TQ8-AV230D9ANDIGITAL CAR AVN SYSTEM

Hyundai MOBIS Car Audio Manual Knowing your Vehicle How vehicle audio works AM and FM radio signals are broadcast f rom transmitter towers located around your city. They are inter cepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the precis e engineering of your audio system ensures the best possible qu ality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear. This can be due to fa ctors such as the distance from the radio station, closeness of other strong radio stations or the presence of buildings, bridg es or other large obstru ctions in the area. AM broadcasts can be received at greater distances than FM broa dcasts. This is because AM radio waves are transmitted at low f requencies. These long, low frequency radio waves can follow the curvature of the earth rat her than travelling straight out into the atmosphere. In additi on, they curve around obstructions so that they can pr ovide better signal coverage. FM broadcasts are transmitted at high frequencies and do not be nd to follow the earth's surface. Because of this, FM broadcast s generally begin to fade at short distances from the station. Also, FM signals are easily a ffected by buildings, mountains, or other obstructions. These c an result in certain listening conditions which might lead you to believe a problem exists wit h your radio. The following conditions are normal and do not in dicate radio trouble: • Fading - As your vehicle moves away from the radio station, t he signal will weaken and sound will begin to fade. When this o ccurs, we suggest that you select another stronger station. • Flutter/Static - Weak FM signals or large obstructions betwee n the transmitter and your radio can disturb the signal causing static or fluttering noises to occur. Reducing the treble le vel may lessen this effect unti l the disturbance clears. • Station Swapping - As a FM signal weakens, another more power ful signal near the same frequen cy may begin to play. This is b ecause your radio is designed to lock onto the cleare st signal. If this occurs, sele ct another station with a stronger signal. • Multi-Path Cancellation - Radio signals being received from s everal directions can cause dist ortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations w ith close frequencies. If this o ccurs, select an other station u ntil the condition has passed. Hyundai MOBIS Car Audio Manual Using a cellular phone or a two-way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio equipment. This does not mean that some thing is wrong with the audio equipment. In such a case, use the cellular phone at a pl ace as far as possible from the audio equipment. Care of discs • If the temperature inside the vehicle is too high, open the v ehicle windows for ventilation b efore using your vehicle audio. • It is illegal to copy and use MP 3/WMA files without permissio n. Use CDs that are created only by lawful means. • Do not apply volatile agents such as benzene and thinner, nor mal cleaners and magnetic sprays made for analogue disc onto CD s. • To prevent the disc surface from getting damaged. Hold and ca rry CDs by the edges or the edges of the center hole only. • Clean the disc surface with a piece of soft cloth before play back (wipe it from the center to the outside edge). • Do not damage the disc surface or attach pieces of sticky tap e or paper onto it. • Make sure objects other than CDs are not inserted into the CD player (Do not insert more than one CD at a time). • Keep CDs in their cases after use to protect them from scratc hes or dirt. • Depending on the type of CD-R/CDRW CDs, certain CDs may not o perate normally according to manufacturing companies or making and recording methods. In such circu mstances, if you still continue to use th ose CDs, they may cause the malf unction of your vehicle audio s ystem. ✽ NOTICE - Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with the internati onal audio CD standards (Red Book), may not play on your vehicl e audio. Please note that if you try to play copy protected CDs and the CD player does not p erform correctly the CDs maybe defective, not the CD player. Hyundai MOBIS Car Audio Manual Using RADIO, SETUP, VOLUME AUDIO CONTROL 1. “FM” Button Turns to FM mode and toggles FM1and FM2 when the button is pres sed each time. 2. “AM” Button Pressing the button selects the AM band. AM Mode is displayed o n the LCD. 3. “SEEK” Button • When the button is pressed, it increases the band frequency t o automatically select channel. Stops at the previous frequency if no channel is found. • When the button is pressed, it reduces the band frequency to automatically select channel. Sto ps at the previous frequency i f no channel is found. 4. “AST” Button(AUTO STORE Button) When the button is pressed, it au tomatically selects and saves channels with high reception rate to PRESET buttons 1~6 and plays the channel saved in PRESET1. If no channel is sa ved after AST, it will pla y the previous channel. • When the button is pressed for longer than 0.8 second, it aut omatically scans the radio preset station upwards. • Press the button again to stop the scan feature and to listen to the currently selected channel. 5. Knob If the knob is turned clockwise/ counterclockwise, the volume wi ll increase/decrease. Hyundai MOBIS Car Audio Manual Using CD Player 1. Button (CD) If the CD is loaded, turns to CD mode. If no CD, it displays “N o Media” for 3 seconds and returns to the previous mode. 2. Button • Press button for less than 0.8 seconds to play from the begin ning of current song. • Press button for less than 0.8 seconds and press again within 1 second to play the previous song. • Press button for 0.8 sec…

Text truncated - open the document above for the full version.

Hyundai MOBIS Co., Ltd. 203, Teheran‐ro, Gangnam‐gu, Seoul, 135‐977, Korea Tel. 82‐31‐260‐0092 10 May 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Request of Confidentiality for FCC ID: TQ8‐AV230D9AN To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Hyundai MOBIS Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short‐Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04‐1705. This provision will give Hyundai MOBIS Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIST Permanent 1 Block Diagram 2 Operational Descriptions 3 Schematics 4 Part List Short‐Term 4 External Photos 5 Internal Photos 6 Test‐Setup Photos 7 User’s Manual The A pplicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, __________________________ Seung Hoon Choe Senior Researcher Hyundai MOBIS Co., Ltd.

Hyundai MOBIS Co., Ltd. 203, Teheran‐ro, Gangnam‐gu, Seoul, 135‐977, Korea Tel. 82‐31‐260‐0092 10 May 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Letter of Authorization We, Hyundai MOBIS Co., Ltd. hereby authorize SGS Korea Co., Ltd. (DONGMIN KIM) to act on our behalf in all matters of certification. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐ Drug Abuse Act of 1988, 21 U.S.C. 853(a). Any and all acts carried out by SGS Korea on our behalf shall have the same effect as acts of our own. This authorization is valid until further written notice. Sincerely, __________________________ Seung Hoon Choe Senior Researcher Hyundai MOBIS Co., Ltd.

External photos of EUT Total view of EUT EUT GPS AntemmanWLAN Antenna Top view of EUT Bottom view of EUT Front view of EUT Rear view of EUT Side view of EUT Top view of Sub EUT Bottom view of Sub EUT Front view of Sub EUT Rear view of Sub EUT Side view of Sub EUT

AV230D9ANLABEL If i LABEL LOCATION LABEL I n f ormat i on Hyundai MOBIS Co., Ltd. FCC MODEL: AV230D9AN FCC ID: TQ8 ‐ AV230D9AN LABEL LOCATION This device complies with part 15 of the FCC Rules. Operation is Subject to the following to conditions: (1) This device may not cause harmful interference, and (2) The device must accept any interference received, Including interference that may cause undesired operation LABEL Made in Korea MANUFACTURED BY HYUNDAI MOBIS LABEL PRODUCT LABEL FRONT

Internal photos of EUT Internal view of EUT Top view of Main PCB Bottom view of Main PCB Top view of sub 1 PCB Bottom view of sub 1 PCB Top view of Key PCB Bottom view of Key PCB View of Module View of Antenna View of WLAN Antenna View of GPS Antenna

Report Number: F690501/RF-RTL008704 Page: 2 of 61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) INDEX Table of Contents Page 1. General Information --------------------------------------------------------------------------------- 3 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission ------ 7 3. 20㏈ Bandwidth ------------------------------------------------------------------------------------- 31 4. Maximum Peak Output Power ------------------------------------------------------------------- 38 5. Carrier Frequency Separation -------------------------------------------------------------------- 40 6. Number of Hopping Frequencies ---------------------------------------------------------------- 43 7. Time of Occupancy(Dwell Time) ----------------------------------------------------------------- 47 8. Antenna Requirement ------------------------------------------------------------------------------ 61 Report Number: F690501/RF-RTL008704 Page: 3 of 61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - Wireless Div. 2FL, 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-837 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Telephone : +82 31 688 0901 FAX : +82 31 688 0921 1.2. Details of Applicant Applicant : Hyundai MOBIS Co., Ltd. Address : 203, Teheran-ro, Gangnam-gu, Seoul, 135-977, Korea Contact Person : Choi, Seung-Hoon Phone No. : + 82 31 260 0098 1.3. Description of EUT Kind of Product DIGITAL CAR AVN SYSTEM Model Name AV230D9AN Power Supply DC 14.4 V (Vehicle Battery) Frequency Range 2 402 ㎒ ~ 2 480 ㎒ Modulation Technique GFSK, π/4DQPSK, 8DPSK Number of Channels 79 channels Operation Temperature -20 °C ~ 70 °C Antenna Type Internal Type Antenna Gain -2.89 ㏈i 1.4. Declaration by the manufacturer - Adaptive Frequency Hopping is supported and use at least 20 channels - WLAN & BT do not transmit simultaneously. Report Number: F690501/RF-RTL008704 Page: 4 of 61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1.5. Information about the FHSS characteristics: 1.5.1. Pseudorandom Frequency Hopping Sequence The channel is represented by a pseudo-random hopping sequence hopping through the 79 RF channels. The hopping sequence is unique for the piconet and is determined by the Bluetooth device address of the master; the phase in the hopping sequence is determined by the Bluetooth clock of the master. The channel is divided into time slots where each slot corresponds to an RF hop frequency. Consecutive hops correspond to different RF hop frequencies. The nominal hop rate is 1 600 hops/s. 1.5.2. Equal Hopping Frequency Use The channels of this system will be used equally over the long-term distribution of the hopsets. 1.5.3. Example of a 79 hopping sequence in data mode: 02, 05, 31, 24, 20, 10, 43, 36, 30, 23, 40, 06, 21, 50, 44, 09, 71, 78, 01, 13, 73, 07, 70, 72, 35, 62, 42, 11, 41, 08, 16, 29, 60, 15, 34, 61, 58, 04, 67, 12, 22, 53, 57, 18, 27, 76, 39, 32, 17, 77, 52, 33, 56, 46, 37, 47, 64, 49, 45, 38, 69, 14, 51, 26, 79, 19, 28, 65, 75, 54, 48, 03, 25, 66, 05, 16, 68, 74, 59, 63, 55 1.5.4. System Receiver Input Bandwidth Each channel bandwidth is 1㎒. The system receivers have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shift frequencies in synchronization with the transmitted signals. 1.5.5. Equipment Description 15.247(a)(1) that the rx input bandwidths shift frequencies in synchronization with the transmitted 15.247(g): In accordance with the Bluetooth Industry Standard, the system is designed to comply with all of the regulations in Section 15.247 when the transmitter is presented with a continuous data (or information) system. 15.247(h): In accordance with the Bluetooth Industry Standard, the system does not coordinate it channels selection/ hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters. Report Number: F690501/RF-RTL008704 Page: 5 of 61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1.6. Test Equipment List Equipment Manufacturer Model S/N Cal Date Cal Interval Cal Due. Signal Generator R&S SMR40 100272 Jul. 18, 2014 Annual Jul. 18, 2015 Signal Generator R&S SMBV100A 259067 Jun. 25, 2014 Annual Jun. 25, 2015 Spectrum Analyzer Agilent N90…

Text truncated - open the document above for the full version.

Report Number:F690501/RF-RTL008703Page:2of5 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) INDEX Table of ContentsPage 1. General Information --------------------------------------------------------------------------------3 2. RF Exposure Evaluation --------------------------------------------------------------------------5 Report Number:F690501/RF-RTL008703Page:3of5 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) -Wireless Div. 2FL, 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-837 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible athttp://www.sgs.com/en/Terms-and-Conditions.aspx. Telephone:+82 31 688 0901 FAX:+82 31 688 0921 1.2. Details of Applicant Applicant:Hyundai MOBIS Co., Ltd. Address:203, Teheran-ro, Gangnam-gu, Seoul, 135-977, Korea Contact Person:Choi, Seung-Hoon Phone No.:+ 82 31 260 0098 1.3. Description of EUT Kind of Product DIGITAL CAR AVN SYSTEM Model Name AV230D9AN Power Supply DC 14.4 V (Vehicle Battery) Frequency Range 2 402㎒~ 2 480㎒(BT), 2 412㎒~ 2 462㎒(11b/g/n_HT20) Modulation Technique DSSS, OFDM,GFSK, π/4DQPSK, 8DPSK Number of Channels 79 channels (BT), 11 channels (11b/g/n_HT20) Antenna Type Internal Type (BT), External Type (11b/g/n_HT20) Antenna Gain -2.89㏈i 1.4. Declaration by the manufacturer - WLAN & BT do not transmit simultaneously. 1.5. Test report revision RevisionReport numberDate of IssueDescription 0F690501/RF-RTL0087032015.05.06Initial Report Number:F690501/RF-RTL008703Page:4of5 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) 2. RF Exposure Evaluation 2.1. Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(b), 1.1310 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) 2.1.1. Friis transmission formula: Pd = (Pout*G)/(4*pi*R 2 ) Where Pd = power density in㎽/㎠ Pout = output power to antenna in㎽ G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in㎝ Pd the limit of MPE, 1㎽/㎠. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Frequency Range (㎒) Electric Field Strength(V/m) Magnetic Field Strength (A/m) Power Density (㎽/㎠) Average Time (A) Limits for Occupational/Controlled Exposure 0.3 – 3.06141.63*1006 3.0 – 301842/f4.89/f*900/f 2 6 30 - 30061.40.1631.06 300 – 1 500--f/3006 1 500 – 100 000--56 (B) Limits for General Population/Uncontrolled Exposure 0.3 – 1.346141.63*10030 1.34 – 30824/f2.19/f*180/f 2 30 30 - 30027.50.0730.230 300 – 1 500--f/150030 1 500 – 100 000 -- 1.030 Report Number:F690501/RF-RTL008703Page:5of5 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) 2.1.2. Test Result of RF Exposure Evaluation Test Item：RF Exposure Evaluation Data Test Mode：Normal Operation 2.1.3.Output Power into Antenna & RF Exposure Evaluation Distance BT - Maximum tune up tolerance Operating Frequency Range (㎒) Maximum Average Output Power to Antenna (㏈m) Antenna Gain (㏈i) Power Density at 20㎝(㎽/㎠) Limits (㎽/㎠) 2 402 ~ 2 4804-2.890.000 2571 WLAN (2.4G) - Maximum tune up tolerance Operating Frequency Range (㎒) Maximum Average Output Power to Antenna (㏈m) Antenna Gain (㏈i) Power Density at 20㎝(㎽/㎠) Limits (㎽/㎠) 2 412 ~ 2 46218-2.890.006 4531 Note : 1. The power density Pd (5th column) at a distance of 20㎝calculated from the friis transmission formula is far below the limit of 1㎽/㎠.

Test setup photos of EUT 1. Orthogonal planes of EUT - The testing was set in the below orthogonal planes and measured X- axis 2. BT A. Photo of Radiated Spurious Emission Test (Below 1㎓) B. Photo of Radiated Spurious Emission Test (Above 1㎓) 2.WLAN A. Photo of Radiated Spurious Emission Test (Below 1㎓) B. Photo of Radiated Spurious Emission Test (Above 1㎓) \