TAT-GP-RWTInfrared triggered part 15 transmitter

ARS Active RFID Systems, Inc RFID System Evaluation Kit Instruction Manual Version 103105 The information contained in this document is the sole property of Active RFID Systems, Inc. and cannot be disclosed to third parties without our expressed written permission. It is provided for your use in conjunction with the Active RFID Systems supplied RFID system only. ARS - Active RFID Systems, Inc. Active RFID Systems - Evaluation Kit Instruction Manual - Version 103105 Page 2 of 35 Contents 1. RFID EVALUATION KIT DESCRIPTION ...................................................................................................... 4 1 1 . . 1 1 . . EVALUATION KIT COMPONENTS................................................................................................................. 4 1 1 . . 2 2 . . EVALUATION KIT FUNCTIONAL DESCRIPTION.............................................................................................. 5 1 1 . . 3 3 . . EZ READER SOFTWARE........................................................................................................................... 6 1 1 . . 4 4 . . ACTIVE TAGS........................................................................................................................................... 6 1 1 . . 5 5 . . EASY-TRAK TRIGGER...............................................................................................................................6 1 1 . . 6 6 . . EASY-TRAK READER................................................................................................................................6 1 1 . . 7 7 . . ANTI-COLLISION TAGS EXPLAINED............................................................................................................ 6 2. SYSTEM REQUIREMENTS ........................................................................................................................... 6 3. INSTALLATION AND CONFIGURATION INSTRUCTIONS......................................................................... 7 3 3 . . 1 1 . . HARDWARE INSTALLATION........................................................................................................................ 7 3.1.1. Connecting the Easy-Trak Reader to the PC .................................................................................... 7 3.1.2. Connecting the Easy-Trak Trigger to the PC .................................................................................... 7 3 3 . . 2 2 . . SOFTWARE INSTALLATION AND CONFIGURATION........................................................................................ 8 3.2.1. Installing the .NET Framework on the PC .........................................................................................8 3.2.2. Configuring the Network Connection................................................................................................. 8 3.2.3. Determining Which Serial Port is Being Used ................................................................................... 9 3.2.4. Installing the EZ Reader Software on the PC.................................................................................. 10 3.2.5. Configuring the EZ Reader Software Settings ................................................................................ 11 3.2.5.1. Configuring the Serial Port for the Trigger ............................................................................................. 11 3.2.5.2. Configuring the IP Address for the Reader Used as a Trigger.............................................................. 12 3.2.6. Loading the Optional Tag Memory Map .......................................................................................... 13 4. USING THE EVALUATION KIT................................................................................................................... 14 4 4 . . 1 1 . . EVALUATION KIT CONFIGURATIONS......................................................................................................... 15 4.1.1. Example. Functionality of One System Configuration .................................................................... 16 4.1.2. Easy-Trak Trigger Handheld Modes................................................................................................16 4.1.2.1. Mode 1 - Last Command Memory Mode. ..............................................................................................17 4.1.2.2. Mode 2 - Low Power Singe Tag Mode .................................................................................................. 17 4.1.2.3. Mode 4 - 24 Tag Anti-Collision Mode .................................................................................................... 17 4.1.2.4. Mode 5 - Beacon On ............................................................................................................................. 17 4.1.2.5. Mode 6 - Beacon Off ............................................................................................................................. 18 4.1.3. Changing the Easy Trak Trigger Modes.......................................................................................... 18 4 4 . . 2 2 . . EXAMPLES. RUNNING THE EVALUATION KIT............................................................................................ 18 4.2.1. Reading Data From Tags ................................................................................................................ 18 4.2.1.1. Easy-Trak Trigger Used as Serial Device - Tags Respond with RF to Reader .....................................18 4.2.1.2. Easy-Trak Trigger Used as a Handheld Device - Tags Respond with RF to Reader............................ 18 4.2.1.3. Easy-Trak Trigger Used as a Serial Device - Tags Respond with IR to Trigger .................................... 19 4.2.2. Writing Data to Tags ........................................................................................................................ 19 4.2.2.1. Easy-Trak Trigger Us…

Text truncated - open the document above for the full version.

Document: 900-0001-01 Revision: 1.0 www.active-rfid.com Document: 900-0001-01 Revision: 1.0 Oct 19, 2005 To whom it may concern: Active RFID Systems Inc, hereby authorizes CKC Certification Services, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CKC Certification Services, on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Active RFID Systems Inc. Sincerely, Joe Desimone Partner, Treasurer & CTO Active RFID Systems Inc

Document: 900-0002-02 Revision 2.0 www.active-rfid.com Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Document: 900-0002-02 Revision 2.0 Jan 18, 2005 RE: Request for Confidentiality FCC ID: TAT-GP-RWT To whom it may concern, The partners of Active RFID Systems Inc (ARS), formally request that specific technical information pertaining to product model #GP-RWT active RFID transmitter not be made available for public disclosure. We at ARS realize the implication of this sensitive information in possession by other competing organizations will have a substantial economic impact on the investment made by our corporation in developing this product for our needs. Many of the design elements contained within are considered proprietary, and we request the Commission withhold this information pursuant to the provision of 47 CFR §0.457 and §0.459 of the Commission’s Rules, and Section 522 of the Freedom of Information Act (FOIA). In addition, this product will not have internal access by the user by function of the packaging design. The plastic over-mold process will render this product sealed with no user accessible openings. Material to be held confidential and not made available to the public or end user: a) Theory of Operation: Document # 900-0005-01.PDF b) Circuit Board Photos: Document # 900-0008-01.PDF c) Circuit schematic Document # 900-0010-01.PDF d) Block Diagram Document # 900-0011-01.PDF Thank You Sincerely Joe Desimone Partner, Treasurer & CTO Active RFID Systems Inc

Document: 900-0003-01 Revision 1.0 www.active-rfid.com Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Document: 900-0003-01 Revision 1.0 Oct 19, 2005 Active RFID Systems Inc, hereby certify that, in the case of individual applicant, he or she is not subject to a denial of federal benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 USC 853a or in the case of non-individual applicant (e.g. corporation, partnership or other unincorporated association), no party to the applicant is subject to a denial of federal benefit pursuant to that action. Sincerely, Joe Desimone Partner, Treasurer & CTO Active RFID Systems Inc

Non-Conformities FCC ID: TAT-GP-RWT (Ref # E05-000 360-1) The items listed below represent requests for infor mation following review of this application. Furth er question may arise pending review of responses t o these items. OK # Non-Conformity or Comment Submitted Response Respondent / Date of Response 1 The confidentiality letter provided includes a r equest for confidentiality for circuit board photos. This request has not been su bstantiated. Please provide a revised confidentiality letter either removing th is request or providing further justification for this request. (note: if the user may take the equipment apart to view the internal components, th en the internal photos may not be held confidential. An example of suffic ient justification is the use of potting material which during an attempt to view the components would destroy the equipment.) Updated letter of confidentiality provided. Active RFID 2/2/06 2 To ensure the validity of your request, please r evise letter of confidentiality to include both references to 47 CFR §0.457 and §0.459 . Updated letter of confidentiality provided. Active RFID 2/2/06 3 Please provide external photos required by 47 CF R 2.1033(b)(7). External photos provided. Active RF ID 2/2/06 4 The ID label is incorrect. Please revise the pr oduct label to list “FCC ID: TAT-GP-RWT” Updated label provided. Active RFID 2/2/06 5 Equipment class DXX is inappropriate for the typ e of equipment. The proper equipment class applicable specifically to 15.231 i s DSR, “ Part 15 Remote Control/Security Device Transceiver.” Please confi rm if this is correct. Confirmed. Active RFID 2/2/06 6 ISO 17025 test laboratory requirements: The tes t report indicates spectrum analyzer equipment calibration due on 10/11/05. Th e radiated emissions testing performed indicates testing performed on 10 /14/05. Please explain. TCB Notes: test equipment listing appears to have b een an oversight based on the initial review. Updated test report clarifies issue. Active RFID 2/ 2/06 7 Note: The product description field is used as a description of the product as it is marketed. The product description provided, "Infrared triggered part 15 transmitter. 433.92 MHz" will appear on the grant o f equipment authorization. Since the 433.92 will already appea r on the grant, you may wish to revise this field. Should you chose to rev ise this description, please provide the text you wish to use. Otherwise no res ponse is necessary for this item. customer clarified Active RFID 1/17/06

Document: 900-0012-01 Revision 1.0 www.active-rfid.com Product Sample Exhibits 47 CFR 2.1033(b)(7) Document: 900-0012-01 Revision 1.0 Jan 19, 2006 -------------------------------------------------------------------------------------------------------------------------------------- Exhibit #1 Exhibit #2 Exhibit #3

Document: 900-0009-02 Revision 2.0 www.active-rfid.com FCC ID Sample Label & Location Document: 900-0009-02 Revision 2.0 Jan 19, 2006 -------------------------------------------------------------------------------------------------------------------------------------- FCC ID label for the ARS model GP-RWT RFID Tag: FCC Label mounted on tag side as shown:

EMC EMISSIONS - TEST REPORT (Full) Test Report No. BC500354-1 Issue Date: September 14, 2005 Model / Serial No. MN: GP-RWT/ SN: 001 Product Type Active RFID Tag Client Active RFID Systems Inc. Manufacturer Active RFID Systems Inc. License holder Active RFID Systems Inc. 477 Cr 65 Address Evergreen, CO 80437 Test Criteria Applied FCC CFR47 Part 15.231 Test Result PASS Test Project Number References BC500354 Total Pages Including Appendices: 43 Title 47 CFR 15.231: RADIO FREQUENCY DEVICES operating in the frequency range of 40.66-40.70MHz and above 70MHz (including 15.205, 15.207, 15.209 where applicable) Reviewed By : Todd Seeley Approved By : Bob Cresswell INTERNATIONAL APPROVALS LABORATORIES (IAL) reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. IAL have no liability for any deductions, inferences or generalizations drawn by the client or others from IAL issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval of IAL. This report shall not be used by the client to claim product endorsement by NVLAP (No. 200624- 0) or any agency of the US government. International Approval Laboratories and its professional staff hold government and professional organization certifications and are members of IEEE, NVLAP, and VCCI. Lab Code:200264-0 The entity logos above are for reference only and may not apply to this test report. Project File: BC500354 Page 2 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 D I R E C T O R Y Documentation Page(s) Test report 1 - 43 Directory 2 Test Regulations 3 - 4 General Remarks 5 - 6 Test-setup Photographs 7 - 9 Appendix A Test Data Sheets and Test Equipment Used 10 - 29 Appendix B Test Plan/Constructional Data Form 30 - 38 Appendix C Measurement Protocol/Test Procedures 39 - 43 STATEMENT OF MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The measurement uncertainty for Conducted Emissions in the frequency range of 150kHz – 30MHz is calculated to be ±2.30dB and for Radiated Emissions is calculated to be ±3.60dB in the frequency range of 30MHz – 200MHz and ±3.38dB in the frequency range of 200MHz – 1000MHz. EUT Received Date: 12 -Sept.-2005 Testing Start Date: 12 -Sept.-2005 Testing End Date: 14 -Oct.-2005 Project File: BC500354 Page 3 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 The tests were performed according to following regulations : 1. FCC CFR47 Part 15.205 2. FCC CFR47 Part 15.207 3. FCC CFR47 Part 15.209 4. FCC CFR47 Part 15.231 5. ICES-003 Emission Test Results: Conducted Emissions, Powerline (15.207) - Not Applicable Test Result Minimum limit margin 00.00 dB at 000.00 MHz Maximum limit exceeding dB at MHz Remarks: Battery Powered Device Radiated Emissions 15.209 / 15.231(b)(3) - PASS Test Result Minimum limit margin -8.5 dB at 1735.44 MHz Maximum limit exceeding dB at MHz Remarks: Emissions testing for 15.209 started at 0.038MHz Radiated Emissions 15.205\15.231(b)(1)(2) - PASS Test Result Minimum limit margin - 20.94 dB at 4338.6 MHz Maximum limit exceeding dB at MHz Remarks: Radiated Emissions 15.231(a)(1)&(2) - PASS Test Result Remarks: Required measurement for manually and automatic operated transmitter equipment. <5 Sec. after activation Radiated Emissions 15.231(c) - PASS Test Result Remarks: Devices operated within the frequency band of 70 – 900MHz: -20dBc Bandwidth maximum of 0.25% of the center frequency Devices operated within the frequency band of >900MHz: -20dBc Bandwidth maximum of 0.50% of the center frequency Project File: BC500354 Page 4 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 Radiated Emissions 15.231(d) - Not Applicable Test Result Remarks: Devices operated within the frequency band of 40.66 – 40.70MHz: -20dBc Bandwidth maximum of 0.01% of the center frequency as measured through the temp range of -20 to +50 deg. C, and at 85 - 115% of the nominal supply voltage at 20 deg. C “a new battery would be used in cases where the device is powered from a battery” Radiated Emissions 15.231(e) - PASS Test Result Minimum limit margin -7.8 dB at 433.86 MHz Maximum limit exceeding dB at MHz Remarks: Measurements were taken utilizing the methods dictated by Part 15.35 for averaging pulsed emissions and for limiting peak emissions Project File: BC500354 Page 5 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 GENERAL REMARKS: The following remarks are to be considered as “where applicable“ and are taken into account while completing any FCC/IC/ETSI radio tests at International Approvals Laboratories, LLC. Testing was performed in 3 different orthogonal axis to determine the worst case emissions from the device. The worst case emissions measurements are shown in this report. FCC CFR47 Part 15.31: Measurement Standards: In any case where the device is powered off a battery, a fresh battery was used during test. In cases where the device is powered off an AC supply, voltage was varied per Part 15.31 to find worst case emissions. FCC CFR47 Part 15.35: Measurement Detector Functions and Bandwidths: FCC Part 15.35 was utilized when performing the measurements within this report. In any case where the device is powered off a battery, a fresh battery was used durring test. In cases where the device is powered off an AC supply, voltage wa…

Text truncated - open the document above for the full version.

EMC EMISSIONS - TEST REPORT (Full) Test Report No. BC500354-1 Issue Date: September 14, 2005 Model / Serial No. MN: GP-RWT/ SN: 001 Product Type Active RFID Tag Client Active RFID Systems Inc. Manufacturer Active RFID Systems Inc. License holder Active RFID Systems Inc. 477 Cr 65 Address Evergreen, CO 80437 Test Criteria Applied FCC CFR47 Part 15.231 Test Result PASS Test Project Number References BC500354 Total Pages Including Appendices: 43 Title 47 CFR 15.231: RADIO FREQUENCY DEVICES operating in the frequency range of 40.66-40.70MHz and above 70MHz (including 15.205, 15.207, 15.209 where applicable) Reviewed By : Todd Seeley Approved By : Bob Cresswell INTERNATIONAL APPROVALS LABORATORIES (IAL) reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. IAL have no liability for any deductions, inferences or generalizations drawn by the client or others from IAL issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval of IAL. This report shall not be used by the client to claim product endorsement by NVLAP (No. 200624- 0) or any agency of the US government. International Approval Laboratories and its professional staff hold government and professional organization certifications and are members of IEEE, NVLAP, and VCCI. Lab Code:200264-0 The entity logos above are for reference only and may not apply to this test report. Project File: BC500354 Page 2 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 D I R E C T O R Y Documentation Page(s) Test report 1 - 43 Directory 2 Test Regulations 3 - 4 General Remarks 5 - 6 Test-setup Photographs 7 - 9 Appendix A Test Data Sheets and Test Equipment Used 10 - 29 Appendix B Test Plan/Constructional Data Form 30 - 38 Appendix C Measurement Protocol/Test Procedures 39 - 43 STATEMENT OF MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The measurement uncertainty for Conducted Emissions in the frequency range of 150kHz – 30MHz is calculated to be ±2.30dB and for Radiated Emissions is calculated to be ±3.60dB in the frequency range of 30MHz – 200MHz and ±3.38dB in the frequency range of 200MHz – 1000MHz. EUT Received Date: 12 -Sept.-2005 Testing Start Date: 12 -Sept.-2005 Testing End Date: 14 -Oct.-2005 Project File: BC500354 Page 3 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 The tests were performed according to following regulations : 1. FCC CFR47 Part 15.205 2. FCC CFR47 Part 15.207 3. FCC CFR47 Part 15.209 4. FCC CFR47 Part 15.231 5. ICES-003 Emission Test Results: Conducted Emissions, Powerline (15.207) - Not Applicable Test Result Minimum limit margin 00.00 dB at 000.00 MHz Maximum limit exceeding dB at MHz Remarks: Battery Powered Device Radiated Emissions 15.209 / 15.231(b)(3) - PASS Test Result Minimum limit margin -8.5 dB at 1735.44 MHz Maximum limit exceeding dB at MHz Remarks: Emissions testing for 15.209 started at 0.038MHz Radiated Emissions 15.205\15.231(b)(1)(2) - PASS Test Result Minimum limit margin - 20.94 dB at 4338.6 MHz Maximum limit exceeding dB at MHz Remarks: Radiated Emissions 15.231(a)(1)&(2) - PASS Test Result Remarks: Required measurement for manually and automatic operated transmitter equipment. <5 Sec. after activation Radiated Emissions 15.231(c) - PASS Test Result Remarks: Devices operated within the frequency band of 70 – 900MHz: -20dBc Bandwidth maximum of 0.25% of the center frequency Devices operated within the frequency band of >900MHz: -20dBc Bandwidth maximum of 0.50% of the center frequency Project File: BC500354 Page 4 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 Radiated Emissions 15.231(d) - Not Applicable Test Result Remarks: Devices operated within the frequency band of 40.66 – 40.70MHz: -20dBc Bandwidth maximum of 0.01% of the center frequency as measured through the temp range of -20 to +50 deg. C, and at 85 - 115% of the nominal supply voltage at 20 deg. C “a new battery would be used in cases where the device is powered from a battery” Radiated Emissions 15.231(e) - PASS Test Result Minimum limit margin -7.8 dB at 433.86 MHz Maximum limit exceeding dB at MHz Remarks: Measurements were taken utilizing the methods dictated by Part 15.35 for averaging pulsed emissions and for limiting peak emissions Project File: BC500354 Page 5 of 43 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 GENERAL REMARKS: The following remarks are to be considered as “where applicable“ and are taken into account while completing any FCC/IC/ETSI radio tests at International Approvals Laboratories, LLC. Testing was performed in 3 different orthogonal axis to determine the worst case emissions from the device. The worst case emissions measurements are shown in this report. FCC CFR47 Part 15.31: Measurement Standards: In any case where the device is powered off a battery, a fresh battery was used during test. In cases where the device is powered off an AC supply, voltage was varied per Part 15.31 to find worst case emissions. FCC CFR47 Part 15.35: Measurement Detector Functions and Bandwidths: FCC Part 15.35 was utilized when performing the measurements within this report. In any case where the device is powered off a battery, a fresh battery was used durring test. In cases where the device is powered off an AC supply, voltage wa…

Text truncated - open the document above for the full version.

EMC EMISSIONS - TEST REPORT (Full) Test Report No. BC500354-1 Issue Date: Tue 01/Nov/2005 Model / Serial No. GP-RWT / SN: 0001 Product Type Acitve RFID Tag & Infared Handheld Trigger Client Active RFID Systems, Inc. Manufacturer Active RFID Systems, Inc. License holder Active RFID Systems, Inc. 477 CR 65 Address Evergreen, CO 80437 Test Criteria Applied CISPR 22: 2003 Class B Test Result PASS Test Project Number References BC500354-1 Total Pages Including Appendices: 29 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTRUBANCE CHARACTERISTICS - LIMITS AND METHODS AND MEASUREMENTS Report Includes: IEC/EN 61000-3-2 and IEC/EN 61000-3-3 Where applicable Reviewed By : Mike Spataro Approved By : Robert Cresswell INTERNATIONAL APPROVALS LABORATORIES (IAL) reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. IAL have no liability for any deductions, inferences or generalizations drawn by the client or others from IAL issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval of IAL. This report shall not be used by the client to claim product endorsement by NVLAP (No. 200624- 0) or any agency of the US government. International Approval Laboratories and its professional staff hold government and professional organization certifications and are members of IEEE, NVLAP, and VCCI. Lab Code:200264-0 The entity logos above are for reference only and may not apply to this test report. D I R E C T O R Y Documentation Page(s) Test report 1 - 29 Directory 2 Test Regulations 3 General Remarks 3 Test-setup Photographs 4 - 5 Appendix A Test Data Sheets and Test Equipment Used 6 - 15 Appendix B Test Plan/Constructional Data Form 16 - 24 Appendix C Measurement Protocol/Test Procedures 25 - 29 STATEMENT OF MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The measurement uncertainty for Conducted Emissions in the frequency range of 150kHz – 30MHz is calculated to be ±2.30dB and for Radiated Emissions is calculated to be ±3.60dB in the frequency range of 30MHz – 200MHz and ±3.38dB in the frequency range of 200MHz – 1000MHz. EUT Received Date: 9-Sep-2005 Testing Start Date: 9-Sep-2005 Testing End Date: 13-Sep-2005 Project File: BC500354 Page 2 of 29 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 The tests were performed according to following regulations: 1. EMC Directive 89/336/EEC 2. IEC/CISPR 22: 1997, +A1: 2000, +A2: 2002 3. EN 55022: 1998, +A1: 2000, +A2: 2003 4. FCC CFR47 Part 15 5. AS/NZS CISPR22: 2002 6. CNS13438 ICES-003, Issue-4 7. VCCI-03: 2004 Emission Test Results: Conducted Emissions, Powerline - N/A Test Result Minimum limit margin 00.00 dB at 000.00 MHz Maximum limit exceeding dB at MHz Remarks: Conducted Emissions, Data I/O (Ethernet, RJ11, etc.) - N/A Test Result Minimum limit margin 00.00 dB at 000.00 MHz Maximum limit exceeding dB at MHz Remarks: Radiated Emissions (Electric Field) - PASS Test Result Minimum limit margin -5.7 dB at 224.83 MHz Maximum limit exceeding dB at MHz Remarks: Harmonics and Flicker (Conducted) - N/A Test Result Remarks: GENERAL REMARKS: TESTING WAS COMPLETED IN ACCORDANCE TO CISPR 22: 30-1000MHz Modifications required to pass: None Test Specification Deviations: None Project File: BC500354 Page 3 of 29 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 Test-setup photo(s): Radiated Emissions Project File: BC500354 Page 4 of 29 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 Test-setup photo(s): Radiated Emissions Project File: BC500354 Page 5 of 29 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 Appendix A Test Data Sheets and Test Equipment Used Project File: BC500354 Page 6 of 29 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 Radiated Emissions Data Where Applicable the Data Flows as Follows: 30-1000 MHz at 100VAC/50Hz, 110VAC/60Hz, 220VAC/60Hz, 230VAC/50Hz >1000 MHz at 110VAC/60Hz Project File: BC500354 Page 7 of 29 International Approvals Laboratories, LLC 5541 Central Avenue, Suite 110 Boulder, Colorado 80301 Voice: 303 786 7999 Fax: 303 449 6160 Rev.No 1 Radiated Electromagnetic Emissions Test Report #: BC500354 Run 04 Test Area: Pinewood Site 1 (10m) Temperature: °C Test Method: EN55022 Test Date: 13-Sep-2005 Relative Humidity: % EUT Model #: GP-RWT/ EUT Power: 3.5 VDC/3.0VDC Air Pressure: kPa EUT Serial #: 0001 Page: 1 of 4 Manufacturer: Active RFID Systems, Inc. Level Key EUT Description: Active RFID Tag & Infrared Handheld Trigger Pk – Peak Nb – Narrow Band Notes: Qp – QuasiPeak Bb – Broad Band Av - Average FREQ LEVEL CABLE / ANT / PREAMP FINAL POL / HGT / AZ DELTA1 (dB) DELTA2 (dB) (MHz) (dBuV) (dB) (dB\m) (dB) (dBuV/m) (m) (DEG) EN55022 B N/A 72.01 35.7 Qp 2.3 / 8.0 / 28.1 17.9 V / 1.0 / 0.0 -12.1 N/A 156.12 28.9 Qp 3.2 / 12.0 / 27.7 16.5 V / 1.0 / 0.0 -13.5 N/A 184.87 32.1 Qp 3.7 / 12.5 / 27.5 20.7 V / 1.0 / 0.0 -9.3 N/A No higher emissions found 90Deg, Vertical. No higher emissions found 180Deg, Vertical. No higher emissions found 270Deg, Vertical. The following were maximized between 30 and 200 MHz. 72.01MHz did not maximize any higher. 156.34 29.1 Qp 3.2 / 12.0 / 27.7 16.6 V / 1.0 / 12.0 -13.4 N/A 184.87MHz did not maximze any higher. No higher emissions found 0D…

Text truncated - open the document above for the full version.