TQ8-NBBMUV01Battery Management Unit

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Address 203, Teheran-ro, Gangnam-gu, Seoul, 135-977, Korea FRN 0023347537 Grantee Code TQ8 FCC ID: Authorized Contact Name Seung Hoon Choe Contact Phone +82-31-260-0098 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2025-12-30 Print Name: Seung Hoon Choe Title: Senior Researcher *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database HYUNDAI MOBIS CO., LTD. TQ8-NBBMUV01

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Address 203, Teheran-ro, Gangnam-gu, Seoul, 135-977, Korea FRN 7357433200 Grantee Code TQ8 FCC ID: Authorized Contact Name Seung Hoon Choe Contact Phone +82-31-260-0098 Contact Email [email protected] Hyundai MOBIS Co., Ltd. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is not inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 2025-12-30 Print Name: Seung Hoon Choe Title: Senior Researcher *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database HYUNDAI MOBIS CO., LTD. TQ8-NBBMUV01

UNITED STATES DESIGNATED AGENT LETTER Date: 2025‐12-30 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Company Name:Americas Compliance Consulting LLC dba iCertifi Grantee Code: TQ8FRN:0033399411 Contact Name: Seung Hoon Choe Contact Name:Paul Preston Address: 203, Teheran‐ro Gangnam‐gu Address:1001 SW Disk Drive Suite 250 City/Province/Zip: Seoul, Republic of KoreaCity/Province/Zip:Bend, Oregon 97702 USA Telephone: +82‐31‐260‐0098 Telephone:+1 866‐885‐4575 Fax: N/AFax:N/A Email: [email protected] Email:[email protected] Applicable Equipment: FCC ID: <TQ8-NBBMUV01> ATTN: Director of Certification: We, Hyundai MOBIS Co., Ltd. and Americas Compliance Consulting LLC dba iCertifi understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e‐mail of the designated agent listed above. We, Hyundai MOBIS Co., Ltd. and Americas Compliance Consulting LLC dba iCertifi acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission‐related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed) Seung Hoon Choe Name (Printed)Paul Preston Title Senior Research EngineerTitlePresident Signature Signature Hyundai MOBIS Co., Ltd.

203, Teheran‐ro, Gangnam‐gu, Seoul, 06141, Korea Tel. 82‐31‐260‐0092 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Letter of Authorization We, Hyundai MOBIS Co., Ltd. hereby authorize SGS Korea Co., Ltd. to act on our behalf in all matters of certification. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C. 853( a). Any and all acts carried out by SGS Korea on our behalf shall have the same effect as acts of our own. This authorization is valid until further written notice. Sincerely, __________________________ Seung Hoon Choe Senior Researcher Hyundai MOBIS Co., Ltd. HYUNDAI MOBIS CO., LTD. Dec 30, 2025

203, Teheran-ro, Gangnam-gu, Seoul, 06141, Korea Tel. +82-31-260-2707, Fax. +82-31-899-1788 Dec 30, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Request of Confidentiality for FCC ID: TQ8-NBBMUV01 To Whom It May Concern: CONF IDENTIAL LIST Permanent 1 Block Diagram 2 Operational Descriptions 3 Schematics Short-Te r m 4 External Photos 5 Internal Photos 6 Te s t-Setup Photos 7 User’s Manual HYUNDAI MOBIS CO., LTD. The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Seung-Hoon Choe Senior Researcher Hyundai MOIBS Co., Ltd. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Hyundai MOBIS Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04 - 1705. This provision will give HYUNDAI MOBIS CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows:

NBBMUV 01 Label Information Front view of EUT T h e F C C P a r t 1 5 . 1 9 s t a t e m e n t i s i n c l u d e d i n t h e m a n u a l . 2 cm 15 cm I C : 5 0 7 4 A - N B B M U V 0 1

FCC ID: TQ8-NBBMUV01 According to KDB 447498 D04 Interim General RF Exposure Guidance v01 1. MPE-based Exemption General frequency and separation-distance dependent MPE-based effective radiated power (ERP) thresholds are in Table B.1 [Table 1 of § 1.1307(b)(1)(i)(C)] to support an exemption from further evaluation from 300 ㎑ through 100 ㎓. Table 1: THRESHOLDS FOR SINGLE RF SOURCES SUBJECT TO ROUTINE ENVIRONMENTAL EVALUATION RF Source Frequency Minimum Distance Threshold ERP f L (㎒) f H (㎒) λ L / 2π λ H / 2π W 0.3 - 1.34 159 m - 35.6 m 1 920 R2 1.34 - 30 35.6 m - 1.6 m 3 450 R 2 /f 2 30 - 300 1.6 m - 159 mm 3.83 R 2 300 - 1 500 159 mm - 31.8 mm 0.012 8 R 2 f 1 500 - 100 000 31.8 mm - 0.5 mm 19.2 R 2 Subscripts L and H are low and high; λ is wavelength. From § 1.1307(b)(3)(i)(C), modified by adding Minimum Distance columns. The table applies to any RF source (i.e., single fixed, mobile, and portable transmitters) and specifies power and distance criteria for each of the five frequency ranges used for the MPE limits. These criteria apply at separation distances from any part of the radiating structure of at least λ/2π. The thresholds are based on the general population MPE limits with a single perfect reflection, outside of the reactive near-field, and in the main beam of the radiator. For mobile devices that are not exempt per Table B.1 [Table 1 of § 1.1307(b)(1)(i)(C)] at distances from 20 ㎝ to 40 ㎝ and in 0.3 ㎓ to 6 ㎓, evaluation of compliance with the exposure limits in § 1.1310 is necessary if the ERP of the device is greater than ERP 20 ㎝ in Formula (B.1) [repeated from § 2.1091(c)(1) and § 1.1307(b)(1)(i)(B)]. If the ERP is not easily obtained, then the available maximum time-averaged power may be used (i.e., without consideration of ERP only if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole. SAR-based exemptions are constant at separation distances between 20 ㎝ and 40 ㎝ to avoid discontinuities in the threshold when transitioning between SAR-based and MPE-based exemption criteria at 40 ㎝, considering the importance of reflections. 2. RF Exposure Test Exemptions for Single Source Ant. A200 Mode Frequency Range (㎒) Minimum Separation Distance (㎝) Maximum Average Target Power (㏈m) Maximum Tune up (㏈) Maximum Average Output Power Ant. Gain (㏈i) ERP Limits P th (㎽) Ratio Result (㏈m) (㎽) (㏈m) (㎽) Other 2 405 ~ 2 480 20 5.0 2.2 7.2 5.248 2.32 7.37 5.458 3 060 0.002 Pass Ant. A201 Mode Frequency Range (㎒) Minimum Separation Distance (㎝) Maximum Average Target Power (㏈m) Maximum Tune up (㏈) Maximum Average Output Power Ant. Gain (㏈i) ERP Limits P th (㎽) Ratio Result (㏈m) (㎽) (㏈m) (㎽) Other 2 405 ~ 2 480 20 5.0 2.2 7.2 5.248 2.59 7.64 5.808 3 060 0.002 Pass Note ; - ERP (㏈m) = Maximum average power (㏈m) + Antenna gain (㏈i) -2.15 - Maximum average target power is the manufacturer’s declared rated power. - Maximum average output power = Maximum average target power (㏈m) + Maximum tune up (㏈). - The Ant. A200 and the Ant. A201 can not be operated simultaneously 3. Conclusion: No SAR is required.

Model name: NBBMUV01 Item Contents Antenna Type Chip Antenna Antenna peak gain Ant. A200: 2.32 ㏈i Ant. A201: 2.59 ㏈i Manufacturer Pulse (Suzhou) Wireless Products Co, Inc. Address of manufacturer 99 Huo Ju Road #29 Bldg,4 Phase Suzhou New District Jiangsu Province, Suzhou 215009 PR China Model name 3216 2.4G Chip Antenna Test laboratory Pulse (Suzhou) Wireless Products Co, Inc. Size Information Length : 3.2 ㎜ / Width : 1.6 ㎜ Antenna Information Model name: NBBMUV01 3D Radiation Pattern Ant. A200 Ant. A201

SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 2 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) INDEX Table of contents 1. General Information -------------------------------------------------------------------------------------- 3 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emissions ---------- 8 3. 6 ㏈ Bandwidth -------------------------------------------------------------------------------------------- 32 4. Maximum Peak Conducted Output Power --------------------------------------------------------- 36 5. Power Spectral Density --------------------------------------------------------------------------------- 41 6. Antenna Requirement ----------------------------------------------------------------------------------- 45 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 3 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - Designation number: KR0150 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 688 0902 Fax No. : +82 31 688 0921 1.2. Details of Applicant Applicant : HYUNDAI MOBIS CO., LTD. Address : 203, Teheran-ro, Gangnam-gu, Seoul, Republic of Korea, 135-977 Contact Person : Choe, Seung Hoon Phone No. : +82 31 260 0098 1.3. Details of Manufacturer Company : HYUNDAI MOBIS CO., LTD. Address : 95, Sayang 2-gil, Munbaek-myeon, Jjncheon-gun, Chungcheongbuk-do, 27862, Republic of Korea Factory : MYUNGSUNG CO., LTD. Factory Address : 94-13, Saneop-ro 92beon-gil, Gwonseon-gu, Suwon-si, Gyeonggi-do, 16643, Republic of Korea 1.4. Description of EUT Kind of Product Battery Management Unit Model Name NBBMUV01 Serial Number Conducted: C-0001, Radiated: R-0001 Power Supply DC 13.8 V Frequency Range 2 405 ㎒ ~ 2 480 ㎒ Modulation Technique GFSK Number of Channels 16 channels Antenna Type Chip Antenna Antenna Gain ※ Ant. A200 Ant. A201 2.32 ㏈i 2.59 ㏈i H/W Version 2.1 S/W Version WIL 3.3 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 4 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.5. Test Equipment List Equipment Manufacturer Model S/N Cal. Due Cal. Interval Spectrum Analyzer R&S FSV30 103211 02/18/2026 Annual DC POWER SUPPLY Agilent 6674A MY41000836 03/11/2026 Annual Power Sensor R&S NRP-Z81 100669 05/24/2026 Annual Attenuator AEROFLEX / INMET 40AH2W-6 1 03/12/2026 Annual Loop Antenna Schwarzbeck Mess-Elektronik FMZB 1519 1519-039 10/01/2027 Biennial Bilog Antenna Schwarzbeck Mess-Elektronik VULB 9163 01126 03/05/2027 Biennial Horn Antenna R&S HF906 100326 02/24/2026 Annual Horn Antenna Schwarzbeck Mess-Elektronik BBHA 9170 9170-540 12/11/2025 Annual Turn Table Innco systems GmbH DS 1200 S N/A N.C.R. N/A Controller Innco systems GmbH CONTROLLER CO3000-4P CO3000/963/383 30516/L N.C.R. N/A Antenna Mast Innco systems GmbH MA4640-XP-ET MA4640/536/383 30516/L N.C.R. N/A Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/A N.C.R. N/A Coaxial Cable SENSORVIEW NMST-13A26-NMST-5 m TPC2402190004 04/13/2026 Semi- Annual Coaxial Cable SENSORVIEW NMST-13A26-NMST-10 m TPC2402190001 04/13/2026 Semi- Annual Coaxial Cable RFONE PL360P-292M292M-1.5M-A 20200324002 04/10/2026 Semi- Annual EMI Test Receiver R&S ESU26 100109 01/13/2026 Annual Spectrum Analyzer Agilent N9020A MY53421758 09/10/2026 Annual SIGNAL CONDITIONING UNIT R&S SCU18F 101058 02/27/2026 Annual Preamplifier H.P. 8447F 2944A03909 08/07/2026 Annual Preamplifier TESTEK TK-PA1840H 130016 03/13/2026 Annual High Pass Filter Wainwright Instrument GmbH WHK3.0/18G-6SS 4 06/09/2026 Annual High Pass Filter Wainwright Instrument GmbH WLKX10-6320-8000-26500- 40CC 6 10/22/2026 Annual Signal Generator R&S SMA100B 106887 10/20/2026 Annual SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 5 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part15 Subpart C Section Test Item(s) Result 15.205(a) 15.209 15.247(d) Transmitter Radiated Spurious Emissions and Conducted Spurious Emission Pass 15.247(a)(2) 6 ㏈ Bandwidth Pass 15.247(b)(3) Maximum Peak Conducted Output Power Pass 15.247(e) Power Spectral Density Pass 15.207 AC Power Line Conducted Emission NA 1) Note; - The Ant. A200 and the Ant. A201 can not be operated simultaneously 1) The AC power line test was not performed because the EUT use battery power for operation and which do not operate from the AC power lines. 1.7. Test Procedure(s) The measurement procedures described in the American National Standard of Procedure for Compliance Testing of unlicensed Wireless Devices (ANSI C63.10-2020) and the guidance provided in KDB 558074 D01 15.247 Meas Guidance v05r02 were used in the measurement of the DUT. 1.8. Sample Calculation Where relevant, the following sample calculation is provided: 1.8.1. Conducted Test Offset value (㏈) = Attenuator (㏈) + Cable loss (㏈) 1.8.2. Radiation Test Field strength level (㏈㎶/m) = Measured level (㏈㎶) + Antenna factor (㏈/m) + Cable loss (㏈) - Amplifier gain (㏈) + Duty factor (㏈) SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Repo…

Text truncated - open the document above for the full version.

SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 28 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 29 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) Ant. A201 Low Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 30 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) Middle Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 31 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 32 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 3. 6 ㏈ Bandwidth 3.1. Test Setup EUT Attenuator Spectrum Analyzer 3.2. Limit According to §15.247(a)(2), systems using digital modulation techniques may operate in the 902-928 ㎒, 2 400-2 483.5 ㎒, and 5 725-5 850 ㎒ bands. The minimum 6 ㏈ bandwidth shall be at least 500 ㎑. 3.3. Test Procedure The test follows section 11.8 DTS bandwidth of ANSI C63.10-2020. Tests performed using section 11.8.1 Option 1. - Option 1: 1. Set RBW to = shall be in the range of 1% to 5% of the OBW but not less than 100 ㎑. 2. Set the VBW ≥ [3 x RBW]. 3. Detector = peak. 4. Trace mode = max hold. 5. Sweep = No faster than coupled (auto) time. 6. Allow the trace to stabilize. 7. Measure the maximum width of the emission by placing two markers, one at the lowest frequency and the other at the highest frequency of the envelope of the spectral display, such that each marker is at or slightly below the "-6 ㏈ down amplitude”. If a marker is below this “-6 ㏈ down amplitude” value, then it shall be as close as possible to this value. SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 33 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 3.4. Test Results Ambient temperature : (23 ± 1) °C Relative humidity : 47 % - 6 ㏈ Bandwidth ANT. A200 Mode Channel Frequency (㎒) 6 ㏈ Bandwidth (㎒) Minimum Bandwidth (㎑) GFSK Low 2 405 1.349 500 Middle 2 440 1.379 High 2 480 1.359 ANT. A201 Mode Channel Frequency (㎒) 6 ㏈ Bandwidth (㎒) Minimum Bandwidth (㎑) GFSK Low 2 405 1.399 500 Middle 2 440 1.389 High 2 480 1.259 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 34 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) - Test plots - 6 ㏈ Bandwidth Ant. A200 Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 35 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) Ant. A201 Low Channel Middle Channel High Channel SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 36 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 4. Maximum Peak Conducted Output Power 4.1. Test Setup EUT Attenuator Power Sensor Test Note PC 4.2. Limit According to §15.247(b)(3), for systems using digital modulation in the 902-928 ㎒, 2 400-2 483.5 ㎒, and 5 725- 5 850 ㎒ bands: 1 Watt. As an alternative to a peak power measurement, compliance with the one Watt limit can be based on a measurement of the maximum conducted output power. Maximum Conducted Output Power is defined as the total transmit power delivered to all antennas and antenna elements averaged across all symbols in the signaling alphabet when the transmitter is operating at its maximum power control level. Power must be summed across all antennas and antenna elements. The average must not include any time intervals during which the transmitter is off or is transmitting at a reduced power level. If multiple modes of operation are possible (e.g., alternative modulation methods), the maximum conducted output power is the highest total transmit power occurring in any mode. According to §15.247(b)(4), the conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 ㏈i. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 ㏈i are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraph (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in ㏈ that the directional gain of the antenna exceeds 6 ㏈i. SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006504 Page: 37 of 45 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 4.3. Test Procedure The test follows section 11.9.1.2 of ANSI C63.10-2020. PKPM1 Peak-reading power meter method - The maximum peak conducted output power may be measured using a broadband peak RF power meter. The power meter shall have a video bandwidth that is greater than or equal to the DTS bandwidth and shall utilize a fast-responding diode detector. The test follows section 11.9.2.3.2 of ANSI C63.10-2020. Method AVGPM-G (Measurement using a…

Text truncated - open the document above for the full version.