TQ8-DA330G2ANDISPLAY CAR SYSTEM

1 Car Infotainment System User's Manual [This guide covers specifications for all vehicle models, including optional specifications, and is based on the latest version of system software. [Your system's functions and specifications are subject to change without prior notice for performance improvement. [The functions and services described in this guide are subject to change without prior notice for performance improvement. If the system software is updated, the screenshots in this guide may appear different than the actual images on the system. [You can view the up-to-date information about changed functions and services from the web manual. [The functions and services described in this guide may differ from those provided in your vehicle. For precise information related to your vehicle, refer to the owner's manual or catalog of your vehicle. [Your system is not compatible with the system software for regions outside of the country of purchase. Available information for users Car Infotainment System Quick Reference Guide (Print) This guide contains basic information to use your system including component names and functions. To use your system correctly and safely, read this guide before use. Car Infotainment System User's Manual (Web) This guide is a web manual you can access by scanning a QR code in the Quick Reference Guide or on your system′s screen. This guide introduces your system's functions and explains how to use them. DISPLAY CAR SYSTEM 2 Symbols used in this guide Warning Indicates important information related to user safety. Failure to follow warnings may result in death or serious personal injury. Caution Indicates important information related to user safety. Failure to follow cautions may result in personal injury, or damage or malfunction your vehicle. Note Indicates helpful information for convenient use. (if equipped) Indicates descriptions for optional features, which may not be available on your specific vehicle depending on the model or trim level. This guide covers specifications for all vehicle models, including optional specifications. It may include descriptions for features that are not equipped in your vehicle or are unavailable for your vehicle model. Safety warnings For safety, follow the instructions below. Failure to do so may increase the risk of a traffic accident, which may result in death or personal injury. ÜAbout driving Do not operate the system while driving. •Driving while distracted may result in a loss of vehicle control, potentially leading to an accident, severe personal injury, or death. The driver′s primary responsibility is the safe and legal operation of a vehicle, and any handheld devices, equipment, or vehicle systems which divert the driver′s attention from this responsibility should never be used during operation of the vehicle. Avoid watching the screen while driving. •Driving while distracted may lead to a traffic accident. •Stop your vehicle in a safe location before using functions that require multiple operations. Stop your vehicle first before using your mobile phone. •Using a mobile phone while driving may lead to a traffic accident. Keep the volume low enough to hear external sounds. •Driving without the ability to hear external sounds may lead to a traffic accident. •Listening to a loud volume for a long time may cause hearing damage. 3 ÜAbout handling the system Do not disassemble or modify the system. •Doing so may result in an accident, fire, or electric shock. Do not allow liquids or foreign substances to enter the system. •Liquids or foreign substances may cause noxious fumes, a fire, or a system malfunction. Stop using the system if it malfunctions, such as no audio output or display. •If you continue using the system when it is malfunctioning, it may lead to a fire, electric shock, or system failure. ÛNote If you experience any problems with the system, contact your place of purchase or dealer. Safety cautions For safety, follow the instructions below. Failure to do so may result in personal injury or damage to the system. ÝAbout operating the system Use the system with the engine running. •Using the system for a long time when the engine is stopped may discharge the battery. Do not install unapproved products. •Using unapproved products may cause an error while using the system. •System errors caused by installing unapproved products are not covered under the warranty. ÝAbout handling the system Do not apply excessive force to the system. •Excessive pressure on the screen may damage the LCD panel or the touch panel. When cleaning the screen or button panel, make sure to stop the engine and use a soft, dry cloth. •Wiping the screen or buttons with a rough cloth or using solvents (alcohol, benzene, paint thinner, etc.) may scratch or chemically damage the surface. If you attach a liquid-type air freshener to the fan louver, the surface of the louver may become deformed due to the flowing air. ÛNote If you experience any problems with the system, contact your place of purchase or dealer. 4 HYUNDAI VEHICLE OWNER PRIVACY POLICY Your Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect use and share this information. You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com website at: https://www.hyundaiusa.com/owner- privacy-policy.aspx If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact our Customer Connect Center at: Hyundai Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 [email protected] Hyundai′s Customer Connect Center representatives are available Monday through Friday, between the hours of 5:00 AM and 7:00 PM PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST (English). For Customer Connect Center assistance in Spanish or Korean, repre…

Text truncated - open the document above for the full version.

HYUNDAI MOBIS CO., LTD. 203 Teheran-ro, Gangnam-gu, Seoul, Korea, 135-977 Date: Jun 12, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Letter of Authorization We, the undersigned, hereby authorize Guenki Son of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: TQ8-DA330G2AN including signing of all documents relating to these matters. Any and all acts carried out by Guenki Son of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from HYUNDAI MOBIS CO., LTD. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Seung Hoon Choe Manager

HYUNDAI MOBIS CO., LTD. 203 Teheran-ro, Gangnam-gu, Seoul, Korea, 135-977 Date: Jun 12, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA RE: Request of Confidentiality for FCC ID: TQ8-DA330G2AN To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, HYUNDAI MOBIS CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give HYUNDAI MOBIS CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description SHORT-TERM 5 Internal Photos 6 External Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Seung Hoon Choe Manager

FCC ID : TQ8-DA330G2AN MODEL: DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 1 FCC ID : TQ8-DA330G2AN MODEL: DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 2 FCC ID : TQ8-DA330G2AN MODEL: DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 3 FCC ID : TQ8-DA330G2AN MODEL: DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 4

FCC ID: TQ8-DA330G2AN SAMPLE LABEL & LOCATION MODEL: DA330G2AN 14.4 V 4 Ω10 A AM 531 ~ 1602 kHz MADE IN KOREA This device complies with part 15 of the FCC Rules. O peration is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. UNDER LICENSE OF STAAR S.A. , BRUXELLS BELGIUM: DOLBY NOISE REDUCTION MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES LICENSING CORPORATION. "DOLBY" AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES LICENSING CORPORATION MANUFACTURED : HYUNDAI MOBIS CO., LTD. Copyright Ⓒ 2020, DT&C Co., Ltd. FM 87.5 ~ 108 MHz FCC ID: TQ8-DA330G2AN Contains FCC ID: YZP-VL3010

FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 1 FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 2 FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 3 FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 4 <LTE CDMA Module> FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 5 <BT WIFI Module> FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 6

FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 7 FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 8 <Sub Module> FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 9 FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 10 <BT Antenna> FCC ID : TQ8-DA330G2AN MODEL : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. View 11 <WLAN Antenna>

FCC ID: TQ8-DA330G2AN RF function or Mode Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requriment (mW/cm 2 ) Bluetooth(1Mbps) 2402.00 ~ 2480.00 2.00 -0.18 1.82 1.521 0.0004 1.000 Bluetooth(2,3Mbps) 2402.00 ~ 2480.00 -2.00 -0.18 -2.18 0.606 0.0002 1.000 ~~~~~~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averageing time (minutes) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : ▪ Limits for Maximum Perm issible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 1.521 S= Maximum power density(mW/cm 2 ) 0.0004 EIRP= Equivalent Isotropic Radiated Power(mW)R= Distance to the center of the radiation of the anten n MPE Calculation : Bluetooth Frequency range (MHz) The EUT will only be used with a separation of 20 centimeters o r greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below.Note: Please refer to the operation description for Max tune-up power. FCC ID: TQ8-DA330G2AN Mode(Worst case) Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requriment (mW/cm 2 ) 802.11g 2412.00 ~ 2462.00 6.00 -0.01 5.99 3.972 0.0008 1.000 802.11a 5180.00 ~ 5240.00 8.50 -0.61 7.89 6.152 0.0013 1.000 802.11a 5260.00 ~ 5320.00 8.50 -0.18 8.32 6.793 0.0014 1.000 802.11a 5500.00 ~ 5720.00 7.00 -0.77 6.23 4.198 0.0009 1.000 802.11a 5745.00 ~ 5825.00 4.00 -0.18 3.82 2.410 0.0005 1.000 ~~~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averageing time (minutes) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : MPE Calculation : WLAN Frequency range (MHz) The EUT will only be used with a separation of 20 centimeters o r greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below.Note: Please refer to the operation description for Max tune-up power. ▪ Limits for Maximum Perm issible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 6.152 S= Maximum power density(mW/cm 2 ) 0.001 EIRP= Equivalent Isotropic Radiated Power(mW)R= Distance to the center of the radiation of the anten n FCC ID: TQ8-DA330G2AN RF function or Mode Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requriment (mW/cm 2 ) LTE(Band 13) 777.00 ~ 787.00 25.70 1.38 27.08 510.505 0.1016 0.518 LTE(Band 5) 824.70 ~ 848.30 25.70 2.80 28.50 707.946 0.1409 0.549 LTE(Band 4) 1710.70 ~ 1754.30 25.70 3.96 29.66 924.699 0.1840 1.000 LTE(Band 2) 1850.70 ~ 1909.30 25.70 5.23 30.93 1238.797 0.2465 1.000 CDMA(Band 850) 824.70 ~ 848.31 25.70 2.80 28.50 707.946 0.1409 0.549 CDMA(Band 1900) 1851.25 ~ 1908.75 25.70 5.23 30.93 1238.797 0.2465 1.000 ~~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averageing time (minutes) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : R= Distance to the center of the radiation of the anten n ▪ Limits for Maximum Perm issible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC The EUT will only be used with a separation of 20 centimeters o r greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below. EIRP / ( 4 R 2 π ) 510.505 S= Maximum power density(mW/cm 2 ) 0.1016 EIRP= Equivalent Isotropic Radiated Power(mW) MPE Calculation : LTE, CDMA Frequency range (MHz) Note: Please refer to the operation description for Max tune-up power. ▪▪ MPE ratio (Power Density/Requirement) RF function or mode(Worst case) BT + W-LAN(5GHz) + LTE (Band 5) 1.0000 WLAN BT Power Density (mW/cm2) 0.0014 LTE Band(Worst case) 2.4GHz 0.0004 5GHz 0.25660.5490 0.0014 - Band 5 0.1409 -- Σ of MPE ratios - - Worst case(MPE ratio) 0.2566 - 0.00040.0004 0.0014 Worst case for simultaneous operations Requirement (mW/cm2) - 1.0000 -- The exposure condition of this device is compliant with FCC rul es. Conclusion : Σ of MPE ratios ≤ 1 ▪ Requirment = - 0.2584 - TQ8-DA330G2AN FCC ID: RF Exposure Compliance for simultaneous operations

Report No.: DRTFCC2006-0166 FCC ID: TQ8-DA330G2AN TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 2 / 76 Test Report Version Test Report No. Date Description Revised By Reviewed by DRTFCC2006-0166 Jun. 12, 2020 Initial issue InHee Bae JaeJin Lee Report No.: DRTFCC2006-0166 FCC ID: TQ8-DA330G2AN TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 3 / 76 Table of Contents 1. General Information ..................................................................................................................... 4 1.1 Testing Laboratory .......................................................................................................................... 4 1.2 Testing Environment ....................................................................................................................... 4 1.3 Measurement Uncertainty ............................................................................................................... 4 1.4 Details of Applicant ......................................................................................................................... 5 1.5 Description of EUT .......................................................................................................................... 5 1.6 Declaration by the applicant / manufacturer ................................................................................. 5 1.7 Information about the FHSS characteristics ................................................................................. 6 1.8 Test Equipment List ......................................................................................................................... 7 1.9 Summary of Test Results ................................................................................................................ 8 1.10 Conclusion of worst-case and operation mode .......................................................................... 9 2. Maximum Peak Output Power Measurement .......................................................................... 10 2.1 Test Setup ...................................................................................................................................... 10 2.2 Limit ................................................................................................................................................ 10 2.3 Test Procedure ............................................................................................................................... 10 2.4 Test Results ................................................................................................................................... 11 3. 20 dB BW ..................................................................................................................................... 17 3.1 Test Setup ...................................................................................................................................... 17 3.2 Limit ................................................................................................................................................ 17 3.3 Test Procedure ............................................................................................................................... 17 3.4 Test Results ................................................................................................................................... 17 4. Carrier Frequency Separation ................................................................................................... 23 4.1 Test Setup ...................................................................................................................................... 23 4.2 Limit ................................................................................................................................................ 23 4.3 Procedure ....................................................................................................................................... 23 4.4 Test Results ................................................................................................................................... 23 5. Number of Hopping Frequencies ............................................................................................. 28 5.1 Test Setup ...................................................................................................................................... 28 5.2 Limit ................................................................................................................................................ 28 5.3 Procedure ....................................................................................................................................... 28 5.4 Test Results ................................................................................................................................... 28 6. Time of Occupancy (Dwell Time) .............................................................................................. 34 6.1 Test Setup ...................................................................................................................................... 34 6.2 Limit ................................................................................................................................................ 34 6.3 Test Procedure ............................................................................................................................... 34 6.4 Test Results ................................................................................................................................... 34 7. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission ................ 39 7.1 Test Setup ...........................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID : TQ8-DA330G2AN Model : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement EUT Position: X-axis FCC ID : TQ8-DA330G2AN Model : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID : TQ8-DA330G2AN Model : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz)) FCC ID : TQ8-DA330G2AN Model : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz) FCC ID : TQ8-DA330G2AN Model : DA330G2AN Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo for DFS