TQ8-AMBA1B2ANDIGITAL CAR AUDIO SYSTEM

SYSTEM CONTROLLERSAND FUNCTIONS ❈ Display and settings may differ depending on the selected audio. Audio Head Unit (1) (EJECT) Ejects the disc (  ) Converts to Radio(FM/AM) mode.Each time the key is pressed, themode is changed in order of FM1 ➟ FM2 ➟ AM. (  ) Start Media modeEach time the key is pressed, themode is changed in order of USB(iPod ® ) AUX, My Music, BT Audio.(  ) Converts to Phone mode❈ When a phone is not connected, the connection screen is dis-played. (  ) PWR/VOL knob Power : Press to turn power on/off. Volume : Turn left / right to control volume. (  ) When pressed shortly(under 0.8seconds)- Radio mode : plays previous / next frequency. - Media ( USB / iPod ® / My Music /BT Audio) modes : changes thetrack, Song(file) When pressed and held (0.8 sec-onds)- Radio mode : continuously changes the frequency. Upon release, playsthe current frequency. - Media( USB / iPod ® / My Music) modes : rewinds or fast for-wards the track or file - During a Handsfree call, controls the call volume. SEEK TRACK PHONE MEDIARADIO ■ Type B-1 4 2 Features of your vehicle K_YP_B3.0_AUDIO_A9MS2H3E00:YF eng 4c-Audio.qxd 11/3/2014 6:05 PM Page 2 (7) • Each time the button is shortly pressed (under 0.8 seconds), setsscreen Off ➟ Screen On ➟ Screen Off ❈ Audio operation is maintained and only the screen will be turned Off.In the screen Off state, press anykey to turn the screen On again. (  ) When the button is pressed, stopss-ound and (MUTE ICON) is dis- played on LCD.(  ) • Radio Mode- Press the key (under 0.8 seconds): Previews each broadcast for 5 sec-onds each • Media ( USB / iP od / My Music) Mode - Press the key (under 0.8 seconds):Previews each song (file) for 10seconds each ❈ Press the ke y again to continue listening to the current song (file). ( ) Converts to Setup mode. ( ) TUNE knob - Radio mode : turn to change broadcast frequencies. - Media ( USB / iPod ® / My Music) Mode : turn to search tracks/channels/files. (1 ) MP3, USB mode : Folder Search❈ May differ depending on theselected audio SCAN DISP FOLDER SETUP 4 Features of your vehicle 3 K_YP_B3.0_AUDIO_A9MS2H3E00:YF eng 4c-Audio.qxd 11/3/2014 6:05 PM Page 3 PHONE (if equipped)Before using the Bluetooth ® Wireless Technology phone features • In order to use Bluetooth ® Wireless Technology phone, you must first pair and connect the Bluetooth ® Wireless Technology mobile phone. • If the mobile phone is not paired or connected, it is not possible toenter Phone mode. Once a phoneis paired or connected, the guid-ance screen will be displayed. • If Priority is set upon vehicle igni- tion (IGN/ACC ON), the Bluetooth ® Wireless Technology phone will be automatically connected. Even ifyou are outside, the Bluetooth ® Wireless Technology phone will be automatically connected once youare in the vicinity of the vehicle. If youdo not want automatic Bluetooth ® Wireless Technology phone connec- tion, set the Bluetooth ® Wireless Technology power to OFF. Making a call using theSteering remote controller(1) button : Mute the micro- phone during a call. (2) , button : Raises or low- ers speaker volume. (3) b utton : Places and transfers calls. (4) b utton : Ends calls or cancels functions. • Check call history and making call➀ Shortly press (under 0.8 seconds) the key on the steering remote controller. ➁ The call history list will be dis- played on the screen. ➂ Press the key again to con- nect a call to the selected number. • Redialing the most recently called number ➀ Press and hold (over 0.8 seconds) the key on the steering remote controller. ➁ The most recently called number is redialed. - + MUTE 4 Features of your vehicle 9 K_YP_B3.0_AUDIO_A9MS2H3E00:YF eng 4c-Audio.qxd 11/3/2014 6:05 PM Page 9 RADIO MODE Type B-1,Type B-2(except Colombia model)Basic Mode Screen (1) Mode DisplayDisplays currently operating mode(2) FrequencyDisplays the current frequency(3) PresetDisplays current preset number [1] ~[6](4) Preset DisplayDisplays preset buttons(5) Auto storeAutomatically saves frequencies withsuperior reception to Preset buttons Switching to Radio Mode(Type B-1)Pressing the key will change the operating mode in order of FM1➟ FM2 ➟ AM (Type B-2)Pressing the key will change the operating mode in order of FM1 ➟ FM2Pressing the key will change the operating AM mode If [Mode Pop-up] is turned on within [Display], then pressing the key will display the Radio Pop-up Mode screen.Turn the TUNE knob to move the focus. Press the knob to select . AM FM SETUP RADIO RADIO 4 10 Features of your vehicle K_YP_B3.0_AUDIO_A9MS2H3E00:YF eng 4c-Audio.qxd 11/3/2014 6:05 PM Page 10 Searching Radio FrequenciesUsing SeekPress the key to play the previous/next frequency.Using TUNETurn the TUNE knob to select the desired frequency. Using Radio ModeSelecting /Saving PresetsPress the button to display the broadcast information for the fre-quency saved to each button.Press the ~ buttons to play the desired preset.✽ NOTICE While listening to a frequency youwant to save as a preset, press andhold one of the [1] ~ [6] preset but-tons (over 0.8 seconds) to save thecurrent frequency to the selectedpreset. Auto StorePress the button to auto- matically save receivable frequen-cies to Preset buttons.ScanPress the key to preview fre- quencies with superior reception for5 seconds each.Press and hold the key (over 0.8 seconds) to preview presets for 5seconds each. ✽ NOTICE • Once scan is complete, the previ- ous frequency will be restored. • While Scan is operating, pressing the key will cancel the scan operation. SCAN SCAN SCAN Auto store 6 1 Preset SEEK TRACK 4 Features of your vehicle 11 K_YP_B3.0_AUDIO_A9MS2H3E00:YF eng 4c-Audio.qxd 11/3/2014 6:05 PM Page 11 Features of your vehicle 12 4 RADIO MODE (for RDS model)Type B-1, Type B-2(for Colombia model), Type B-3,Type B-4Basic Mode Screen (1) Mode DisplayDisplays currently operating mode(2) FrequencyDisplays the current frequency(3) PresetDisplays current preset number [1] ~[6](4) Preset DisplayDisplays saved presets(5) Auto storeA…

Text truncated - open the document above for the full version.

HYUNDAI MOBIS CO., LTD. 203 Teheran-ro, Gangnam-gu, Seoul, Korea, 135-977 Date : December 05, 2014 L etter of Authorization We, the undersigned, hereby authorize Harvey Sung of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCCID: TQ8-AMBA1B2AN including signing of all documents relating to these matters. Any and all acts carried out by DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from HYUNDAI MOBIS CO., LTD. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Dru g Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Seung Hoon Choe Manager

DT&C Co., Ltd. 42, Yurim-ro, 154beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 449-935 Date: December 05, 2014 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards;

HYUNDAI MOBIS CO., LTD. 203 Teheran-ro, Gangnam-gu, Seoul, Korea, 135-977 Date: December 05, 2014 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: TQ8-AMBA1B2AN To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, HYUNDAI MOBIS CO., LTD.hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give HYUNDAI MOBIS CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description SHORT-TERM 5 Internal Photos 6 External Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Seung Hoon Choe Manager

FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. Page 1 / 3 View 1 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. Page 2 / 3 View 2 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. Page 3 / 3 View 3

FCC ID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase Label locate Top side This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 1 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 2 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 3 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 4 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 5 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 6 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 7 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 8 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 9 FCCID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. View 10 < ANT>

-~ - - ± &dBm ) - - The MPE calculation for this exposure is shown below. ▪=+- =+ == - ▪S=- = = MHz MPE Calculations : (Bluetooth) HYUNDAI MOBIS Co., Ltd. FCCID: TQ8-AMBA1B2AN Frequency range : 2402 MHz2480 dBm Min. Measured RF output power :dBm Target Power & Tolerance :dBm 3.21 2.001.50.5 Maximum antenna peak gain :dBi Maximum output power for the calculatio 3.50 dBm dB ( Max. 3.50 3.5 The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the EIRPPGNote 3.50 dBm3.50 dBiP = Power input to the antenna(dBm) 7.00 dBm5.012 mWG = Power gain of the antenna(dBi) Power density at the specific separation EIRP / ( 4 R 2 π ) Note 5.012 / ( 4 X 20 2 X π )S = Maximum power dencity(mW/cm 2 ) The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.0 mW/cm 2 . 0.000998 mW/cm 2 EIRP = Equivalent Isotropic Radiated Power(mW) R = Distance to the center of the radiation of the antenna(20cm) Conclusion : The exposure condition of this device is compliant with FCC rules. TRF-RF-206(01)140415

FCCID: TQ8-AMBA1B2AN DTNC1411-05174 Report No.: DRTFCC1412-1587 TRF-RF-212(03)140515 Page 2 / 71 Copyright ○ C 2014, DT&C Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1412-1587 Dec. 09, 2014 Initial issue FCCID: TQ8-AMBA1B2AN DTNC1411-05174 Report No.: DRTFCC1412-1587 TRF-RF-212(03)140515 Page 3 / 71 Copyright ○ C 2014, DT&C Co., Ltd. Table of Contents 1.General Information ................................................................................................................ 5 1.1. Testing Laboratory ............................................................................................ 5 1.2. Details of Applicant ........................................................................................... 5 1.3. Description of EUT ............................................................................................ 5 1.4. Declaration by the manufacturer ..................................................................... 5 1.5. Information about the FHSS characteristics: ................................................. 6 1.6. Test Equipment List .......................................................................................... 7 1.7. Summary of Test Results ................................................................................. 8 1.8 Conclusion of worst-case and operation mode .............................................. 9 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission .......... 10 2.1. Test Setup ........................................................................................................ 10 2.2. Limit .................................................................................................................. 10 2.3. Test Procedures .............................................................................................. 11 2.3.1. Test Procedures for Radiated Spurious Emissions ................................ 11 2.3.2. Test Procedures for Conducted Spurious Emissions ............................ 11 2.4. Test Results ..................................................................................................... 12 2.4.1. Radiated Emission ...................................................................................... 12 2.4.2. Conducted Spurious Emissions ............................................................... 15 3. Carrier Frequency Separation ............................................................................................. 39 3.1.Test Setup ....................................................................................................... 39 3.2. Limit ................................................................................................................ 39 4.Number of Hopping Frequencies ........................................................................................ 44 4.1.Test Setup ....................................................................................................... 44 4.2. Limit ................................................................................................................ 44 5. 20dBc BW .............................................................................................................................. 50 5.1. Test Setup ........................................................................................................ 50 5.2. Limit .................................................................................................................. 50 5.3. Test Procedure ................................................................................................ 50 5.4. Test Results ..................................................................................................... 50 6. Time of Occupancy (Dwell Time) ........................................................................................ 56 6.1. Test Setup ........................................................................................................ 56 6.2. Limit .................................................................................................................. 56 6.3. Test Procedure ................................................................................................ 56 6.4. Test Results ..................................................................................................... 56 7. Maximum Peak Output Power Measurement .................................................................... 61 7.1. Test Setup ........................................................................................................ 61 7.2. Limit .................................................................................................................. 61 7.3. Test Procedure ................................................................................................ 61 7.4. Test Results ..................................................................................................... 62 8. Transmitter AC Power Line Conducted Emission ............................................................ 68 FCCID: TQ8-AMBA1B2AN DTNC1411-05174 Report No.: DRTFCC1412-1587 TRF-RF-212(03)140515 Page 4 / 71 Copyright ○ C 2014, DT&C Co., Ltd. 8.1. Test Setup ........................................................................................................ 68 8.2. Limit .................................................................................................................. 68 8.3. Test Procedures .............................................................................................. 68 8.4. Test Results ..................................................................................................... 68 9. Antenna Requirement .......................................................................................................... 69 10. Occupied Bandwidth (99%) ......................................................................................…

Text truncated - open the document above for the full version.

FCC ID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup photographs EUT Position: X-axis FCC ID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz) FCC ID: TQ8-AMBA1B2AN Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz)