U4J-MDV850TSet Top Box

MDV850T User’s Manual The lightning symbol with an arrow inside the equilateral triangle indicates that the user should pay attention to “dangerous voltage" un-insulated in the frame, which is sufficient to be harmful to humans. The exclamation mark inside the equilateral triangle indicates that there is important operat ion and service (maintenance) instructions in the attached printed documents. CAUTION RISK OF ELECTRIC SHOCK REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. CAUTION: Symbols and supplementary warni ng on the terminal button. Note: No extension cord, socket, or other lead wire should be used with the plug, to avoid electrical shock. The plug should be fully plugged in, with no part exposed. Never place the device where fluids may drop or splash. Never place any object with fluids, such as vases, on the device. Alert To prevent fire or shock hazard, do not expose this device to rain or moisture. In line with IS15245: 2002- BIS Rules Repair Please contact your cable TV operato r to have it repaired or replaced, if necessary. The installation shall be performed by qualified service personnel in line with local rules and laws. Important Safety Measures 1 Reading Instructions Read through all safety and operation instruction prior to operating the device. 2 Keeping Instructions Keep all safety and operation instructions for future reference. 3 Note & Warning Description All warning descriptions on the device and in the operation instructions should be followed. 4 Operate according to Instructions All operation instructions should be followed. 5 Cleaning Unplug the device from its power supply prior to cleaning. Never use fluid detergent or aerosol. Instead, simply clean with a wet cloth. 6 Accessories Any accessory not recommended should not be used, and may result in danger. 7 Water and Moisture Do not use this device near a bathtub, basin, sink, washtub, swimming pool or other place near a water supply, nor in a damp basement; any of which may cause a “grounding” effect. 8 Supporting Equipment Don’t place the device on an unstable cart, block, tripod, bracket, or table. It may fall, resulting in serious personal injuries or damage to the device. 9 Ventilation Openings and drilled holes in the cabinet are for ventilation to ensure its reliable operation and to prevent overheating. Do not place the device on a bed, sofa, carpet, or similar surface; otherwise, the openings may be blocked. Do not place the device near or on a radiator or hot air vent, nor inside a bookcase or shelf, unless proper ventilation is provided. Never stack other electronic equipment on the device. 10 Power Supply (110V) Only the power designated on the tab can be used (110V). If you are not sure what voltage your outlets support, please consult your local power supply company. 11 Protection of Power Cord The power cord should not be walked upon nor overlaid by other cords or connectors. 12 Lightning Strike To properly protect the device in a lightning strike, or when unattended or not in use for a long time, please unplug from the power supply or disconnect the antenna or cable network. By doing so, the damage to the video product from lightning strikes or the over-loading of the power supply (surge) can be prevented. 13 Overloading Never overload the power supply circuit with other appliances, for it might lead to fire or electrical shock. 14 Inflow of Articles or Fluids Never insert anything into the device, because foreign articles may contact dangerous high-voltage points or lead to a short circuit, causing fire or electrical shock. Never drop any fluid on the device. 15 Repair Do not try to repair device yourself, for you may be exposed to dangerous voltage or other risks after removing or opening the cover. Have it repaired by experienced professional repair personnel. 16 Damage to Be Repaired Unplug the device from the wall socket and have it repaired by qualified repair personnel if any of the following should occur: a The power cord or plug is damaged. b The device is exposed to rain or flooded with water. c Fluids or foreign objects fall into it. d The device does not operate properly after following the directions for use described in this manual. If this occurs, adjust only the controls introduced in the instructions, because any improper adjustment of other cont rols may result in damage, and, in most cases, may require work by a qualified technician to have it work properly again. e The device falls or the cabinet is damaged. f Its performance undergoes obvious changes, which indicate a repair is required. 17 Replacing Parts When it is necessary to replace a part, be sure to have it replaced by service technicians with the part stipulated by the manufacturer or one having the same features as the original. Using unauthorized replacement parts may result in fire, electrical shock, or other dangers. 18 Safety Inspection Whenever the device has been serviced or repaired, have it inspected for safety by a service technician (insulation standard testing) to ensure its proper operation. FCC Compliance This device is intended to be attached to a receiver that is not used to receive over-the-air broadcast signals. Connection of this device in any other fashion may cause harmful interference to radio communications and is in violation of the FCC Rules, Part 15. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may n ot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifica tions not expressly approved by the grantee of this device could void the user’s authority to o perate the equipment. NOTE: This equipment has been tested and found to comply with th e limits for a Class B digital device, pursuant to Par…

Text truncated - open the document above for the full version.

(Photo 1) FCC ID: U4J-MDV850T (Photo 2) FCC ID: U4J-MDV850T (Photo 3) FCC ID: U4J-MDV850T (Photo 17) FCC ID: U4J-MDV850T (Photo 18) FCC ID: U4J-MDV850T

110 mm (L) 65 mm (W) NOTICE THEFT OF SERVICE IS A CRIME. INSTALLING THIS DEVICE WITHOUT PERMISSION OR UNAUTHORIZED TAMPERING, MODIFYING OR ALTERING IT IN ANY WAY MAY SUBJECT YOU TO CIVIL OR CRIMINAL PENALTIES. CHECK WITH YOUR LOCAL CABLE COMPANY. DIGITAL SET-TOP BOXF/P No. : 532970-002-00MODEL: MDV850TFCC ID: U4J-MDV850T 110 V~ 60HZ 8.3W MAX RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION Made in China (Last updated on 6/8/2007) 521773-004-00 LBL,MOD,MDV850T,LEAD-FREE / ROHS COMP LIANT AUDIO/VIDEO APPARATUS E311778 3KHX THEFT OF SERVICE IS A CRIME. INSTALLING THIS DEVICE WITHOUT PERMISSION OR UNAUTHORIZED TAMPERING, MODIFYING OR ALTERING IT IN ANY WAY MAY SUBJECT YOU TO CIVIL OR CRIMINAL PENALTIES. CHECK WITH YOUR LOCAL CABLE COMPANY. WARNING: TO PREVENT ELECTRIC HOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful i nterference, and (2) this device must accept any interference received, including interfe rence that may cause undesired operation.

FCC ID.: U4J-MDV850T

(Photo 4) FCC ID: U4J-MDV850T (Photo 5) FCC ID: U4J-MDV850T (Photo 6) FCC ID: U4J-MDV850T (Photo 7) FCC ID: U4J-MDV850T (Photo 8) FCC ID: U4J-MDV850T (Photo 9) FCC ID: U4J-MDV850T (Photo 10) FCC ID: U4J-MDV850T (Photo 11) FCC ID: U4J-MDV850T (Photo 12) FCC ID: U4J-MDV850T (Photo 13) FCC ID: U4J-MDV850T (Photo 14) FCC ID: U4J-MDV850T (Photo 15) FCC ID: U4J-MDV850T (Photo 16) FCC ID: U4J-MDV850T

FCC ID: U4J-MDV850T Report No.: RF960212L04 Operational Description The EUT is a set-top box that enables a television set to receive and decode digital television broadcasts, which is a DVB-C and MPEG-2 compliant device. The EUT is equipped with the following interfaces: ◆ RF in (DVB-C System) ◆ By pass RF signal ◆ AV out x 2 ◆ S-Video out x 1 ◆ RS 232 For a more detailed features description, please refer to the manufacturer’s specifications or the User’s manual.

Report No.: FC960212L04 1 Report Format Version 2.0.6 FCC TEST REPORT REPORT NO.: FC960212L04 MODEL NO.: MDV850T RECEIVED: Feb. 12, 2007 TESTED: Feb. 26, ~ Sep. 6, 2007 ISSUED: Sep. 7, 2007 APPLICANT: Motorola Connected Home Solutions ADDRESS: 1, Lane 232, Pao Chiao Road, Shin Dian, Taipei, Taiwan 231, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. This test report consists of 95 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: FC960212L04 2 Report Format Version 2.0.6 Table of Contents 1 CERTIFICATION.............................................................................................4 2 SUMMARY OF TEST RESULTS.....................................................................5 2.1 MEASUREMENT UNCERTAINTY..................................................................6 3 GENERAL INFORMATION.............................................................................7 3.1 GENERAL DESCRIPTION OF EUT................................................................7 3.2 DESCRIPTION OF TEST MODES..................................................................8 3.3 DESCRIPTION OF SUPPORT UNITS..........................................................10 4 EMISSION TEST...........................................................................................12 4.1 CONDUCTED EMISSION MEASUREMENT................................................12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..............................12 4.1.2 TEST INSTRUMENTS..................................................................................13 4.1.3 TEST PROCEDURE.....................................................................................14 4.1.4 DEVIATION FROM TEST STANDARD.........................................................14 4.1.5 TEST SETUP................................................................................................15 4.1.6 EUT OPERATING CONDITIONS..................................................................16 4.1.7 TEST RESULTS (1)......................................................................................17 4.1.8 TEST RESULTS (2)......................................................................................21 4.1.9 TEST RESULTS (3)......................................................................................25 4.2 RADIATED EMISSION MEASUREMENT.....................................................29 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................29 4.2.2 TEST INSTRUMENTS..................................................................................30 4.2.3 TEST PROCEDURE.....................................................................................31 4.2.4 DEVIATION FROM TEST STANDARD.........................................................31 4.2.5 TEST SETUP................................................................................................32 4.2.6 EUT OPERATING CONDITIONS..................................................................32 4.2.7 TEST RESULTS (1)......................................................................................33 4.2.8 TEST RESULTS (2)......................................................................................35 4.2.9 TEST RESULTS (3)......................................................................................37 4.2.10 TEST RESULTS (4)......................................................................................39 4.2.11 TEST RESULTS (5)......................................................................................41 4.2.12 TEST RESULTS (6)......................................................................................43 4.2.13 TEST RESULTS (7)......................................................................................45 4.2.14 TEST RESULTS (8)......................................................................................47 4.2.15 TEST RESULTS (9)......................................................................................49 4.2.16 TEST RESULTS (10)....................................................................................51 4.2.17 TEST RESULTS (11).....................................................................................53 4.2.18 TEST RESULTS (12)....................................................................................55 4.2.19 TEST RESULTS (13)....................................................................................57 4.2.20 TEST RESULTS (14)....................................................................................59 4.2.21 TEST RESULTS (15)....................................................................................61 4.2.22 TEST RESULTS (16)....................................................................................63 4.2.23 TEST RESULTS (17)....................................................................................65 4.2.24 TEST RESULTS (18)....................................................................................67 4.2.25 TEST RESULTS (19)....................................................................................69 Report No.: FC960212L04 3 Report Format Version 2.0.6 4.2.26 TEST RESULTS (20)....................................................................................71 4.2.27 TEST RESULTS (21)....................................................................................73 4.2.28 TEST RESULTS (22).....................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST