable for any loss caused by the operations that do not comply with the manual.  The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail.  All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation.  There still might be deviation in technical data, functions and operations description, or II errors in print. If there is any doubt or dispute, we reserve the right of final explanation.  Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.  All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners.  Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device.  If there is any uncertainty or controversy, we reserve the right of final explanation. III Important Safeguards and Warnings This chapter describes the contents covering proper handling of the access controller, hazard prevention, and prevention of property damage. Read these contents carefully before using the access controller, comply with them when using, and keep them well for future reference. Operation Requirement  Do not expose the access controller to direct sunlight or heat source.  Do not install the access controller in a humid or dusty area.  Install the access controller horizontally at stable places to prevent it from falling.  Do not drip or splash liquids onto the access controller; do not put on the access controller anything filled with liquids.  Install the access controller at well-ventilated places and do not block its ventilation opening.  Operate the access controller within rated input and output range.  Do not disassemble the access controller by yourself.  Transport, use and store the access controller under allowed humidity and temperature.  For the access controller with a temperature monitoring unit: Install the temperature monitoring unit in a windless indoor environment, and maintain  the indoor ambient temperature at 15°C to 32°C. Warm up the temperature monitoring unit for more than 20 minutes after power-on to  enable the temperature monitoring unit to reach thermal equilibrium. Electrical Safety  Improper battery use might result in fire or explosion.  When replacing battery, make sure that the same model is used.  Use recommended power cables in the region under their rated specification.  Use the power adapter provided with the access controller; otherwise, it might result in injury and device damage.  The power supply should conform to the Safety Extra Low Voltage (SELV) requirements, and supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. Please note that the power supply requirement is subject to the device label.  Connect the device (I-type structure) to the power socket with earthing.  The appliance coupler is a disconnection device. When using the coupler, keep the angle for easy operation. IV Table of Contents Foreword .................................................................................................................................................... I Important Safeguards and Warnings .................................................................................................... III 1 Overview ................................................................................................................................................. 1 Introduction ................................................................................................................................... 1 1.1 Features ........................................................................................................................................ 1 1.2 Application ..................................................................................................................................... 1 1.3 Dimension and Component .......................................................................................................... 2 1.4 2 Connection and Installation ................................................................................................................. 4 Cable Connections ........................................................................................................................ 4 2.1 Installation Notes............................…

Text truncated - open the document above for the full version.

ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Date: 2021-03-23 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL-CCIC COMPANY LIMITED to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL-CCIC COMPANY LIMITED on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL-CCIC COMPANY LIMITED as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Contact Name: Yolanda chen Title of Person：Certificate Engineer Address: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R.China

ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID：SVN-ASI7213X-T1 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Contact Name: Yolanda chen Title of Person：Certificate Engineer Address: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R.China Date:2021/03/23

ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Address: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R.China Confirmation Letter We, ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. The product: Face Recognition Access Controller And model No.: DHI-ASI7213X-V1-T1;DH-ASI7213X-V1-T1;ASI7213X-V1-T1;DHI-ASI7213X-T1; DH-ASI7213X-T1;ASI7213X-T1;DHI-ASI7213X;DH-ASI7213X;ASI7213X;K1X DH-ASI7213X-V1-T1;ASI7213X-V1-T1;DHI-ASI7213X-T1;DH-ASI7213X-T1;ASI7213X- T1;DHI-ASI7213X;DH-ASI7213X;ASI7213X;K1X have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction, with DHI-ASI7213X-V1-T1. The difference is only Lens/trademark/ or the name of the models Best Regards Company Name: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Contact Name: Yolanda chen Title of Person：Certificate Engineer Address: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R.China

Appendix I External Photographs Page 2 of 5 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. All View of EUT Top View of EUT Page 3 of 5 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Bottom View of EUT Front View of EUT Page 4 of 5 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Back View of EUT Left View of EUT Page 5 of 5 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Right View of EUT

Face Recognition Access Controller P/N:1.0.01.25.11282 S/N: 12V ,4A MADE IN CHINA DHI-ASI7213X-V1-T1 ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. MAC2: 6M078BDPAG00001 AA:BB:CC:11:22:33 MAC1:AA:BB:CC:11:22:00 FCC ID:SVN-ASI7213X-T1

Appendix II Internal Photographs Page 2 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Open View of EUT Internal View of EUT-1 Page 3 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-2 Internal View of EUT-3 Page 4 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-4 Internal View of EUT-5 Page 5 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-6 Internal View of EUT-7 Page 6 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-8 Internal View of EUT-9 Page 7 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-10 Internal View of EUT-11 Page 8 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-12 Internal View of EUT-13 Page 9 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-14 Internal View of EUT-15 Page 10 of 10 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Antenna and RF Module Location-WLAN Antenna and RF Module Location-NFC

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC RF EXPOSURE REPORT For Face Recognition Access Controller MODEL NUMBER: DHI-ASI7213X-V1-T1 ADDITIONAL MODEL NUMBER: DH-ASI7213X-V1-T1, ASI7213X-V1-T1, DHI-ASI7213X-T1, DH-ASI7213X-T1, ASI7213X-T1, DHI-ASI7213X, DH-ASI7213X, ASI7213X, K1X PROJECT NUMBER: 4789708079 REPORT NUMBER: 4789708079-2 FCC ID: SVN-ASI7213X-T1 ISSUE DATE: Feb. 26, 2021 Prepared for Zhejiang Dahua Vision Technology Co., Ltd. Prepared by UL-CCIC COMPANY LIMITED No. 2, Chengwan Road, Suzhou Industrial Park, People’s Republic of China Tel: +86 512-6808 6400 Fax: +86 512-6808 4099 Website: www.ul.com REPORT No.: 4789708079-2 Page 2 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED.. Revision History Rev. Issue Date Revisions Revised By V0 02/26/2020 Initial Issue REPORT No.: 4789708079-2 Page 3 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED.. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. REQUIREMENT ................................................................................................................. 6 REPORT No.: 4789708079-2 Page 4 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED.. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Zhejiang Dahua Vision Technology Co., Ltd. Address: No.1199, Bin’an road, Binjiang District, Hangzhou, P.R.China. Manufacturer Information Company Name: Zhejiang Dahua Vision Technology Co., Ltd. Address: No.1199, Bin’an road, Binjiang District, Hangzhou, P.R.China. EUT Description Product Name Face Recognition Access Controller Model Name DHI-ASI7213X-V1-T1 Additional No. DH-ASI7213X-V1-T1, ASI7213X-V1-T1, DHI-ASI7213X-T1, DH-ASI7213X-T1, ASI7213X-T1, DHI-ASI7213X, DH-ASI7213X, ASI7213X, K1X Sample Number 3473457 Data of Receipt Sample Dec. 10, 2020 Date Tested Dec. 10, 2020 ~ Feb. 20, 2021 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Guidelines for Human Exposure IEEE C95.1 Complies Prepared By: Reviewed By: Jason Yang Tom Tang Engineer Engineer Project Associate Authorized By: Chris Zhong Laboratory Leader REPORT No.: 4789708079-2 Page 5 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED.. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with KDB 447498 D01 General RF Exposure Guidance v06 and FCC Guidelines for Human Exposure IEEE C95.1. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4829.01) UL-CCIC COMPANY LIMITED has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1247) UL-CCIC COMPANY LIMITED has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules. IC (IC Designation No.: 25056) UL-CCIC COMPANY LIMITED has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules. Note 1: All tests measurement facilities use to collect the measurement data are located at No. 2, Chengwan Road, Suzhou Industrial Park, Suzhou 215122, People’s Republic of China Note 2: For below 30MHz, lab had performed measurements at test anechoic chamber and comparing to measurements obtained on an open field site. These measurements below 30MHz had been correlated to measurements performed on an OFS. Note 3: The test anechoic chamber in UL-CCIC COMPANY LIMITED had been calibrated and compared to the open field sites and the test anechoic chamber is shown to be equivalent to or worst case from the open field site. REPORT No.: 4789708079-2 Page 6 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED.. 4. REQUIREMENT LIMIT Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/150 30 1500-100,000 -- -- 1.0 30 Note 1: f = frequency in MHz, * means Plane-wave equivalent power density Note 2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. Note 3: The limit value 1.0mW/cm 2 is available for this EUT. MPE CALCULATION METHOD S =PG/(4πR 2 ) where: S = power density (in appropriate units, e.g. mW/ cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) REPORT No.: 4789708079-2 Page 7 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in …

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT For Face Recognition Access Controller MODEL NUMBER: DHI-ASI7213X-V1-T1 ADDITIONAL MODEL NUMBER: DH-ASI7213X-V1-T1, ASI7213X-V1-T1, DHI-ASI7213X-T1, DH-ASI7213X-T1, ASI7213X-T1, DHI-ASI7213X, DH-ASI7213X, ASI7213X, K1X PROJECT NUMBER: 4789708079 REPORT NUMBER: 4789708079-1 FCC ID: SVN-ASI7213X-T1 ISSUE DATE: Feb. 26, 2021 Prepared for Zhejiang Dahua Vision Technology Co., Ltd. Prepared by UL-CCIC COMPANY LIMITED No. 2, Chengwan Road, Suzhou Industrial Park, People’s Republic of China Tel: +86 512-6808 6400 Fax: +86 512-6808 4099 Website: www.ul.com REPORT No.: 4789708079-1 Page 2 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Revision History Rev. Issue Date Revisions Revised By V0 02/26/2021 Initial Issue REPORT No.: 4789708079-1 Page 3 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. TABLE OF CONTENTS 1.ATTESTATION OF TEST RESULTS ................................................................................. 4 2.TEST METHODOLOGY ..................................................................................................... 6 3.FACILITIES AND ACCREDITATION ................................................................................. 6 4.CALIBRATION AND UNCERTAINTY ................................................................................ 7 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................... 7 5.EQUIPMENT UNDER TEST ............................................................................................... 8 5.1. DESCRIPTION OF EUT .............................................................................................. 8 5.2. MAXIMUM OUTPUT POWER...................................................................................... 9 5.3. CHANNEL LIST ........................................................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ..........................................................................10 5.5. THE WORSE CASE POWER SETTING PARAMETER ..............................................10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................11 5.7. THE WORSE CASE CONFIGURATIONS ..................................................................11 5.8. TEST ENVIRONMENT ...............................................................................................12 5.9. DESCRIPTION OF TEST SETUP ...............................................................................13 5.10. MEASURING INSTRUMENT AND SOFTWARE USED ..........................................15 6.MEASUREMENT METHODS ............................................................................................16 7.ANTENNA PORT TEST RESULTS ...................................................................................17 7.1. ON TIME AND DUTY CYCLE .....................................................................................17 7.2. 6 dB BANDWIDTH ......................................................................................................20 7.3. CONDUCTED OUTPUT POWER ...............................................................................28 7.4. POWER SPECTRAL DENSITY ..................................................................................30 7.5. CONDUCTED BANDEDGE AND SPURIOUS EMISSIONS ........................................38 7.6. RADIATED TEST RESULTS ......................................................................................68 7.6.1. LIMITS AND PROCEDURE .................................................................................68 7.6.2. TEST ENVIRONMENT ........................................................................................74 7.6.3. RESTRICTED BANDEDGE .................................................................................74 7.6.4. SPURIOUS EMISSIONS .....................................................................................91 8.AC POWER LINE CONDUCTED EMISSIONS ................................................................ 147 9.ANTENNA REQUIREMENTS .......................................................................................... 152 REPORT No.: 4789708079-1 Page 4 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Zhejiang Dahua Vision Technology Co., Ltd. Address: No.1199, Bin’an road, Binjiang District, Hangzhou, P.R.China. Manufacturer Information Company Name: Zhejiang Dahua Vision Technology Co., Ltd. Address: No.1199, Bin’an road, Binjiang District, Hangzhou, P.R.China. EUT Description Product Name Face Recognition Access Controller Model Name DHI-ASI7213X-V1-T1 Additional No. DH-ASI7213X-V1-T1, ASI7213X-V1-T1, DHI-ASI7213X-T1, DH-ASI7213X-T1, ASI7213X-T1, DHI-ASI7213X, DH-ASI7213X, ASI7213X, K1X Sample Number 3473457 Data of Receipt Sample Dec. 10, 2020 Date Tested Dec. 10, 2020 ~ Feb. 20, 2021 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C PASS REPORT No.: 4789708079-1 Page 5 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED.…

Text truncated - open the document above for the full version.

REPORT No.: 4789708079-1 Page 51 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot LCH SPURIOUS EMISSION_30MHz~10GHz LCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 52 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11G MCH PASS Pref test Plot MCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 53 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot MCH SPURIOUS EMISSION_30MHz~10GHz MCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 54 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11G HCH PASS Pref test Plot HCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 55 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot HCH SPURIOUS EMISSION_30MHz~10GHz HCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 56 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11N HT20 LCH PASS Pref test Plot LCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 57 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot LCH SPURIOUS EMISSION_30MHz~10GHz LCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 58 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11N HT20 MCH PASS Pref test Plot MCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 59 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot MCH SPURIOUS EMISSION_30MHz~10GHz MCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 60 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11N HT20 HCH PASS Pref test Plot HCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 61 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot HCH SPURIOUS EMISSION_30MHz~10GHz HCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 62 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11N HT40 LCH PASS Pref test Plot LCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 63 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot LCH SPURIOUS EMISSION_30MHz~10GHz LCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 64 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11N HT40 MCH PASS Pref test Plot MCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 65 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Puw test Plot MCH SPURIOUS EMISSION_30MHz~10GHz MCH SPURIOUS EMISSION_10GHz~26GHz REPORT No.: 4789708079-1 Page 66 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Channel Verdict 11N HT40 HCH PASS Pref test Plot HCH SPURIOUS EMISSION REPORT No.: 4789708079-1 Page 67 of 152 UL-CCIC COMPANY LIMITED This report shall not be reproduced …

Text truncated - open the document above for the full version.