TORSS-200-AT802.11a/b/g AP

SpectraGuard Sensor Installation Guide Disclaimer SpectraGuard Sensor Installation Guide ii THE INFORMATION IN THIS GUIDE IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE. AIRTIGHT NETWORKS, INC., IS NOT LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT. Limitation of Liability AirTight Networks will not be liable to customer or any other party for any indirect, incidental, special, consequential, exemplary, or reliance damages arising out of or related to the use of SpectraGuard Sensor under any legal theory, including but not limited to lost profits, lost data, or business interruption, even if AirTight knows of or should have known of the possibility of such damages. Regardless of the cause of action or the form of action, AirTight's total cumulative liability for actual damages arising out of or related to the use of SpectraGuard Sensor will not exceed the price paid for SpectraGuard Sensor. Copyright © 2003 – 2005 AirTight Networks, Inc. All rights reserved. AirTight Networks, The AirTight logo, and SpectraGuard™ are trademarks of AirTight Networks, Inc. All other products and services are trademarks, registered trademarks, and service marks or registered service marks of their respective owners. Intellectual Property Notice: One or more features and components in this product have patents pending, which are owned by AirTight Networks, Inc. End User License Agreement SpectraGuard Sensor Installation Guide iii End User License Agreement This End User License Agreement (“EULA”) governs the terms and conditions of use of AirTight products. If a Purchase Order has been issued by the Customer to AirTight for the use of this product, additional terms listed in the Purchase Order will also apply. In the event of a conflict between this EULA and a Purchase Order, the terms of the Purchase Order will prevail. 1. Definitions Capitalized terms used in this EULA are defined in this Section 1 or the section in which they are first used. 1.1 “Customer” means an end-user or a business entity that purchases AirTight products and operates it under the terms and conditions described in this agreement. 1.2 “AirTight” means AirTight Networks, Inc., AirTight Networks Private Limited or its related companies and subsidiaries. 1.3 “Delivery” means delivery of the Hardware and Software. 1.4 “Documentation” means the standard end-user technical documentation and specifications that AirTight supplies with the Hardware and Software. Advertising and marketing materials are not Documentation. 1.5 “Error” means a reproducible failure of the Software or Hardware to perform in substantial conformity with its Documentation. 1.6 "Hardware" means Sensor, Sentry, Appliance or any other hardware component provided by AirTight. 1.7 “Intellectual Property Rights” means copyrights, trademarks, service marks, trade secrets, patents, patent applications, moral rights, contractual rights of non-disclosure or any other intellectual property or proprietary rights, however arising, throughout the world. 1.8 “Release” means any Update or Upgrade if and when these are made available by AirTight. In the event of a dispute as to whether a particular Release is an Update or an Upgrade, AirTight's published designation will be final. 1.9 “Software” means the software provided by AirTight to Customer (in object code format or loaded on AirTight Hardware) and any Release thereto if and when such Releases are made available by AirTight. 1.10 “Update” means, if and when available, any error corrections, fixes, workarounds or other maintenance releases in respect of the Software provided by AirTight to Customer that do not add additional functionality to the Software. 1.11 “Upgrade” means, if and when available, new releases or versions of the Software, that materially improve the functionality of, or add material functional capabilities to the Software and in respect of which AirTight charges Customer additional license fees. 2. Terms of Sale 2.1 Scope. This EULA together with any Purchase Order(s) governs all transactions between the parties with respect to the Hardware and Software provided by AirTight. This EULA does not require either party to enter into such transactions, but together with the Purchase Order specifies the terms and conditions of such transactions if and when they take place. 2.2 Software. All software provided by AirTight is licensed, not sold. Customer's right to use such Software is subject to the license granted in Section 3 of this EULA. 2.3 Installation. Customer will be responsible for installing the Software and Hardware unless Customer purchases Installation Services from AirTight pursuant to a separate Professional Services Agreement. 3. License Grant 3.1 Hardware and Software License. For each unit of Hardware and Software that is supplied to End User License Agreement SpectraGuard Sensor Installation Guide iv Customer, AirTight grants Customer a non-exclusive, non-transferable (except as provided in Section 9.5), non- sub licensable license during the term of this EULA, to install and execute such Software and Hardware for Customer's own business purposes. Each license is subject to the terms and conditions of this EULA, including but not limited to this Section 3 and Customer's obligation to pay the applicable license fees for the use of such Hardware and Software. 3.2 Restrictions on Use. Notwithstanding the license grant in Section 3.1, Customer may not: (a) use the Software except as expressly permitted under Section 3.1; (b) separate the component programs of the Software for use on different computers; (c) adapt, alter, publicly display, publicly perform, translate, create derivative works of or otherwise modify the Software; (d) sublicense, lease, rent, loan, dis…

Text truncated - open the document above for the full version.

AirTight Networks, Inc 339N. Bernardo Avenue, Suite 200 Mountain View, CA 94043 +1-650-961-1111 Date: Oct. 13, 2005 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize the Taiwan office of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS TW, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS TW on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS TW as our agent, we still recognize that we are responsible to: a) Comply with the relevant provisions of the certification program; b) Make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) Make claims regarding certification only in respect of the scope for which certification has been granted; d) Do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) Upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) Use certification only to indicate the products are certified as being in conformity with specified standards; g) Endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) Ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) Keep a record of all complaints made known to the us relating to the product compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) Take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) Document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Samir Palnitkar / Product Manager AirTight Networks, Inc 339N. Bernardo Avenue, Suite 200 Mountain View, CA 94043 +1-650-961-1111 REMARKS: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us.

AirTight Networks, Inc 339N. Bernardo Avenue, Suite 200 Mountain View, CA 94043 +1-650-961-1111 Oct. 13,2005 Federal Communications Commission Authorization and Evaluation Division FCC ID: TORSS-200-AT Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Schematics 2. Operational Description 3. Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, 339N. Bernardo Avenue, Suite

Compliance Certification Services Inc. Report No: 50906003 Date of Issue: October 21, 2005 Page 1 Total Page: 7 Rev. 00 EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No: 50906003 Date of Issue: October 21, 2005 Page 2 Rev.00 Compliance Certification Services Inc. Report No: 50906003 Date of Issue: October 21, 2005 Page 3 Rev.00 Omnidirectional antenna for 2.4G / 12.0 dBi Omnidirectional antenna for 2.4G / 10.5 dBi Compliance Certification Services Inc. Report No: 50906003 Date of Issue: October 21, 2005 Page 4 Rev.00 Omnidirectional antenna for 2.4G / 5.2 dBi Omnidirectional Panel antenna for 2.4G and 5G / 3.0 dBi Compliance Certification Services Inc. Report No: 50906003 Date of Issue: October 21, 2005 Page 5 Rev.00 Omnidirectional antenna for 5G / 6.0 dBi

Compliance Certification Services Inc. Report No: 50906003 Date of Issue: October 21, 2005 Page 6 Rev.00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No: 50906003 Date of Issue: October 21, 2005 Page 7 Rev.00

HyperGain® HGV-2410U 2.4 GHz 10.5 dBi Omnidirectional Antenna High Performance The HyperGain® Model HGV-2410U is and economical yet high performance omnidirectional antenna designed for the 2.4 GHz ISM band. This compact and lightweight antenna is ideally suited for IEEE 802.11b/g wireless LANs, Bluetooth and other multipoint applications where wide coverage is desired. Versatile and Economical This antenna features an integral N-Female connector that mounts directly to the included bracket and U-bolts, allowing installation on masts up to 2.0" in diameter. Electrical Specifications Model HGV-2410U Frequency 2400-2500 MHz Gain 10.5 dBi Polarization Vertical Vertical Beam Width 8° Horizontal Beam Width 360° Impedance 50 Ohm Max. Input Power 50 Watts VSWR < 1.5:1 avg. Weight 1.45 lbs. (0.66 kg) Length 40.25 in. (1.02 m) Radome Material Gray Fiberglass Mounting 2.0" diameter mast max. Wind Survival >150 MPH Operating Temperature -45° C to +80° C Connector Integral N-Type Female Guaranteed Quality All HyperGain ® antennas are backed by Hyperlink’s Limited Warranty. e-mail: [email protected] • tel: 561-995-2256 • fax: 561-995-2432 web: www.hyperlinktech.com • 1201 Clint Moore Road • Boca Raton FL 33487

71 XtremeWave™ MFB Series XtremeWave™ Models 25007 (MMDS), MFB58009 (5.8 GHz ISM) and MFB19008A (PCS), MFB24006 and MFB24008 (2.4 GHz ISM) Antennas XtremeWave™ MFB24012 MFB24010 and MFB24012 An ISO-9001 Registered Company General Specifications: Omnidirectional base station antennas Radome Material: UV resistant pultruded fiberglass Polarization: Vertical Nominal Impedance: 50 Ohms Mounting Base Diameter: 1.25 inches (all models except MFB24012) 1.5 inches (model MFB24012) Mounting Method (sold separately): MMK1924 – L-bracket mount for wall or pipe mount (all models, except MFB24010 and MFB24012) MMK8 - Aluminum extruded bracket for mast mounting (all models, except model MFB24012) MMK11 - Ceiling mount bracket (for MFB24004, MFB24006 and MFB24008 only) MMK12 - Heavy duty bracket for mast mounting the MFB24012 MMK14 - Light duty mounting clamp for MFB24012 Termination: N female standard with all models, except MFB24012 and MFB58009PTNM N female, reverse polarity and reverse threaded connectors optional 16” RG-213 pigtail with N female connector for model MFB24012 only 5’ LMR400 pigtail with N male connector for model MFB58009PTNM only Features and Benefits: •UV stable, pultruded fiberglass radome. Allows outdoor installation even in harsh climates. •Vented system design. Provides reliable performance by protecting the electrical design against extreme moisture and/or temperatures. •Thread relief on connector (all models, except MFB24012 and MFB58009PTNM which have pigtails). Improved accessibility for taping reduces installation time and improves overall effectiveness. •Internal o-ring seal in the base of the antenna with integrated connector at the base. Assures a watertight seal to prevent water from migrating into the antenna connector (all models, except MFB24012 which has a pigtail). •Electrical downtilt options on select models. Provide system planners flexibility in challenging operating environments. The MAXRAD XtremeWave™ wireless broadband omnidirectional antennas are designed to provide maximum performance and reliability under the toughest weather conditions. These antennas feature a UV stable, vented radome that provides ultimate protection against weather elements. The line includes MMDS, ISM, UNII and PCS models with gains ranging from 4 to 12 dBi. These antennas can be mast, wall or ceiling mounted. PCS, 2.4 GHz ISM, MMDS and 5.8 GHz ISM/UNII Omnidirectional Base Station Antenna Series ORDER (800) 323-9122 FAX (630) 372-8077 www.maxrad.com An ISO-9001 Registered Company Patterns 10 190 20 200 30 210 40 220 50 230 60 240 70 250 80 260 90 270 100 280 110 290 120 300 130 310 140 320 150 330 160 340 170 350 1800 −20−20−15−15−10−10−5−500551010 MFB24012 Elevation Cut

48 Perimeter Rd. Manchester, NH (603)627-7877 fax..(603)627-1764 [email protected] WWW.CUSHCRAFT.COM WWW.CUSHCRAFT.COM • 6.0 dBi Gain • Slim aspect 11.5”x 1” • 5150-5875 MHz frequency range H-PLANE E- PLANE Product Technical Specifications Frequency (GH ): Gain (dBi): E-Plane (3 dB beamwidth): H-Plane (3 dB beamwidth): Polarization: Weight (Antenna Only) lb.(kg): VSWR: Mounting Style: Dimensions (inch): Pigtail: Enclosure: Power (Watts): RF Connector: 5.150 - 5.875 6 (nominal) 17º Omnidirectional Linear Vertical 0.3 (.14) 2:1 Beam, Mast, Ceiling 11.5 x 1.0 Acrylic / PVC 10 SMA 12” 5.150-5.875 GH Wide-Band Omni Antenna Z Cushcraft's S5153WBPX omni antenna provides wide-band and high-gain performance in the 5.150 to 5.875 GHz band. The antenna is designed to be both aesthetically complimentary to indoor environments and robust enough for the most demanding outdoor environments. These characteristics give system integrators a single antenna that can be used in a wide variety of and point-to-multipoint applications. Its wide bandwidth capability covers UNI I, II, and III frequencies, and worldwide WLAN standards. The antenna comes standard with drop Z S5153WBPX Wide-band Omni ceiling clip, I-beam clamp and mast mounting hardware all in one package, eliminating the need to stock and carry separate antennas for each This antenna configuration provides an excellent solution for system installers to build out seamless microcellular and picocellular sites quickly and efficiently. With a total weight of 5 ounces and measuring only 11.5”x 1”,this compact, high performance antenna provides coverage for large indoor open spaces, locations with high ceilings, and many places where extended coverage is needed. Warehouses, offices, healthcare facilities, educational or industrial campuses and shopping malls are just a few of the more common applications for this antenna design. • 6.0 dBi Gain • Slim aspect 11.5”x 1” • 5150-5875 MHz frequency range 345 0 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -30-20-10 dB 0 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -30-20-10 dB 345 application. S5153WBPX Wide-band Omni

Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 151 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For 802.11a/b/g AP Model: SS-200-AT Trade Name: AirTight Networks Issued to AirTight Networks, Inc 339N. Bernardo Avenue, Suite 200 Mountain View, CA 94043 Issued by Compliance Certification Services Inc. No. 81-1, Lane 210, Bade Rd. 2, Luchu Hsiang, Taoyuan Hsien, (338) Taiwan, R.O.C. http://www.ccsemc.com.tw [email protected] Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 2 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION........................................................................................................3 2. EUT DESCRIPTION..............................................................................................................................4 3. TEST METHODOLOGY.......................................................................................................................5 3.1 EUT CONFIGURATION........................................................................................................................5 3.2 EUT EXERCISE....................................................................................................................................5 3.3 GENERAL TEST PROCEDURES.............................................................................................................5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS........................................................6 3.5 DESCRIPTION OF TEST MODES...........................................................................................................7 4. INSTRUMENT CALIBRATION...........................................................................................................8 4.1 MEASUREMENT EQUIPMENT USED.........................................................................................8 5. FACILITIES AND ACCREDITATIONS ............................................................................................10 5.1 FACILITIES .......................................................................................................................................10 5.2 EQUIPMENT......................................................................................................................................10 5.3 LABORATORY ACCREDITATIONS AND LISTING................................................................................10 5.4 TABLE OF ACCREDITATIONS AND LISTINGS.....................................................................................11 6. SETUP OF EQUIPMENT UNDER TEST...........................................................................................12 6.1 SETUP CONFIGURATION OF EUT.......................................................................................................12 6.2 SUPPORT EQUIPMENT ...............................................................................................................12 7. FCC PART 15.247 REQUIREMENTS................................................................................................13 7.1 6DB BANDWIDTH.............................................................................................................................13 7.2 PEAK POWER....................................................................................................................................29 7.3 BAND EDGES MEASUREMENT ................................................................................................45 7.4 PEAK POWER SPECTRAL DENSITY....................................................................................................71 7.5 RADIO FREQUENCY EXPOSURE........................................................................................................87 7.6 SPURIOUS EMISSIONS ................................................................................................................95 7.7 POWERLINE CONDUCTED EMISSIONS.............................................................................................139 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP.................................................................................146 Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 4 Rev. 00 2. EUT DESCRIPTION Product 802.11a/b/g AP Trade Name AirTight Networks Model Number SS-200-AT Model Discrepancy N/A Power Supply DELTA / ADP-15KB I/P: AC 100-240V, 0.5A, 50-60Hz O/P: DC 5.1V, 3.0A Frequency Range IEEE 802.11a Base mode: 5.745~5.825 GHz Turbo mode: 5.760 GHz / 5.800 GHz IEEE 802.11b/g Base mode: 2.412~2.462 GHz IEEE 802.11g Turbo mode: 2.437 GHz b Base mode (dBm) g Base mode (dBm) g Turbo mode (dBm) a Base mode (dBm) a Turbo mode (dBm) Omnidirectional antenna / 12.0 dBi for 2.4 GHz 19.68 14.76 16.1 Omnidirectional Panel antenna / 3.0 dBi for 2.4 GHz and 5 GHz 21.64 19.9 20.18 19.63 19.72 Tr a n s mi t P ow er Omnidirectional antenna / 6.0 dBi for 5 GHz 19.63 19.72 Modulation Technique IEEE 802.11a: OFDM (QPSK, BPSK, 16-QAM, 64-QAM) IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: DSSS (CCK, DQPSK, DBPSK) + OFDM (QPSK, BPSK, 16-QAM, 64-QAM) Transmit Data Rate IEEE 802.11a: 108, 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11b: 11, 5.5, 2, 1 Mbps IEEE 802.11g: 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1Mbps Number of Channels IEEE 802.11a Base mode: 5 Channels Turbo mode: 2 Channels IEEE 802.11b/g Base mode: 11 Channels IEEE 802.11g Turbo mode: 1 Channel Enclosure Material Type Metal Antenna Specification The EUT comes with fi…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 91 Rev. 00 EUT 802.11a/b/g AP Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power IEEE 802.11a Base mode: 19.63 dBm (91.83mW) IEEE 802.11a Turbo mode: 19.72 dBm (93.76mW) Antenna gain (Max) 3.0 dBi (Numeric gain: 2.00) Evaluation applied MPE Evaluation SAR Evaluation Remark: 1. The maximum output power is 19.72dBm (93.76mW) at 5800MHz (with 2.00 numeric antenna gain.) 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance. 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger. TEST RESULTS No non-compliance noted. Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 92 Rev. 00 Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure EUT output power = 93.76mW Numeric Antenna gain = 2.00 Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Æ Power density = 0.03732 mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.) Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 93 Rev. 00 Omnidirectional antenna / 6.0 dBi for 5 GHz EUT 802.11a/b/g AP Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power IEEE 802.11a Base mode: 19.63 dBm (91.83mW) IEEE 802.11a Turbo mode: 19.72 dBm (93.76mW) Antenna gain (Max) 6.0 dBi (Numeric gain: 3.98) Evaluation applied MPE Evaluation SAR Evaluation Remark: 1. The maximum output power is 19.72dBm (93.76mW) at 5800MHz (with 3.98 numeric antenna gain.) 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance. 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger. TEST RESULTS No non-compliance noted. Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 94 Rev. 00 Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure EUT output power = 93.76mW Numeric Antenna gain = 3.98 Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Æ Power density = 0.07426 mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.) Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 95 Rev. 00 7.6 SPURIOUS EMISSIONS 7.6.1 Conducted Measurement LIMIT According to §15.247(d), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see Section 15.205(c)). Test Configuration TEST PROCEDURE Conducted RF measurements of the transmitter output were made to confirm that the EUT antenna port conducted emissions meet the specified limit and to identify any spurious signals that require further investigation or measurements on the rad…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 146 Rev. 00 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP Conducted Emission Setup Photos Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 147 Rev. 00 Radiated Emission Setup Photos Antenna: Omnidirectional antenna / 12.0 dBi Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC ID: TORSS-200-AT Date of Issue: October 21, 2005 Page 148 Rev. 00 Antenna: Omnidirectional Panel antenna / 3.0 dBi Antenna: Omnidirectional antenna / 6.0 dBi Compliance Certification Services Inc. Report No.: 50906003-RP1 FCC …

Text truncated - open the document above for the full version.