SVNDH-IPC-HDW1X3IP camera

Eyeball Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0 Quick Start Guide I Foreword General This manual introduces the installation and operations of network camera. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides additional information as a supplement to the text. Revision History Version Revision Content Release Date V1.0.0 First release. May 2022 Privacy Protection Notice As the device user or data controller, you might collect the personal data of others such as their face, fingerprints, and license plate number. You need to be in compliance with your local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures which include but are not limited: Providing clear and visible identification to inform people of the existence of the surveillance area and provide required contact information. About the Manual ● The manual is for reference only. Slight differences might be found between the manual and the product. ● We are not liable for losses incurred due to operating of the product in ways that are not in compliance with the manual. ● The manual will be updated according to the latest laws and regulations of related jurisdictions. For detailed information, see the paper User Manual, use our CD-ROM, scan the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version. ● All the designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. ● There might be deviations in the description of the technical data, functions and operations, or errors in the print. If there is any doubt or dispute, we reserve the right of final explanation. Quick Start Guide II ● Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened. ● All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners. ● Please visit our website, contact the supplier or customer service if any problems occur while using the device. ● If there is any uncertainty or controversy, we reserve the right of final explanation. Quick Start Guide III Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it. Transportation Requirements ● Transport the device under allowed humidity and temperature conditions. ● Pack the device with packaging provided by its manufacturer or packaging of the same quality before transporting it. ● Do not place heavy stress on the device, violently vibrate or immerse it in liquid during transportation. Storage Requirements ● Store the device under allowed humidity and temperature conditions. ● Do not place the device in a humid, dusty, extremely hot or cold site that has strong electromagnetic radiation or unstable illumination. ● Do not place heavy stress on the device, violently vibrate or immerse it in liquid during storage. Installation Requirements ● Strictly comply with the local electrical safety codes and standards, and check whether the power supply is correct before operating the device. ● Please follow the electrical requirements to power the device. ◇ When selecting the power adapter, the power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no higher than PS2. Please note that the power supply requirements are subject to the device label. ◇ We recommend using the power adapter provided with the device. ● Do not connect the device to two or more kinds of power supplies, unless otherwise specified, to avoid damage to the device. ● The device must be installed in a location that only professionals can access, to avoid the risk of non-professionals becoming injured from accessing the area while the device is working. Professionals must have full knowledge of the safeguards and warnings of using the device. ● Do not place heavy stress on the device, violently vibrate or immerse it in liquid during installation. ● An emergency disconnect device must be installed during installation and wiring at a readily accessible location for emergency power cut-off. ● We recommend you use the device with a lightning protection device for stronger protection Quick Start Guide IV against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations. ● Ground the function earthing portion of the device to improve its reliability (certain models are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that the power supply of the device is connected to a power socket with protective earthing. ● The dome cover is an optical component. Do not directly touch or wipe the surface of the cover during installation. Operation Requirements ● The cover must not be opened while the device is powered on. ● Do not touch the heat dissipation component of the device to avoid the risk of getting burnt. ● Use the device under allowed humidity and temperature conditions. ● Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it, to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering. ●…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Zhejiang Dahua Vision Technology Co., Ltd Address No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Grantee Code SVN FCC ID SVNDH-IPC-HDW1X3 Authorized Contact Name Yolanda chen Contact Email [email protected] Contact Phone 0571-28822025 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2022-06-22 Print Name: Yolanda chen Title: Senior Certification engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Current Date : 2022-06-22 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.) HEREBY DECLARED THAT Product Description IP camera Model No. IPC-HDW1230DT-SAW; DH-IPC-HDW1230DT-SAW ; IPC-HDW1230DT-SAW-0280B;DH-IPC-HDW1230DT-SAW-0280B;IPC-HD W1230DT-SAW-0360B;DH-IPC-HDW1230DT-SAW-0360B;DH-IPC-HDW1 2B0DT-SAW;IPC-HDW12B0DT-SAW;IPC-HDW1430DT-SAW; IPC-HDW1430DT-SAW-0280B;DH-IPC-HDW1430DT-SAW-0280B;IPC-HD W1430DT-SAW-0360B;DH-IPC-HDW1430DT-SAW-0360B;DH-IPC-HDW1 4B0DT-SAW;IPC-HDW14B0DT-SAW Manufacturer’s Name ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Manufacturer’s Address No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China *Except that the model number, trade name,Color and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No. (型号): DH-IPC-HDW1430DT-SAW Manufacturer’s Name (生产商名称): ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Manufacturer’s Address（生产商商地址): No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Sincerely, Signature (签字): Printed Name (姓名): Yolanda.chen Position/Title (职位): Senior Certification engineer Contact Number (联系电话): 0571-28822025

ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Date: 2022-06-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SVNDH-IPC-HDW1X3 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. This authorization is valid until further written notice from the applicant. Name (Printed): Yolanda chen Title: Certificate Engineer Signature: On behalf of Company: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Telephone: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R.China

ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R.China Regarding: Confidentiality Request regarding application for FCC ID: SVNDH-IPC-HDW1X3 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Yolanda chen Title: Certificate Engineer Company Name: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD..

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 5 External Photos for FYCR2204000127AT Test Model: DH-IPC-HDW1430DT-SAW Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 5 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 5 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 4 of 5 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 5 of 5

Remark:It’s hard to put FCC statement on the product due to device’s irregular appearance. FCC statement will be placed in the user manual which the device is marketed. Label Location

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 7 Internal Photos for FYCR2204000127AT Test Model: DH-IPC-HDW1430DT-SAW Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 7 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 4 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 5 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 6 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 7 of 7

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012703 Page: 1 of 10 Kidd Yang EMC Laboratory Manager 1 Cover Page RF Exposure Report Application No.: FYCR2204000127AT(KSCR2204000571AT) Applicant: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD Address of Applicant: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R.China Manufacturer: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD Address of Manufacturer: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R.China Equipment Under Test (EUT): EUT Name: IP camera Model No.: IPC-HDW1230DT-SAW;DH-IPC-HDW1230DT-SAW;IPC-HDW1230DT- SAW-0280B;DH-IPC-HDW1230DT-SAW-0280B;IPC-HDW1230DT-SAW- 0360B;DH-IPC-HDW1230DT-SAW-0360B;DH-IPC-HDW12B0DT- SAW;IPC-HDW12B0DT-SAW;IPC-HDW1430DT-SAW;DH-IPC- HDW1430DT-SAW;IPC-HDW1430DT-SAW-0280B;DH-IPC-HDW1430DT- SAW-0280B;IPC-HDW1430DT-SAW-0360B;DH-IPC-HDW1430DT-SAW- 0360B;DH-IPC-HDW14B0DT-SAW;IPC-HDW14B0DT-SAW   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: SVNDH-IPC-HDW1X3 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-04-28 Date of Test: 2022-05-13 to 2022-06-02 Date of Issue: 2022-06-07 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012703 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2022-06-07 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012703 Page: 3 of 10 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 SEPARATION DISTANCE ................................................................................................................ 4 3.4 TEST LOCATION ............................................................................................................................ 5 3.5 TEST FACILITY .............................................................................................................................. 5 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 6 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 6 4.2 MPE-BASED EXEMPTION .............................................................................................................. 6 4.3 SAR-BASED EXEMPTION ............................................................................................................... 7 5 MEASUREMENT AND CALCULATION .......................................................................................... 10 5.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 10 5.2 RF EXPOSURE CALCULATION ...................................................................................................... 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012703 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Input Power:12V/0.5A Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz; 802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK), 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Channel Spacing: 5MHz Number of Channels: 802.11b/g/n(HT20): 11, 802.11n(HT40):7 Antenna Type: Antenna 1: Integral Antenna Antenna 2: Integral Antenna Antenna Gain: Antenna1: 2.8dBi (Provided by the manufacturer) Antenna2: 2.8dBi (Provided by the manufacturer) Directional Gain: 5.8dBi (Provided by the manufacturer) 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012703 Page: 5 of 10 3.4 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6606.01) Compliance Certification Services（Kunshan）Inc. Shenzhen branch is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6606.01. • FCC –Designation Number: CN1322 Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized as an accredited testing laboratory. Designation Number: CN1322. Test Firm Registration Number: 718073 • Innovation, Science and Economic Development Canada Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognize…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012702 Page: 1 of 182 Kidd Yang EMC Laboratory Manager TEST REPORT Application No.: FYCR2204000127AT(KSCR2204000571AT) Applicant: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD Address of Applicant: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R.China Manufacturer: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD Address of Manufacturer: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R.China Equipment Under Test (EUT): EUT Name: IP camera Model No.: IPC-HDW1230DT-SAW;DH-IPC-HDW1230DT-SAW;IPC-HDW1230DT- SAW-0280B;DH-IPC-HDW1230DT-SAW-0280B;IPC-HDW1230DT-SAW- 0360B;DH-IPC-HDW1230DT-SAW-0360B;DH-IPC-HDW12B0DT-SAW;IPC- HDW12B0DT-SAW;IPC-HDW1430DT-SAW;DH-IPC-HDW1430DT- SAW;IPC-HDW1430DT-SAW-0280B;DH-IPC-HDW1430DT-SAW- 0280B;IPC-HDW1430DT-SAW-0360B;DH-IPC-HDW1430DT-SAW- 0360B;DH-IPC-HDW14B0DT-SAW;IPC-HDW14B0DT-SAW   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: SVNDH-IPC-HDW1X3 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-04-28 Date of Test: 2022-05-13 to 2022-06-02 Date of Issue: 2022-06-07 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012702 Page: 2 of 182 Revision Record Version Chapter Date Modifier Remark 01 2022-06-07 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012702 Page: 3 of 182 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Average Output Power ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Note: There are series models mentioned in this report, and they are the identical in electrical and electronic characters. Only the model DH-IPC-HDW1430DT-SAW was tested since their differences were the model number, trade name, color and appearance. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400012702 Page: 4 of 182 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 8 4.5 TEST FACILITY ...................................................................................................................................... 8 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 8 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 8 5 EQUIPMENT LIST ...................................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 14 6.1 ANTENNA REQUIREMENT .................................................................................................................... 14 6.1.1 Test Requirement: ....................................................................................................................... 14 6.1.2 Conclusion ................................................................................................................................... 14 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 15 7.1 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ........................................................... 15 7.1…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 3 Appendix Photographs of Test Setup for FYCR2204000127AT Test Model: DH-IPC-HDW1430DT-SAW Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 3 Test Setup Photos Conducted Emissions at AC Power Line (150kHz-30MHz) RF Conducted Test Setup Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 3 Radiated Spurious Emissions Below 1GHz Radiated Spurious Emissions Above 1GHz