THVTI010Dosing Unit dDrive

Draft dDrive English User Manual Dosing Unit Deutsch Benutzerhandbuch Español Manual de usuario Français Guide de l'utilisateur Italiano Manuale per l'utente Polski Podręcznik użytkownika Português Manual do usuário 简体中文 用户手册 30674874A 2021/5/12 8:28 - Schema ST4 PDF engine - Layout by Victor Mahler Draft Draft User Manual Dosing Unit English Benutzerhandbuch Deutsch Manual de usuario Español Guide de l'utilisateur Français Manuale per l'utente Italiano Podręcznik użytkownika Polski Manual do usuário Português 用户手册 简体中文 Draft Draft 1Introduction Thank you for choosing a METTLER TOLEDO dDrive. The dDrive is designed to be used as an accessory. This document provides you with the information you need to get started with your METTLER TOLEDO dDrive. This User Manual contains the information you need to set up the accessory, put it into operation and maintain it. Keep the User Manual for future reference. Include the User Manual if you transfer the accessory to other parties. The Reference Manual of the main instrument contains additional information on the interface between the accessory and the main instrument. Only use the accessory according to this User Manual and the Reference Manual of the main instrument. If you do not use the accessory according to both documents or if it is modified, the safety of the main instrument may be impaired and Mettler-Toledo GmbH assumes no liability. User Manual and Reference Manual are available online. See [Download manuals Page 6]. For third party licenses and open source attribution files, see the following link: u www.mt.com/licenses If you have any additional questions, contact your authorized METTLER TOLEDO service representative or dealer. u www.mt.com/contact See also Download manuals Page 6 1.1Explanation of conventions and symbols Refers to an external document. Elements of instructions Instructions always contain action steps and can contain prerequisites, intermediate results and results. If an instruction contains more than one action step, the action steps are numbered. Prerequisites that must be fulfilled before the individual action steps can be executed. 1Action step 1 Intermediate result 2Action step 2 Result 1.2Compliance information National approval documents, e.g., the FCC Supplier Declaration of Conformity, are available online and/or included in the packaging. u http://www.mt.com/ComplianceSearch Application-relevant standards and norms are listed on the internet. Contact METTLER TOLEDO for questions about the country-specific compliance of your instrument. u www.mt.com/contact European Union The instrument complies with the directives and standards listed on the EU Declaration of Conformity. en 3Dosing Unit Draft United States of America This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference. 2.This device must accept any interference received, including interference that may cause undesired operation. Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. 2Safety information 2.1Definition of signal words and warning symbols Safety notes contain important information on safety issues. Ignoring the safety notes may lead to personal injury, damage to the instrument, malfunctions and false results. Safety notes are marked with the following signal words and warning symbols: Signal words CAUTION A hazardous situation with low risk, resulting in minor or moderate injury if not avoided. NOTICE A hazardous situation with low risk, resulting in damage to the instrument, other material damage, malfunctions and erroneous results, or loss of data. Warning symbols General hazard: read the User Manual for information about the hazards and the resulting measures. 2.2Product specific safety notes Intended use The dDrive is intented to be used by trained staff. The dDrive is compatible with all main instruments that list it as an accessory in their Reference Manual. Together with a compatible burette, the dDrive is designed to aspirate and dispense liquids. The liquids must have the following properties: Viscosity: <10 mPa*s at ambient temperature No particles No degasing when underpressure is applied The liquids are compatible with the materials they come into contact with. Any other type of use and operation beyond the limits of use stated by Mettler-Toledo GmbH without consent from Mettler-Toledo GmbH is considered as not intended. 4Dosing Unit Draft Responsibilities of the instrument owner The instrument owner is the person holding the legal title to the accessory and who uses the accessory and the main instrument or authorizes any person to use them, or the person who is deemed by law to be the operator of the accessory and the main instrument. The instrument owner is responsible for the safety of all users of the accessory and thir…

Text truncated - open the document above for the full version.

Seite 1 / 1 PHOENIX TESTLAB GmbH Product Certification Department Koenigswinkel 10 32825 Blomberg, Germany Power of Attorney To Whom It May Concern: Please be advised that we, Mettler-Toledo GmbH, authorize the following person from PHOENIX TESTLAB GmbH:  Sabrina Berghahn to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters in following countries: USA (FCC) & CANADA (ISED) PHOENIX TESTLAB GmbH has our permission to use our technical documents for the approvals for the following device: Product description: Dosing Unit dDrive FCC ID: THVTI010 IC: 22032-TI010 HVIN: dDrive PMN: dDrive FVIN: n.a. Unless future correspondence from Mettler-Toledo GmbH, please extend your full cooperation to PHOENIX TESTLAB GmbH regarding matters to the above mentioned product(s) to 12 months after the signatory date of this authorization. Contact Person: Luis Cachón Position in the Company: Head of Legal Metrology Date of Signature: May 14, 2021. ___________________________ Signatory (signature of the applicant)

Long/Short-term Confidentiality Request PHOENIX TESTLAB GmbH Date: 21 May 2021 Product Certification Königswinkel 10 D 32825 Blomberg Germany FCC ID: THVTI010 To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long-term confidential treatment of information accompanying this application as outlined below: ☒ Schematics ☐ Parts List ☒ Block Diagram ☐ Tune-Up Info ☒ Operational Description In addition, we hereby request the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure ☐ for an initial period of days ☐ until: ☒ not applicable ☐ External Photos ☐ Test Setup Photos ☐ Internal Photos ☐ Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Sabrina Berghahn Authorized Agent

External photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 23.04.2021Order Number: 21-1105625page 1 of 6 3-D-view 1 External photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 23.04.2021Order Number: 21-1105625page 2 of 6 3-D-view 2 External photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 23.04.2021Order Number: 21-1105625page 3 of 6 Burette removed External photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 23.04.2021Order Number: 21-1105625page 4 of 6 Burette, 3-D-view 1 External photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 23.04.2021Order Number: 21-1105625page 5 of 6 Burette, 3-D-view 2 External photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 23.04.2021Order Number: 21-1105625page 6 of 6 Type plate of dedicated power supply, bottom view

Operational Description dDrive RFID functionality 9.4.2021 METTLER TOLEDO Page 5 document under NDA 2.5 Typ label proposal  Size: 118mmx41mm

Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 1 of 9 Internal view 1 (bottom cover removed) Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 2 of 9 Internal view 2 (housing removed) Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 3 of 9 Internal view 3 (view to PCBs) Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 4 of 9 DoserDetectionRFID PCB, top view Antenna Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 5 of 9 DoserDetectionRFID PCB, bottom view Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 6 of 9 MotorControlFOC PCB, top view Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 7 of 9 MotorControlFOC PCB, bottom view Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 8 of 9 DoserControl PCB, top view Internal photos of dDrive Examiner: Thomas KÜHNRevision:00 Date of issue: 21.04.2021Order Number: 21-1105625page 9 of 9 DoserControl PCB, bottom view

Königswinkel 10 32825 Blomberg, Germany Phone: +49 (0) 52 35 / 95 00-0 Fax:+49 (0) 52 35 / 95 00-10 [email protected] www.phoenix-testlab.de Test Report Report Number: F210562E1 Equipment under Test (EUT): dDrive Applicant: Mettler-Toledo GmbH Manufacturer: Mettler-Toledo GmbH Examiner:Thomas KÜHNReport Number: F210562E1 Date of Issue: 23.04.2021Order Number: 21-110562Page 2 of 24 References [1] ANSI C63.10: 2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices [2]FCC CFR 47 Part 15 Radio Frequency Devices [3]RSS-210 Issue 10 (December 2019) Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment [4]RSS-Gen Issue 5 (February 2021)Amendment 2 General Requirements for Compliance of Radio Apparatus Test Result The requirements of the tests performed as shown in the overview (clause 4) were fulfilled by the equipment under test. The complete test results are presented in the following. This test report is only valid in its original form. Any reproduction of its contents in extracts without written permission of the accredited test laboratory PHOENIX TESTLAB GmbH is prohibited. The test results herein refer only to the tested sample. PHOENIX TESTLAB GmbH is not responsible for any generalisations or conclusions drawn from these test results concerning further samples. Any modification of the tested samples is prohibited and leads to the invalidity of this test report. Each page necessarily contains the PHOENIX TESTLAB Logo and the TEST REPORT NUMBER. Tested and written by:Thomas KÜHN23.04.2021 Name Signature Date Reviewed and approved by:Manuel BASTERT23.04.2021 Name Signature Date Examiner:Thomas KÜHNReport Number: F210562E1 Date of Issue: 23.04.2021Order Number: 21-110562Page 3 of 24 Contents:Page Identification ................................................................................................................................. 4 1.1Applicant ................................................................................................................................................... 4 1.2Manufacturer ............................................................................................................................................ 4 1.3Test Laboratory ........................................................................................................................................ 4 1.4EUT (Equipment under Test) ................................................................................................................... 5 1.5Technical Data of Equipment ................................................................................................................... 5 1.6Dates ........................................................................................................................................................ 6 Operational States ........................................................................................................................ 6 Additional Information ................................................................................................................... 6 Overview ....................................................................................................................................... 7 Results.......................................................................................................................................... 8 5.1Conducted emissions on power supply lines ........................................................................................... 8 5.1.1Test method ..................................................................................................................................... 8 5.1.2Test results conducted emissions on power supply lines ............................................................... 9 5.2Radiated emissions ................................................................................................................................ 10 5.2.1Test method ................................................................................................................................... 10 5.2.2Test results preliminary measurement 150 kHz to 2 GHz ............................................................. 16 5.2.3Test results final measurement 150 kHz to 30 MHz ...................................................................... 18 5.2.4Test results final measurement 30 MHz to 1 GHz ......................................................................... 19 5.2.5Test results final measurement above 1 GHz ............................................................................... 20 5.399 % bandwidth ...................................................................................................................................... 21 5.3.1Test method ................................................................................................................................... 21 5.3.2Test results 99 % bandwidth ......................................................................................................... 22 Test Equipment used for Tests ................................................................................................... 23 Test site Validation ..................................................................................................................... 23 Report History ............................................................................................................................. 24 List of Annexes ........................................................................................................................... 24 Examiner:Thomas KÜHNReport Number: F210562E1 Date of Issue: 23.04.2021Order Number: 21-110562Page 4 of 24 Identification 1.1 Applicant Name:Mettler-Toledo GmbH Address: Heuwinkelstr. 3, 8606 Nänikon Country:Switzerland Name for contact purposes:Mr. Heiko DOBRINSKI Phone:+41 55 806 75 46 e…

Text truncated - open the document above for the full version.

Annex A Test Setup Photos Examiner:Thomas KÜHNReport Number: F210562E1 Date of issue: 23.04.2021Order Number: 21-110562page 1 of 7 Test setup semi anechoic chamber (below 1 GHz) Annex A Test Setup Photos Examiner:Thomas KÜHNReport Number: F210562E1 Date of issue: 23.04.2021Order Number: 21-110562page 2 of 7 Test setup semi anechoic chamber (above 1 GHz) Annex A Test Setup Photos Examiner:Thomas KÜHNReport Number: F210562E1 Date of issue: 23.04.2021Order Number: 21-110562page 3 of 7 Test setup semi anechoic chamber (150 kHz to 30 MHz) Annex A Test Setup Photos Examiner:Thomas KÜHNReport Number: F210562E1 Date of issue: 23.04.2021Order Number: 21-110562page 4 of 7 Test setup semi anechoic chamber (30 MHz to 1 GHz) Annex A Test Setup Photos Examiner:Thomas KÜHNReport Number: F210562E1 Date of issue: 23.04.2021Order Number: 21-110562page 5 of 7 Test setup semi anechoic chamber (1 GHz to 2 GHz) Annex A Test Setup Photos Examiner:Thomas KÜHNReport Number: F210562E1 Date of issue: 23.04.2021Order Number: 21-110562page 6 of 7 Test setup outdoor test sites Annex A Test Setup Photos Examiner:Thomas KÜHNReport Number: F210562E1 Date of issue: 23.04.2021Order Number: 21-110562page 7 of 7 Test setup shielded chamber