TUQVMR2Evoluent VerticalMouse Receiver

Evoluent VerticalMouse 4 Wireless – Right Hand User Manual Operation procedure 1. Insert AA batteries to the RF mouse, and close the battery door. 2. Plug in the Receiver to the USB port of PC. Note: When batteries are out of power, RF mouse can still work. Just simply connect PC and mouse with retractable cable, but the Receiver must stay on the USB port of PC. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

K-WELL INTERNATIONAL CORP. 10F, NO. 57, SEC. 4, JHONGSIAO E. RD., DA-AN DIST. TAIPEI CITY TAIWAN Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:06/10/2011 To whom it may concern: We, the undersigned, hereby authorize Worldwide Testing Services (Taiwan) Co., Ltd to act on our behalf in all matters relating to applications for equipment authorization FCC ID: TUQVMR2 including the signing of all documents related to these matters. Any and all acts carried out by Worldwide Testing Services (Taiwan) Co., Ltd on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Signature Name: ALAN Title: ENGINEER Company: K-WELL INTERNATIONAL CORP.

K-WELL INTERNATIONAL CORP. 10F, NO. 57, SEC. 4, JHONGSIAO E. RD., DA-AN DIST. TAIPEI CITY TAIWAN Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 06/10/11 Request for Confidentiality Company name: K-WELL INTERNATIONAL CORP. FCC ID: TUQVMR2 FCC Part 15 Certification To whom it may concern: In accordance with 0.459 of CFR 47, K-WELL INTERNATIONAL CORP. hereby requests confidentiality of all Block Diagrams, Schematics, Operational Description attachments for the subject application. These documents contain detailed system and equipment description and related information about the product which K-WELL INTERNATIONAL CORP.considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, K-WELL INTERNATIONAL CORP. considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Signature Name: ALAN Title: ENGINEER Company: K-WELL INTERNATIONAL CORP.

Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 2 of 12 External Photos Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 3 of 12 Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 4 of 12 Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 5 of 12

Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 6 of 12 Internal Photos Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 7 of 12 Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 8 of 12

of Applicant: K-WELL INTERNATIONAL CORP. Address: 10F, NO. 57, SEC. 4, JHONGSIAO E. RD., DA-AN DIST. TAIPEI CITY TAIWAN Tested and Prepared by Worldwide Testing Services (Taiwan) Co., Ltd. FCC Registration No.: 930600 Industry Canada filed test laboratory Reg. No. IC 5679A-1 A2LA Accredited No.: 2732.01 Report No.: W6M21108-11762-C-1 6F, NO. 58, LANE 188, RUEY-KUANG RD., NEIHU TAIPEI 114, TAIWAN, R.O.C. TEL: 886-2-66068877 FAX: 886-2-66068879 E-mail: [email protected] FCC PART 15 SUBPART C TEST REPORT for Evoluent VerticalMouse Receiver Model No.: VMR2 FCC ID: TUQVMR2 Registration number: W6M21108-11762-C-1 FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd. Page 1 of 24 TABLE OF CONTENTS 1 GENERAL INFORMATION ..........................................................................................................2 1.1 NOTES..........................................................................................................................................2 1.2 TESTING LABORATORY................................................................................................................3 1.2.1 Location ..............................................................................................................................3 1.2.2 Details of accreditation status ............................................................................................3 1.3 DETAILS OF APPROVAL HOLDER...................................................................................................3 1.4 APPLICATION DETAILS.................................................................................................................4 1.5 GENERAL INFORMATION OF TEST ITEM........................................................................................4 1.6 T EST STANDARDS.........................................................................................................................4 2 TECHNICAL TEST .........................................................................................................................5 2.1 SUMMARY OF TEST RESULTS........................................................................................................5 2.2 T EST ENVIRONMENT....................................................................................................................5 2.3 TEST EQUIPMENT LIST.................................................................................................................6 2.4 GENERAL TEST PROCEDURE......................................................................................................10 3 TEST RESULTS (ENCLOSURE) ................................................................................................11 3.1 P EAK OUTPUT POWER (TRANSMITTER) ......................................................................................12 3.2 EQUIVALENT ISOTROPIC RADIATED POWER................................................................................14 3.3 RF EXPOSURE COMPLIANCE REQUIREMENTS............................................................................14 3.4 O UT OF BAND RADIATED EMISSIONS.........................................................................................14 3.5 SPURIOUS EMISSION (TX) ...........................................................................................................15 3.6 R ADIATED EMISSIONS FROM DIGITAL PART..............................................................................19 3.7 RADIATED EMISSION ON THE BAND EDGE..................................................................................20 3.8 P OWER LINE CONDUCTED EMISSION.........................................................................................22 A PPENDIX..................................................................................................................................................24 Registration number: W6M21108-11762-C-1 FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd. Page 2 of 24 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the Worldwide Testing Services(Taiwan) Co., Ltd. Tester: October 06, 2011 Rick Chen Date WTS-Lab. Name Signature Technical responsibility for area of testing: October 06, 2011 Chang Tse-Ming Date WTS Name Signature Registration number: W6M21108-11762-C-1 FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd. Page 3 of 24 1.2 Testing laboratory 1.2.1 Location OATS No.5-1, Lishui, Shuang Sing Village, Wanli Dist., New Taipei City 207, Taiwan (R.O.C.) 3 meter semi-anechoic chamber No.35, Aly. 21, Ln. 228, Ankang Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) TEL:886-2-6613-0228 FAX:886-2-2791-5046 Company Worldwide Testing Services(Taiwan) Co., Ltd. 6F, NO. 58, LANE 188, RUEY-KUANG RD. NEIHU, TAIPEI 114, TAIWAN R.O.C. Tel : 886-2-66068877 Fax : 886-2-66068879 1.2.2 Details of accreditation status Accredited testing laboratory A2LA accredited number: 2730.01 FCC filed test laboratory Reg. No. 930600 Industry Canada filed test laborat…

Text truncated - open the document above for the full version.

Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 9 of 12 Set Up Photo of Radiated Emission EMI Below 1GHz Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 10 of 12 Above 1GHz Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 11 of 12 RF Registration number: W6M21108-11762-FCC FCC ID: TUQVMR2 Worldwide Testing Services(Taiwan) Co., Ltd.Appendix page 12 of 12 Set Up Photo of Conducted Emission