UDX-60019010802.11 a/b/g/n Wireless Access Point

Cisco Systems, Inc.

Application Details

Equipment Class: NII - Unlicensed National Information Infrastructure TX
Date of Grant: Oct 25, 2011
Application Purpose: Original Equipment
Date of Application: Oct 25, 2011
Equipment Note: 802.11 a/b/g/n Wireless Access Point
Frequency Range: 5180.00000000 - 5240.00000000
Company: Cisco Systems, Inc.
Country: United States

Documents & Files

Select a file to view

Users Manual

Test Setup Photos

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

External Photos

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8

Internal Photos

Page 9 Page 10 Page 11 Page 12

Operational Description

FCC ID: UDX-60019010 Report No.: RF110815C07 Operational Description This device is an 802.11 a/b/g/n Wireless Access Point, which operates in both 2.4GHz and 5GHz bands; the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 48Vdc from POE. The antennas are PIFA and Dipole antennas with N-type antenna connectors. The other instruction, please have a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

RF Exposure Info

Report No.: SA110815C07-1 1 Report Format Version 4.0.0 Reference No.: 110916C03 RF EXPOSURE REPORT REPORT NO.: SA110815C07-1 MODEL NO.: MR66 FCC ID: UDX-60019010 RECEIVED: Aug. 15, 2011 TESTED: Aug. 22 ~ Sep. 8, 2011 ISSUED: Sep. 30, 2011 APPLICANT: Meraki Inc. ADDRESS: 660 Alabama St, 4th floor, San Francisco, CA 94110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) This test report consists of 7 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110815C07-1 2 Report Format Version 4.0.0 Reference No.: 110916C03 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION..............................................................................................4 2. RF EXPOSURE LIMIT.....................................................................................5 3. MPE CALCULATION FORMULA.....................................................................5 4. CLASSIFICATION............................................................................................5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER...................6 Report No.: SA110815C07-1 3 Report Format Version 4.0.0 Reference No.: 110916C03 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110815C07-1 Original release Sep. 30, 2011 Report No.: SA110815C07-1 4 Report Format Version 4.0.0 Reference No.: 110916C03 1. CERTIFICATION PRODUCT: 802.11 a/b/g/n Wireless Access Point BRAND NAME: Meraki MODEL NO.: MR66 APPLICANT: Meraki Inc. TEST ITEM: ENGINEERING SAMPLE TESTED: Aug. 22 ~ Sep. 8, 2011 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: ( Annie Chang / Senior Specialist ) APPROVED BY : , DATE: ( Ken Liu / Manager ) Report No.: SA110815C07-1 5 Report Format Version 4.0.0 Reference No.: 110916C03 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 30cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110815C07-1 6 Report Format Version 4.0.0 Reference No.: 110916C03 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For Mode A: MODULATION MODE FREQUENCY BAND (MHz) MAX CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 802.11b 2412-2462 21.99 14 30 0.352 1.00 802.11g 2412-2462 21.96 14 30 0.350 1.00 802.11n (20MHz) 2412-2462 24.93 11 30 0.346 1.00 802.11n (40MHz) 2422-2452 24.71 11 30 0.329 1.00 802.11a 5180-5240 5.91 17 30 0.017 1.00 802.11n (20MHz) 5180-5240 8.68 14 30 0.016 1.00 802.11n (40MHz) 5190-5230 8.90 14 30 0.017 1.00 802.11a 5745-5825 19.03 17 30 0.355 1.00 802.11n (20MHz) 5745-5825 21.95 14 30 0.348 1.00 802.11n (40MHz) 5755-5795 21.84 14 30 0.339 1.00 CONCULSION: Both of the modules can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN (2.4G) + WLAN (5.0G) = 0.352/1 + 0.355/1 = 0.707 Therefore, the maximum calculation of this situation is 0.707, which is less than the “1” limit. Report No.: SA110815C07-1 7 Report Format Version 4.0.0 Reference No.: 110916C03 For Mode B: MODULATION MODE FREQUENCY BAND (MHz) MAX CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 802.11b 2412-2462 24.38 8 30 0.153 1.00 802.11g 2412-2462 27.84 8 30 0.340 1.00 802.11n (20MHz) 2412-2462 27.82 5 30 0.169 1.00 802.11n (40MHz) 2422-2452 26.00 5 30 0.111 1.00 802.11a 5180-5240 12.98 10 30 0.018 1.00 802.11n (20MHz) 5180-5240 15.95 7 30 0.017 1.00 802.11n (40MHz) 5190-5230 15.99 7 30 0.018 1.00 802.11a 5745-5825 25.89 10 30 0.344 1.00 802.11n (20MHz) 5745-5825 28.05 7 30 0.283 1.00 802.11n (40MHz) 5755-5795 28.19 7 30 0.292 1.00 CONCULSION: Both of the modules can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN (2.4G) + WLAN (5.0G) = 0.340/1 + 0.344/1 = 0.684 Therefore, the maximum calculation of this situation is 0.684, which is less than the “1” limit. --- END ---

Test Report

Report No.: RF110815C07 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF110815C07 MODEL NO.: MR66 FCC ID: UDX-60019010 RECEIVED: Aug. 15, 2011 TESTED: Aug. 22 ~ Sep. 8, 2011 ISSUED: Sep. 30, 2011 APPLICANT: Meraki Inc. ADDRESS: 660 Alabama St, 4th floor, San Francisco, CA 94110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) This test report consists of 256 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110815C07 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................5 1. CERTIFICATION..............................................................................................6 2. SUMMARY OF TEST RESULTS......................................................................7 2.1 MEASUREMENT UNCERTAINTY...................................................................7 3. GENERAL INFORMATION..............................................................................8 3.1 GENERAL DESCRIPTION OF EUT.................................................................8 3.2 DESCRIPTION OF TEST MODES.................................................................10 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST............................................12 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.................13 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS................................18 3.4 DESCRIPTION OF SUPPORT UNITS...........................................................18 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND).....................................19 4.1 CONDUCTED EMISSION MEASUREMENT.................................................19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...............................19 4.1.2 TEST INSTRUMENTS...................................................................................19 4.1.3 TEST PROCEDURES....................................................................................20 4.1.4 DEVIATION FROM TEST STANDARD..........................................................20 4.1.5 TEST SETUP.................................................................................................21 4.1.6 EUT OPERATING CONDITIONS...................................................................21 4.1.7 TEST RESULTS.............................................................................................22 4.2 RADIATED EMISSION MEASUREMENT......................................................26 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT....................................26 4.2.2 TEST INSTRUMENTS...................................................................................27 4.2.3 TEST PROCEDURES....................................................................................28 4.2.4 DEVIATION FROM TEST STANDARD..........................................................28 4.2.5 TEST SETUP.................................................................................................29 4.2.6 EUT OPERATING CONDITIONS...................................................................29 4.2.7 TEST RESULTS.............................................................................................30 4.3 6DB BANDWIDTH MEASUREMENT.............................................................56 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT..........................................56 4.3.2 TEST INSTRUMENTS...................................................................................56 4.3.3 TEST PROCEDURE......................................................................................56 4.3.4 DEVIATION FROM TEST STANDARD..........................................................56 4.3.5 TEST SETUP.................................................................................................57 4.3.6 EUT OPERATING CONDITIONS...................................................................57 4.3.7 TEST RESULTS.............................................................................................58 4.4 MAXIMUM OUTPUT POWER........................................................................66 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT.........................66 4.4.2 INSTRUMENTS.............................................................................................66 4.4.3 TEST PROCEDURES....................................................................................66 4.4.4 DEVIATION FROM TEST STANDARD..........................................................67 4.4.5 TEST SETUP.................................................................................................67 Report No.: RF110815C07 3 Report Format Version 4.0.0 4.4.6 EUT OPERATING CONDITIONS...................................................................67 4.4.7 TEST RESULTS.............................................................................................68 4.5 POWER SPECTRAL DENSITY MEASUREMENT.........................................70 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT......................70 4.5.2 TEST INSTRUMENTS...................................................................................70 4.5.3 TEST PROCEDURE......................................................................................70 4.5.4 DEVIATION FROM TEST STANDARD..........................................................71 4.5.5 TEST SETUP.................................................................................................71 4.5.6 EUT OPERATING CONDITION.............…

Text truncated - open the document above for the full version.

Test Report

Report No.: RF110815C07-1 1 Report Format Version 4.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF110815C07-1 MODEL NO.: MR66 FCC ID: UDX-60019010 RECEIVED: Aug. 15, 2011 TESTED: Aug. 22 ~ Sep. 8, 2011 ISSUED: Sep. 30, 2011 APPLICANT: Meraki Inc. ADDRESS: 660 Alabama St, 4th floor, San Francisco, CA 94110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) This test report consists of 135 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110815C07-1 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................4 1. CERTIFICATION............................................................................................5 2. SUMMARY OF TEST RESULTS....................................................................6 2.1 MEASUREMENT UNCERTAINTY..................................................................6 3. GENERAL INFORMATION.............................................................................7 3.1 GENERAL DESCRIPTION OF EUT...............................................................7 3.2 DESCRIPTION OF TEST MODES.................................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST..........................................10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS..............................14 3.4 DESCRIPTION OF SUPPORT UNITS.........................................................14 4. TEST TYPES AND RESULTS......................................................................15 4.1 CONDUCTED EMISSION MEASUREMENT...............................................15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT.............................15 4.1.2 TEST INSTRUMENTS.................................................................................15 4.1.3 TEST PROCEDURES..................................................................................16 4.1.4 DEVIATION FROM TEST STANDARD........................................................16 4.1.5 TEST SETUP...............................................................................................17 4.1.6 EUT OPERATING CONDITIONS.................................................................17 4.1.7 TEST RESULTS...........................................................................................18 4.2 RADIATED EMISSION MEASUREMENT....................................................22 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT..................................22 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS22 4.2.3 TEST INSTRUMENTS.................................................................................23 4.2.4 TEST PROCEDURES..................................................................................24 4.2.5 DEVIATION FROM TEST STANDARD........................................................24 4.2.6 TEST SETUP...............................................................................................25 4.2.7 EUT OPERATING CONDITION...................................................................25 4.2.8 TEST RESULTS...........................................................................................26 4.3 PEAK TRANSMIT POWER MEASUREMENT.............................................44 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT...........................44 4.3.2 TEST INSTRUMENTS.................................................................................44 4.3.3 TEST PROCEDURE....................................................................................45 4.3.4 DEVIATION FROM TEST STANDARD........................................................45 4.3.5 TEST SETUP...............................................................................................45 4.3.6 EUT OPERATING CONDITIONS.................................................................45 4.3.7 TEST RESULTS...........................................................................................46 4.4 PEAK POWER EXCURSION MEASUREMENT..........................................52 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT........................52 4.4.2 TEST INSTRUMENTS.................................................................................52 4.4.3 TEST PROCEDURE....................................................................................52 4.4.4 DEVIATION FROM TEST STANDARD........................................................53 Report No.: RF110815C07-1 3 Report Format Version 4.0.0 4.4.5 TEST SETUP...............................................................................................53 4.4.6 EUT OPERATING CONDITIONS.................................................................53 4.4.7 TEST RESULTS...........................................................................................54 4.5 PEAK POWER SPECTRAL DENSITY MEASUREMENT............................66 4.5.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT..........66 4.5.2 TEST INSTRUMENTS.................................................................................66 4.5.3 TEST PROCEDURES..................................................................................66 4.5.4 DEVIATION FROM TEST STANDARD........................................................67 4.5.5 TEST SETUP...............................................................................................67 4.5.6 EUT OPERATING CONDITIONS..............................................................…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Aurelio Llabres

[email protected]415-432-1000Fax: 415-632-5899

Technical Contact

Bureau Veritas CPS (H.K.) Ltd. Taoyuan BranchGary Chang

[email protected]886-3-3183232

No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang · Taoyuan Hsien · Taiwan

Non-Technical Contact

Bureau Veritas CPS (H.K.) Ltd. Taoyuan BranchNatacha Chen

[email protected]886-3-3183232

Test Firm

Bureau Veritas CPS (H.K.) Ltd. Taoyuan BranchRichard Chen

[email protected]886-3-3183232Fax: 886-3-2115834

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15E	5.18 GHz - 5.24 GHz	40.00 mW

Confidentiality

Long Term

Grant Notes

Power listed is the maximum combined conducted output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.