U4Y-SE1I2Industrial Access Point

LANCOM ™ Access Points Installation instructions for professional installers ... connecting your business LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E- mail [email protected] I Internet www.lancom.eu www.lancom.eu © 2007 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. LANCOM , LANCOM Systems , LCOS and LANvantage are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 110531/0407 The legal FCC- compliant operation of wireless access points requires that particular frequency bands and maximum antenna gains are used. To meet these legal regulations and ensure FCC- compliant operation, only the antennas mentioned in this documentation as tested during FCC approval may be used. This document applies to the following devices:  LANCOM XAP- 40- 2  Hirschmann BAT54- Rail A system requirement for the legal and FCC- compliant operation of WLAN access points is LCOS version 7.10 or higher. Approved antennas Use only the antennas listed here together with the associated gain factor. Other antennas and/or higher gains are not permitted for legal, FCC- compliant operation! max gain at 2400 - 2483.5 MHz 2400 - 2483.5 MHz 5150 - 5250 MHz 5725 - 5850 MHz 5725 - 5850 MHz suitable for omni- directional use suitable for fixed, point to point use only for indoor use suitable for omni- directional use suitable for fixed, point to point use AirLancer Extender 0-18a 1111 18 dBi AirLancer Extender 0- 30 1 14 dBi 111 AirLancer Extender 0- 360ag 6 dBi6 dBi7 dBi7 dBi7 dBi AirLancer Extender 0-70 8.5 dBi8.5 dBi 111 AirLancer Extender 0- 9a 1111 23 dBi AirLancer Extender 0- D60a 11 10 dBi10 dBi10 dBi AirLancer Extender 0- D80g 8.5 dBi8.5 dBi 111 AirLancer Extender I-180 4 dBi4 dBi 111 AirLancer Extender I- 60AG 6 dBi6 dBi10 dBi10 dBi10 dBi BAT- ANT- 8A 11 8 dBi8 dBi8 dBi BAT- ANT- 8G 1 14 dBi 111 BAT- ANT- N- 12A 111 14 dBi14 dBi BAT- ANT- N- 14G 1 14 dBi 111 BAT-ANT- N-23/9A 1111 23 dBi BAT-ANT- N-6ABG6 dBi6 dBi8 dBi8 dBi8 dBi BAT- ANT- TNC- 10ADS 111 10 dBi10 dBi BAT- ANT- TNC- 8b/g DS 8.5 dBi8.5 dBi 111 BAT- ANT- TNC- B- D- 085- 01 8.5 dBi8.5 dBi 111 BAT- ANT- TNC- B- D- 085- 02 8.5 dBi8.5 dBi 111 1 Antenna is not suitable for this frequency band and must not be used LANCOM ™ Access Points Installation instructions for professional installers 2/2 ... connecting your business NOTICE: This device complies with Part 15 of the FCC Rules and with RSS- 210 of Industry Canada. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.  Changes or modifications made to this equipment not expressly approved by LANCOM may void the FCC authorization to operate this equipment. FCC Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. Setting WLAN parameters The WLAN parameters must be set to the values mentioned above to ensure legal and FCC- compliant operation.  For devices with multiple WLAN modules, ensure that you enter the antenna gain for each physical WLAN interface. To set the WLAN parameters, open Wireless LAN  General  Physical WLAN Settings in LANconfig. On the 'Radio' tab, you can select frequency band, channel number and other WLAN parameters. Under WEBconfig or Telnet select (Expert Configuration >) Setup > Interfaces > WLAN > Radio- Settings.

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 02.04.2007 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Company requests confidentiality for the following products: FCC ID Number Product Title/Model U4Y-SE1I2 LANCOM XAP-40-2, Hirschmann BAT54-Rail For the product stated above, we request that the following information be held confidential: 1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: "schematics”. 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “blockdiagram”. 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: “operational description” The above exhibits contain Company trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: André Krautschick Company: LANCOM Systems GmbH Address: Adenauerstr. 20/B2 52146 Wuerselen / Germany Phone: +49 02405 49936 443 Email: [email protected]

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 74 of 88 Test sample: XAP-40-2, front site SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 75 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 78 of 88 Back site

Version: 1.1 Create Date: 02/05/2005 Author: R.Hecht File: MT_Labelspec_BAT54-Rail_V11.doc Change Date:02/04/2007 R.Hecht Vertraulich/Confidential Copyright  2007 by LANCOM Systems GmbH Page: 14/21 3.7.2 FCC label (IDs) Picture only for illustration! Specification of the label material: label format: 50 x 13 mm (± 5 mm), alternatively 55 x13 mm (± 5 mm) material: self-adhesive, polyester or polypropylene, white, UL listed, abrasion-proof Specification of the printing on the label: 1 FCC ID See table below font: Arial, 7 point, centered 2 IC See table below font: Arial, 7 point, centered 3 FCC logo Table of FCC ID and IC: MT number MT description FCC ID IC 87159 Hirschmann BAT54-Rail U4Y-SE1I2 cccccc-SE1I2 (cccccc not yet specified) 3 FCC logo 2 IC 1 FCC ID Version: 1.1 Create Date: 02/05/2005 Author: R.Hecht File: MT_Labelspec_BAT54-Rail_V11.doc Change Date:02/04/2007 R.Hecht Vertraulich/Confidential Copyright  2007 by LANCOM Systems GmbH Page: 15/21 4 Position of the labels on the housings 4.1 Position of labels Picture only for illustration! rear front front rear LAN MAC Modification label WLAN MAC-2 Type Plate Tech. Data WLAN MAC-1 Hirschmann type Plate FCC Label (text) FCC Label (IDs)

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 80 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 81 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 82 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 83 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 84 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 85 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 86 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 87 of 88 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02/07 Date: 2007-04-20 Page 88 of 88

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant2_5G Date: 2007-05-11 Page 24 of 30 3.7 MPE These equations are generally accurate in the far field of an antenna but will over predict power density in the near field, where they could be used for making a “worst case” prediction. S = PG/4πR 2 where S = power density ( in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units e.g. mW) G = power gain of the antenna in the direction of interest relative to the isotropic radiator R = distance to the center of radiation of the antenna (appropriate units e.g. cm) Or S = EIRP/4πR 2 where EIRP = equivalent isotropically radiated power Calculation: 5.2 GHz band 5.8 GHz band (Calculated for max. EIRP) EIRP: 15.8 dBm = 38 mW calculated at distance of 20 cm: power density = 38 /4π20 2 = 0.008 mW/ cm 2 (Calculated for max. EIRP) EIRP: 27.40 dBm = 550 mW calculated at distance of 20 cm: power density = 550 /4π20 2 = 0.109 mW/ cm 2 Measurement: 5.2 GHz band measured at a distance of 20 cm: power density = 0.003 mW/ cm 2 Limit: 1mW/ cm 2 is the reference level for general public exposure according to the OET Bulletin 65, Edition 97-01 Table 1.

P:\07\4556_1\Task2(SRD)\2-4556-01-02_07_Ant2_5G.doc Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: IC 3463A-1 TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report no.: 2-4556-01-02_07_Ant2_5G LANCOM XAP-40-2 Hirschmann BAT54-Rail FCC ID: U4Y-SE1I2 IC: 7049A-SE1I2 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant2_5G Date: 2007-05-11 Page 2 of 30 Table of contents 1. ADMINISTRATIVE DATA ......................................................................................................................................3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items.....................................................................................................................................3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER........................................................................................ 4 1.3 DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) .......................................................................................... 5 1.3.1 EUT: Type, S/N etc. ......................................................................................................................................5 1.3.2 If RF component testing only, description of additional used HW/SW ......................................................... 5 1.3.3 ADDITIONAL EUT INFORMATION...................................................................................................................... 6 1.3.4 EUT operating modes ................................................................................................................................... 7 1.3.5 Extreme conditions testing values................................................................................................................. 7 2 TEST STANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES ............................................. 8 3 RF MEASUREMENT TESTING ............................................................................................................................. 9 3.1 DESCRIPTION OF TEST SET-UP................................................................................................................................ 9 3.1.1 Radiated measurements ................................................................................................................................ 9 3.1.2 Conducted measurements ............................................................................................................................. 9 3.1.3 AC-conducted measurements........................................................................................................................ 9 3.2 REFERENCED DOCUMENTS.................................................................................................................................. 10 3.3 ADDITIONAL COMMENTS..................................................................................................................................... 10 3.4 ANTENNA GAIN................................................................................................................................................... 10 3.5 MAXIMUM OUTPUT POWER (CONDUCTED) (OFDM) § 15.247(B)(3) / 15.407(A)(1) ........................................... 11 3.6 ANT 2: BAT-ANT-8A ........................................................................................................................................ 15 3.7 MPE .................................................................................................................................................................... 24 3.8 DATASHEET ANTENNA......................................................................................................................................... 25 3.9 TESTEQUIPMENT.................................................................................................................................................. 26 4 PHOTOGRAPHS ..................................................................................................................................................... 30 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant2_5G Date: 2007-05-11 Page 3 of 30 1. Administrative data 1.1. Administrative data of the test facility 1.1.1 Identification of the testing laboratory Company name: Cetecom ICT Services GmbH Address: Untertürkheimerstr. 6-10 D-66117 Saarbruecken Germany Laboratory accreditation: DAR-Registration No. DAT-P-176/94-D1 Bluetooth Qualification Test Facility (BQTF) Responsible for testing laboratory: Harro Ames, Stefan Bös Phone: +49 681 598 0 Fax: +49 681 598 9075 email: [email protected] ..................................................... / ......................................................... Responsible for testing laboratory (Harro Ames, Stefan Bös) 1.1.2 Organizational items Reference No.: Order No.: Responsible for test report and Harro Ames, Stefan Bös project leader: Receipt of EUT: 2007-03-22 Date(s) of test: 2007-03-25 to 2007-04-20 Date of report: 2007-05-11 Number of report pages: 30 Number of diagram pages (annex): --------…

Text truncated - open the document above for the full version.

P:\07\4556_1\Task2(SRD)\2-4556-01-02_07_Ant9_5G.doc Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: IC 3463A-1 TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report no.: 2-4556-01-02_07_Ant9_5G LANCOM XAP-40-2 Hirschmann BAT54-Rail FCC ID: U4Y-SE1I2 IC: 7049A-SE1I2 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant9_5G Date: 2007-05-11 Page 2 of 30 Table of contents 1. ADMINISTRATIVE DATA ......................................................................................................................................3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items.....................................................................................................................................3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER........................................................................................ 4 1.3 DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) .......................................................................................... 5 1.3.1 EUT: Type, S/N etc. ......................................................................................................................................5 1.3.2 If RF component testing only, description of additional used HW/SW ......................................................... 5 1.3.3 ADDITIONAL EUT INFORMATION...................................................................................................................... 6 1.3.4 EUT operating modes ................................................................................................................................... 7 1.3.5 Extreme conditions testing values................................................................................................................. 7 2 TEST STANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES ............................................. 8 3 RF MEASUREMENT TESTING ............................................................................................................................. 9 3.1 DESCRIPTION OF TEST SET-UP................................................................................................................................ 9 3.1.1 Radiated measurements ................................................................................................................................ 9 3.1.2 Conducted measurements ............................................................................................................................. 9 3.1.3 AC-conducted measurements........................................................................................................................ 9 3.2 REFERENCED DOCUMENTS.................................................................................................................................. 10 3.3 ADDITIONAL COMMENTS..................................................................................................................................... 10 3.4 ANTENNA GAIN................................................................................................................................................... 10 3.5 MAXIMUM OUTPUT POWER (CONDUCTED) (OFDM) § 15.247(B)(3) / 15.407(A)(1) ........................................... 11 3.6 ANT 9: EXTENDER I-60AG ................................................................................................................................. 15 3.7 MPE .................................................................................................................................................................... 24 3.8 DATASHEET ANTENNA......................................................................................................................................... 25 3.9 TESTEQUIPMENT.................................................................................................................................................. 26 4 PHOTOGRAPHS ..................................................................................................................................................... 30 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant9_5G Date: 2007-05-11 Page 3 of 30 1. Administrative data 1.1. Administrative data of the test facility 1.1.1 Identification of the testing laboratory Company name: Cetecom ICT Services GmbH Address: Untertürkheimerstr. 6-10 D-66117 Saarbruecken Germany Laboratory accreditation: DAR-Registration No. DAT-P-176/94-D1 Bluetooth Qualification Test Facility (BQTF) Responsible for testing laboratory: Harro Ames, Stefan Bös Phone: +49 681 598 0 Fax: +49 681 598 9075 email: [email protected] ..................................................... / ......................................................... Responsible for testing laboratory (Harro Ames, Stefan Bös) 1.1.2 Organizational items Reference No.: Order No.: Responsible for test report and Harro Ames, Stefan Bös project leader: Receipt of EUT: 2007-03-22 Date(s) of test: 2007-03-25 to 2007-04-20 Date of report: 2007-05-11 Number of report pages: 30 Number of diagram pages (annex): ----------…

Text truncated - open the document above for the full version.

P:\07\4556_1\Task2(SRD)\2-4556-01-02_07_Ant12_5G.doc Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: IC 3463A-1 TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report no.: 2-4556-01-02_07_Ant12_5G LANCOM XAP-40-2 Hirschmann BAT54-Rail FCC ID: U4Y-SE1I2 IC: 7049A-SE1I2 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant12_5G Date: 2007-05-11 Page 2 of 25 Table of contents 1. ADMINISTRATIVE DATA ......................................................................................................................................3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items.....................................................................................................................................3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER........................................................................................ 4 1.3 DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) .......................................................................................... 5 1.3.1 EUT: Type, S/N etc. ......................................................................................................................................5 1.3.2 If RF component testing only, description of additional used HW/SW ......................................................... 5 1.3.3 ADDITIONAL EUT INFORMATION...................................................................................................................... 6 1.3.4 EUT operating modes ................................................................................................................................... 7 1.3.5 Extreme conditions testing values................................................................................................................. 7 2 TEST STANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES ............................................. 8 3 RF MEASUREMENT TESTING ............................................................................................................................. 9 3.1 DESCRIPTION OF TEST SET-UP................................................................................................................................ 9 3.1.1 Radiated measurements ................................................................................................................................ 9 3.1.2 Conducted measurements ............................................................................................................................. 9 3.1.3 AC-conducted measurements........................................................................................................................ 9 3.2 REFERENCED DOCUMENTS.................................................................................................................................. 10 3.3 ADDITIONAL COMMENTS..................................................................................................................................... 10 3.4 ANTENNA GAIN................................................................................................................................................... 10 3.5 MAXIMUM OUTPUT POWER (CONDUCTED) (OFDM) § 15.247(B)(3) .................................................................. 11 3.6 ANT 12: EXTENDER 0-D60A............................................................................................................................... 13 3.7 MPE .................................................................................................................................................................... 18 3.8 DATASHEET ANTENNA......................................................................................................................................... 19 3.9 TESTEQUIPMENT.................................................................................................................................................. 21 4 PHOTOGRAPHS ..................................................................................................................................................... 25 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant12_5G Date: 2007-05-11 Page 3 of 25 1. Administrative data 1.1. Administrative data of the test facility 1.1.1 Identification of the testing laboratory Company name: Cetecom ICT Services GmbH Address: Untertürkheimerstr. 6-10 D-66117 Saarbruecken Germany Laboratory accreditation: DAR-Registration No. DAT-P-176/94-D1 Bluetooth Qualification Test Facility (BQTF) Responsible for testing laboratory: Harro Ames, Stefan Bös Phone: +49 681 598 0 Fax: +49 681 598 9075 email: [email protected] ..................................................... / ......................................................... Responsible for testing laboratory (Harro Ames, Stefan Bös) 1.1.2 Organizational items Reference No.: Order No.: Responsible for test report and Harro Ames, Stefan Bös project leader: Receipt of EUT: 2007-03-22 Date(s) of test: 2007-03-25 to 2007-04-20 Date of report: 2007-05-11 Number of report pages: 25 Number of diagram pages (annex): …

Text truncated - open the document above for the full version.

P:\07\4556_1\Task2(SRD)\2-4556-01-02_07_Ant14_5G.doc Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: IC 3463A-1 TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report no.: 2-4556-01-02_07_Ant14_5G LANCOM XAP-40-2 Hirschmann BAT54-Rail FCC ID: U4Y-SE1I2 IC: 7049A-SE1I2 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-4556-01-02_07_Ant14_5G Date: 2007-05-11 Page 2 of 31 Table of contents 1. ADMINISTRATIVE DATA ......................................................................................................................................3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items.....................................................................................................................................3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER............…

Text truncated - open the document above for the full version.