UCQBODYPADTX2.4G Gamepad Transmitter

KC-1604 INSTRUCTION MANUAL Thanks for your purchase the body pad. It is designed for the action game, you play the action game with the production. You will feel more comfortable more really. You will exercise as play the action game. The body pad use 2.4GHZ technology. You will feel free and easy. Quite try it out! Please save the instruction manual to safe place for usage in future. FEATURE 1. Support 4 player at the same time 2. The receiver and the remote must be matched same channel. 3. Remote have right arm, left arm, left right, right leg, LT, RT, L1, L2, R1, R2, D-PAD. 4. The LT, RT, Right leg, Left leg, Right arm, Left arm can be matched any function key of □, ○,╳,△. 5. Operation voltage 3.3V 6. Usage 3XAAA batteries. 7. Signal led 8. Operation frequency 2.44GHZ USAGE METHOD 1. Ensure your PS2 console shut off 2. Insert the receiver into the PS2 game port 3. Turn on your console 4. Connect the remote all part to relative place. 5. Turn on your remote power, the receiver indicate LED will change flash to ON. 6. According to the game require adjust the right arm, left arm, left right, right leg, LT, RT, key to relative function. 7. Then you will play game and exercise at the same time. Cool and easy! Key switch description 1. Receiver Start key: start or stop game in the game Select: refer to instruction manual of different game, Channel switch: match the same channel to the remote Function switch: according different game adjust the switch place. 2. Remote description z Left hand D-PAD: 8-way direction key, move leading actor direction in the game Power switch: ON/ OFF Power LT: according different game matched relative function with receiver LK switch z Right hand L1, L2, R1, R2 buttons, according to different game setting different function, please refer to game manual. RK: according different game matched relative function with receiver LK switch z Left arm According different game matched relative function with receiver LK switch z Right arm According different game matched relative function with receiver LK switch z Left leg According different game matched relative function with receiver LK switch z Right leg According different game matched relative function with receiver LK switch The battery installation z Remove the battery cover with the screw z Install 3xAAA batteries according the right polarity z Reinstall the battery cover. Notes z the non-rechargeable batteries are not to be recharged, please refer the batteries instruction z rechargeable batteries are to be removed from the body-pad before being recharge z different types of batteries or new and used batteries are not to be mixed z the supply terminals are not to be short-circuited z exhausted battered are to be removed from the body-pad Precaution of Usage & Storage ● Do not use or store this joystick in an area where is highly moist, dangerous hot, extra- cold or full of dust. ● Do not expose this joystick to direct sunlight for a long time. ● Do not lay this joystick on a surface that is slanted or unstable. ● Do not apply a strong force upon this joystick or drop it roughly from a high place. ● If you want to clean this joystick, you can use a soft cloth, sock it in clean water or diluted neutral detergent, wring out it thoroughly before wiping the dirt from the case. Never use chemicals such as benzene or paint thinner to clean this joystick Note: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. KC-7604 INSTRUCTION MANUAL Thanks for your purchase the body pad. It is designed for the action game, you play the action game with the production. You will feel more comfortable more really. You will exercise as play the action game. The body pad use 2.4GHZ technology. You will feel free and easy. Quite try it out! Please save the instruction manual to safe place for usage in future. FEATURE 1. Support 4 player at the same time 2. The receiver and the remote must be matched same channel. 3. Remote have right arm, left arm, left right, right leg, LT, RT,L, R, WHITE , BLACK, D-PAD. 4. The LT, RT, Right leg, Left leg, Right arm, Left arm can be matched any function key of A,B,X,Y. 5. Operation voltage 3.3V 6. Usage 3XAAA batteries. 7. Signal led 8. Operation frequency 2.44GHZ USAGE METHOD 1. Ensure your XBOX console shut off 2. Insert the receiver into the XBOX game port 3. Turn on your console 4. Connect the remote all part to relative place. 5. Turn on your remote power, the receiver indicate LED will change flash to ON. 6. According to the game require adjust the right arm, left arm, left right, right leg, LT, RT, key to relative function. 7. Then you will play game and exercise at the same time. Cool and easy! Key switch description 1. Receiver Start key: start or stop game in the game BACK: refer to instruction manual of different game, Channel switch: match the same channel to the remote Function switch: according different game adjust the switch place. 2. Remote description z Left hand D-PAD: 8-way direction key, move leading actor direction in the game Power switch: ON/ OFF Power LT: according different game matched relative function with receiver LK switch z Right hand L, R, WHITE, BLACK buttons, according to different game setting different function, please refer to game manual. RK: according different game matched relative function with receiver LK switch z Left arm According different game matched relative function with receiver LK switch z Right arm According different game matched relative function with receiver LK switch z Left leg According different game matched relative function with receiver LK switch z Right leg According different game matched relative function with receiver LK switch The battery installation z Remove the battery cover with the screw z Install 3xAAA batteries according the right polarity z Reinstall the battery cover. Notes z the non…

Text truncated - open the document above for the full version.

Transmitter Part Block Diagram RF Module and antenna Power manager MCU Channel switch Key controller

FCC ID Location FCC ID Label Sample FCC ID: UCQBODYPADTX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Transmitter Part Operational Description DESCRIPTION： 1. Power manager: input 4.5v voltage, it step-down to 3.0v, then supply to the mcu and the RF module. 2. channel switch: 4 channels ID, the mcu detect different channel, the RF will transmit match frequency. 3. key controller: it match different defined key, mcu detect key then transmit it to receiver. 4. mcu: it manag the module, key controller and channels switch. Make sure all action according define. 5. module and antenna: Transmit the mcu code by RF signal, The antenna is 50Ω RF Module and antenna Power manager MCU Channel switch Key controller

1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 5-Aug-2006 Sheet of File: D:\wsd-pcb\kc-1604.Ddb Drawn By: 10k 123456789 101112131415161718 U1 EM78P156 123 4 5 678 9 1011 12 J1 RF MODVLE 10k VDD 100nF 10K10k10k10K10K 10R Y1455KHz 100P100P 10UF VDD VDD L1 L2 RT LT R1 R2 LE LK RK RE U D L R 4 S? 4 S?DIODE BT+ BT- Vin 1 GND 2 Vout 3 U23.3V 1.5K LED 10UF 10UF 100nF VDD 1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 22-Jun-2006 Sheet of File: D:\wsd-pcb\kc-2401.ddb Drawn By: CE 1 DR2 2 CLK2 3 DOUT2 4 CS 5 DR1 6 CLK1 7 DATA 8 DVDD 9 VSS 10 XC2 11 XC1 12 VDD_PA 13 ANT1 14 ANT2 15 VSS_PA 16 VDD 17 VSS 18 IREF 19 VSS 20 VDD 21 VSS 22 PWR_UP 23 VDD 24 U1NRF2401 Y116M R221M C2122pFC22 22pF C2033nF C1310nF C121nF VDD R21 22K L1 3.6nH L2 22nH C15 2.2nF C16 22pF C181.0pF C171.0pF C191.5pF C144.7uF RF I/O 123456789101112 J1CON12 VDD

Report No.: SZEMO060701667RF-1 Page: 1 of 21 FCC ID: UCQ BODYPADTX Robinson Lo Laboratory Manager This report refers to the General Conditions for Inspection and Testing Services, printed overleaf. This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the SGS PRODUCT CERTIFICATION MARK. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. Member of the SGS Group (SGS SA) SGS-CSTC Standards Technical Services Ltd. No.198 Kezhu Road, Science Town Economic& Technology Development District Guangzhou, China 510663 Telephone: +86 (0) 20 8215 5555 Fax: +86 (0) 20 8207 5059 Email: [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 556682 FCC TEST REPORT Application No.: SZEMO060701667RF Applicant: Outrageous International H.K. Ltd. Fundamental Frequency : 2.416GHz; 2.432GHz; 2.448GHz and 2.464GHz. FCC ID: UCQBODYPADTX Equipment under Test (EUT): Name: Body Actuated Controller for Playstation Model: KC1604 Name: Body Actuated Controller for Xbox Model: KC7604 * This report is only for the transmitter of the 2.4G wireless system Standards: FCC PART 15, SUBPART C : 2006 (Subpart 15.249) Date of Receipt: 25 July 2006 Date of Test: 26 July to 04 August 2006 Date of Issue: 05 August 2006 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEMO060701667RF-1 Page: 2 of 21 FCC ID: UCQBODYPADTX 2 Test Summary Test Test Requirement Stanadard Paragraph Result Radiated Emission FCC PART 15 2006 15.249 (a) (d) PASS Band Edge FCC PART 15 2006 15.249 (d) PASS Bandwidth FCC PART 15 2006 15.249 PASS Remark: This report is only for the transmitter of the 2.4G wireless system Name: Body Actuated Controller for Playstation Model: KC1604 Name: Body Actuated Controller for Xbox Model: KC7604 KC1604 is the model of PS2 Game transmitter and receiver. KC7604 is the model of XBox Game transmitter and receiver. For the PS2 Game Controller (transmitter part)and XBox Game Controller (transmitter part). The two transmitters are electrically identical. They are only different in the color of the outer, control button name and software. So model KC1604: PS2 Game controller was mainly tested. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEMO060701667RF-1 Page: 3 of 21 FCC ID: UCQBODYPADTX 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 TEST SUMMARY................................................................................................................................................. 2 3 CONTENTS........................................................................................................................................................... 3 4 GENERAL INFORMATION................................................................................................................................4 4.1 CLIENT INFORMATION.................................................................................................................................... 4 4.2 DETAILS OF E.U.T......................................................................................................................................... 4 4.3 DESCRIPTION OF SUPPORT UNITS................................................................................................................ 4 4.4 TEST LOCATION............................................................................................................................................. 5 4.5 OTHER INFORMATION REQUESTED BY THE CUSTOMER............................................................................... 5 4.6 TEST FACILITY................................................................................................................................................ 5 5 TEST RESULTS................................................................................................................................................... 6 5.1 TEST INSTRUMENTS....................................................................................................................................... 6 5.2 E.U.T. OPERATION........................................................................................................................................ 6 5.3 TEST PROCEDURE & MEASUREMENT DATA.................................................................................................. 7 5.3.1 Radiated Emissions................................................................................................................................7 5.3.2 Band Edge.............................................................................................................................................11 5.3.3 Occupied Bandwidth............................................................................................................................13 6 PHOTOGRAPHS - TES…

Text truncated - open the document above for the full version.