TD6ATGN-AP3001101iFusion AP300 SmartStation

SmartStation User Manual For iFusion documentation in other languages and general support information, visit http://www.thefusionphone.com Copyright © 2011 All rights reserved. No part of this User’s Manual may be reproduced or copied by any means without the consent of the manufacturer. The information and specification in this document may change without prior notice. Bluetooth trademarks are owned by Bluetooth SIG, Inc. and used under license. FaceTime is a trademark of Apple, Inc. i Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Bluetooth connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. Preparing the iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Preparing the iFusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. Pairing the devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Making and answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Switching a call to the iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Switching a call to the iFusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Muting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Playing music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Synchronizing data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using iFusion with FaceTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 ii iFusion User Manual1 Introduction Congratulations on your purchase of iFusion. This manual shows you how to pair your iPhone with the iFusion, make and receive calls, listen to music, charge your iPhone, and synchronize iPhone data with your computer. Front view 1Hook switchHandset on-hook, off-hook switch. 2 Bluetooth button – Touch and hold (for 5 seconds) to enter pairing mode. Rapid blinking light: Pairing Slow blinking light: Reconnecting Steady light: Connected 3 Mute button – Touch to mute the handset or speaker. To unmute the call, touch it again. Red light: Muted 2iFusion User Manual Back view 4 Speaker button – Touch to make a call using the speaker. Green light: Hands-free mode (speaker on) 5 Volume Down button – Touch to lower the volume. Rapid blinking: Minimum reached 6 Volume Up button – Touch to raise the volume. Rapid blinking: Maximum reached 7 Docking cradle Where you connect the iPhone to the iFusion. While docked, the iPhone charges. 1Power portConnects the power cord. 2Mini USB port Connects the iFusion to a computer. Use a mini USB male to standard USB male cable. 3 Stereo 3.5mm audio jack Connects external speakers (for music). iFusion User Manual3 Bluetooth connection You will need to pair your iPhone with the iFusion. iFusion is compatible with Bluetooth 2.1+EDR. The iFusion provides Bluetooth support for iPhones up to approximately 10 meters (33 feet) away. Direct line-of-sight provides a longer range. Here is some general information about this Bluetooth connection: •After the devices have been paired, the iFusion saves the connection details in memory. Multiple iPhones can be paired with the iFusion, but only one iPhone can be actively connected at a time. •The connection is severed once you take the iPhone out of range of the iFusion. When you bring the iPhone back within range, the devices automatically reconnect. For optimal Bluetooth performance with the iFusion: •Keep the iPhone docked in the iFusion. •Position the iFusion away from radio frequency (RF) emission sources such as lap- tops or other electronic equipment, because such devices can interfere with Blue- tooth communications. Note:If more than one Bluetooth device is connected to the iPhone, it may take several seconds for the iPhone to connect the voice path to the iFusion for incoming calls. For this reason, we recommend that you disconnect all other bluetooth devices from the iPhone. 4Handset portConnects the handset cord to the iFusion. 5Cable guide Holds the handset cord in place, so that the iFusion does not wobble on the desk. 4iFusion User Manual 1. Preparing the iPhone On the iPhone, go to Settings > General > Bluetooth. Turn on Bluetooth. The iPhone is now discoverable, and it searches for other Bluetooth devices nearby. 2. Preparing the iFusion Touch and hold the Bluetooth button on the iFusion for three to five seconds, until the but- ton blinks rapidly. The iFusion is now in pairing mode. Note: If the pairing process is not completed within 60 seconds, the Bluetooth button blinks slowly again, indicating that the process was cancelled. Repeat step 2. 3. Pairing the devices Once the iFusion is listed on the iPhone screen, tap iFusion xxxxxx to pair the two devices. On the iPhone, the status changes from Not Paired to Connected when the Bluetooth connection has been made. iFusion User Manual5 After the connection has been established, the Bluetooth button on the iFusion glows with a steady blue light. If the connection is lost, the button blinks slowly. When you bring the iPhone back into range, the light glows a steady blue again after it reconnects. If you try to connect an iPhone to the iFusion while another iPhone is already connected, the connection request is refused and you see an error message. 6iFusion User Manual Making and answering call…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Series No Label Rating Label P/N Label G-TEK ELECTRONICS CORP. G-TEK ELECTRONICS SND. BHD. MODEL: PART NO.: REV.: PAGE: SCALE: UNIT: DESIGNED: CHECKED: APPROVED: S & M S & M S & M NAME: MAT.: DATE: mm N / A 1.4 Label Place 13/May/2011 AP-300 VATHY SS CHONG GC CHIN N/A Model:AP300 Product Name:iFusion SmartStation This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation FCC ID:TD6ATGN-AP3001101 IC:2964A-AP300GT1101 Designed by AltiGen in California, USA Assembled in Malaysia P/N:FSN-AP300-AM01 EAN UPC 0 615546913013 6 1554691301 3 P/N:FSN-AP300-AM01 EAN UPC 0 615546913013 6 1554691301 3 Model:AP300 Product Name:iFusion SmartStation This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation FCC ID.:TD6ATGN-AP3001101 IC:2964A-AP300GT1101 Designed by AltiGen in California, USA Assembled in Malaysia 00.45-0.000B-4.30F BT: 000AAA000200 S/N: YYWWWMPAP3XXXXX 00.45-0.000B-4.30F BT: 000AAA000200 S/N: YYWWWMPAP3XXXXX

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13

FCC ID: TD6ATGN-AP3001101 Report No.: RF110323C16 OPERATIONAL DESCRIPTION The transmitter of the EUT (iFusion AP300 Bluetooth Station) is powered from 12Vdc from the power adapter. The antenna is Inverted F Antenna with Switchable Receptacle antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA110323C16 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110323C16 MODEL NO.: AP300 FCC ID: TD6ATGN-AP3001101 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: AltiGen Communications, Inc. ADDRESS: 410 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan Report No.: SA110323C16 Report Format Version 4.0.0 2 1. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 3. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110323C16 Report Format Version 4.0.0 3 4. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FCC ID: TD6ATGN-AP3001101 FOR BLUETOOTH OF EUT: FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 0.4 1.36 20 0.0003 1.00 FCC ID: BCGA1241 (iPhone2) FOR BLUETOOTH OF iPhone2: FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 6.3 2 20 0.0013 1.00 FOR WLAN OF iPhone2: FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 16.89 2 20 0.0154 1.00 FOR WWAN OF iPhone2: FREQUENCY BAND (MHz) MAX RADIATED POWER (dBm) SOUCE-TIME AVERAGE POWER(dBm) MPE (mW/cm 2 ) LIMIT (mW/cm 2 ) 1850-1910 31.62 25.62 0.073 1.00 Report No.: SA110323C16 Report Format Version 4.0.0 4 FCC ID: BCGA1303A (iPhone3) FOR BLUETOOTH OF iPhone3: FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 10 1.2 20 0.0026 1.00 FOR WLAN OF iPhone3: FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 25.58 1.2 20 0.0948 1.00 FOR WWAN OF iPhone3: FREQUENCY BAND (MHz) MAX RADIATED POWER (dBm) SOUCE-TIME AVERAGE POWER(dBm) MPE (mW/cm 2 ) LIMIT (mW/cm 2 ) 824-849 30.96 24.96 0.062 0.55 FCC ID: BCG-E2380B (iPhone4) FOR BLUETOOTH OF iPhone4: FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 13.5 -1.63 20 0.0031 1.00 FOR WLAN OF iPhone4: FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 26 -1.63 20 0.0544 1.00 FOR WWAN OF iPhone4: FREQUENCY BAND (MHz) MAX RADIATED POWER (dBm) SOUCE-TIME AVERAGE POWER(dBm) MPE (mW/cm 2 ) LIMIT (mW/cm 2 ) 824-849 30.1 24.1 0.051 0.55 1850-1910 30.1 24.1 0.051 1.00 Report No.: SA110323C16 Report Format Version 4.0.0 5 CONCULSION: Both of the modules can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. BLUETOOTH OF EUT + BLUETOOTH OF iPhone2 + WLAN OF iPhone2 + WWAN OF iPhone2 = 0.0003/1 + 0.0013/1 + 0.0154/1 + 0.073/1 = 0.09 2. BLUETOOTH OF EUT + BLUETOOTH OF iPhone3 + WLAN OF iPhone3 + WWAN OF iPhone3 = 0.0003/1 + 0.0026/1 + 0.0948/1 + 0.062/0.55 = 0.2104 3. BLUETOOTH OF EUT + BLUETOOTH OF iPhone4 + WLAN OF iPhone4 + WWAN OF iPhone4 = 0.0003/1 + 0.0031/1 + 0.0544/1 + 0.051/0.55 = 0.1505 Therefore, the maximum calculation of this situation is 0.2104, which is less than the “1” limit.

Report No.: RF110323C16 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110323C16 MODEL NO.: AP300 FCC ID: TD6ATGN-AP3001101 RECEIVED: Mar. 23, 2011 TESTED: Mar. 30 ~ Apr. 1, 2011 ISSUED: Apr. 14, 2011 APPLICANT: AltiGen Communications, Inc. ADDRESS: 410 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 65 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110323C16 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................4 1. CERTIFICATION.............................................................................................5 2. SUMMARY OF TEST RESULTS.....................................................................6 2.1 MEASUREMENT UNCERTAINTY..................................................................7 3. GENERAL INFORMATION.............................................................................8 3.1 GENERAL DESCRIPTION OF EUT................................................................8 3.2 DESCRIPTION OF TEST MODES..................................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST...........................................10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL................11 3.2.3 GENERAL DESCRIPTION OF APPLIED STANDARDS...............................13 3.2.4 DESCRIPTION OF SUPPORT UNITS..........................................................14 4. TEST TYPES AND RESULTS.......................................................................15 4.1 CONDUCTED EMISSION MEASUREMENT................................................15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..............................15 4.1.2 TEST INSTRUMENTS..................................................................................16 4.1.3 TEST PROCEDURES...................................................................................16 4.1.4 DEVIATION FROM TEST STANDARD.........................................................17 4.1.5 TEST SETUP................................................................................................17 4.1.6 EUT OPERATING CONDITIONS..................................................................17 4.1.7 TEST RESULTS............................................................................................18 4.2 RADIATED EMISSION MEASUREMENT.....................................................20 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................20 4.2.2 TEST INSTRUMENTS..................................................................................21 4.2.3 TEST PROCEDURES...................................................................................22 4.2.4 DEVIATION FROM TEST STANDARD.........................................................22 4.2.5 TEST SETUP................................................................................................23 4.2.6 EUT OPERATING CONDITIONS..................................................................23 4.2.7 TEST RESULTS............................................................................................24 4.3 NUMBER OF HOPPING FREQUENCY USED.............................................31 4.3.1 LIMIT OF HOPPING FREQUENCY USED...................................................31 4.3.2 TEST INSTRUMENTS....................................................................................31 4.3.3 TEST PROCEDURES...................................................................................31 4.3.4 DEVIATION FROM TEST STANDARD.........................................................32 4.3.5 TEST SETUP................................................................................................32 4.3.6 TEST RESULTS............................................................................................32 4.4 DWELL TIME ON EACH CHANNEL.............................................................35 4.4.1 LIMIT OF DWELL TIME USED......................................................................35 4.4.2 TEST INSTRUMENTS..................................................................................35 4.4.3 TEST PROCEDURES...................................................................................35 4.4.4 DEVIATION FROM TEST STANDARD.........................................................35 4.4.5 TEST SETUP................................................................................................36 4.4.6 TEST RESULTS............................................................................................36 4.5 CHANNEL BANDWIDTH...............................................................................44 4.5.1 LIMITS OF CHANNEL BANDWIDTH............................................................44 Report No.: RF110323C16 3 Report Format Version 4.0.0 4.5.2 TEST INSTRUMENTS..................................................................................44 4.5.3 TEST PROCEDURE.....................................................................................44 4.5.4 DEVIATION FROM TEST STANDARD.........................................................45 4.5.5 TEST SETUP................................................................................................45 4.5.6 EUT OPERATING CONDITION....................................................................45 4.5.7 TEST RESULTS..........................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST