TAVSPEEDYSOSGeoTrack

GeoTrack - Panic (Wireless Panic Button) Document Version: 0.1A Hardware Version: 0.61 User Manual GeoTrack Panic User Manual CONFIDENTIAL 2 Page Version 0.1A Registered Trademark GeoTrack ® is a registered mark of UTOFOS WIRELESS. CO., LTD. Notice The information contained in this documentation is subject to change without notice. UTOFOS WIRELESS reserves the right to make changes in content without obligation on the part of UTOFOS WIRELESS to provide notification of such change. UTOFOS WIRELESS may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. UTOFOS WIRELESS expressly disclaims all responsibility and liability for any damage or loss arousing out of other use than as specified in this documentation. The product(s) is owned by UTOFOS WIRELESS and is protected by patent and copyright laws. No part of the product (including but not limited to idea(s) for the product, the manual, etc.) may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from UTOFOS WIRELESS. Print Information Release 0.1A (March, 2007) Copyright © 2007 UTOFOS WIRELESS CO., LTD. All rights reserved. Printed in the Republic of Korea UTOFOS WIRELESS CO., LTD. 152-848, #6FI, Kolon Science Valley 187-10, Guro 3 Dong, Guro Gu, Seoul, Korea Tel : +82-2-2025-0501 Fax : +82-2-2025-0505 E-mail: [email protected] Website: http://www.utofoswireless.com GeoTrack Panic User Manual CONFIDENTIAL 3 Page Version 0.1A REVISION HISTORY Version Date Name Reason 0.1A Mar, 2007 Geonchul, Lee Initial Draft GeoTrack Panic User Manual CONFIDENTIAL 4 Page Version 0.1A Table of Contents 1. Introduction.............................................................................................................................. 5 2. External Appearance and Interface....................................................................................... 6 2.1 Front View........................................................................................................................ 6 2.2 LED.............................................................................................................6 3. Specification............................................................................................................................ 7 3.1 General Specification (Test Temperature: 25°C) .............................................................. 7 GeoTrack Panic User Manual CONFIDENTIAL 5 Page Version 0.1A 1. Introduction This manual contains important technical information and instructions for the safe and reliable use of GeoTrack Panic. Please be sure to read this manual before installing and starting up the device. GeoTrack Panic is a compact wireless panic button. The details on its features are described further in this manual. 315MHz RF [Figure 1-1] Configuration GeoTrack Panic User Manual CONFIDENTIAL 6 Page Version 0.1A 2. External Appearance and Interface 2.1 Front View Button LED [Figure 2-1] Panic Front View 2.2 LED Panic provides LED to allow the user/administrator to see how the panic operates. For more details on the LED, please see the following [Table 2-1]. Color Status Explanation On Press SOS button Red Permanently Off Normal status [Table 2-1] LED GeoTrack Panic User Manual CONFIDENTIAL 7 Page Version 0.1A 3. Specification 3.1 General Specification (Test Temperature: 25°C) Item Description Comments Transmit Frequency Range 315MHz ±100kHz Modulation Types FSK RF Power < 1mW Operation Voltage +3VDC (CR1620) Operating Temperature -40 °C~ +85°C Storage Temperature -40°C ~ +85°C Size 40.0mm X 26.0mm X 9.9mm Weight g Antenna PCB Pattern Type(Within) Approvals RoHS All hardware components are fully compliant with the EU RoHS Directive [Table 3-1] General Specification CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment WA R N I N G This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help

UTOFOS WIRELESS Co,. Ltd. Date:Jun 28,2007 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize <ESTECH CO.,Ltd.>, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by <ESTECH CO., Ltd.> on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing <ESTECH CO.,Ltd.> as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jae H Choi/C.E.O/Hardware Team Tel:82-2-2025-0500 REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us.

#601, Kolong Science Valley Guro 3Dong, Gurogu, Seoul, Korea, 152‐848 TEL : +82.2.2025.0500 FAX : +82.2.2025‐0505 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. In re : UTOFOS Wireless Co., Ltd. FCC ID: TAVSPEEDYSOS Request for Confidentiality Gentlemen: In accordance with 0.459 of CFR 47, Utofos Wireless Co. hereby requests confidentiality of the Block Diagrams, Schematics, Operational Description, Part List for the above referenced Certification application. These documents contain detailed system and equipment description and related information about the product, which Utofos Wireless Co., Ltd considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Utofos Wireless Co. feels this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely Yours, ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Jae.H Choi /C.E.O./Hardware Team

UTOFOS WIRELESS Co., Ltd. GeoTrack MODEL : Panic FCC ID : TAVSPEEDYSOS Caution : This device complies with part 15 of the FCC Rules

FCC ID: 1. Duty Cycle 1.2 Test Equipments The following test equipments are used during tests Cal. Due Date 2008-03-02 2008-03-02 ESTECH CO., LTD. http://www.estech.co.kr TAVSPEEDYSOS The Panic transmitter tested here transmits pulses with varying duty cycle. Verification of pulse operation at 74.2% duty cycles is provided here. Measurements were taken at 315MHz with the span set to zero on the E4407B spectrum analyzer. EquipmentManufacturerModel Spectrum Analyzer AgilentE4407B DC Power SupplyINTERACTAK-3010 Report Number : duty cycle1 of 4Report Number : duty cycle1 of 4 FCC ID: ESTECH CO., LTD. http://www.estech.co.kr TAVSPEEDYSOS Report Number : duty cycle2 of 4 * Duty cycle = 40.32/54.35 x 100 = 74.2% Report Number : duty cycle2 of 4 FCC ID: ESTECH CO., LTD. http://www.estech.co.kr TAVSPEEDYSOS Report Number : duty cycle3 of 4 * Deactive transmission time: 385.5ms Report Number : duty cycle3 of 4

Test Report for FCC Company name Address Telephone Product name Model name. Serial No. Test date Testing location Standard □ Class A■ Class BTest resultN/A □ Class A■ Class BTest resultOK Tested by Reviewed by Abbreviation * Note - This test report is not permitted to copy partly without our permission - This test result is dependent on only equipment to be used - This test result based on a single evaluation of one sample of the above mentioned OK, Pass = Passed, Fail = Failed, N/A = not applicable UTOFOS WIRELESS Co., Ltd. 152-848 #601 Kolon Science Valley 187-10, Guro3dong Gurogu, Seoul, Korea 82-2-2025-0500 Measurement facility registration number Senior Engineer M.J.Song Engineering Manager J.M.Yang 94696 (Signature) (Signature) Date of issue ESTECH. Co., Ltd. 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea Test item ■ Conducted Emission ■ Radiated Emission FCC PART 15.231 Subpart C(2006) , ANSI C 63.4 2003 2007-6-20 ~ 2007-6-28 Panic NONE UTOFOS WIRELESS Co., Ltd. KOREA Report Number : ESTF150706-008 , Web : www. estech. co. kr Page 1 of 14 Report NumberESTF150706-008 Manufacturer Country of origin Applicant Product 2007-06-28 GeoTrack 3 4 5 6 8 8 8 9 10 10 10 11 12 14 Report Number : ESTF150706-008 , Web : www. estech. co. kr Page 2 of 14 6. Measurement of Occupied Bandwidth............................................................... 6.1 Measurement equipment ........................................................................... 6.2 Measurement result ................................................................................. 6.3 Test data ................................................................................................ 4. Measurement condition ................................................................................. 5.3 Test data ................................................................................................ 7. Photographs of test setup ........................................................................... 8. Photogra phs of EUT .................................................................................... 5.2 Environmental conditions ........................................................................ 5. Measurement of radiated emission ............................................................... 5.1 Measurement e quipment ........................................................................... Contents 1. Laboratory Information ................................................................................. 2. Description of EUT ....................................................................................... 3. Test Standards ............................................................................................. 1. Laboratory Information 1.1 General 1.2 Test Lab. Corporation Name : ESTECH Co. Ltd Head Office : Rm 1015, World Venture Center II, 426-5, Gasan-dong, Geumcheon-gu, Seoul, Korea (Safety & Telecom. Test Lab) EMC Test Lab : 58-1 Osan-Ri, GaNam-Myon, YeoJoo-Gun, KyungKi-Do, Korea 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea 1.3 Official Qualification(s) MIC : Granted Accreditation from Ministry of Information & Communication for EMC, Safety and Telecommunication KOLAS : Accredited Lab By Korea Laboratory Accreditation Schema base on CENELEC requirements FCC : Filed Laboratory at Federal Communications Commission VCCI : Granted Accreditation from Voluntary Control Council for Interference from ITE This EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable technical standards and is tested in accordance with the measurement procedures as indicated in this report. ESTECH Lab attests to accuracy of test data. All measurement reported herein were performed by ESTECH Co., Ltd. ESTECH Lab assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report Number : ESTF150706-008 , Web : www. estech. co. kr Page 3 of 14 2. Description of EUT 2.1 Summary of Equipment Under Test Product name : Model Number : Panic Serial Number : Manufacturer : Country of origin : Rating : Receipt Date : EUT Type: RF Remote Control Output Power : <1mW Freq. Range: 315.04 MHz Oscillator(s): 315MHZ Report Number : ESTF150706-008 , Web : www. estech. co. kr Page 4 of 14 GeoTrack NONE UTOFOS WIRELESS Co., Ltd. KOREA INPUT : 3V dc(BATTERY) 2007-04-17 3. Test Standards Test Standard : FCC PART 15 (2006) Test Method : ANSI C 63.4 (2003) This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and AC power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain decides that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment These method apply to the measurement of individual units or systems comprised of multiple units This Standard sets out the regulations under which an intentional, unintentional, or incidental radiator may be operated without an individual license. It also contains the technical specifications, administrative requirements and other conditions relating to the marketing of Part 15 devices. Report Number : ESTF150706-008 , Web : www. estech. co. kr Page 5 of 14 4. Measurement Condition 4.1 EUT Operation. 4.2 Configuration and Peripherals * The EUT was in the following operation mode during all testing * The operational conditions of the EUT was determined by the manufacturer according to the typical use of the EUT with respect to the expected hightest level of emission * The…

Text truncated - open the document above for the full version.

TEST SETUP PHOTO 1. Radiated Emission setup photo (30 ~ 1000 MHz) 1.1. Front 1.2. Rear 2. Radiated Emission setup photo (Above 1000 MHz)