TQ8-SMK-4N03SMART KEY ECU

The SMART KEY ECU is a part of START-STOP BUTTON SYSTEM. It is possible to output the LF(125kHz) signal by pushing the button of door handle and SSB. 1. GENERAL DISCRIPTION If the button of door handle or SSB button is pressed, SMART KEY ECU output Outline of SMART KEY ECU If the button of door handle or SSB button is pressed, SMART KEY ECU output the LF(125kHz) signal. 1) LF signal output for engine start SSB button is pressed, SMART KEY ECU output LF signal through the interior LF antenna 2) LF signal output for door lock/unlock and trunk release The button of door handle or trunk is pressed, SMART KEY ECU output LF signal thtough the LF antenna for Fob searching for Fob searching. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas provoquer de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

16 January 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Request of Confidentiality for FCC ID To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rule the Freedomof Information Act, treatment of certaininformation accompanying this application. The materials contain trade secrets and proprietary information not matters might be harmful to the Applicant and We are also hereby request Short Public Notice DA 04-1705. This provision will give of commerciallysensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as foll CONFIDENTIAL LIST Permanent 1Block Diagram 2Operational Descriptions 3Schematics Short-Term 4External Photos 5Internal Photos 6Test 7User The Applicant understands that pursuant to Rule 0.457, disclosure of accompanyingdocumentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, __________________________ Jongtae Kim Senior Manager Hyundai MOBIS Co., Ltd. Hyundai MOBIS Co., Ltd. #679-4, Yeoksam-dong, Gangnam-gu, Seoul, 135 Tel. 82-31-288-5232/ Fax. 82 Federal Communications Commission Authorization and Evaluation Division Request of Confidentiality for FCC ID:TQ8-SMK-4N03 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of of Information Act,Hyundai MOBIS Co., Ltd.hereby requests confidentiality and information accompanying this application. The materials contain trade secrets on notcustomarily released to the public. The public disclosure of these matters might be harmful to the Applicant andprovide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for180days after the grant as 1705. This provision will giveHyundai MOBIS Co., Ltd.temporary confidentiality sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: Block Diagram Operational Descriptions Schematics External Photos Internal Photos Test-Setup Photos User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure ofthis application and all documentations, where applicable, will not be made public before the date of the Hyundai MOBIS Co., Ltd. gu, Seoul, 135-977, Korea / Fax. 82-31-280-2764 s (CFR 47), and Section 552 (b) (4) of hereby requests confidentiality and information accompanying this application. The materials contain trade secrets customarily released to the public. The public disclosure of these provide unjustified benefits to its competitors. days after the grant asoutlined in temporary confidentiality ows: this application and all documentations, where applicable, will not be made public before the date of the

Hyundai MOBIS Co., Ltd. #679-4, Yeoksam-dong, Gangnam-gu, Seoul, 135-977, Korea Tel. 82-31-288-5232 / Fax. 82-31-280-2764 16 January 2013 Chief, Certification and Engineering Bureau Industry Canada 1241 Clyde Avenue, Ottawa, Ontario, Canada K2C 1Y3 To whom it may concern: I, the undersigned, hereby authorize Lab Manager Feel Jeong of SGS Korea Co., Ltd.(hereafter referred to as SGS Korea) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Feel Jeong of SGS Korea Co., Ltd.on our behalf shall have the same effect as acts of our own. In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a manner; h)ensure that any reference to our product certif documents, brochures or advertising, complies with the requirements of Division; i)keep a record of all complaints made known to the us relating to the product’s with requirements of the rel Certification Division when requested; j)take appropriate action with respect to such complaints and any deficiencies products or services that affect compliance with the requirements for k)document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, __________________________ Jongtae Kim Senior Manager Hyundai MOBIS Co., Ltd. Hyundai MOBIS Co., Ltd. #679-4, Yeoksam-dong, Gangnam-gu, Seoul, 135 Tel. 82-31-288-5232/ Fax. 82 endeavor to ensure that no certificate or report nor any part thereof is used in a ensure that any reference to our product certification in communication media documents, brochures or advertising, complies with the requirements of keep a record of all complaints made known to the us relating to the product’s with requirements of the relevant standard and to make these records Certification Division when requested; take appropriate action with respect to such complaints and any deficiencies products or services that affect compliance with the requirements forcertification; document the actions taken. This authorization is valid until further written notice from the applicant. Hyundai MOBIS Co., Ltd. gu, Seoul, 135-977, Korea / Fax. 82-31-280-2764 endeavor to ensure that no certificate or report nor any part thereof is used in amisleading ication in communication mediasuch as documents, brochures or advertising, complies with the requirements ofthe Certification keep a record of all complaints made known to the us relating to the product’scompliance evant standard and to make these recordsavailable to take appropriate action with respect to such complaints and any deficienciesfound in certification;

External photos of EUT Front view of EUT Rear view of EUT Top view of EUT Bottom view of EUT Side view of EUT

Hyundai MOBIS Co., Ltd. MODEL:SMK-4N03 FCC ID: TQ8-SMK-4N03 IC : 5074A-SMK4N03 Made In Korea

Report Number:F690501/RF-RTL006119Page:2of21 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea INDEX TABLE OF CONTENTS Page 1. General Information -----------------------------------------------------------------------3 2. Field Strength of Fundamental ----------------------------------------------------------5 3. Spurious Emission--------------------------------------------------------------------------10 4. Occupied Bandwidth-----------------------------------------------------------------------14 Report Number:F690501/RF-RTL006119Page:3of21 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 400-2, Gomae-Dong, Giheung-Gu, Yongin-Shi, Kyungki-Do, South Korea 446-901 - Wireless Div. 3FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible athttp://www.sgs.com/en/Terms-and-Conditions.aspx. Telephone:+82 31 428 5700 FAX:+82 31 427 2371 1.2. Details of Applicant Applicant: Hyundai Mobis Co., Ltd. Address:80-9, Mabook-Dong, Giheung-Gu, Yongin-Shi, Gyunggi-Do, 446-912, South Korea Contact Person:Kim, Jong-Tae Phone No.:+82 31 288 6081 Fax No.:+82 31 899 1788 1.3. Description of EUT Kind of Product Smart Key ECU Model Name SMK-4N03 Serial Number N/A Power Supply DC 12 V (Vehicle battery) Frequency Range Tx: 125.00㎑(LF Antenna) Rx: 433.92㎒(RF Antenna) Modulation Technique ASK Number of Channels 1 Operating Conditions-30°C~ 75°C Antenna Type Internal type (Coil Antenna) 1.4. Declarations by the manufacturer - Operation temperature: -30°C~ 75°C - The EUT of antennas cannot operate at the same time. Report Number:F690501/RF-RTL006119Page:4of21 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1.5. Test Equipment List EquipmentManufacturerModelS/NCal. Date Cal. Interval Cal. Due. Spectrum AnalyzerR&SFSL6100768Jul. 05, 2012AnnualJul. 05, 2013 Loop AntennaR&SHFH2-Z2100118Aug. 24, 2011BiennialAug. 24, 2013 Bilog Antenna SCHWARZBECK MESSELEKTRONIK VULB9163396Apr. 27, 2011BiennialApr. 27, 2013 DC Power SupplyAgilentU8002AMY50070064Mar. 29, 2012AnnualMar. 29, 2013 Test ReceiverR&SESU26100109Feb. 21, 2012AnnualFeb. 21, 2013 Antenna MasterINN-COMM4000 N/AN/AN/AN.C.R. Turn TableINN-CODS 1200 S N/AN/AN/AN.C.R. Anechoic ChamberSY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/AN/AN/AN.C.R. 1.6. Test Report Revision RevisionReport numberDescription 0F690501/RF-RTL006119Initial 1.7. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15 Subpart B&C 15.209/ IC RSS-210 Issue8, RSS-Gen Issue3 Section in FCC 15 Subpart B&C§15.209 Section in IC RSS-210 Issue8, RSS-Gen Issue 3 Test ItemResult 15.209(a) RSS-210 Issue8, 2.5.1 RSS-Gen Issue3, 7.2.5 Table 6 Radiated emission, Spurious Emission and Field Strength of Fundamental Complied -RSS-Gen Issue3, 4.6.1Occupied BandwidthComplied Report Number:F690501/RF-RTL006119Page:5of21 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 2. Field Strength of Fundamental 2.1. Test Setup The diagram below shows the test setup that is utilized to make the measurements for emission from 9㎑to 30㎒Emissions. The diagram below shows the test setup that is utilized to make the measurements for emission from 30㎒to 1㎓Emissions. Report Number:F690501/RF-RTL006119Page:6of21 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 2.2. Limit 2.2.1. Radiated emission limits, general requirements Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency (㎒) Field Strength (microvolts/meter) Measurement Distance (meter) 0.009 – 0.4902400/F(㎑)300 0.490 – 1.70524000/F(㎑)30 1.705 – 30.03030 30 -88100**3 88 -216150**3 216 - 960200**3 Above 9605003 ** Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72㎒, 76-88㎒, 174-216㎒or 470-806㎒. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241 Report Number:F690501/RF-RTL006119Page:7of21 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SG…

Text truncated - open the document above for the full version.

Test setup photo of EUT A. Photo of Test setup