UBF62071T27SUPER SLICKS SPEED BUGGY

27.145MHz transmitter operational description of Monster The transmitter send out 27.145MHz signal of high frequency to control the cat move, which supply voltage is 9.0V battery. Please consult with added block diagram and schematic. When the user pulls the trigger or pulls the whirlabout (schematic presents with SW2~SW5), the IC(w55RF27T3B) high voltage signal enters into GND .these signal is processed by IC and sent out through ANT-6 pin of IC .Y1,R2,C8,C11,L5 makes up of oscillator ,which generated base oscillatory signal .The signal of R, L, F and B come by L4,C5,L3,L1,C1 and fixed 49.860MHz of high frequency, is sent out. In the IC inner, the input signal need be enlarged and this function need voltage too. The voltage is supplied by the power through L2. A LED acts as a power ñon indicator .D2 is voltage regulator for IC. All tuning and verifications are performed by the manufacturer and there are no adjustment which can be made by the user .No external ground is required or used with this transmitter.

G428 27TX.sch-1 - Tue Jun 13 18:49:42 2006

TEST REPORT Report No. : AG015154-001 Date : 2006 July 14 Page 1 of 11 FCC ID: UBF62071T27 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Application No. : LG211872(0) Client : TRU (H.K.) Limited 15/F., World Finance Centre, North Tower, Harbour City, 19 Canton Road, Tsimshatsui, Kowloon, Hong Kong Sample Description : Two(2) submitted sample(s) stated to be Super Slicks Speed Buggy of Model No. 62071 Rating : 1 x 9V size battery No. of submitted sample : 2 piece(s) *** Date Received : 2006 June 14 Test Period : 2006 June 15 – 2006 June 22 Test Requested : FCC Part 15 Certification. Test Method : 47 CFR Part 15 (10-1-05 Edition) ANSI C63.4 – 2003 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart C. For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : ____________________________________________________ Danny Chui Deputy Manager - EL. Division TEST REPORT Report No. : AG015154-001 Date : 2006 July 14 Page 2 of 11 FCC ID: UBF62071T27 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Table of Contents 1 General Information............................................................................................................................. 3 1.1 General Description ..................................................................................................................... 3 1.2 Location of the test site ................................................................................................................ 4 1.3 List of measuring equipment........................................................................................................ 5 2 Description of the radiated emission test ............................................................................................. 6 2.1 Test Procedure ............................................................................................................................. 6 2.2 Test Result ................................................................................................................................... 6 2.3 Radiated Emission Measurement Data ........................................................................................ 7 3 Description of the Line-conducted Test............................................................................................... 8 3.1 Test Procedure ............................................................................................................................. 8 3.2 Test Result ................................................................................................................................... 8 3.3 Graph and Table of Conducted Emission Measurement Data ..................................................... 8 4 Photograph ........................................................................................................................................... 9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission....................... 9 4.2 Photographs of the External and Internal Configurations of the EUT......................................... 9 5 Supplementary document................................................................................................................... 10 5.1 Bandwidth .................................................................................................................................. 10 5.2 Duty cycle .................................................................................................................................. 10 5.3 Transmission time ...................................................................................................................... 10 6 Appendices......................................................................................................................................... 11 TEST REPORT Report No. : AG015154-001 Date : 2006 July 14 Page 3 of 11 FCC ID: UBF62071T27 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1 General Information 1.1 General Description The equipment under test (EUT) is a transmitter for Super Slicks Speed Buggy. It is operating at 27.145MHz which is controlled by a crystal. The EUT is powered by 1 x 9V size battery and it has two control trigger in the EUT. When the forward, backward, turn left and turn right trigger is pressed once, it will transmit a difference radio signal for receiver go different direction. The brief circuit description is listed as follows: - Y1 and associated circuit act as oscillator. - U1 and associated circuit act as encoder. - L3 and associated circuit act as RF transmission. TEST REPORT Report No. : AG015154-001 Date : 2006 July 14 Page 4 of 11 FCC ID: UBF62071T27 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1.2 Location of the test site Radiated emiss…

Text truncated - open the document above for the full version.