U5QLANYUR/C PLANE SERIES

SHANTOU LANYU MODEL INDUSTRIAL CO., LTD. ADD: Floor 3, Workshop of Zhong Cheng Marketplace, North Dong Xia Road, Shan Tou City, Guang Dong ,China DECLARATION OF IDENTICAL TO TYPE Hereby we: SHANTOU LANYU MODEL INDUSTRIAL CO., LTD. (Name of manufacturer) Basic application number: Basic product name: R/C PLANE SERIES Basic model number: TW-748 Basic brand Name: N/A Basic applicant : SHANTOU LANYU MODEL INDUSTRIAL CO., LTD. Declare the Circuit, PCB Layout, Electrical Parts and Figure are identical to the basic model, Except the outer: Change/ Additional product name: R/C PLANE SERIES Change/ Additional model number: TW-749, TW-747， ，， ，TW-745， ，， ，TW-750， ，， ，TW-751， ，， ，TW-742， ，， ， TW-757， ，， ，TW-758， ，， ，TW-759； ；； ； Change/Additional brand name: N/A Change/Additional Applicant : SHANTOU LANYU MODEL INDUSTRIAL CO., LTD. Change/Additional Manufacturer : SHANTOU LANYU MODEL INDUSTRIAL CO., LTD. Company Chop Signature DATE: 2010-8-17

External photos

Internal Photos

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 Email: [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 Report No.: GZEM100800164204 Page: 1 of 22 FCC ID: U5QLANYU The CE mark as shown below can be used, under the responsibility of the manufacturer, after completion of an EC Declaration of Conformity and compliance with all relevant EC Directives. Stephen Guo Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1008001642RF Applicant: SHANTOU LANYU MODEL INDUSTRIAL CO., LTD Equipment Under Test (EUT): EUT Name: R/C PLANE SERIES Item No.: TW-748, TW-749, TW-747, TW-745, TW-750, TW-751, TW-742, TW-757, TW-758, TW-759 § § Please refer to section 3 of this report for details FCC ID: U5QLANYU Standards: FCC PART 15 Subpart C: 2009 Date of Receipt: 2010-08-17 Date of Test: 2010-08-20 to 2010-09-02 Date of Issue: 2010-09-25 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM100800164204 Page: 2 of 22 FCC ID:MG38700 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2010-09-25 Original Authorized for issue by: 2010-08-20 to 2010-09-02 Tested By Daniel He / Project Engineer Date 2010-09-21 Prepared By Daniel He / Project Engineer Date 2010-09-25 Checked By Strong Yao / Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM100800164204 Page: 3 of 22 FCC ID:MG38700 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Test Requirement Stanadard Paragraph Result Field Strength of Fundamental FCC PART 15:2009…

Text truncated - open the document above for the full version.

Radiated Emission Test Setup Below 1G Above 1G: