TQ8-ADC10SVGGDIGITAL CAR AUDIO SYSTEM

1 Car Infotainment System User's Manual [This guide covers specifications for all vehicle models, including optional specifications, and is based on the latest version of system software. [Your system's functions and specifications are subject to change without prior notice for performance improvement. [The functions and services described in this guide are subject to change without prior notice for performance improvement. If the system software is updated, the screenshots in this guide may appear different than the actual images on the system. [You can view the up-to-date information about changed functions and services from the web manual. [The functions and services described in this guide may differ from those provided in your vehicle. For precise information related to your vehicle, refer to the owner's manual or catalogue of your vehicle. [Your system is not compatible with the system software for regions outside of the country of purchase. Available information for users Car Infotainment System Quick Reference Guide (Print) This guide contains basic information to use your system including component names and functions. To use your system correctly and safely, read this guide before use. Car Infotainment System User's Manual (Web) This guide is a web manual you can access by scanning a QR code in the Quick Reference Guide or on your system′s screen. This guide introduces your system's functions and explains how to use them. 2 Symbols used in this guide Warning Indicates important information related to user safety. Failure to follow warnings may result in death or serious personal injury. Caution Indicates important information related to user safety. Failure to follow cautions may result in personal injury, or damage or malfunction your vehicle. Note Indicates helpful information for convenient use. (if equipped) Indicates descriptions for optional features, which may not be available on your specific vehicle depending on the model or trim level. This guide covers specifications for all vehicle models, including optional specifications. It may include descriptions for features that are not equipped in your vehicle or are unavailable for your vehicle model. Safety warnings For safety, follow the instructions below. Failure to do so may increase the risk of a traffic accident, which may result in death or personal injury. ÜAbout driving Do not operate the system while driving. •Driving while distracted may result in a loss of vehicle control, potentially leading to an accident, severe personal injury, or death. The driver′s primary responsibility is the safe and legal operation of a vehicle, and any handheld devices, equipment, or vehicle systems which divert the driver′s attention from this responsibility should never be used during operation of the vehicle. Avoid watching the screen while driving. •Driving while distracted may lead to a traffic accident. •Stop your vehicle in a safe location before using functions that require multiple operations. Stop your vehicle first before using your mobile phone. •Using a mobile phone while driving may lead to a traffic accident. •If necessary, use the Bluetooth Handsfree feature to make calls and keep the call as short as possible. Keep the volume low enough to hear external sounds. •Driving without the ability to hear external sounds may lead to a traffic accident. •Listening to a loud volume for a long time may cause hearing damage. 3 ÜAbout handling the system Do not disassemble or modify the system. •Doing so may result in an accident, fire, or electric shock. Do not allow liquids or foreign substances to enter the system. •Liquids or foreign substances may cause noxious fumes, a fire, or a system malfunction. Stop using the system if it malfunctions, such as no audio output or display. •If you continue using the system when it is malfunctioning, it may lead to a fire, electric shock, or system failure. ÛNote If you experience any problems with the system, contact your place of purchase or dealer. Safety cautions For safety, follow the instructions below. Failure to do so may result in personal injury or damage to the system. ÝAbout operating the system Use the system with the engine running. •Using the system for a long time when the engine is stopped may discharge the battery. Do not install unapproved products. •Using unapproved products may cause an error while using the system. •System errors caused by installing unapproved products are not covered under the warranty. ÝAbout handling the system Do not apply excessive force to the system. •Excessive pressure on the screen may damage the LCD panel or the touch panel. When cleaning the screen or button panel, make sure to stop the engine and use a soft, dry cloth. •Wiping the screen or buttons with a rough cloth or using solvents (alcohol, benzene, paint thinner, etc.) may scratch or chemically damage the surface. If you attach a liquid-type air freshener to the fan louvre, the surface of the louvre may become deformed due to the flowing air. ÛNote If you experience any problems with the system, contact your place of purchase or dealer. This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. 4 1 System overview Component names and functions 1-2 Control panel 1-2 Steering wheel remote control 1-4 Turning the system on or off 1-5 Turning on the system 1-5 Turning off the system 1-6 Using the touch screen 1-6 Getting to know the Home screen 1-8 Getting familiar with the Home screen layout 1-8 Changing the Home screen widgets 1-9 Changing the Home screen menu icons 1-9 Getting to know the All menus screen 1-10 Getting familiar with the All menus screen layout 1-10 Rearranging the All menus screen 1-10 Using Favourites 1-11 Adding favourite items 1-11 Rearranging the items in favourites 1-11 Deleting favourite items 1-11 2 Useful functions Using phone projection 2-2 Connecting your Android smartphone via Android Au…

Text truncated - open the document above for the full version.

HYUNDAI MOBIS CO., LTD. 203 Teheran-ro, Gangnam-gu, Seoul, Korea, 135-977 Date: Jan 09, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Letter of A uthorization We, the undersigned, hereby authorize Guenki Son of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: TQ8-ADC10SVGG including signing of all documents relating to these matters. Any and all acts carried out by Guenki Son of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from HYUNDAI MOBIS CO., LTD. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Seung Hoon Choe Manager

HYUNDAI MOBIS CO., LTD. 203 Teheran-ro, Gangnam-gu, Seoul, Korea, 135-977 Date: Jan 09, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA RE: Request of Confidentiality for FCC ID: TQ8-ADC10SVGG To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, HYUNDAI MOBIS CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give HYUNDAI MOBIS CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description SHORT-TERM 5 Internal Photos 6 External Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Seung Hoon Choe Manager

FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 1 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 2 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 3

Model Name: ADC10SVGG SAMPLE LABEL & LOCATION MODEL: ADC10SVGG 14.4 V 4 Ω10 A AM 531 ~ 1602 kHz MADE IN INDIA This device complies with part 15 of the FCC Rules. O peration is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. UNDER LICENSE OF STAAR S.A. , BRUXELLS BELGIUM: DOLBY NOISE REDUCTION MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES LICENSING CORPORATION. "DOLBY" AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES LICENSING CORPORATION MANUFACTURED : HYUNDAI MOBIS CO., LTD. Copyright Ⓒ 2019, DT&C Co., Ltd. FM 87.5 ~ 108 MHz FCC ID: TQ8-ADC10SVGG

FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 1 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 2 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 3 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 4 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 5 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 6 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 7 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 8 <Module> <Module> FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 9 <Module> <Module> FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 10 FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 10 <Antenna> FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 11 <Antenna> FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. View 12 <Antenna>

FCC ID: RF function or Mode Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum powe r density (mW/cm 2 ) Requriment (mW/cm 2 ) Bluetooth(1Mbps) 2402.00 ~ 2480.00 1.00 -0.18 0.82 1.208 0.0003 1.000 Bluetooth(2,3Mbps) 2402.00 ~ 2480.00 -3.00 -0.18 -3.18 0.481 0.0001 1.000 ~~~~~~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averageing time (minutes) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : ▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 1.208 S= Maximum power density(mW/cm 2 ) 0.0003 EIRP= Equivalent Isotropic Radiated Power(mW)R= Distance to the center of the radiation of the anten n TQ8-ADC10SVGG MPE Calculation : Bluetooth Frequency range (MHz) The EUT will only be used with a separation of 20 centimeters o r greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below.Note: Please refer to the operation description for Max tune-up power. FCC ID: Mode(Worst case) Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum powe r density (mW/cm 2 ) Requriment (mW/cm 2 ) 802.11n 2412.00 ~ 2462.00 10.50 -0.01 10.49 11.195 0.0023 1.000 802.11a 5180.00 ~ 5240.00 9.00 -0.61 8.39 6.903 0.0014 1.000 802.11a 5260.00 ~ 5320.00 9.00 -0.18 8.82 7.621 0.0016 1.000 802.11a 5500.00 ~ 5720.00 7.00 -0.77 6.23 4.198 0.0009 1.000 802.11a 5745.00 ~ 5825.00 7.00 -0.18 6.82 4.809 0.0010 1.000 ~~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averageing time (minutes) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : TQ8-ADC10SVGG MPE Calculation : WLAN Frequency range (MHz) The EUT will only be used with a separation of 20 centimeters o r greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below.Note: Please refer to the operation description for Max tune-up power. ▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 6.903 S= Maximum power density(mW/cm 2 ) 0.001 EIRP= Equivalent Isotropic Radiated Power(mW)R= Distance to the center of the radiation of the anten n ▪▪ BT + WLAN(5GHz) 1.0000 WLAN 5GHz 0.0003 0.0016 0.0003 0.0016 MPE ratio (Power Density/Requirement) Band(Worst case) 0.0016 ----- RF function or mode(Worst case) 0.0019 BT Σ of MPE ratios 2.4GHz 0.0003 NII-2 Power Density (mW/cm2) - - -- Requirement (mW/cm2) 1.0000 Worst case(MPE ratio) The exposure condition of this device is compliant with FCC rul es. Conclusion : Σ of MPE ratios ≤ 1 ▪ Requirment = -- TQ8-ADC10SVGG FCC ID: RF Exposure Compliance for simultaneous operations Worst case for simultaneous operations

Report No.: DRTFCC1912-0307 FCC ID: TQ8-ADC10SVGG TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 2 / 76 Test Report Version Test Report No. Date Description DRTFCC1912-0307 Dec. 04, 2019 Initial issue Report No.: DRTFCC1912-0307 FCC ID: TQ8-ADC10SVGG TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 3 / 76 Table of Contents 1. General Information ............................................................................................................... 4 1.1 Testing Laboratory .......................................................................................................................... 4 1.2 Testing Environment ....................................................................................................................... 4 1.3 Measurement Uncertainty ............................................................................................................... 4 1.4 Details of Applicant ......................................................................................................................... 5 1.5 Description of EUT .......................................................................................................................... 5 1.6 Declaration by the applicant / manufacturer ................................................................................. 5 1.7 Information about the FHSS characteristics ................................................................................. 6 1.8 Test Equipment List ......................................................................................................................... 7 1.9 Summary of Test Results ................................................................................................................ 8 1.10 Conclusion of worst-case and operation mode .......................................................................... 9 2. Maximum Peak Output Power Measurement .................................................................... 10 2.1 Test Setup ...................................................................................................................................... 10 2.2 Limit ................................................................................................................................................ 10 2.3 Test Procedure ............................................................................................................................... 10 2.4 Test Results ................................................................................................................................... 11 3. 20 dB BW .............................................................................................................................. 17 3.1 Test Setup ...................................................................................................................................... 17 3.2 Limit ................................................................................................................................................ 17 3.3 Test Procedure ............................................................................................................................... 17 3.4 Test Results ................................................................................................................................... 17 4. Carrier Frequency Separation ............................................................................................ 23 4.1 Test Setup ...................................................................................................................................... 23 4.2 Limit ................................................................................................................................................ 23 4.3 Procedure ....................................................................................................................................... 23 4.4 Test Results ................................................................................................................................... 23 5. Number of Hopping Frequencies ....................................................................................... 28 5.1 Test Setup ...................................................................................................................................... 28 5.2 Limit ................................................................................................................................................ 28 5.3 Procedure ....................................................................................................................................... 28 5.4 Test Results ................................................................................................................................... 28 6. Time of Occupancy (Dwell Time) ........................................................................................ 34 6.1 Test Setup ...................................................................................................................................... 34 6.2 Limit ................................................................................................................................................ 34 6.3 Test Procedure ............................................................................................................................... 34 6.4 Test Results ................................................................................................................................... 34 7. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission .......... 39 7.1 Test Setup ...................................................................................................................................... 39 7.2 Limit ...............................................................…

Text truncated - open the document above for the full version.

Report No.: DRTFCC1912-0307 FCC ID: TQ8-ADC10SVGG TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 39 / 76 7. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission 7.1 Test Setup Refer to the APPENDIX I. 7.2 Limit According to §15.247(d), in any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval , as permitted under paragraph(b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in section §15.209(a) is not required. In addition, radiated emission which in the restricted band, as define in section §15.205(a), must also comply the radiated emission limits specified in section §15.209(a) (see section §15.205(c)) According to § 15.209(a), except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table Frequency (MHz) Limit (uV/m) Measurement Distance (meter) 0.009 ~ 0.490 2400/F (kHz) 300 0.490 ~ 1705 24000/F (kHz) 30 1705 ~ 30.0 30 30 30 ~ 88 100 ** 3 88 ~ 216 150 ** 3 216 ~ 960 200 ** 3 Above 960 500 3 ** Except as provided in 15.209(g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54 - 72 MHz, 76 - 88 MHz, 174 - 216 MHz or 470 - 806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g. 15.231 and 15.241. According to § 15.205(a) and (b), only spurious emissions are permitted in any of the frequency bands listed below : MHz MHz MHz MHz GHz GHz 0.009 ~ 0.110 0.495 ~ 0.505 2.1735 ~ 2.1905 4.125 ~ 4.128 4.17725 ~ 4.17775 4.20725 ~ 4.20775 6.215 ~ 6.218 6.26775 ~ 6.26825 6.31175 ~ 6.31225 8.291 ~ 8.294 8.362 ~ 8.366 8.37625 ~ 8.38675 8.41425 ~ 8.41475 12.29 ~ 12.293 12.51975 ~ 12.52025 12.57675 ~ 12.57725 13.36 ~ 13.41 16.42 ~ 16.423 16.69475 ~ 16.69525 16.80425 ~ 16.80475 25.5 ~ 25.67 37.5 ~ 38.25 73 ~ 74.6 74.8 ~ 75.2 108 ~ 121.94 123 ~ 138 149.9 ~ 150.05 156.52475 ~ 156.52525 156.7 ~ 156.9 162.0125 ~ 167.17 167.72 ~ 173.2 240 ~ 285 322 ~ 335.4 399.90 ~ 410 608 ~ 614 960 ~ 1240 1300 ~ 1427 1435 ~ 1626.5 1645.5 ~ 1646.5 1660 ~ 1710 1718.8 ~ 1722.2 2200 ~ 2300 2310 ~ 2390 2483.5 ~ 2500 2655 ~ 2900 3260 ~ 3267 3332 ~ 3339 3345.8 ~ 3358 3600 ~ 4400 4.5 ~ 5.15 5.35 ~ 5.46 7.25 ~ 7.75 8.025 ~ 8.5 9.0 ~ 9.2 9.3 ~ 9.5 10.6 ~ 12.7 13.25 ~ 13.4 14.47 ~ 14.5 15.35 ~ 16.2 17.7 ~ 21.4 22.01 ~ 23.12 23.6 ~ 24.0 31.2 ~ 31.8 36.43 ~ 36.5 Above 38.6 The field strength of emissions appearing within these frequency bands shall not exceed the limits shown in §15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in §15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in §15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in §15.35 apply to these measurements. Report No.: DRTFCC1912-0307 FCC ID: TQ8-ADC10SVGG TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 40 / 76 7.3. Test Procedures 7.3.1. Test Procedures for Radiated Spurious Emissions 1. The EUT is placed on a non-conductive table. For emission measurements at or below 1 GHz, the table height is 80 cm. For emission measurements above 1 GHz, the table height is 1.5 m. The table was rotated 360 degrees to determine the position of the highest radiation. 2. During performing radiated emission below 1 GHz, the EUT was set 3 meters away from the interference receiving antenna, which was mounted on the top of a variable-height antenna tower. During performing radiated emission above 1 GHz, the EUT was set 1 or 3 meter away from the interference-receiving antenna. 3. For measurements above 1GHz absorbers are placed on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections. For measurements below 1 GHz, the absorbers are removed. 4. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 5. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the table was turned from 0 degrees to 360 degrees to find the maximum reading. 6. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 7. If the emission level of the EUT in peak mode was 10 dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10 dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. Measurement Instrument Setting - Frequencies less than or equal to 1000 MHz The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 kHz for Quasi-peak detection (QP) at frequency below 1 GHz. - Frequencies above 1000 MHz The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz for Peak detection and frequency above 1 GHz. The result of Average measurement is ca…

Text truncated - open the document above for the full version.

FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. Test Setup photographs EUT Position: X-axis FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz) FCC ID : TQ8-ADC10SVGG Copyright Ⓒ 2019, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz)