UHW-10030010Microwave Oven

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Guangdong Galanz Enterprises Co., Ltd. Address 25 Ronggui Nan.Rd., Shunde,, Foshan, Guangdong, China FRN 0015339542 Grantee Code UHW FCC ID UHW-10030010 Authorized Contact Name Valley Wang Contact Email [email protected] Contact Phone 0757-28886389-2937 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Guangdong Galanz Enterprises Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Guangdong Galanz Enterprises Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: Date: 2024/2/19 Print Name: Valley Wang Title: - *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Guangdong GalanzEnterprisesCo., Ltd. U.S.Agent Designationfor Serviceof Process (Applicant andU.S.Agentare Separate Parties) TO:FederalCommunicationsCommission 7435 OaklandMillsRoad Columbia,MD 21046 ATTENTION: FCCCertification– Section 2.911(d)(7)Information DesignatedU.S.Agent CompanyName:United Consulting Technology ServicesCo.,Ltd. FRN:0033495714 ContactName:DavidWu Street Address: 17800CASTLETON STSTE665 CITYOF INDUSTRYCA 91748 United States TelephoneNo: (626) 217-4022 Email:[email protected] This letteris to confirmthat we (“ the DesignatedU.S.Agent) have accepted theresponsibilityto act as the DesignatedU.S.Agentfor ServiceofProcessas requiredbysection 47CFR2.911(d)(7)onbehalfof the Applicantnotedbelow. U. S. AgentSignature: Date:2024/2/19 Signed by(PrintedName/Title):DavidWu/CEO The Applicant acknowledges that they must maintain an agentfor no less than one year after terminating all m arketing and importationOR the conclusionof any Commission-related proceedinginvolvingthe equipment.The applicant further acknowledges theirresponsibilityto inform theFCCwhenever the DesignatedU.S.Agent informationabovechanges. Applicant Company name: Guangdong Galanz EnterprisesCo., Ltd. FRN:0015339542 GranteeCode:UHW FCCID: UHW-10030010 ContactName:Valley Wang Street Address: 25RongguiNan.Rd.,Shunde, City/Province/Zip:Foshan, Guangdong, -, - TelephoneNo: 0757-28886389-2937 Email:[email protected] Applicant Signature: Date: 2024/2/19 Signedby (PrintedName/Title): Valley Wang/ -

Guangdong Galanz Enterprises Co., Ltd. Authority letter FCC Date: 2024/1/22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: UHW-10030010 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Valley Wang Title:- Signature: On behalf of Company: Guangdong Galanz Enterprises Co., Ltd.

Guangdong Galanz Enterprises Co., Ltd. Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Guangdong Galanz Enterprises Co., Ltd. 25 RongguiNan.Rd., Shunde,, Foshan, Guangdong, China Regarding: Confidentiality Request regarding application for FCC ID:UHW-10030010 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Valley Wang Title:- Signature: On behalf of Company: Guangdong Galanz Enterprises Co., Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZEM2401000574HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4

材料：透明底黑字 135x90mm 3105816 CONFORMS TO UL STD. 923 Modelo: BFCMS811WEST10 Model：BFCMS811WEST10 FCC ID: UHW-10030010 FCC ID: UHW-10030010

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 7 Appendix Internal Photos for GZEM2401000574HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 7 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 7 of 7

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 1 of 40 FCC ID: UHW-10030010 Ricky Liu Manager TEST REPORT Application No.: GZEM2401000574HS Applicant:Guangdong Galanz Enterprises Co., Ltd. Address of Applicant:25 Ronggui Nan Road, Shunde, Foshan, Guangdong, China Manufacturer:Guangdong Galanz Microwave Electrical Appliances Manufacturing Co., Ltd. Address of Manufacturer:3 Xingpu Avenue, Huangpu, Zhongshan, Guangdong, China. Factory:1. Guangdong Galanz Microwave Electrical Appliances Manufacturing Co., Ltd. 2. Guangdong Galanz Microwave Oven and Electrical Appliances Manufacturing Co., Ltd. Address of Factory:1. 3 Xingpu Avenue, Huangpu, Zhongshan, Guangdong, China. 2. 25 Ronggui Nan Road, Shunde, Foshan, Guangdong, China Product Name:Microwave Oven Model No.: P100N30(X)-(Y), P100N30(X)H-(Y), P100N30MLH-S8(L2), P100N30(X)- (Y)(L2), P100N30(X)H-(Y)(L2), BFCMS811WEST10, OGH31101S, OGH31102S, GSWWD11S1S10, GSWWD11S2S10, GSWWD11BKS10, HH1001219, 043-7040-0, BTFCMS811WEST10, BTFCMS811BKST10, BTFCMS811GNST10, BTFCMS811GYST10, BTFCMS811BEST10, EM031MC1-L2 Variable (x) may be L, P, SL, SP, TL, TP, YL, YP, YTL, YTP, AL, AP, ASL, ASP, ATL, ATP, AYL, AYP, AYTL, AYTP, EL, EP, ESL, ESP, ETL, ETP, EYL, EYP, EYTL, EYTP, ML, MP, MSL, MSP, MTL, MTP, MYL, MYP, MYTL, MYTP. Variable (y) may compose by one to five characters from A to Z and/or numbers from 0 to 9. It represents the differences of the appearance.   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark:GALANZ, BEAUTIFUL, Hamilton Beach Standard(s) : 47 CFR Part 18 Date of Receipt: 2024-01-25 Date of Test: 2024-01-27 to 2024-01-30 Date of Issue: 2024-02-19 Test Result:Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 2 of 40 Revision Record VersionReport No.DateRemark 01GZEM2401000574022024-02-19Original Authorized for issue by: Damon Guan/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 3 of 40 2Test Summary Emission Part ItemStandardMethodRequirementResult Conducted Emissions at Mains Terminals (150kHz-30MHz) FCC/OST MP-5:198618.307Pass Radiated Emissions (Magnetic field Strength)(9kHz- 30MHz) FCC/OST MP-5:198618.305(b)Pass Radiated Emissions (30MHz-1GHz) FCC/OST MP-5:198618.305(b)Pass Radiated Emissions (above 1GHz) FCC/OST MP-5:198618.305(b)Pass Output Power Measurement FCC OST/MP-5:1986 FCC OST/MP-5:1986 Clause 4.3 Pass Operating Frequency Measurement FCC OST/MP-5:198618.301Pass Radiation Hazard Test 47 CFR Part 18 FCC OST/MP-5:19861 mW/cm 2 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. Declaration of EUT Family Grouping: Model No.: P100N30(X)-(Y), P100N30(X)H-(Y), P100N30MLH-S8(L2), P100N30(X)-(Y)(L2), P100N30(X)H-(Y)(L2), BFCMS811WEST10, OGH31101S, OGH31102S, GSWWD11S1S10, GSWWD11S2S10, GSWWD11BKS10, HH1001219, 043-7040-0, BTFCMS811WEST10, BTFCMS811BKST10, BTFCMS811GNST10, BTFCMS811GYST10, BTFCMS811BEST10, EM031MC1-L2 Variable (x) may be L, P, SL, SP, TL, TP, YL, YP, YTL, YTP, AL, AP, ASL, ASP, ATL, ATP, AYL, AYP, AYTL, AYTP, EL, EP, ESL, ESP, ETL, ETP, EYL, EYP, EYTL, EYTP, ML, MP, MSL, MSP, MTL, MTP, MYL, MYP, MYTL, MYTP. Variable (y) may compose by one to five characters from A to Z and/or numbers from 0 to 9. It represents the differences of the appearance. According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on the outer appearance and model name. Therefore, only one model P100N30MLH-S8(L2) was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 4 of 40 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................6 4.1Details of E.U.T.................................................................................................................................6 4.2Description of Support Units..............................................................................................................6 4.3Measurement Uncertainty.................................................................................................................6 4.4Test Location.....................................................................................................................................6 4.5Test Facility.......................................................................................................................................7 4.6Deviation from Standards..................................................................................................................7 4.7Abnormalities from Standard Conditions...........................................................................................7 5Equipment List.........................................................................................................................................8 6Emission Test Results.............................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 1 of 40 FCC ID: UHW-10030010 Ricky Liu Manager TEST REPORT Application No.: GZEM2401000574HS Applicant:Guangdong Galanz Enterprises Co., Ltd. Address of Applicant:25 Ronggui Nan Road, Shunde, Foshan, Guangdong, China Manufacturer:Guangdong Galanz Microwave Electrical Appliances Manufacturing Co., Ltd. Address of Manufacturer:3 Xingpu Avenue, Huangpu, Zhongshan, Guangdong, China. Factory:1. Guangdong Galanz Microwave Electrical Appliances Manufacturing Co., Ltd. 2. Guangdong Galanz Microwave Oven and Electrical Appliances Manufacturing Co., Ltd. Address of Factory:1. 3 Xingpu Avenue, Huangpu, Zhongshan, Guangdong, China. 2. 25 Ronggui Nan Road, Shunde, Foshan, Guangdong, China Product Name:Microwave Oven Model No.: P100N30(X)-(Y), P100N30(X)H-(Y), P100N30MLH-S8(L2), P100N30(X)- (Y)(L2), P100N30(X)H-(Y)(L2), BFCMS811WEST10, OGH31101S, OGH31102S, GSWWD11S1S10, GSWWD11S2S10, GSWWD11BKS10, HH1001219, 043-7040-0, BTFCMS811WEST10, BTFCMS811BKST10, BTFCMS811GNST10, BTFCMS811GYST10, BTFCMS811BEST10, EM031MC1-L2 Variable (x) may be L, P, SL, SP, TL, TP, YL, YP, YTL, YTP, AL, AP, ASL, ASP, ATL, ATP, AYL, AYP, AYTL, AYTP, EL, EP, ESL, ESP, ETL, ETP, EYL, EYP, EYTL, EYTP, ML, MP, MSL, MSP, MTL, MTP, MYL, MYP, MYTL, MYTP. Variable (y) may compose by one to five characters from A to Z and/or numbers from 0 to 9. It represents the differences of the appearance.   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark:GALANZ, BEAUTIFUL, Hamilton Beach Standard(s) : 47 CFR Part 18 Date of Receipt: 2024-01-25 Date of Test: 2024-01-27 to 2024-01-30 Date of Issue: 2024-02-19 Test Result:Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 2 of 40 Revision Record VersionReport No.DateRemark 01GZEM2401000574022024-02-19Original Authorized for issue by: Damon Guan/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 3 of 40 2Test Summary Emission Part ItemStandardMethodRequirementResult Conducted Emissions at Mains Terminals (150kHz-30MHz) FCC/OST MP-5:198618.307Pass Radiated Emissions (Magnetic field Strength)(9kHz- 30MHz) FCC/OST MP-5:198618.305(b)Pass Radiated Emissions (30MHz-1GHz) FCC/OST MP-5:198618.305(b)Pass Radiated Emissions (above 1GHz) FCC/OST MP-5:198618.305(b)Pass Output Power Measurement FCC OST/MP-5:1986 FCC OST/MP-5:1986 Clause 4.3 Pass Operating Frequency Measurement FCC OST/MP-5:198618.301Pass Radiation Hazard Test 47 CFR Part 18 FCC OST/MP-5:19861 mW/cm 2 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. Declaration of EUT Family Grouping: Model No.: P100N30(X)-(Y), P100N30(X)H-(Y), P100N30MLH-S8(L2), P100N30(X)-(Y)(L2), P100N30(X)H-(Y)(L2), BFCMS811WEST10, OGH31101S, OGH31102S, GSWWD11S1S10, GSWWD11S2S10, GSWWD11BKS10, HH1001219, 043-7040-0, BTFCMS811WEST10, BTFCMS811BKST10, BTFCMS811GNST10, BTFCMS811GYST10, BTFCMS811BEST10, EM031MC1-L2 Variable (x) may be L, P, SL, SP, TL, TP, YL, YP, YTL, YTP, AL, AP, ASL, ASP, ATL, ATP, AYL, AYP, AYTL, AYTP, EL, EP, ESL, ESP, ETL, ETP, EYL, EYP, EYTL, EYTP, ML, MP, MSL, MSP, MTL, MTP, MYL, MYP, MYTL, MYTP. Variable (y) may compose by one to five characters from A to Z and/or numbers from 0 to 9. It represents the differences of the appearance. According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on the outer appearance and model name. Therefore, only one model P100N30MLH-S8(L2) was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZEM240100057402 Page: 4 of 40 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................6 4.1Details of E.U.T.................................................................................................................................6 4.2Description of Support Units..............................................................................................................6 4.3Measurement Uncertainty.................................................................................................................6 4.4Test Location.....................................................................................................................................6 4.5Test Facility.......................................................................................................................................7 4.6Deviation from Standards..................................................................................................................7 4.7Abnormalities from Standard Conditions...........................................................................................7 5Equipment List.........................................................................................................................................8 6Emission Test Results.............................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 5 Appendix Test Setup Photo for GZEM240100057402 Test Model No.: P100N30MLH-S8(L2) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 5 Test Setup Photo Conducted Emissions at Mains Terminals (150kHz-30MHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 5 Radiated Emissions (Magnetic field Strength)(9kHz-30MHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 4 of 5 Radiated Emissions (30MHz-1GHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 5 of 5 Radiated Emissions (above 1GHz) & Operating Frequency Measurement Radiation Hazard Test