TTUBSA5Wireless Speaker

Beosound A5 Beosound A5 Important Info.indd 1ound A5 Important Info.indd 12023/1/6 11:27:042023/1/6 11:27:04 2 Beosound A5 Important Info.indd 2ound A5 Important Info.indd 22023/1/6 11:27:042023/1/6 11:27:04 3 Se yderligere oplysninger på: Für weitere Informationen, siehe: For additional information, see (link provides content with regulatory conformance guidelines): Si desea obtener más información, visite el sitio web: Lisätietoja saat seuraavista osoitteista: Pour plus d’informations, visitez (lien fournit du contenu aux directives de conformité réglementaires): Per ulteriori informazioni, vedere: Voor meer informatie, zie: Para obter mais informações, consulte: Mer information finns på: https://www.bang-olufsen.com/support Beosound A5 Important Info.indd 3ound A5 Important Info.indd 32023/1/6 11:27:042023/1/6 11:27:04 4 Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. AirPlay works with iPhone, iPad, and iPod touch, or Mac and PC with iTunes. Airplay, iPad, iPhone, iPod touch, iTunes and Mac are trademarks of Apple Inc., registered in U.S. and other countries. The trademark “iPhone” is used in Japan with a license from Airphone K.K. This wireless speaker supports AirPlay 2 and Beosound A5 Important Info.indd 4ound A5 Important Info.indd 42023/1/6 11:27:052023/1/6 11:27:05 5 In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU: Bang & Olufsen A/S declares that the radio equipment complies with Directive 2014/53/EU (RED). The full Declaration of Conformity can be found at: on.beo.com/beosound-a5-support ȋȆȋȅ~5725MHz 6~8.5GHz 20 20 20 0dBm/50MHz 0.27dBuA/m@10m 110.5-205KHz 2402~2480MHz 2412~2472MHz ENGLISH 50MHz Beosound A5 Important Info.indd 5ound A5 Important Info.indd 52023/1/6 11:27:062023/1/6 11:27:06 6 Persoonlijke gegevens moeten worden verwijderd voordat het a pparaat wordt afgedankt. Important Safety and Care Instructions • Read these instructions. Keep these instructions. • Note all warnings and follow all instructions. • To ensure correct and safe usage of this apparatus, make sure that the apparatus is set up and connected to other multimedia systems in accordance with manufacturers’ instructions. Do not connect the apparatus to the mains, until you have first connected all the cables to the apparatus and only use attachments/accessories specified by the manufacturer. • Use apparatus within a temperature range of 10-40°C (50-105°F) and do not subject this apparatus to high humidity, rain or heat. • Only clean with a dry cloth. • Do not place any metallic items on the wireless charging surface as it will affect the wireless charging functionality. • Do not block any ventilation openings and leave enough space around the apparatus to allow for adequate ventilation. • Do not place apparatus near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Personal data must be deleted before disposal. Beosound A5 Important Info.indd 6ound A5 Important Info.indd 62023/1/6 11:27:062023/1/6 11:27:06 7 • Avoid placing the apparatus in direct sunlight or direct artificial light, such as a spotlight. • Do not place any naked flame sources, such as lighted candles, on any surface of the apparatus. • The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. • WARNING: To reduce risk of fire or electric shock, !nsure that no objects filled with liquids, such as vases, are placed on the apparatus. • CAUTION: To prevent electric shock hazard, do not connect the apparatus to mains power supply, while cover is removed. • Protect the power supply cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • If the provided plug does not fit into your outlet, buy a plug that fits from your Bang & Olufsen retailer. • The supplied USB-C PD adapter (DSA-45PDH) is specially designed for this apparatus. Do not change the plug, and if the mains cord is damaged, you must buy a new one from your Bang & Olufsen retailer. • The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and Beosound A5 Important Info.indd 7ound A5 Important Info.indd 72023/1/6 11:27:062023/1/6 11:27:06 maintenance (servicing) instructions in the literature accompanying the product. 8 • Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power-supply cord or plug is damaged, objects have fallen into the apparatus, the apparatus does not operate normally, or has been dropped. • WARNING: Do not expose the battery/batteries/battery pack to excessive heat such as sunshine, fi re or the like. • CAUTION: Do not attempt to replace the battery by yourself. Danger of explosion exists if battery is incorrectly replaced or non-equivalent type used. To replace the battery, please contact your Bang & Olufsen retailer. • Always place your product on a fi rm and stable surface when in use. Beosound A5 Important Info.indd 8ound A5 Important Info.indd 82023/1/6 11:27:072023/1/6 11:27:07 9 ĥ + !(č !+/+1*
Ć Beosound A5 Important Info.indd 9ound A5 Important Info.indd 92023/1/6 11:27:082023/1/6 11:27:08 10 Bang & Olufsen A/S declares that the radio equipment complies with Directive 2014/53/EU (RED). The full Declaration of Conformity can be found at: on.beo.com/beosound-a5-support ȋȆȋȅ~5725MHz 6~8.5GHz 20 20 20 0dBm/50MHz 0.27dBuA/m@10m 110.5-205…

Text truncated - open the document above for the full version.

Bang & Olufsen a/s * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 2/11/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: TTUBSA5 Per section 2.911(d)(7) of the FCC rules, Bang & Olufsen a/s (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Bang & Olufsen America Inc. FCC Registration Number (FRN): 0033412057 Physical U.S. Company Address: 79 WALKER STREET, 4TH FLOOR, NEW YORK, NY 10013 Contact Person: Nikolaj Fruensgard Kristensen Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different to Applicant): Signed: Signed: Printed name: Marlon Schrimpf Printed name: Nikolaj Fruensgard Kristensen Title: Product Compliance Lead Title: Director, Finance and Commercial Operations Company Name: Bang & Olufsen a/s Company Name: Bang & Olufsen America Inc. Date: 2/17/2023 Date: 2/17/2023

Bang & Olufsen a/s Covered Equipment Certification Attestation Letter 2/13/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: TTUBSA5 Bang & Olufsen a/s (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Marlon Schrimpf Title: Product Compliance Lead Company Name: Bang & Olufsen a/s Date: 2/13/2023

Bang & Olufsen a/s Covered Equipment Certification Attestation Letter 2/13/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: TTUBSA5 Bang & Olufsen a/s (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Signed: Printed name: Marlon Schrimpf Title: Product Compliance Lead Company Name: Bang & Olufsen a/s Date: 2/13/2023

DATE : 2/13/2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint EST Technology Co., Ltd. Address:Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Bang & Olufsen a/s Address: Bang og Olufsen Alle 1, 7600 Struer, Denmark <Signature> Name：Marlon Schrimpf Title：Product Compliance Lead Applicant Company：Bang & Olufsen a/s

DATE : 2/13/2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name：Marlon Schrimpf Title：Product Compliance Lead Company：Bang & Olufsen a/s

DATE : 2/13/2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: TTUBSA5 Product Name: Wireless Speaker Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name：Marlon Schrimpf Title：Product Compliance Lead Company：Bang & Olufsen a/s

DATE : 2/13/2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: TTUBSA5 Product Name: Wireless Speaker Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: ⚫ Test Setup Photos ⚫ External Photos ⚫ Internal Photos ⚫ User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. <Signature> Name：Marlon Schrimpf Title：Product Compliance Lead Company：Bang & Olufsen a/s

External Photos M/N: Beosound A5 External Photos M/N: Beosound A5 External Photos M/N: Beosound A5 External Photos M/N: Beosound A5 External Photos M/N: Beosound A5 External Photos M/N: Beosound A5 External Photos M/N: Beosound A5 External Photos M/N: Beosound A5 External Photos M/N: Beosound A5

47.4 102 Contains FCC ID: TLZ-XM9098 Contains IC: 6100A-XM9098 Made in China 中国制造 中國製造 Bang og Olufsen Allé 1, 7600 Struer, Denmark. Designed by Bang & Olufsen in Denmark. 产品名称/產品名稱: 无线音箱/無線音箱 Wireless Speaker Manufacturer/制造商/製造商: Input/输入/輸入: 15V 3A IC: 3775B-BSA5 FCC ID: TTUBSA5 CAN ICES-3(B)/ NMB-3(B) Type No.: Item No.: Serial No.: Bang & Olufsen A/S Output/输出/輸出(Wireless Charging): 5W/5Vdc *정격전압에서만사용하세요 *고장시A/S센터로연락바랍니다전전기용품안전관리법에의한표시 제조국:중국 A/S연락처: 82-02-421-1380 인증번호:R-R-BOA-BSA5; R-R-TLZ-XM458 제조자: DONGGUAN TYMPHANY ACOUSTIC TECHNOLOGY CO.LTD UK-Importer: Bang & Olufsen UK Ltd, 7 Albemarle Street, London, W1S 4HQ, United Kingdom T304004269000 T304004269000 T02-546030501 100#网格PET+可打印哑膜 ● 发行 1 Third Angle Projection Part No. Cus. Model No. Tymphany Model No. Part Name. ±3.0±3.0±2.0±2.0 Ofcial Issue Tooling Sample Quotation >2500~ Tolerance Angular ±0.25° JHGFDimension ±0.15 ±0.25 ±0.4 ±0.8 ±1.7 ±0.3 ±0.4 ±0.6 ±1.5 ±0.6 ±0.3 ±0.2 ±0.2 ±0.15 ±0.1±0.1 ±1.0 ±1.0 >800~2500 >250~800 >80~250 >25~80 >8~25 0~8 ±1.0 ±0.5 ±0.25 ±0.12 ±0.08 ±0.05 MMUnit : Scale : 1/1 A4Sheet : Size : Approved ByDrawn By Checked By Date By REV. ECN No. Description 1 DWG No. Version NO. Note: 1. Interpret dimensions and tolerances per ASME Y14.5 2009. 尺寸与公差标注规范参考标准：ASME Y14.5 2009 2. Parts shall be approved by Tymphany Engineering prior to mass production. 所有零部件都需迪芬尼工程师确定后才可生产。 3. indicates dimension is CPK dimension. ■ indicates design-critical dimension. both are the dimensions that IQC must check. ⃝number indicate dimension is FAI dimension.Supplier must establish quality control plan for these dimensions. 内标识的尺寸为CPK尺寸,有"■"标识的尺寸为重要管控尺寸,两者为IQC必测尺寸；⃝内数字编号的尺寸为FAI尺寸,供应商 须依图标全尺寸做品质管控计划； 4. Comply with Tymphany QSI057-1031 'Green ProductC hemical Substances Specication'. 符合QSI057-1031绿色产品化学物质限用规格; 5. Follow customer’s specication as required. When customer’s environmental requirements has conict with TYM’s requirements, the stricter one should be followed. 符合客户的要求,当客户的环保要求与TYM的要求相冲突时，应遵循更严格的要求。 6. 无卤要求/ Halogen- Free requirement：Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm； 是否需要满足无卤要求/if need follow Halogen- Free requirement 需要/Yes ■ / 不需要/No □ (用“■”标识选择/Follow item marked“■”) 7. All dimensions and tolerances indicated on the drawing indicate delivered part dimensions; All dimensions not indicated on the drawing are per 3D model. 来料部件或产品的尺寸及公差需符合图纸标识，未标识的尺寸请参照3D 8. Material(材质): Weight(重量) :±%g 9. Finishing(表面处理): 。 1:1 单编：TTR4-001 REV：10 Baojin Chen 2022/08/08 DP5 Baojin.Chen Dp5 PRODUCT LABEL Beosound A5 CMIIT ID:XXXXXXXXX 210-204191 R32424 CCAF22Y1020AT1 本產品內含模組 XXXXXXXXXXXX 当該機器には電波法施行規則第46条の21項五に基づく誘導式読み書き通 線設備を装着している。認証番号: 201-210611 信設備：第201-210611号を装着している。電波法により5.2/5.3 GHz帯 は屋内使用に限ります。

Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 Internal Photos M/N: Beosound A5 UWB Ant Internal Photos M/N: Beosound A5 BLE Ant BLE Module Internal Photos M/N: Beosound A5 UWB Module Internal Photos M/N: Beosound A5

FCC ID: TTUBSA5 EST Technology Co. ,Ltd Report No. ESTE-R2212318 Page 1 of 5 FCC 47 CFR MPE REPORT Bang & Olufsen a/s Wireless Speaker Model Number: Beosound A5 FCC ID: TTUBSA5 Applicant: Bang & Olufsen a/s Address: Bang og Olufsen Alle 1, 7600 Struer, Denmark Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2212318 Date of Test: Oct. 26~Dec. 26, 2022 Date of Report: Dec. 30, 2022 FCC ID: TTUBSA5 EST Technology Co. ,Ltd Report No. ESTE-R2212318 Page 2 of 5 Maximum Permissible Exposure 1. Applicable Standards Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. 1.1. Limits for Maximum Permissible Exposure (MPE) (a) Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density FCC ID: TTUBSA5 EST Technology Co. ,Ltd Report No. ESTE-R2212318 Page 3 of 5 1.2. MPE Calculation Method E (V/m) = d G × P × 30 Power Density: Pd (W/m 2 ) = 377 E 2 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 d × 377 G × P × 30 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained FCC ID: TTUBSA5 EST Technology Co. ,Ltd Report No. ESTE-R2212318 Page 4 of 5 2. Conducted Power Result LE Audio Module Mode Frequency (MHz) Peak output power (dBm) Peak output power (mW) BLE 1M 2402 -0.72 0.8472 2440 -1.11 0.7745 2480 -0.94 0.8054 BLE 2M 2402 -0.52 0.8872 2440 -0.90 0.8128 2480 -0.64 0.8630 UWB Module Mode Frequency (MHz) EIRP (dBm/50MHz) EIRP (mW/50MHz) UWB 6489.6 -2.15 0.610 FCC ID: TTUBSA5 EST Technology Co. ,Ltd Report No. ESTE-R2212318 Page 5 of 5 3. Calculated Result and Limit LE Audio Module Mode Peak output power (dBm) Target power (dBm) MAX Target power (dBm) Antenna gain Power Density (S) (mW /cm 2 ) Limited of Power Density (S) (mW /cm 2 ) Test Result (dBi) (Linear) BLE -0.52 0±1 1 2.21 1.6634 0.0004 1 Complies UWB Module Mode EIRP (dBm/50MHz) Target EIRP (dBm/50MHz) MAX Target EIRP (dBm/50MHz) Power Density (S) (mW /cm 2 ) Limited of Power Density (S) (mW /cm 2 ) Test Result UWB -2.15 -3±1 -2 0.0001 1 Complies Simultaneous Transmission Analysis Mode: LE Audio+ UWB+ WPT+ Contain Module Module Result Limit Simultaneous Transmissions Result Simultaneous Transmissions Limit Total Result LE Audio 0.0004 1 0.824 1 Complies UWB 0.0001 1 WPT 0.201 1.630 Contain Module 0.70 1 End of Test Report

FCC ID: TTUBSA5 EST Technology Co., Ltd Report No.ESTE-R2212316 Page 1 of 60 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Bang & Olufsen a/s Wireless Speaker Model Number: Beosound A5 FCC ID: TTUBSA5 Applicant : Bang & Olufsen a/s Address: Bang og Olufsen Alle 1, 7600 Struer, Denmark Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2212316 Date of Test: Oct. 26~Dec. 26, 2022 Date of Report: Dec. 30, 2022 FCC ID: TTUBSA5 EST Technology Co., Ltd Report No.ESTE-R2212316 Page 2 of 60 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................. 5 1.1. Description of Device (EUT) ........................................................................................................... 5 1.2. Antenna Information ........................................................................................................................ 5 1.3. Information of RF Cable .................................................................................................................. 5 2. SUMMARY OF TEST ......................................................................................................................... 6 2.1. Summary of test result ...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Measurement uncertainty ................................................................................................................. 8 2.4. Assistant equipment used for test ..................................................................................................... 8 2.5. Block Diagram ................................................................................................................................. 8 2.6. Test Mode ......................................................................................................................................... 9 2.7. Power Setting of Test Software ........................................................................................................ 9 2.8. Duty Cycle ...................................................................................................................................... 10 2.9. Channel List ................................................................................................................................... 11 2.10. Test Equipment List ....................................................................................................................... 12 3. 6DB BANDWIDTH .......................................................................................................................... 14 3.1. Limit ............................................................................................................................................... 14 3.2. Test Setup ....................................................................................................................................... 14 3.3. Spectrum Analyzer Setting ............................................................................................................. 14 3.4. Test Procedure ................................................................................................................................ 14 3.5. Test Result ...................................................................................................................................... 14 4. MAXIMUM PEAK OUTPUT POWER ................................................................................................. 15 4.1. Limit ............................................................................................................................................... 15 4.2. Test Setup ....................................................................................................................................... 15 4.3. Spectrum Analyzer Setting ............................................................................................................. 15 4.4. Test Procedure ................................................................................................................................ 15 4.5. Test Result ...................................................................................................................................... 15 5. POWER SPECTRAL DENSITY .......................................................................................................... 16 5.1. Limit ............................................................................................................................................... 16 5.2. Test Setup ....................................................................................................................................... 16 5.3. Spectrum Analyzer Setting ............................................................................................................. 16 5.4. Test Procedure ................................................................................................................................ 16 5.5. Test Result ...................................................................................................................................... 16 6. CONDUCTED BAND EDGE ............................................................................................................. 17 6.1. Limit ............................................................................................................................................... 17 6.2. Te…

Text truncated - open the document above for the full version.

UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：靳静 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-P-LA-00-017 Specification DOCUMENT PAGE REV. NO. A0 PAGE 1 OF 6 WAG-P-LA-00-017 Specification 1. Explanation of part number： WAG _ P _ LA _ 00 _ 017 (1) (2) (3) (4) (5) (1) Product Type：Wireless Antenna (2) Material：PCB (3) Frequency：2400-2500MHz (4) Coaxial Cable Type：00 (5) Suffix：017 2. Storage Condition: Temperature -40 to +70°C Humidity 65±20 % RH 3. Operating Condition: Temperature -40 to +70°C Humidity 65±20 % RH 4. Electrical Specification： Those specifications were specially defined for 迪芬尼HZ DP5 BLE antenna model, and all characteristics were measured under the model’s handset testing. 4-1. Frequency Band: Frequency Band MHz BLE 2400-2500 UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：靳静 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-P-LA-00-017 Specification DOCUMENT PAGE REV. NO. A0 PAGE 2 OF 6 4-2. Impedance 50 ohm nominal 4-3. Matching circuit None 4-4. VSWR 4-4.1 Measuring Method 1.A 50Ωcoaxial cable is connected to the antenna. Then this cable is connected to a network analyzer to measure the VSWR 2.Keeping this jig away from metal at least 20cm 4-4.2 Measurement frequency points and VSWR value Frequency (Unit MHz) 2400 2450 2500 VSWR 1.45 1.70 1.41 UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：靳静 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-P-LA-00-017 Specification DOCUMENT PAGE REV. NO. A0 PAGE 3 OF 6 4-5. Efficiency and Gain 4-5.1 Measure method 1. Using a low loss coaxial cable to link a standard handset jig 2. Fixed this handset jig on chamber’s rotator plane 3. Linking jig into network analyzer port and using a probing horn antenna to collect data. 4. Using another standard gain horn antenna to calibrated those data 4-5.2 Chamber definition 1. An anechoic chamber (7mx4mx3m) which satisfied far-field condition was applied to avoid multi-path effect 2. The quite room region is 40cmx40cmx40cm at the center of rotator 3. The distance between DUT and standard antenna is 4.38 m 4. Probing antenna (9120D horn antenna) and standard gain horn antenna (BBHA9120 LPF 700MHz ~6GHz) 4.38 m Rotatory controller Vector Network Aanlyzer Port 2Port 1 DUT Far-Field Chamber Std. Ant. UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：靳静 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-P-LA-00-017 Specification DOCUMENT PAGE REV. NO. A0 PAGE 4 OF 6 4-5.3 Efficiency and Gain Antenna gain is marked (dBi) and is based on STANDARD HORN antenna. The data shows Peak Gain and Average Gain. 2.4G 2D&3D Radiation Pattern Frequency (MHz) 2400 2450 2500 Efficiency (%) 40.5 40.93 40.07 Gain (dBi) 2.21 1.88 1.34 UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：靳静 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-P-LA-00-017 Specification DOCUMENT PAGE REV. NO. A0 PA…

Text truncated - open the document above for the full version.