SVNDH-IPC-A22E-S2CONSUMER CAMERA

IPC-A22EP-S2 Network Camera Quick Start Guide V1.0.0 Error! Use the Home tab to apply 标题 1 to the text that you want to appear h ere. I Foreword General This manual introduces the functions and operations of the camera. Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides additional information as the emphasis and supplement to the text. Revision History Version Revision Content Release Date V1.0.0 First release August 2019 About the Manual ⚫ The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail. ⚫ We are not liable for any loss caused by the operations that do not comply with the manual. ⚫ The manual would be updated according to the latest laws and regulations of related regions. For detailed information, see the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail. ⚫ All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation. ⚫ There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, please refer to our final explanation. ⚫ Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened. ⚫ All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners. Error! Use the Home tab to apply 标题 1 to the text that you want to appear h ere. II ⚫ Please visit our website, contact the supplier or customer service if there is any problem occurred when using the device. ⚫ If there is any uncertainty or controversy, please refer to our final explanation. Table of Contents III Table of Contents Foreword .................................................................................................................................................... I 1 Packing List ........................................................................................................................................... 1 2 Product Introduction ............................................................................................................................. 2 3 Imou App Operation .............................................................................................................................. 4 4 Installing Device .................................................................................................................................... 5 Error! Use the Home tab to apply 标题 1 to the text that you want to appear h ere. 1 1 Packing List ⚫ Please open the package and check if all the components are included before installation. ⚫ Contact your local retailer if anything is broken in your package. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 2 2 Product Introduction For the introduction of the device, see Figure 2-1 and Figure 2-2. Press and hold the reset button for 10 s to reset the device. The pattern of the LED indicator is included in Table 2-1. Table 2-1 LED indicator pattern LED Indicator Status Device Status Off Powered off/LED turned off Rebooting after reset Red light on Booting Device malfunction Red light flashing Waiting for network Green light on Operating properly Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 3 LED Indicator Status Device Status Red light flashing Network connection failed Green and red light flashing alternately Firmware updating Error! Use the Home tab to apply 标题 1 to the text that you want to appear h ere. 4 3 Imou App Operation Follow the steps below to add the camera in the network with Imou App. Scan the following QR code or search "Imou" in Google Play or App Store to download and install Imou App. If you have installed the App, update it to the latest version. Run Imou App, and then register an account for first use. Connect the camera to power source with the power adapter. Wait for booting to be finished, and then the camera indicator flashes with green light. Connect your smart phone to your Wi-Fi network, and make sure your smartphone is connected to Wi-Fi network with 2.4 GHz band, and then do the following operations to finish adding camera. ⚫ If you have more than one device, do step 5 to add them one by one. ⚫ If the Wi-Fi network has changed or the indicator status goes wrong, reset the camera, and then do step 5 to add it again. Error! Use the Home tab to apply 标题 1 to the text that you want to appear h ere. 5 4 Installing Device Make sure the mounting surface is strong enough to hold at least three times of the camera weight. For the installation diagram and item list of the camera, see Figure 4-1. Installation diagram Drill screw holes on the mounting surface as the mounting map shows, and then put in the expansion bolts. Attach the mounting plate to the mounting surface with the self-tapping screws. Attach the camera to the mounting plate, then power it up, and then, adjust the lens to the ideal angle.

Zhejiang Dahua Vision Technology Co., Ltd Date: 2019-10-10 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SVNDH-IPC-A22E-S2 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Zhejiang Dahua Vision Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Yolanda.chen Title: Senior Certification engineer Signature: On behalf of Company: Zhejiang Dahua Vision Technology Co., Ltd. Telephone: 0571-28822025

Zhejiang Dahua Vision Technology Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Zhejiang Dahua Vision Technology Co., Ltd No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Hangzhou, 310052, China Regarding: Confidentiality Request regarding application for FCC ID : SVNDH-IPC-A22E-S2 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code) Yolanda.chen Title: Senior Certification engineer Company Name: Zhejiang Dahua Vision Technology Co., Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 6 Page 1 of 6 External Photos Applicant: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address of Applicant: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Equipment Under Test (EUT): Product Name: CONSUMER CAMERA Model No.: IPC-A22EP-S2 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 6 Page 2 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 6 Page 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 6 Page 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 6 Page 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 6 Page 6 of 6 End

Label location FCC STATEMENT

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 7 Page 1 of 7 Internal Photos Applicant: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address of Applicant: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Equipment Under Test (EUT): Product Name: CONSUMER CAMERA Model No.: IPC-A22EP-S2 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 7 Page 2 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 7 Page 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 7 Page 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 7 Page 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 7 Page 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 7 of 7 Page 7 of 7 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738302 Page: 1 of 7 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF Exposure Evaluation Report Application No.: SHEM1909017383CR FCC ID: SVNDH-IPC-A22E-S2 Applicant: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address of Applicant: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Manufacturer: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address of Manufacturer: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Equipment Under Test (EUT): EUT Name: CONSUMER CAMERA Model No.: IPC-A22EP-S2 Add Model No.: IPC-A22EN-S2, A22E Standard(s) : FCC Rules 47 CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2019-09-23 Date of Test: 2019-09-25 to 2019-10-08 Date of Issue: 2019-10-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738302 Page: 2 of 7 Revision Record Version Description Date Remark 00 Original 2019-10-09 / Authorized for issue by: Vincent Zhu /Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738302 Page: 3 of 7 2 Contents Page 1 COVER PAGE ................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 3 3 GENERAL INFORMATION ........................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 4 3.2 TEST LOCATION ....................................................................................................................................... 5 3.3 TEST FACILITY ......................................................................................................................................... 5 4 TEST STANDARDS AND LIMITS ............................................................................................................... 6 4.1 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS: ......................................................................... 6 5 MEASUREMENT AND CALCULATION ..................................................................................................... 6 5.1 MAXIMUM TRANSMIT POWER ................................................................................................................... 6 5.2 MPE CALCULATION ................................................................................................................................. 7 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738302 Page: 4 of 7 3 General Information 3.1 General Description of E.U.T. Power supply: DC 5V by adapter Adapter: Model:E010-1D050150VUU Input:100-240V~50/60Hz 0.3A Output:5V 1.5A Test voltage: AC 120V 60Hz Cable: DC Cable 2m with USB port Antenna Gain 2.84dBi Antenna Type Integral Antenna Channel Spacing 5MHz Modulation Type 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels 802.11b/g/n(HT20):11 802.11n(HT40):7 Operation Frequency 802.11b/g/n(HT20): 2412MHz to 2462MHz 802.11n(HT40): 2422MHz to 2452MHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738302 Page: 5 of 7 3.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • NVLAP (Certificate No. 201034-0) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the National Voluntary Laboratory Accreditation Program(NVLAP). Certificate No. 201034-0. • FCC –Designation Number: CN5033 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. Designation Number: CN5033. Test Firm Registration Number: 479755. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by ISED as an accredited testing laboratory. IC Registration No.: 8617A-1. CAB Identifier: CN0020. • VCCI (Member No.: 3061) The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-13868, C-14336, T-12221, G-10830 respectively. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738302 Page: 6 of 7 4 Test Standard…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738301 Page: 1 of 113 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. TEST REPORT Application No.: SHEM1909017383CR FCC ID: SVNDH-IPC-A22E-S2 Applicant: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address of Applicant: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Manufacturer: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address of Manufacturer: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Equipment Under Test (EUT): EUT Name: CONSUMER CAMERA Model No.: IPC-A22EP-S2, IPC-A22EN-S2, A22E; ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2019-09-23 Date of Test: 2019-09-25 to 2019-10-08 Date of Issue: 2019-10-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738301 Page: 2 of 113 Revision Record Version Description Date Remark 00 Original 2019-10-09 / Authorized for issue by: Vincent Zhu / Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738301 Page: 3 of 113 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(c) Customer Declaration Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Average Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.209 & 15.247(d) Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.209 & 15.247(d) Pass Note: Declaration of EUT Family Grouping: There are series models mentioned in this report and they are the similar in electrical and electronic characters. Only the model IPC-A22EP-S2 was tested since their differences are model number, trade name and appearance. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190901738301 Page: 4 of 113 3 Contents Page 1 COVER PAGE ............................................................................................................................................. 1 2 TEST SUMMARY ......................................................................................................................................... 3 3 CONTENTS .................................................................................................................................................. 4 4 GENERAL INFORMATION ......................................................................................................................... 5 4.1 DETAILS OF E.U.T. ................................................................................................................................ 5 4.2 DESCRIPTION OF SUPPORT UNITS........................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ................................................................................................................ 6 4.4 TEST LOCATION ..................................................................................................................................... 7 4.5 TEST FACILITY ....................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ................................................................................................................ 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 7 5 EQUIPMENT LIST ....................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ................................................................................... 9 6.1 ANTENNA REQUIREMENT ........................................................................................................................ 9 7 RADIO SPECTRUM MATTER TEST RESULTS ...................................................................................... 10 7.1 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ)…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 5 Page 1 of 5 Test Setup Photos-FCC Applicant: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address of Applicant: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Equipment Under Test (EUT): Product Name: CONSUMER CAMERA Model No.: IPC-A22EP-S2 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 5 Page 2 of 5 1 Contents Page 1 CONTENTS............................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES ............................................................. 3 2.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup ......... 3 2.2 RF Conducted Test Setup ................................................................................. 3 2.3 Spurious emissions ........................................................................................... 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 5 Page 3 of 5 2 EQUIPMENT UNDER TEST PICTURES 2.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup 2.2 RF Conducted Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 5 Page 4 of 5 2.3 Spurious emissions 30MHz-1GHz Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 5 Page 5 of 5 Zoom: End