TQ4XC2900-F6CHandheld RFID Reader with WiFi transmitter

Thank you for using Invengo XC2900-F6C Handheld RFID Reader! Preface This manual applies to the XC2900-F6C Handheld RFID Reader manufactured by Invengo. This manual provides the information on the XC2900-F6C’s installation, operation, maintenance and repair and other features, to the personnel for installation, operation and maintenance of this XC2900-F6C. The word Invengo and are either trademark or registered trademark of Invengo Information Technology Co., Ltd. The information contained herein is provided solely for the purpose of allowing users to operate and service Invengo-manufactured XC2900-F6C, and is not to be released, reproduced, or used for any other purpose without written permission of Invengo Information Technology Co., Ltd. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Invengo. The features offered by the XC2900-F6C may vary depending on the configurations. Main Contents Overview Features Dimensions & Weight Structure Characteristics & Operation Principle Frequently Used Functions & Settings Introducing Optional Modules Introducing RFID Modules Notes Maintaining & Troubleshooting the XC2900-F6C Transport and storage Package & Unpacking the XC2900-F6C After Sale Service Safety Instructions Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Invengo equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the cautions. Warning A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons operating on the equipment. Notice A Note either provides: extra information about a topic or alerts to an operating procedure, practice, condition, or statement or corruption or loss of data, or contains special instructions for handling a particular condition or set of circumstances. Contents 1.Before You Begin ...................................................................................... 1 1.1.Introducing the XC2900-F6C ......................................................... 1 1.2.Model information .......................................................................... 1 1.3.Applications.................................................................................... 1 1.4.General requirements .................................................................... 2 1.5.Safety and precautions .................................................................. 2 2.Features ..................................................................................................... 3 3.Dimensions & Weight ................................................................................ 4 3.1.Dimensions .................................................................................... 4 3.2.Weight ............................................................................................ 4 4.Structure & Operating Principles ............................................................... 6 4.1.Components & Operating Principles ............................................. 6 4.1.1.Components................................................................................... 6 4.1.2.Understanding the panel ............................................................... 8 4.1.3.Understanding the LEDs ............................................................... 9 4.1.4.Understanding the keys ............................................................... 10 5.Configuring the XC2900-F6C .................................................................. 11 5.1.Screen Calibration ....................................................................... 11 5.2.Query battery power Info & backlight control .............................. 11 5.3.Volume & sound .......................................................................... 12 5.4.Install USB driver and synchronize data ..................................... 13 5.5.Understanding the keypad ........................................................... 16 5.6.Configuring power management scheme.................................... 17 5.7.Modules power control................................................................. 18 5.8.Set auto start................................................................................ 20 5.9.Set “quick launch program” ......................................................... 20 5.10.Power-down protection ................................................................ 21 6.Introducing Optional Modules .................................................................. 22 6.1.Wi-Fi modules .............................................................................. 22 6.2.Barcode module ........................................................................... 24 6.2.1.Barcode engine specs & supported formats ............................... 24 6.2.2.Read barcode with module .......................................................... 24 6.2.3.Read barcode with Demo ............................................................ 26 7.Introducing RFID Module......................................................................... 29 7.1.Understanding RFID module ....................................................... 29 7.1.1.Brief introduction .......................................................................... 29 7.1.2.Specifications ............................................................................... 29 7.2.Introducing Demo ........................................................................ 29 7.2.1.Demo application environment .................................................... 29 7.2.2.Installing & launching Demo ........................................................ 29 7.2.3.Running demo.............................................................................. 30…

Text truncated - open the document above for the full version.

External Photos of XC2900-F6C RFID Antenna WIFI Antenna

Label Location Label location

XC2900-F6C Internal Photos 、 、 WIFI Module WIFI Antenna RFID Module RFID Antenna

Report Number: 68.760.11.324.01 Page 1 of 30 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 FCC- TEST REPORT Report Number : 68.760.11.324.01 Date of Issue: 16 November 2011 Model : XC2900-F6C Product Type : XC2900-F6C Handheld RFID Reader Applicant : Invengo Information Technology Co., Ltd. Address : 3/F, No. T2-B, High-tech Industrial Park South, Shenzhen 518057, China Production Facility : Invengo Information Technology Co., Ltd. Address : Invengo RFID Industrial Park, Guangming Hi-Tech Zone, Tongguan : Road, Guangming New District, Shenzhen, Guangdong 518100, PRC Test Result :  Positive  Negative Total pages including Appendices : 30 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from Jiangsu TÜV Product Service Ltd. – Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 68.760.11.324.01 Page 2 of 30 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 1 Table of Contents 1 Table of Contents............................................................................................ 2 2 Details about the Test Laboratory..................................................................... 3 3 Description of the Equipment Under Test........................................................... 4 4 Summary of Test Standards............................................................................ 5 5 Summary of Test Results................................................................................ 6 6 General Remarks.......................................................................................... 7 7 Technical Requirements.............................................................................. 8 7.1 Conducted Emission AC Power Port........................................................ 8 7.2 Radiated emissions............................................................................ 18 8 System Measurement Uncertainty................................................................... 20 Report Number: 68.760.11.324.01 Page 3 of 30 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 2 Details about the Test Laboratory Details about the Test Laboratory Test site1: Company name: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6th Floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District 518048, Shenzhen,P.R.C. Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Test site2: Company name: Shenzhen Emtek Co., Ltd., Bldg. 69, Majialong Industry Zone, Nanshan District, Shenzhen, China Telephone: 86 755 26954280 Fax: 86 755 26954282 Report Number: 68.760.11.324.01 Page 4 of 30 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 3 Description of the Equipment Under Test Description of the Equipment Under Test Product: XC2900-F6C Handheld RFID Reader Model no.: XC2900-F6C Brand Name: Invengo Options and accessories: NIL Rating: DC 3.7V (Supplied by battery 1500mAh, or Charged by external adapter: Adaptor Model No.: FSP020-DGAA1 Adaptor Input: 100-240VAC, 50-60Hz, 1.0A Adpator Ouput: 5.0VDC, 4.0A Max) Description of the EUT: NIL Auxiliary Equipment and Cable Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) PC LENOVO 9702 L3C4410 (Unshielded, 1.5m) LCD Monitor LENOVO 9227-AE6 4M0293084302824 (Unshielded, 1.5m) Keyboard LENOVO KU-0225 0585494 (Unshielded, 2.0m) Mouse LENOVO MO28UOL 44G7862 068 (Unshielded, 2.0m) USB Disk aigo L8206 XMD742174201210 SD Card Apacer AP1GSD60 210750400000 Report Number: 68.760.11.324.01 Page 5 of 30 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 4 Summary of Test Standards Test Standards FCC Part 15 Subpart B PART 15 - RADIO FREQUENCY DEVICES Subpart B - Unintentional Radiators Report Number: 68.760.11.324.01 Page 6 of 30 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart B Test Location Test Condition Pages Test Result Pas s Fail N/A Test Site2 15.107 Conducted Emission AC Power Port 8 Test Site2 15.109 Spurious radiated em…

Text truncated - open the document above for the full version.

Page 1 of 4 Test setup photos of XC2900-F6C 1. Conducted Emission Test setup Downloading mode: USB Playing mode: Page 2 of 4 SD Card Playing mode: Memory playing mode: Page 3 of 4 2. Radiated Emission Test (Blow 1GHz) Downloading mode: USB Playing mode Page 4 of 4 SD Card Playing mode Memory playing mode: