TARCDU-680Dual Band CDMA 1xEVDO USB Modem

CDMA 1xEV-DO Release A USB Modem Technical Specifications (CDU-680) Version : 0.1 Date : Oct. 21, 2006 C-motech Co., Ltd. Proprietary and Confidential This document is the sole and exclusive property of C-motech. Not to be distributed or divul ged without prior written agreement. 5F., Etronix BLD., 17-10 Yoido-dong Youngdungpo-gu Seoul (150-874) Korea URL: http://www.cmotech.com CDU-680 Technical specification 2/18 Confidential This document is the sole and exclusive property of C-motech. Not to be distributed or divulged without prior written agreement. CDU-680 Technical Specifications All data and information contained in or disclosed by this document are confidential and proprietary information of C-motech Incorporated, and all rights therein are expressly reserved. By accepting this material, the recipient agrees that this material and the information contained therein are held in confidence and in trust and will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of C-motech Incorporated. This information provided in this document is provided on an “as is” basis. In no event will C-motech Incorporated be liable for any damages arising directly or indirectly from any use of information contained in this document. Information in this document is preliminary and subjected to change without any notice. Disclaimers Life support – This product is not designed for use in life support appliances or systems where malfunction of these products can reasonably be expected to result in personal injury. C-motech Co., Ltd. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify C-motech Co., Ltd. for any damages resulting from such application. Right to make change - C-motech Co., Ltd. reserves the right to make changes, without notice, in the products, including circuits and software, described or contained herein in order to improve design and/or performance. CDU-680 Technical specification 3/18 Confidential This document is the sole and exclusive property of C-motech. Not to be distributed or divulged without prior written agreement. Contact Information If you have any technical queries about this documentation, please contact: C-motech Co., Ltd. 5F Etronix BLD. 17-10 Yoido-Dong, Youngdungpo-Gu, Seoul 150-874 Korea Phone: +82 2 785 5540 Fax: +82 2 785 2369 Sales contact point: Email: [email protected] Technical contact point: Email: [email protected] (Hardware Team) Email: [email protected] (Software Team) CDU-680 Technical specification 4/18 Confidential This document is the sole and exclusive property of C-motech. Not to be distributed or divulged without prior written agreement. Revision History Level Date Description 0.1 Oct.21, 2006 Initial Release CDU-680 Technical specification 5/18 Confidential This document is the sole and exclusive property of C-motech. Not to be distributed or divulged without prior written agreement. Table of contents 1 Product Overview ···································································································· 6 1.1 Overview......................................................................................................... 6 1.2 General Features............................................................................................ 6 1.3 Functional block Diagram ............................................................................... 7 2 Specifications··········································································································· 8 2.1 Mechanical Specifications .............................................................................. 8 2.2 Environment Specifications .......................................................................... 10 2.3 Hardware Specifications ............................................................................... 10 2.4 CDMA RF performance ................................................................................ 11 2.5 Software Specifications ................................................................................ 13 3 Instruction ·············································································································· 14 3.1 Package contents ......................................................................................... 14 3.2 Optional Accessory Drawing......................................................................... 15 3.3 Getting start .................................................................................................. 16 3.3.1 System Requirements········································································· 16 3.3.2 Installing CDMA USB Modem software and Driver ····························· 17 CDU-680 Technical specification 6/18 Confidential This document is the sole and exclusive property of C-motech. Not to be distributed or divulged without prior written agreement. 1. Product Overview 1.1. Overview - Enjoy the freedom to get fast internet connection, anywhere, anytime. - Now possible anywhere you want to work or play. - Global wireless access to the internet, e-mail. - Powerful CDMA 1xEV-DO Release A network. - Compact, portable, manageable and state-of-the-art device. 1.2. General Features DATA SERVICES STANDARDS CDMA 1xEV-DOrA(IS-856-A) IS-856-A (CDMA 1xEV-DOrA) Downlink: up to 3.1Mbps, Up link: 1.8Mbps IS-2000 Rel.0 (CDMA 1xRTT) CDMA 1xRTT(IS-2000 Rel.0) Forward and reverse link: up to 153.6Kbps IS-707-A Data Service * Limit to Network conditions IS-683C OTA Service Provisioning GENERAL CHARACTERITICS IS-853-C Wireless IP Network Dimension/Weight: 32x78x9.5(mm)/25g IS-707 AT command Operating Temperature: -20°C to 50°C SYSTEM REQUIREEMNTS Qualcomm MSM6800 chipset based(ZIF) Windows® 2000/XP MRD(Mobile Receiver Diversity) Connection: USB slot A-Type Visual indicator LEDs Disk Drive: CD-ROM USB Series “A” Type plug…

Text truncated - open the document above for the full version.

04. DEC., 2006 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE WIRELESS MODEMS We hereby certify that the CDMA 1xEV-DOrA Data Modem (FCC ID: TARCDU-680) is so designed that it complies with all the requirements for ESN protection specified in Section 22.919 of the FCC Rules. a) The transmitter in service has a unique ESN. b) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software cannot be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and the ESN data programmed in the memory with other information. C) The ESN is factory-set and cannot be altered, transferred, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or changes the ESN chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative. Sincerely, Mr. Byung-Young Choi Senior Research Engineer C-motech Co., Ltd. 8,9F Youngsan Bldg. 14-14 Yoido-Dong, Youngdungpo-Gu, Seoul, Korea (150-871) Email: [email protected] URL: http://www.cmotech.com TEL:82-2-368-9881 FAX:82-2-785-5740

Tuesday, 2 January 2007 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037, USA To whom it may concern: We, the undersigned, hereby authorize SGS Testing Korea Co., Ltd. to act on our behalf i n all manners relating to application for equipment authorization, including signing of all do cuments relating to these matters. Any and all acts carried out by SGS Testing Korea Co. , Ltd. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). In authorizing SGS Testing Korea Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provisi on for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certificatio n has been granted; d) do not use our product certification in such a manner as to bring the Certification Div ision into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising mat ter that contains any reference thereto and return any certification documents as req uired by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misle ading manner; h) ensure that any reference to our product certification in communication media such a s documents, brochures or advertising, complies with the requirements of the Certifi cation Division; i) keep a record of all complaints made known to the us relating to the product’s compli ance with requirements of the relevant standard and to make these records availabl e to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mr. Byung-Young Choi Senior Research Engineer C-motech Co., Ltd. 8,9F Yongsan Bldg. 14-14 Yoido-dong, Youngdungpo-gu, Seoul 150-871 Korea Email: [email protected] URL: http://www.cmotech.com Tel. 82-2-368-9881 Fax. 82-2-785-5740

Federal Communications Commission January 2, 2007 Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Re: C-motech Co., Ltd. FCC ID: TARCDU-680 Subject : Request for Confidentiality To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.45 7, 0.459), we are requesting the Commission to withhold the following attachments as confi- dential document from public disclosure indefinitely. - Block diagram, Schematic diagram - Parts list, Theory of operation, antenna specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04- 1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2. 803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive informati on remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short- term confidentiality request on the following attachments for 45 days from the date of grant: - User manual, Regulatory info - External photos, Internal photos, Test setup photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Mr. Byung-Young Choi Senior Research Engineer C-motech Co., Ltd 8,9F Yongsan Bldg. 14-14 Yoido-dong, Youngdungpo-gu, Seoul 150-871 Korea Email: [email protected] URL: http://www.cmotech.com Tel. 82-2-368-9881 Fax. 82-2-785-5740

Mike Kuo From: Kwon, James (Gunpo) [[email protected]] Sent: Thursday, January 11, 2007 6:23 AM To: Mike Kuo Cc: Jeong, Feel (Gunpo); Ham, Denny (Gunpo); Ko, Duke (Gunpo); Ryu, Erwin (Gunpo) Subject: FW: C-motech Co., Ltd., FCC ID: TARCDU-680, Assessment NO.: AN07T6434, Notice#1 1/11/2007 Hi Mike, Pls find our reply at below. James/SGS-Korea From: Mike Kuo [mailto:[email protected]] Sent: Thursday, January 11, 2007 10:13 AM To: Kwon, James (Gunpo) Subject: FW: C-motech Co., Ltd., FCC ID: TARCDU-680, Assessment NO.: AN07T6434, Notice#1 Hi James: I have done the technical review with the following questions. Additional questions may be asked based upon the replies. M.Kuo Question #1: Antenna specificaiton can be requested for long term confidential document but can not be request for short term confidential document. Please revised the request for confidentiality letter with the following changes: In long term section, list Block Diagram, Schematic Diagram, Parts list, theory of operation and Antenna specification. In short term section, list user manual, regulatory info, external photos, internal photos and test setup photos. Once you done so, please submit the revised request letter. [James] I revised request letter, and uploaded it. Question #2: In the regulatory info document, it states " FCC guidelines stipulate that the antenna should be more than 1.5cm (0.6") from all persons. " Please delete this statement. The separation distance is the result from the evaluation. FCC does not provide guideline for separation distance for specific device. "..The design of this phone complies with .." please change " phone " to " device". "This device has been tested for FCC RF exposure hand and body SAR compliance for CDU-680 CDMA modem user. " please change above statement to the following: " This device has been tested for FCC RF exposure body SAR compliance with typical laptop computer(s) for CDU-680 CDMA Modem user". [James] I revised regulatory info document, and uploaded it. Question #3: Section 1.6 of RF test report, please change 15.209 to 15.109; 15.207 to 15.107. 15.209 and 15.207 are applicable to unlicnesed transmitter which is not the case for this application. [James] All number of test report was revised, and updated test report was uploaded. Please go over the test report to replace 15.207 with 15.107; replace 15.209 with 15.109. Question #4: Section 5.3 of RF test report: this is 15.109 tests but the heading in in the limit stated as AVE ( average ). For 15.109 emisison tests, frequencies below 1 GHz is QP limit. Please make necessary correction. [James] Page 22 of test report was revised. Question #5:Section 3.3 of RF test report: please inform which RC/SO or 1xEVDO Rev 0 or Rev. A configuraiton was used during the ERP/EIRP measurement. [James] Comment was updated exactly on page 13 of test report. Question #6:Based upon theroy of operation, this CDMA data modem has the following radio capabilities : MS protocol Rev. 6 / IS-2000 1xEVDO Rev. 0 1xEVDO Rev. A In section 6 of RF test report, preliminary tests were performed with various RC/SO configuraiton. However, these AVE/PK output power measurement were only applicable to 1xRTT. There is no information on the investigation of 1xEVDO Rev.0 and Rev.A. Please provide output power investigation on 1xEVDO Rev. 0 and 1xEVDO Rev. A [James] We missed it. Comment was updated exactly on page 27-28 of test report. Rev. 0 Rev. A Cellular Band - RTAP Cellular Band - FTAP Channel f (MHz) RTAP Rate Conducted power (dBm) Channelf (MHz) FTAP Rate Conducted power (dBm) Average Peak AveragePeak 1013 824.70 153.6 1013824.70 307.2 kbps (2 slot, QPSK) 384 836.52 384836.52 777 848.31 777848.31 PCS Band - RTAP PCS Band - FTAP Channel f (MHz) RTAP Rate Conducted power (dBm) Channelf (MHz) FTAP Rate Conducted power (dBm) Average Peak AveragePeak 25 1851.25 153.6 251851.25 307.2 kbps (2 slot, QPSK) 600 1880.00 6001880.00 1175 1908.75 11751908.75 Cellular Band - RETAP Cellular Band - FETAP Channel f (MHz) R-Data Pkt Size Conducted power (dBm) Channelf (MHz) FTAP Rate Conducted power (dBm) Average Peak AveragePeak 384 836.52 128 384836.52307.2 (2 slot) 256 307.2 (4 slot) 512 768 1024 1536 2048 3072 4096 6144 8192 12288 PCS Band - RETAP PCS Band - FETAP Conducted power Conducted power 1/11/2007 Question #7: Necessary Bandwidht shall be based upon 99% Bandwidth measurement ( not 26dB Bandwidth). Please update the test report with correct emission designator [James] Acknowledged well. We updated page 3 of test report. Question #8: Please explain why RC3/SO 32(+F-SCH) was not investigated. What is mean the RC/SO is only applicable to Lab applications? [James] Acknowledged well. We investigated RC3/SO 32(+F- SCH). Referring to Theory of operation, we updated page 25 of test report clearer. [James] Test report page is changed. So I uploaded related material again. Additional Technical questions may be asked based upon replies to above questions. Best Regards Mike Kuo The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Channel f (MHz) R-Data Pkt Size (dBm) Channelf (MHz) FTAP Rate (dBm) Average Peak AveragePeak 600 1880.00 128 6001880307.2 (2 slot) 256 307.2 (4 slot) 512 768 1024 1536 2048 3072 4096 6144 8192 12288 Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Fin…

Text truncated - open the document above for the full version.

FCC ID : TARCDU-680 Report File No. : STROR-07-005 Page : 50 of 53 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Appendix D. Photos of the EUT Front View of Product Rear View of Product

FCC ID LABEL 1. FCC ID label drawing C-motech Co., Ltd. Model : CDU-680 Dual Band CDMA 1xEV-DO USB Modem FCC ID : TARCDU-680 ESN: 3BXXXXXX[HEX] S/N: XXXXXXXXXX Made in Korea 2. FCC ID label location - Bottom side of device

FCC ID : TARCDU-680 Report File No. : STROR-07-005 Page : 51 of 53 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Inside View of Product Top View of Main Board FCC ID : TARCDU-680 Report File No. : STROR-07-005 Page : 52 of 53 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Top View of Main Board (Removed shield cap) Bottom View of Main Board FCC ID : TARCDU-680 Report File No. : STROR-07-005 Page : 53 of 53 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Bottom View of Main Board (Removed shield cap)

Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 1 / 90 SAR TEST REPORT Equipment Under Test : Dual Band CDMA 1xEVDO USB Modem Model No. : CDU-680 Applicant : C-motech Co., Ltd. Address of Applicant : 8,9F Yongsan Bldg. 14-14 Yoido-dong Youngdungpo-gu, Seoul 150-871, Korea FCC ID TARCDU-680 Exposure Category : General Population/Uncontrolled Exposure Date of Receipt : 2006-12-26 Date of Test(s) : 2007-01-08 ~ 2007-01-09 Date of Issue : 2007-01-10 Standards: FCC OET Bulletin 65 supplement C IEEE 1528, 2003 ANSI/IEEE C95.1, C95.3 In the configuration tested, the EUT complied with the standards specified above. Remarks: Tested by : Leo Kim 2007-01-10 Approved by : Albert Lim 2007-01-10 This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Testing Korea Co., Ltd. or testing done by SGS Testing Korea Co., Ltd. in connection with distribution or use of the product described in this report must be approved by SGS Testing Korea Co., Ltd. in writing. Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 2 / 90 Contents 1. General Information 1.1 Testing Laboratory........................................................................................... 3 1.2 Details of Applicant.......................................................................................... 3 1.3 Version of Report............................................................................................. 3 1.4 Description of EUT(s)....................................................................................... 3 1.5 Test Environment............................................................................................. 4 1.6 Operation description........................................................................................ 4 1.7 Evaluation procedures....................................................................................... 4 1.8 The SAR Measurement System............................................................................ 5 1.9 System Components.......................................................................................... 7 1.10 SAR System Verification.................................................................................... 8 1.11 Tissue Simulant Fluid for the Frequency Band.......................................................... 10 1.12 Test Standards and Limits.................................................................................. 11 2. Instruments List.................................................................................... 13 3. Summary of Results................................................................................ 14 APPENDIX A. Photographs of EUT & EUT’s Test Setup B. DASY4 SAR Report C. Uncertainty Analysis D. Calibration certificate Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 3 / 90 1. General Information 1.1 Testing Laboratory SGS Testing Korea Co., Ltd. Wireless Div. 2FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 Telephone : +82 +31 428 5700 FAX : +82 +31 427 2371 Homepage : www.electrolab.kr.sgs.com 1.2 Details of Manufacturer Manufacturer : C-motech Co., Ltd. Address : 8,9F Yongsan Bldg. 14-14 Yoido- dong, Youngdungpo-gu, Seoul 150-871, Korea Contact Person : Bahn Gil-Sung Phone No. : +82-2-368-9881 Fax No. : +82-2-785-5740 1.3 Version of Report Version Number Date Revision 00 2007-01-10 Initial issue 1.4 Description of EUT(s) EUT Type : Dual Band CDMA 1xEV-DO USB Modem Model : CDU-680 Serial Number : #3 Hardware Version : 0.3 Software Version : CDU68SPR05 Mode of Operation : CDMA Dual Band Mobile Phone capabilities : CDMA 1xRTT, 1xEV-DO Duty Cycle : 100% Body worn Accessory : None Tx Frequency Range : CDMA Cellular : 824.7 ~ 848.31 MHz CDMA PCS : 1851.25 ~ 1908.75 MHz Antenna : Chip Antenna, model CD371B1 Power Supply : DC 5V from USB of Host Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 4 / 90 1.5 Test Environment Ambient temperature : 22.2 ° C Tissue Simulating Liquid : 22.2 ° C Relative Humidity : 58 % 1.6 Operation Configuration The device was controlled by using a Communication tester(5515C). Communication between the device and the tester was established by air link. Measurements were performed at the lowest, middle and highest channels of the operating band. The EUT was set to maximum power level during all tests and at the beginning of each test. The power of EUT was supplied by Host PC USB. The DASY4 system measures power drift during SAR testing by comparing e-field in the same location at the beginning and at the end of measurement. 1.7 EVALUATION PROCEDURES - Power Reference Measurement Procedures The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under test in the batch process. The Minimum distance of probe sensors to surface determines the closest measurement point to phantom surface. The minimum distance of probe sensors to surface is 4 mm. This distance cannot be smaller than the Distance of sensor calibration points to probe tip as defined in the probe properties (for example, 2.7 mm for an ET3DV6 probe type). - The entire evaluation of the spatial peak values is performed within the Post-processing engine (SEMCAD). The system always gives the maximum values for the 1 g and 10 g cubes. The algorithm to find the cube with highest averaged SAR is divided into the following stages: 1. The extraction of the measured data (grid and values) from the Zoom …

Text truncated - open the document above for the full version.

Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 27 / 90 Appendix B Test Plot - DASY4 Report Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 28 / 90 835 MHz Validation Test Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 29 / 90 1900 MHz Validation Test Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 30 / 90 CDMA Cellular SAR Test Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 31 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 32 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 33 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 34 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 35 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 36 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 37 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 38 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 39 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 40 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 41 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 42 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 43 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 44 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 45 / 90 CDMA PCS SAR Test Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 46 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 47 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 48 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 49 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 50 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 51 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 52 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 53 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 54 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 55 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 56 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 57 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 58 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 59 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 60 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 61 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 62 / 90 Appendix C Uncertainty Analysis Uncertainty of SAR equipments for measurement Uncertainty of measurements Uncertainty of SAR system

Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 63 / 90 Appendix D Calibration Certificate - PROBE - DAE - 835 MHz, 1900 MHz Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 64 / 90 - PROBE Calibration Certificate Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 65 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 66 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 67 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 68 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 69 / 90 Report File No. : STROS-07-002 Date of Issue : 2007-01-10 Page : 70 / 90 Report File No. : STROS-07-0…

Text truncated - open the document above for the full version.