TQ8-AN243DKANDIGITAL CAR AVN SYSTEM

DIGITAL NAVIGATION SYSTEM l OWNER'S MANUAL DIGITAL NAVIGATION SYSTEM OWNER'S MANUAL LM FL[북미]AVN_인증용매뉴얼_COVER.indd 32013-01-31 오전 11:02:08 DIGITAL NAVIGATION SYSTEM l OWNER'S MANUAL LM FL[북미]AVN_인증용매뉴얼_COVER.indd 22013-01-31 오전 11:02:07 Thank you for purchasing this Audio Navigation System. This user's manual explains how to use the Hyundai Motor Audio Navigation System. Before using the product, read the con- tents of this user's manual carefully and use this product safely. • The screens shown in this manual may differ with the actual screens of the product. • The design and specification of this product may change without prior noti- fication for product improvement. • When transferring the vehicle to another individual, include this user's manual so that the next driver can con- tinue its use. Precaution for safe usage • Driving while distracted can result in a loss of vehicle control, that may lead to an accident, severe personal injury, and death. The driver’s primary responsibil- ity is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle. • Do not operate the Audio Navigation sys- tem while driving. • Do not disassemble, assemble, or modify the Audio Navigation system. • Do not watch the screen for prolonged periods of time while driving. • Set the volume to a level which allows the driver to be aware of external conditions. • Do not operate the Audio Navigation sys- tem for prolonged periods of time with the vehicle ignition in ACC. Such operations may lead to battery discharge. • Be cautious not to spill water or introduce foreign objects into the device. • Do not cause severe shock to the device. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch panel. • In case of product malfunction, please contact your place of purchase or service center. • When cleaning the touch screen, make sure to turn off the device and use a dry and smooth cloth. Never use tough mate- rials, chemical cloths, or solvents (alcohol, ammonia, benzene, thinners, etc.) as such materials may damage the device panel or cause color and quality deterioration. All Map Database cannot be copied without permission. This is protected by U.S. copyright laws. All rights not expressly granted are reserved. You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent. LM FL[북미]AVN_인증용매뉴얼_COVER.indd 42013-01-31 오전 11:02:09 CAR AVN SYSTEM • Warnings and Cautions • Key Product Features • Component Names and Functions • Starting the System for the First Time Basic 1 표준3.0[북미]AVN_인증용매뉴얼.indd 12013-01-31 오전 11:01:20 1-2 Safety Warnings Even when receiving route guidance from the Navigation system, please abide by actual traffic and road regulations. Following only the Navigation route guidance may lead to violations of actual traffic and road regulations and lead to traffic accidents. Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents. Do not operate the Navigation system while driving, such as entering POIs or conducting route searches. Such acts could lead to accidents, fire, or electric shock. Park the vehicle before operating the device. Do not disassemble, assemble, or modify the Navigation system. Such acts could result in accidents, fire, or electric shock. Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction. Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents (fires, electric shock) or product malfunctions. Do not touch the antenna during thunder or lightening as such acts may lead to lightning induced electric shock. Do not stop or park in parking-restricted areas to operate the prod- uct. Such acts could lead to traffic accidents. For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen. (The screen will operate when the park- ing brake is set to ON for manual transmission vehicles and when set to P or Parking Brake On state for auto transmission vehicles.) Warnings and Cautions 표준3.0[북미]AVN_인증용매뉴얼.indd 22013-01-31 오전 11:01:21 Warnings and Cautions Basic 1-3 Safety Cautions Pay attention to traffic conditions while driving. In some instances, the navigation may provide guidance through re- stricted areas. Operating the device while driving could lead to accidents due to a lack of attention to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehicle is in motion. The touch screen fea- ture will be supported once the vehicle has stopped. Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents. Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impairment. (Adjust the volume to a suitable levels before turning off the device.) If you want to change the position of device installation, please in- quire with your place of purchase or service maintenance center. Technical expertise is required to install or disassemble the device. Turn on the car ignition before using this device. Do not operate the Navigation system for long periods of time with the ignition turned off as such operations may lead to battery discharge. Upon using the Navigation system for more than 10 minutes with the car engine turned o…

Text truncated - open the document above for the full version.

HYUNDAI MOBIS CO., LTD. 80-9, Mabook-Dong, Giheung-Gu, Yongin-shi, Gyunggi-Do, 446-912, South Korea Date: July 24, 2013 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

HYUNDAI MOBIS CO., LTD. 80-9, Mabook-Dong, Giheung-Gu, Yongin-shi, Gyunggi-Do, 446-912, South Korea Date: July 24, 2013 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: TQ8-AN243DKAN To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, HYUNDAI MOBIS CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give HYUNDAI MOBIS CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 Part Lists SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Jong Tae Kim Director

HYUNDAI MOBIS CO., LTD. 80-9, Mabook-Dong, Giheung-Gu, Yongin-shi, Gyunggi-Do, 446-912, South Korea Date: July 24, 2013 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA LETTER OF AUTHORIZATION We, the undersigned, hereby authorize Harvey Sung of Digital EMC Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: TQ8-AN243DKAN including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of Digital EMC Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from HYUNDAI MOBIS CO., LTD. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Jong Tae Kim Director

FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 1 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 2 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 3

FCC ID: TQ8-AN243DKAN Copyright Ⓒ 2013, Digital EMC Co., Ltd. SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase Label locate Top side This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page1 / 12 View 1 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page2 / 12 View 2 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page3 / 12 View 3 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page4 / 12 View 4 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page5 / 12 View 5 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page6 / 12 View 6 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page7 / 12 View 7 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page8 / 12 View 8 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page9 / 12 View 9 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page10 / 12 View 10 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page11 / 12 View 11 FCCID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page12 / 12 Antenna

-~ - - The MPE calculation for this exposure is shown below. The peak radiated output power (EIRP) is calculated as follows: ▪=+- =+ = - ▪S=- =X = mW/cm 2 FCCID: TQ8-AN243DKAN MPE Calculations Frequency range :2402MHz2480MHz 1.85dBm 1.00dBi Maximum RF output power : Maximum antenna peak gain : The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the user. EIRPPGNote 1.85dBm1.00dBiP = Power input to the antenna(dBm) 2.85dBmG = Power gain of the antenna(dBi) Power density at the specific separation P G / ( 4 R 2 π ) Note 1.53 1.259 / ( 4 X 20 2 X π )S = Maximum power dencity(mW/cm 2 ) 0.00038 mW/cm 2 P = Power input to the antenna(mW) G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna(20cm) Conclusion : N/A (The EIRP is below the limit.) The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.61 TRF-RF-206(00)100216

DEMC1307-02055, DEMC1307-02056 FCC ID: TQ8-AN243DKAN Report No.: DRTFCC1307-0701 IC: 5074A-AN243DKKN TRF-RF-212(00)101214 Page2 / 74 Copyright ○ C 2013, Digital EMC Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1307-0701 Jul. 24, 2013 Initial issue DEMC1307-02055, DEMC1307-02056 FCC ID: TQ8-AN243DKAN Report No.: DRTFCC1307-0701 IC: 5074A-AN243DKKN TRF-RF-212(00)101214 Page3 / 74 Copyright ○ C 2013, Digital EMC Co., Ltd. Table of Contents 1.General Information ................................................................................................................ 5 1.1 Testing Laboratory ......................................................................................... 5 1.2 Details of Applicant ........................................................................................ 5 1.3 Description of EUT ......................................................................................... 5 1.4. Declaration by the manufacturer .................................................................... 5 1.5. Information about the FHSS characteristics: ................................................ 6 1.6. Test Equipment List ........................................................................................ 7 1.7. Summary of Test Results ................................................................................ 8 1.8 Conclusion of worst-case and operation mode .............................................. 9 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission .......... 10 2.1. Test Setup ...................................................................................................... 10 2.2. Limit ................................................................................................................ 10 2.3. Test Procedures............................................................................................. 11 2.3.1. Test Procedures for Radiated Spurious Emissions................................ 11 2.3.2. Test Procedures for Conducted Spurious Emissions ............................ 11 2.4. Test Results ................................................................................................... 12 2.4.1. Radiated Emission .................................................................................... 12 2.4.2. Conducted Spurious Emissions .............................................................. 15 3. Carrier Frequency Separation............................................................................................. 33 3.1.Test Setup ..................................................................................................... 33 3.2. Limit ................................................................................................................ 33 4. Number of Hopping Frequencies ....................................................................................... 38 4.1. Test Setup..................................................................................................... 38 4.2. Limit ................................................................................................................ 38 5. 20dBc BW .............................................................................................................................. 47 5.1. Test Setup ...................................................................................................... 47 5.2. Limit ................................................................................................................ 47 5.3. Test Procedure .............................................................................................. 47 5.4. Test Results ................................................................................................... 47 6. Time of Occupancy (Dwell Time) ........................................................................................ 53 6.1. Test Setup ...................................................................................................... 53 6.2. Limit ................................................................................................................ 53 6.3. Test Procedure .............................................................................................. 53 6.4. Test Results ................................................................................................... 53 7. Maximum Peak Output Power Measurement .................................................................... 58 7.1. Test Setup ...................................................................................................... 58 7.2. Limit ................................................................................................................ 58 7.3. Test Procedure ............................................................................................... 58 7.4. Test Results ................................................................................................... 59 8. Transmitter AC Power Line Conducted Emission ............................................................ 65 DEMC1307-02055, DEMC1307-02056 FCC ID: TQ8-AN243DKAN Report No.: DRTFCC1307-0701 IC: 5074A-AN243DKKN TRF-RF-212(00)101214 Page4 / 74 Copyright ○ C 2013, Digital EMC Co., Ltd. 8.1. Test Setup ...................................................................................................... 65 8.2. Limit ................................................................................................................ 65 8.3. Test Procedures ............................................................................................. 65 8.4. Test Results ................................................................................................... 65 9. Antenna Requirement .......................................................................................................... 66 10. Occupied Bandwidth(99%) ......................…

Text truncated - open the document above for the full version.

FCC ID: TQ8-AN243DKAN IC: 5074A-AN243DKKN Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo of Radiated Measurement (1 ~ 18 GHz)