TX4SD01ASmart Home Sensor

Press Pairing button on the sensors once. Pairing button CR2032 Coin cell (1ea) Metal Pairing Pin (1ea) 1. The sensors retry to pair with a red color LED blinking. 2. The method of the registration as pairing is done.(Should check the list on the smart phone.) User can edit the text regarding registered sensors on DSR application. The gateway and the sensor will try pairing for 40seconds. If they are failed to be paired within 40seconds, the orange LED will be o. 3. Pull battery tab from the sensor to try pairing with the gateway. (The sensor will try pairing for 40seconds.) 4. Once orange LED is o, pairing is done. 1. Press pairing button on the gateway. 2. The orange LED will blink then the gateway turn into the pairing standby mode. (The orange LED will keep blink -ing for 60seconds.) Please refer to this when changing the battery or using screws. Sensor is designed to try pairing when pull tab is initially removed Pairing failure Pairing button ! Please follow below instruction in case pairing is failed. ( This product is working with ethernet gateway. ) Pairing Guide Document Number : Rev. 1.0 IntroductionPackage Contents Bottom cover Top case Screw B (2ea) Double sided tape Battery holder Option Screw A (2ea) Wireless Movement Sensor Movement sensor can report the gateway via radio communications door/window state, open or close by recognizing door movement. Low voltage communication and embedded RF amplier can provide a wide range of communication. The sensor uses CR2032 coin cell battery. Battery lifetime is apporx. 5years. In case of damage, sensor can detects damage and notify Ethernet gateway. User can easily install using double sided tape. [The sensor supplied with] This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Protocols : Zigbee HA Supported channels : IEEE802.15.4 CH11 to CH26 RF Performance Requirements • Reorient or relocate the receiving antenna. • Increase or decrease the separat ion be-tween the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that which the receiver is connected. • Consult the dealer or an experienced remote control/TV technician for help. • It is strongly recommended that the TV be plugg -ed into a separate wall outlet. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer ence in a residential installation. This equip -ment generates, uses, and can radiate radio requency energy and, if not used in accordance with the instructions, may cause harmful interfer ence to radio communicat ions. There is no guarantee that interfer ence will not occur in a particular installation. If this equipment does cause harmful interfer ence to radio or television recep -tion, the user is encouraged to try to correct the interfer ence by one or more of the fol lowing measures : The user is cautioned that changes and modica -tions made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two condi -tions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. “CAUTION” : Exposure to Radio Frequency Radia -tion. Antenna shall be mounted in such a manner to minimize the potential for human contact to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. “CAUTION” : Exposure to Radio Frequency Radia -tion. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with minimum distance of 20cm between the radiator and your body. This transmit -ter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. FCC Compliance Statement Remove Insert 1 Open Top case Battery change Attach double sided tape Install on wall 2 Installation Guide 1 1 Specications Dimensions L= 28mm, W= 54.5mm, H= 11.3mm Power source CR2032(3V) Lithium Battery 1ea Battery Lifetime Relative Humidity 5 years at 25°C (77°F), typical, Indoor use 0°C ~50°C, Indoor use up to 95% non-condensing Operating Temperature Storage Temperature -10°C ~ 60°C How to x using screws Replace battery with arrow direction. 3 2 unscrew a screw. (see arrow) + CR2032

Press Pairing button on the sensors once. Pairing button CR2032 Coin cell (1ea) Metal Pairing Pin (1ea) 1. The sensors retry to pair with a red color LED blinking. 2. The method of the registration as pairing is done.(Should check the list on the smart phone.) User can edit the text regarding registered sensors on DSR application. The gateway and the sensor will try pairing for 40seconds. If they are failed to be paired within 40seconds, the orange LED will be o. 3. Pull battery tab from the sensor to try pairing with the gateway. (The sensor will try pairing for 40seconds.) 4. Once orange LED is o, pairing is done. 1. Press pairing button on the gateway. 2. The orange LED will blink then the gateway turn into the pairing standby mode. (The orange LED will keep blink -ing for 60seconds.) Please refer to this when changing the battery or using screws. Sensor is designed to try pairing when pull tab is initially removed Pairing failure Pairing button ! Please follow below instruction in case pairing is failed. ( This product is working with ethernet gateway. ) Pairing Guide Document Number : Rev. 1.0 IntroductionPackage Contents Bottom cover Top case Screw B (2ea) Double sided tape Battery holder Option Screw A (2ea) Wireless Movement Sensor Movement sensor can report the gateway via radio communications door/window state, open or close by recognizing door movement. Low voltage communication and embedded RF amplier can provide a wide range of communication. The sensor uses CR2032 coin cell battery. Battery lifetime is apporx. 5years. In case of damage, sensor can detects damage and notify Ethernet gateway. User can easily install using double sided tape. [The sensor supplied with] This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Protocols : Zigbee HA Supported channels : IEEE802.15.4 CH11 to CH26 RF Performance Requirements • Reorient or relocate the receiving antenna. • Increase or decrease the separat ion be-tween the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that which the receiver is connected. • Consult the dealer or an experienced remote control/TV technician for help. • It is strongly recommended that the TV be plugg -ed into a separate wall outlet. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer ence in a residential installation. This equip -ment generates, uses, and can radiate radio requency energy and, if not used in accordance with the instructions, may cause harmful interfer ence to radio communicat ions. There is no guarantee that interfer ence will not occur in a particular installation. If this equipment does cause harmful interfer ence to radio or television recep -tion, the user is encouraged to try to correct the interfer ence by one or more of the fol lowing measures : The user is cautioned that changes and modica -tions made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two condi -tions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. “CAUTION” : Exposure to Radio Frequency Radia -tion. Antenna shall be mounted in such a manner to minimize the potential for human contact to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. “CAUTION” : Exposure to Radio Frequency Radia -tion. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with minimum distance of 20cm between the radiator and your body. This transmit -ter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. FCC Compliance Statement Remove Insert 1 Open Top case Battery change Attach double sided tape Install on wall 2 Installation Guide 1 1 Specications Dimensions L= 28mm, W= 54.5mm, H= 11.3mm Power source CR2032(3V) Lithium Battery 1ea Battery Lifetime Relative Humidity 5 years at 25°C (77°F), typical, Indoor use 0°C ~50°C, Indoor use up to 95% non-condensing Operating Temperature Storage Temperature -10°C ~ 60°C How to x using screws Replace battery with arrow direction. 3 2 unscrew a screw. (see arrow) + CR2032

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 June 05, 2015 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Remote Solution Co., Ltd., hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (Smart Home Sensor, SD01A) FCC ID: TX4SD01A Sincerely, ____________________________ Client’s signature : Remote Solution Co., Ltd. Client’s name / title : Byung-Cheol, Kim / Manager Contact information / address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Telephone: +82-54-420-4517 Fax No.: +82-54-420-4530 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 4.0 June 05, 2015 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: TX4SD01A We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e.g. Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ____________________________ Client’s signature : Remote Solution Co., Ltd. Client’s name / title : Byung-Cheol, Kim / Manager Contact information / address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Telephone: +82-54-420-4517 Fax No.: +82-54-420-4530 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 4.0 June 05, 2015 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: TX4SD01A To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - User Manual - External Photos - Internal Photos - Test Setup photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ____________________________ Client’s signature : Remote Solution Co., Ltd. Client’s name / title : Byung-Cheol, Kim / Manager Contact information / address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Telephone: +82-54-420-4517 Fax No.: +82-54-420-4530 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 4.0 June 05, 2015 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: TX4SD01A We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e.g. Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ____________________________ Client’s signature : Remote Solution Co., Ltd. Client’s name / title : Byung-Cheol, Kim / Manager Contact information / address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Telephone: +82-54-420-4517 Fax No.: +82-54-420-4530 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 4.0 June 05, 2015 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: TX4SD01A To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - User Manual - External Photos - Internal Photos - Test Setup photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ____________________________ Client’s signature : Remote Solution Co., Ltd. Client’s name / title : Byung-Cheol, Kim / Manager Contact information / address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Telephone: +82-54-420-4517 Fax No.: +82-54-420-4530 E-mail: [email protected]

Page 1 of 6 Page 2 of 6 Page 3 of 6 Page 4 of 6 Page 5 of 6 Page 6 of 6

Page 1 of 6 Page 2 of 6 Page 3 of 6 Page 4 of 6 Page 5 of 6 Page 6 of 6

Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : TX4SD01A

Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : TX4SD01A

Page 1 of 3 Page 2 of 3 Page 3 of 3

Page 1 of 3 Page 2 of 3 Page 3 of 3

Page 1 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : W156R-D003 AGR No. : A155A-149 Applicant : Remote Solution Co., Ltd. Address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Manufacturer : Remote Solution Co., Ltd. Address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Type of Equipment : Smart Home Sensor FCC ID. : TX4ES60A Model Name : SD01A Multiple Model Name : SA01A, SB01A, SC01A Serial number : N/A Total page of Report : 6 pages (including this page) Date of Incoming : June 01, 2015 Date of issue : June 03, 2015 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Reviewed by: Approved by: Ki-Hong, Nam / Asst, Chief Engineer Sung-Ik, Han/ Managing Director ONETECH Corp. ONETECH Corp. Page 2 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. RADIO FREQUENCY EXPOSURE ................................................................................................................................ 6 4.1 RF EXPOSURE CALCULATION ....................................................................................................................................... 6 4.2 CALCULATED MPE SAFE DISTANCE............................................................................................................................. 6 Page 3 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) Revision History Issued Report No. Issued Date Revisions Effect Section W156R-D003 June 03, 2015 Initial Issue All Page 4 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) 1. VERIFICATION OF COMPLIANCE Applicant : Remote Solution Co., Ltd. Address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Contact Person : Byung-Cheol, Kim / Manager Telephone No. : +82-54-420-4517 FCC ID : TX4ES60A Model Name : SD01A Serial Number : N/A Date : June 03, 2015 EQUIPMENT CLASS DTS – DIGITAL TRNSMISSION SYSTEM E.U.T. DESCRIPTION Smart Home Sensor THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES ANSI C63.10: 2009 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification EQUIPMENT WILL BE OPERATED UNDER FCC RULES PART(S) FCC PART 15 SUBPART C Section 15.247 MODIFICATIONS ON THE EQUIPMENT TO ACHIEVE COMPLIANCE None FINAL TEST WAS CONDUCTED ON 3 m, Semi Anechoic Chamber -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. Page 5 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) 2. GENERAL INFORMATION 2.1 Product Description The Remote Solution Co., Ltd., Model SD01A (referred to as the EUT in this report) is a Smart Home Sensor. Product specification information described herein was obtained from product data sheet or user’s manual. DEVICE TYPE Portable Device FREQUENCY RANGE 2 405 MHz ~ 2 475 MHz Channel Number 15 MAX. RF OUTPUT POWER: 19.19 dBm NUMBER OF LAYER 4 Layers ANTENNA TYPE F-Antenna ANTENNA GAIN 0…

Text truncated - open the document above for the full version.

Page 1 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : W156R-D003 AGR No. : A155A-149 Applicant : Remote Solution Co., Ltd. Address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Manufacturer : Remote Solution Co., Ltd. Address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Type of Equipment : Smart Home Sensor FCC ID. : TX4ES60A Model Name : SD01A Multiple Model Name : SA01A, SB01A, SC01A Serial number : N/A Total page of Report : 6 pages (including this page) Date of Incoming : June 01, 2015 Date of issue : June 03, 2015 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Reviewed by: Approved by: Ki-Hong, Nam / Asst, Chief Engineer Sung-Ik, Han/ Managing Director ONETECH Corp. ONETECH Corp. Page 2 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. RADIO FREQUENCY EXPOSURE ................................................................................................................................ 6 4.1 RF EXPOSURE CALCULATION ....................................................................................................................................... 6 4.2 CALCULATED MPE SAFE DISTANCE............................................................................................................................. 6 Page 3 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) Revision History Issued Report No. Issued Date Revisions Effect Section W156R-D003 June 03, 2015 Initial Issue All Page 4 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) 1. VERIFICATION OF COMPLIANCE Applicant : Remote Solution Co., Ltd. Address : 92, Chogokri, Nammyun, Kimchon city, Kyungbuk, Korea, 740-871 Contact Person : Byung-Cheol, Kim / Manager Telephone No. : +82-54-420-4517 FCC ID : TX4ES60A Model Name : SD01A Serial Number : N/A Date : June 03, 2015 EQUIPMENT CLASS DTS – DIGITAL TRNSMISSION SYSTEM E.U.T. DESCRIPTION Smart Home Sensor THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES ANSI C63.10: 2009 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification EQUIPMENT WILL BE OPERATED UNDER FCC RULES PART(S) FCC PART 15 SUBPART C Section 15.247 MODIFICATIONS ON THE EQUIPMENT TO ACHIEVE COMPLIANCE None FINAL TEST WAS CONDUCTED ON 3 m, Semi Anechoic Chamber -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. Page 5 of 6 Report No. : W156R-D003 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev…

Text truncated - open the document above for the full version.