TYM-K155V3IP Phone

297.0 Speaker NFC Handset Cradle (optional) USB Type-C Port (side) Micro HDMI port (side) 3.5mm Audio Jack (side) Camera Camera Activity Indicator Avaya Vantage™ K155 Quick Start Guide Release 3.0, September 2020 © 2020, Avaya Inc. All Rights Reserved. Box contents: • Avaya Vantage™ K155 • Wall mount instructions You can order the following additional accessories separately: Wired handset with cradle kit, Wireless Bluetooth handset with cradle kit, Wall mount kit for the handset cradle, USB-C power adapter (Available only for North America, EU, and UK). Handset --- (optional) Setup Use the power adapter if your network does not support Power over Ethernet (PoE). Do not use the power adapter if PoE is used. Connecting the device: 1. Connect the handset: Ensure that the device is turned off. Connecting or removing the handset cradle while the device is turned on might trigger a reboot. On the left side panel of the device, remove the rubber cover from the handset cradle connector. Next, plug the flat handset cradle cable to the handset cradle connector on the Avaya Vantage™ device. Avoid using force and be careful not to bend any of the pins. Fix the cradle to the device while ensuring that the connection cable is not squeezed between the cradle and the device. 2. If you are using a wired handset, plug one end of the RJ9 handset cord to the handset and the other end to the RJ9 port at the handset cradle base. 3. Plug one end of the Ethernet cable into the primary Ethernet port on the rear panel of the device and the other end into your network jack. 4. If you are using an external power adapter, plug it into the back of the device and into a wall socket. 5. Place the device comfortably on your desk by adjusting the stand. If you want to mount the device to the wall, use the wall mount instructions leaflet located in the box. Detailed instructions can be found in the Avaya Vantage™ user guide available at: support.avaya.com. Startup After you plug in the device to a power source, it starts up and presents you the Avaya Setup Wizard. If automatic configuration through Device Enrollment Services (DES) starts for your device or your administrator has provided the file server address through DHCP, the device skips the Setup Wizard. If prompted, provide the DES enrollment code for auto provisioning. • Continued on the other side. Rear Panel Left Panel Message Waiting Indicator Startup continues. FRONTS/DE BACK SIDE Wistron Corporation Half-folded figure 1. MATERIAL: WOODFREE PAPER 80LB 2. PRINT COLOR: BLACK 3. FINISH: 4 PROCESS PRINTING 4. TOLERANCE OF DIMENSION: +0.5mm/-0.5mm 5. ALL COMPONENT OR PARTS MUST COMPLY WITH WISTRON STANDARD (WISTRON DOC NO.717-R025) EK0Z01 EK0Z00 DR AW N Jenny Yang REVIEWED: APPROVED Jonathan Wang 2018/04/09 2018/04/09 _,_ 297.0 Using the setup wizard: 1. Optional: To enable accessibility features, such as Magnification and TalkBack, tap Vision Settings. 2. Choose your desired language and tap NEXT. 3. If you are using Ethernet, tap NEXT at the bottom right corner. Otherwise select Wi-Fi mode, and enter the network information. 4. If you have the file server address from your IT administrator, choose Manual configuration and complete the setup by providing the file server and group details. 5. If your setup supports auto discovery of the file server based on your corporate email ID, choose Email based configuration and enter your corporate email ID. 6. If your domain has more than one file server setup, choose the one suitable for you and tap NEXT. The device initializes and displays the device Home screen. Software updates It is highly recommended that you upgrade your Avaya Vantage™ device to the latest software published by Avaya. Avaya Vantage™ automatically downloads and applies the latest software updates from the file server periodically. To check for a newer version of software and to download and apply the updates immediately, do the following: 1. Navigate to Apps > Settings > System > About Avaya Vantage > Software information. 2. Tap Update Now. Bluetooth Handset Users Pairing the Bluetooth handset: 1. Ensure that the Bluetooth handset is turned off. 2. Take the handset off the cradle and long press the power button for at least 15 seconds to enter the pairing mode. The LED indicator flashes 2 times every 1 second to confirm that you have entered pairing mode. Using Avaya Vantage™ Avaya Vantage™ comes with built-in Unified Communications (UC) experience. You do not need to separately set up a telephony application, such as Avaya Workplace Client or Avaya Vantage™ Connect, to access telephony features. To log on to the Avaya Vantage™ built-in UC experience for accessing the phone features, tap Sign In () on the Home screen. When prompted, enter your user name/extension and password. On your first login, read and accept EULA terms. You are now ready to use your Avaya Vantage™ device The menu icons for the telephony features are presented on the device home page for your easy access: 3. On the Avaya Vantage™ device home page, go to Apps > Settings> Connected Devices > Bluetooth and turn Bluetooth on. 4. From the list of available devices, choose the one that matches the label on the bottom of the Bluetooth handset. The entry appears as Avaya-J100- XXXXXX, with the last 6 digits unique to the handset. For further details, open the Help from Settings or the application menu. You can also obtain the Using Avaya Vantage™ manual from the Avaya Support site. You can find further documentation on the Avaya Vantage Device landing page on the Support site: https://support.avaya.com/products/P1644/avaya-vantage Additionally, you can find many videos on the Avaya YouTube channel: https://www.youtube.com/user/Avaya After pairing is successful, the handset will appear in the currently connected devices list. The handset LED indicator flashes 2 times every 5 seconds to show that it is connected to the base. Wireless Handset Layout )NT 210.0 210.0 Vantage K175/K165 MODEL NO…

Text truncated - open the document above for the full version.

AVAYA 250 Sidney Street, Belleville, Ontario, K8P 3Z3, Canada Tel: 613-967-5545 Fax: 613-967-5417 Date: 2020-11-03 FCC ID: TYM-K155V3 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Name: Ian Hawes E-mail: [email protected]

AVAYA 250 Sidney Street, Belleville, Ontario, K8P 3Z3, Canada Tel: 613-967-5545 Fax: 613-967-5417 Date: 2020-11-03 FCC ID: TYM-K155V3 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Name: Ian Hawes E-mail: [email protected]

AVAYA 250 Sidney Street, Belleville, Ontario, K8P 3Z3, Canada Tel: 613-967-5545 Fax: 613-967-5417 Date: 2020-11-03 FCC ID: TYM-K175 TYM-K155V3 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: AVAYA hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on AVAYA’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Name: Ian Hawes E-mail: [email protected]

Reference No.:200616C25-1 Page 1/6 CONSTRUCTION PHOTOS OF EUT Reference No.:200616C25-1 Page 2/6 Reference No.:200616C25-1 Page 3/6 Reference No.:200616C25-1 Page 4/6 Reference No.:200616C25-1 Page 5/6 Reference No.:200616C25-1 Page 6/6

1. MATERIAL: MATTED WHITE POLYESTER, T=0.1MM ,COATED MATTED PET EKZ0D0 EKZ000 Jonathan Wang 2020/11/03 2020/11/03 Jenny Yang V3 640.01P03.00C1 LBL 72X14MM REGULATORY K155 FCC ID: TYM-K155V3 IC: 3794A-K155 RCPAVK118-1486 Contains Transmitter Module FCC ID: 2AC23-WCT0Y IC: 12290A-WCT0Y

  5HIHUHQFH1R&3DJH &216758&7,213+27262)(87    5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH     5HIHUHQFH1R&3DJH   

Report No.: SA200616C25 Page No. 1 / 7 Report Format Version: 6.1.1 FCC Exclusion Report Report No.: SA200616C25 FCC ID: TYM-K155V3 Contains module FCC ID: 2AC23-WCT0Y Test Model: K155 Received Date: Jun. 23, 2020 Test Date: Jul. 13 ~ Jul. 15, 2020 Issued Date: Jul. 22, 2020 Applicant: AVAYA Address: 250 Sidney Street, Bellevilla, Ontario, K8P 3Z3, Canada Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA200616C25 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA200616C25 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200616C25 Original release Jul. 22, 2020 Report No.: SA200616C25 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: IP Phone Brand: Avaya Test Model: K155 Sample Status: Engineering sample Applicant: AVAYA Test Date: Jul. 13 ~ Jul. 15, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Jul. 22, 2020 Polly Chien / Specialist Approved by : , Date:Jul. 22, 2020 Bruce Chen / Senior Project Engineer Report No.: SA200616C25 Page No. 5 / 7 Report Format Version: 6.1.1 2 Evaluation Result 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200616C25 Page No. 6 / 7 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Maximum measured transmitter power: For module (Model: WCT0YR2201, FCC ID: 2AC23-WCT0Y) Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412~2462 23.76 -1.13 20 0.036 1 WLAN 5180~5240 16.44 1.60 20 0.013 1 WLAN 5260~5320 16.14 1.60 20 0.012 1 WLAN 5500~5720 16.09 1.60 20 0.012 1 WLAN 5745~5825 16.38 1.60 20 0.012 1 BT EDR 2402~2480 7.216 -1.13 20 0.001 1 BT LE 2402~2480 6.269 -1.13 20 0.001 1 Note: 1. The antennas information are listed as below. Antenna Ant. Type Frequency Range (GHz) Gain (dBi) Vantsge 3_Entry (K155) Main antenna PIFA 2.40-2.50GHz -1.32 5.15-5.85GHz 1.60 Vantsge 3_Entry (K155+K175) AUX antenna PIFA 2.40-2.50GHz -1.13 5.15-5.85GHz -1.95 *The above Antenna information is declared by manufacturer and for mor…

Text truncated - open the document above for the full version.

Report No.: RF200616C25A Page No. 1 / 57 Report Format Version: 6.1.1 Reference No.: 200929C02 FCC Test Report (Co-Located) Report No.: RF200616C25A FCC ID: TYM-K155V3 Contains module FCC ID: 2AC23-WCT0Y Test Model: K155 Received Date: Sep. 20, 2020 Test Date: Oct. 07 ~ Oct. 12, 2020 Issued Date: Oct. 16, 2020 Applicant: AVAYA Address: 250 Sidney Street, Bellevilla, Ontario, K8P 3Z3, Canada Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration/ Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF200616C25A Page No. 2 / 57 Report Format Version: 6.1.1 Reference No.: 200929C02 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................ 11 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards ........................................................................................ 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 18 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Conditions ................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 5 Pictures of Test Arrangements .......................................................................................................... 56 Appendix – Information of the Testing Laboratories ................................................................................. 57 Report No.: RF200616C25A Page No. 3 / 57 Report Format Version: 6.1.1 Reference No.: 200929C02 Release Control Record Issue No. Description Date Issued RF200616C25A Original release Oct. 16, 2020 Report No.: RF200616C25A Page No. 4 / 57 Report Format Version: 6.1.1 Reference No.: 200929C02 1 Certificate of Conformity Product: IP Phone Brand: Avaya Test Model: K155 Sample Status: E…

Text truncated - open the document above for the full version.

Report No.: RF200616C25 Page No. 1 / 63 Report Format Version: 6.1.1 FCC Test Report Report No.: RF200616C25 FCC ID: TYM-K155V3 Test Model: K155 Received Date: Jun. 23, 2020 Test Date: Jul. 13 ~ Jul. 15, 2020 Issued Date: Jul. 22, 2020 Applicant: AVAYA Address: 250 Sidney Street, Bellevilla, Ontario, K8P 3Z3, Canada Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF200616C25 Page No. 2 / 63 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 8 4 Test Types and Results ........................................................................................................................ 9 4.1 Radiated Emission Measurement ....................................................................................................... 9 4.1.1 Limits of Radiated Emission Measurement ......................................................................................... 9 4.1.2 Test Instruments ................................................................................................................................ 10 4.1.3 Test Procedures .................................................................................................................................. 11 4.1.4 Deviation from Test Standard ............................................................................................................. 11 4.1.5 Test Set Up ........................................................................................................................................ 12 4.1.6 EUT Operating Conditions ................................................................................................................. 12 4.1.7 Test Results ....................................................................................................................................... 13 4.2 Conducted Emission Measurement .................................................................................................. 45 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 45 4.2.2 Test Instruments ................................................................................................................................ 45 4.2.3 Test Procedures ................................................................................................................................. 46 4.2.4 Deviation from Test Standard ............................................................................................................ 46 4.2.5 Test Setup .....................................................................................................................................…

Text truncated - open the document above for the full version.

Reference No.: 200616C25 Page No. 1 / 3 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Reference No.: 200616C25 Page No. 2 / 3 Radiated Emission Test (9kHz ~ 30MHz) Reference No.: 200616C25 Page No. 3 / 3 Radiated Emission Test (30MHz ~ 1GHz)