TQ8-AC1B0SBANDIGITAL CAR AUDIO SYSTEM

41 Features of your vehicle D300800AHM How vehicle audio works AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best pos- sible quality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors such as the dis- tance from the radio station, closeness of other strong radio stations or the pres- ence of buildings, bridges or other large obstructions in the area. AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low frequency radio waves can fol- low the curvature of the earth rather than travelling straight out into the atmos- phere. In addition, they curve around obstructions so that they can provide bet- ter signal coverage. ¢¢¢¢¢¢ JBM002 AM reception ¢¢¢ JBM001 FM reception Features of your vehicle 24 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by build- ings, mountains, or other obstructions. These can result in certain listening con- ditions which might lead you to believe a problem exists with your radio. The fol- lowing conditions are normal and do not indicate radio trouble: • Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station. • Flutter/Static - Weak FM signals or large obstructions between the trans- mitter and your radio can disturb the signal causing static or fluttering nois- es to occur. Reducing the treble level may lessen this effect until the distur- bance clears. • Station Swapping - As a FM signal weakens, another more powerful sig- nal near the same frequency may begin to play. This is because your radio is designed to lock onto the clear- est signal. If this occurs, select another station with a stronger signal. • Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflect- ed signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed. JBM005 ¢¢¢ JBM004JBM003 FM radio station 43 Features of your vehicle Satellite radio reception You may experience difficulties in receiv- ing XM™ satellite radio signals in the fol- lowing situations. • If you are driving in a tunnel or a cov- ered parking area. • If you are driving beneath the top level of a multi-level freeway. • If you drive under a bridge. • If you are driving next to a tall vehicle (such as a truck or a bus) that blocks the signal. • If you are driving in a valley where the surrounding hills or peaks block the signal from the satellite. • If you are driving on a mountain road where is the signal blocked by moun- tains. • If you are driving in an area with tall trees that block the signal (30 ft. /10m or more), for example on an road that goes through a dense forest. • The signal can become weak in some areas that are not covered by the XM™ repeater network. NOTE: There may be other unforeseen cir- cumstances leading to reception prob- lems with the XM™ satellite radio sig- nal. SATELLITE2 SATELLITE1 Features of your vehicle 44 Using a cellular phone or a two-way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio equipment. This does not mean that something is wrong with the audio equipment. In such a case, use the cellu- lar phone at a place as far as possible from the audio equipment. Care of disc • If the temperature inside the car is too high, open the car windows for ventilation before using your car audio. • It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means. • Do not apply volatile agents such as benzene and thinner, normal cleaners and magnetic sprays made for ana- logue disc onto CDs. • To prevent the disc surface from get- ting damaged. Hold and carry CDs by the edges or the edges of the center hole only. • Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge). • Do not damage the disc surface or attach pieces of sticky tape or paper onto it. • Make sure on undesirable matter other than CDs are inserted into the CD player (Do not insert more than one CD at a time). • Keep CDs in their cases after use to protect them from scratches or dirt. • Depending on the type of CD-R/CD- RW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, if you still continue to use those CDs, they may cause the malfunction of your car audio system. ✽✽ NOTICE- Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with the international audio CD standards (Red Book), may not play on your car audio. Please note that if you try to play copy protected CDs and the CD player does not perform correctly the CDs maybe defective, not the CD player. CAUTION When using a communication sys- tem such a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehi- cle's electrical system and adverse- ly affect safe operation of the vehi- cle. WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. 45 Features of your vehicle RB_PA710RB_RADIO ■■ C…

Text truncated - open the document above for the full version.

HYUNDAI MOBIS CO., LTD. 80-9, Mabook-Dong, Giheung-Gu, Yongin-shi, Gyunggi-Do, 446-912, South Korea Date: July 22, 2013 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

HYUNDAI MOBIS CO., LTD. 80-9, Mabook-Dong, Giheung-Gu, Yongin-shi, Gyunggi-Do, 446-912, South Korea Date: July 22, 2013 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: TQ8-AC1B0SBAN To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, HYUNDAI MOBIS CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give HYUNDAI MOBIS CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 Part Lists SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Jong Tae Kim Director

HYUNDAI MOBIS CO., LTD. 80-9, Mabook-Dong, Giheung-Gu, Yongin-shi, Gyunggi-Do, 446-912, South Korea Date: July 22, 2013 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA LETTER OF AUTHORIZATION We, the undersigned, hereby authorize Harvey Sung of Digital EMC Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: TQ8-AC1B0SBAN including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of Digital EMC Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from HYUNDAI MOBIS CO., LTD. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Jong Tae Kim Director

FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 1 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 2 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 3

FCC ID: TQ8-AC1B0SBAN Copyright Ⓒ 2013, Digital EMC Co., Ltd. SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase Label locate Top side This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page1 / 7 View 1 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page2 / 7 View 2 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page3 / 7 View 3 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page4 / 7 View 4 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page5 / 7 View 5 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page6 / 7 View 6 FCCID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page7 / 7 Antenna

-~ - - The MPE calculation for this exposure is shown below. The peak radiated output power (EIRP) is calculated as follows: ▪=+- =+ = - ▪S=- =X = mW/cm 2 FCCID: TQ8-AC1B0SBAN MPE Calculations Frequency range :2402MHz2480MHz 3.95dBm -5.03dBi Maximum RF output power : Maximum antenna peak gain : The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the user. EIRPPGNote 3.95dBm-5.03dBiP = Power input to the antenna(dBm) -1.08dBmG = Power gain of the antenna(dBi) Power density at the specific separation P G / ( 4 R 2 π ) Note 2.48 0.314 / ( 4 X 20 2 X π )S = Maximum power dencity(mW/cm 2 ) 0.00016 mW/cm 2 P = Power input to the antenna(mW) G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna(20cm) Conclusion : N/A (The EIRP is below the limit.) The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.61 TRF-RF-206(00)100216

DEMC1307-02049, DEMC1307-02050 FCC ID: TQ8-AC1B0SBAN Report No.: DRTFCC1307-0703 IC: 5074A-AC1B0SBKN TRF-RF-212(00)101214 Page2 / 73 Copyright ○ C 2013, Digital EMC Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1307-0703 Jul. 24, 2013 Initial issue DEMC1307-02049, DEMC1307-02050 FCC ID: TQ8-AC1B0SBAN Report No.: DRTFCC1307-0703 IC: 5074A-AC1B0SBKN TRF-RF-212(00)101214 Page3 / 73 Copyright ○ C 2013, Digital EMC Co., Ltd. Table of Contents 1.General Information ................................................................................................................ 4 1.1 Testing Laboratory ......................................................................................... 4 1.2 Details of Applicant ........................................................................................ 4 1.3 Description of EUT ......................................................................................... 4 1.4. Declaration by the manufacturer .................................................................... 4 1.5. Information about the FHSS characteristics: ................................................ 5 1.6. Test Equipment List ........................................................................................ 6 1.7. Summary of Test Results ................................................................................ 7 1.8 Conclusion of worst-case and operation mode .............................................. 8 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission ............ 9 2.1. Test Setup ........................................................................................................ 9 2.2. Limit .................................................................................................................. 9 2.3. Test Procedures............................................................................................. 10 2.3.1. Test Procedures for Radiated Spurious Emissions................................ 10 2.3.2. Test Procedures for Conducted Spurious Emissions ............................ 10 2.4. Test Results ................................................................................................... 11 2.4.1. Radiated Emission .................................................................................... 11 2.4.2. Conducted Spurious Emissions .............................................................. 14 3. Carrier Frequency Separation............................................................................................. 32 3.1.Test Setup ..................................................................................................... 32 3.2. Limit ................................................................................................................ 32 4. Number of Hopping Frequencies ....................................................................................... 37 4.1. Test Setup..................................................................................................... 37 4.2. Limit ................................................................................................................ 37 5. 20dBc BW .............................................................................................................................. 46 5.1. Test Setup ...................................................................................................... 46 5.2. Limit ................................................................................................................ 46 5.3. Test Procedure .............................................................................................. 46 5.4. Test Results ................................................................................................... 46 6. Time of Occupancy (Dwell Time) ........................................................................................ 52 6.1. Test Setup ...................................................................................................... 52 6.2. Limit ................................................................................................................ 52 6.3. Test Procedure .............................................................................................. 52 6.4. Test Results ................................................................................................... 52 7. Maximum Peak Output Power Measurement .................................................................... 57 7.1. Test Setup ...................................................................................................... 57 7.2. Limit ................................................................................................................ 57 7.3. Test Procedure ............................................................................................... 57 7.4. Test Results ................................................................................................... 58 8. Transmitter AC Power Line Conducted Emission ............................................................ 64 8.1. Test Setup ...................................................................................................... 64 8.2. Limit ................................................................................................................ 64 8.3. Test Procedures ............................................................................................. 64 8.4. Test Results ................................................................................................... 64 9. Antenna Requirement .......................................................................................................... 65 10. Occupied Bandwidth(99%) ................................................................................................ 66 APPENDIX I ...................................................................................…

Text truncated - open the document above for the full version.

FCC ID: TQ8-AC1B0SBAN IC: 5074A-AC1B0SBKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo