UQACTD1000CONCEALED WEAPON RADAR DETECTOR

Concealed Threat Detector Installation and Operations Manual CTD 1000 Series, version 01 A Safe Zone Systems 7700 Ouray NW Albuquerque, New Mexico 87120 USA Safe Zone Systems ◘ Concealed Threat Detection System Safe Zone Concealed Threat Detection System Installation and Operations Manual TABLE OF CONTENTS INTRODUCTION...............................................................................................................1 Check your environment—Site Survey..........................................................................1 Unpack parts from box(es)............................................................................................1 Parts List....................................................................................................................2 Options List................................................................................................................2 User Supplied............................................................................................................2 CTD Configurations.......................................................................................................2 Layout Diagrams...........................................................................................................3 Layout for a CTD 1000 (single unit system)...............................................................3 Layout for a CTD 1002 (two unit system)..................................................................4 Layout for a CTD 1003 (three unit system)................................................................5 EVALUATION SETUP......................................................................................................6 Get ready.......................................................................................................................6 Dimension Guidelines....................................................................................................6 Position Components....................................................................................................7 CTD unit.....................................................................................................................7 Prompter Monitor.......................................................................................................8 Operator Monitor and Keyboard................................................................................8 Test Area...................................................................................................................8 Installing the Software...................................................................................................9 Computer System Requirements...............................................................................9 Connections.................................................................................................................10 Wiring Diagrams (CTD 1000, CTD 1002, CTD 1003)..............................................10 Connection Instructions...........................................................................................13 Setting up Communications using the Software..........................................................15 Test Monitors...............................................................................................................18 Aiming the CTD...........................................................................................................19 Testing for Background Levels and Range.................................................................21 Testing for Background Levels................................................................................22 Testing for Range—for CTD 1000, CTD1002, and CTD 1003................................24 Testing for Background Level and Range –only for CTD 1002 or CTD 1003..........28 Testing / Scanning Subjects........................................................................................30 Test Results.............................................................................................................35 PERMANENT INSTALLATION.......................................................................................37 Considerations.............................................................................................................37 Weather...................................................................................................................37 Dust..........................................................................................................................37 Mounting..................................................................................................................37 Concealment............................................................................................................37 Operator’s Station....................................................................................................38 Security System Interface........................................................................................38 Installation and Operations Manual i Safe Zone Systems ◘ Concealed Threat Detection System OPERATIONS.................................................................................................................39 To Start Daily Operations............................................................................................39 Keyboard Operations Menu.........................................................................................39 To Run Tests...........................................................................................................40 Taking Readings......................................................................................................40 Results.....................................................................................................................42 Response..................................................…

Text truncated - open the document above for the full version.

Response to TIMCO TCB questions 1. BLOCK DIAGRAM: The frequencies of all thee clocks and oscillators must be on the block diagram, please provide a current block diagram. A block diagram was provided by the client and passed on with the current revision of the test report. 2. Label Location: Please provide a drawing or a photo showing the location of the label. The client has provided an exhibit photo showing the location of the label. 3. Part 2.1033(c )(10) Please provide a parts list BOM. The client has provided an exhibit BOM list. 4. Part 2.1033(c )(9) Please provide tune-up procedure over the power range, or at specific operating power levels. This is not applicable. 5. Operating Frequency – part 90.103(b) and (d), and 2.106: According to 2.106, please find below the frequency allocation breakdown in MHz for the pband requested on form 731. 9500-10000 nc radiolocation The unit performs radiolocation. 10000-10550 pt 90 – Pulsed emissions prohibited in 10500-10550 There are no pulsed emissions. 10550-10680 pt 101 The unit operates from 9500-10550. 10680-10700 nc radioastronomy etc. The unit operates from 9500-10550. Only the band 9,500-10,550 can be authorized under part 90 without conflicting with other rule parts. Particularly, please provide details about intended used in non-part 90 bands, e.g., some details for possible known government uses. Alternatively, please revise the filing. The filing has been revised. 6. Part 90.103(c )(24): Please explain compliance with this paragraph. The unit is compliant as it is not a field disturbance sensor. 7. Form 731 – part 90.205(r ) The output power shall not exceed by more than 20 percent either the output power shown in the Radio Equipment List [available in accordance with 90.203(a)(1) for transmitters included in this list or when not so listed, the manufacturer’s rated output power for the particular transmitter specifically listed on the authorization. The maximum measured power is 0.138W while the rated power is 0.1W. Please explain or revise accordingly. The power has been revised by the client to 0.2 Watts and has been noted throughout the test report. 8. RF output power – ERP: The maximum measured value is ~2Watt where the conducted power is ~0.14W. Please explain this difference of about 13 dB (e.g. provide antenna gain in dBd...). 9. Conducted spurious emission: Column “level, dBc” contains errors. Most of the Emission levels reported in this column are exceeding the limit of 33dBc. Please revise. FYI – adding a negative sign in front of a level expressed in terms of dBc is not relevant. The data in the report has been revised. 10. Please provide test data as required under part 2.1055 – Frequency stability. Please note that although there is no frequency stability limit, this test still required per part 2.1033(c )(14). The frequency stability has been added to the report. 11. Form 731: Please provide the emission designator and the frequency stability measured. The emission designator has been added to the report. The second part of this question is redundant to question 10. 12. Occupied bandwidth plot. Thee plot is blurry and difficult to read. Please provide a new plot with spectrum analyzer settings and comments where appropriate (i.e. mode of operation, power, modulation if any etc.) Occupied bandwidth plot has been cleaned up. 13. Part 90.203(e) – programming capability: Please provide an attestation of compliance with this section. An attestation has been added to the report. Please note that there is NO user programming capability. 14. Part 90.103(c )(24): Please explain compliance with this paragraph. Redundant to question 6. 15. FYI – Once we have completed our review of this application we will up load all of the files to the FCC Website including the confidential ones and we will stop before we issue the Certification and send you the TC# so that you can view the files as they will appear on the FCC website indicating that they are OKAY or telling us what is wrong. After you have confirmed everything is correct then we will issue the Certification. Respectfully submitted, Michael Wyman Engineer

November 22, 2006 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: CONFIDENTIALITY REQUEST FOR MODEL CTD1000 FCCID: UQACDT1000 Dear Sir: Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission's Rules, the Applicant hereby requests permanent confidential treatment of some of the information accompanying this Application, as listed below: Exhibit Type File Name Block Diagram 1012-014 RF Block Diagram Rev E.pdf Schematic Diagrams 1012-006 Processor PCB Schematic Rev D. pdf And 1012-007 Connector PCA Schematic Rev C.pdf And 1012-008 Power PCB Schematic.pdf Theory of Operation Theory of Op.pdf Calibration Procedures Calibration.pdf Active Devices Active Devices.pdf These materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457 (d)(1)(ii), disclosure of the Application and all accompanying documentation will not be made before the date of Grant for the Application. Sincerely, The MacAleese Companies, Inc., dba Safe Zone Coda C. Roberson President

Level 0Level 1Level 2Level 3Level 4VendorQty Unit AntennaJEM Engineering1 Camera Mount Assembly1 Camera Assembly1 CameraSupercircuits,Inc1 Camera MountMachining Solutions1 Laser Assembly1 LaserRoithner1 Connector Panel Assembly1 Connector BracketMachining Solutions1 Connector PCA1 Fan guard-40Digikey2 Fan-40-10-5VDigikey1 Switch Assembly1 39-00-0039Digikey2 39-01-4030Digikey1 SW_POWERDigikey1 Enclosure1 CaseTCS Industries1 Enclosure Bracket InsideTCS Industries2 Enclosure Bracket OutsideTCS Industries2 Internal Cables1 RF Cables1 Cable Semiflex 7"RF Connection Inc.2 Cable Semiflex 8.5"RF Connection1 Ribbon Cables1 DB15IDC_FEMALEDigikey1 DB15IDC_MALEDigikey1 IDC-RIB10Digikey1 IDC-RIB16Digikey1 IDC-RIB26Digikey1 IDC10Digikey3 IDC16Digikey4 IDC26Digikey2 LED Assembly1 LED-PANEL-GRNDigikey1 Name Plate1 Power Assembly1 Power PCA1 20BQ030Digikey3 30WQ03FNDigikey1 Processor Assembly1 Processor PCA1 LM74Digikey1 LP3961EMP-1.8Digikey1 LP3961EMP-3.3Digikey1 ML10Digikey7 ML14_NO6RADigikey1 ML16L:Digikey2 ML26L:Digikey1 OSC-SMDDigikey1 PVDZ172NSDigikey3 SN65HVD230Digikey2 SN74AHCT541PWRDigikey5 SN74AUG1G06Digikey1 TMS3207812PGFNewark1 TPS3823-33Digikey1 Video card socketBisco2 Video overlay generatorDecade Engineering2 RF Assembly1 RF Unit1 IF PCA1 RF SystemMid Altantic RF1

Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Date: November 22, 2006 Applicant: Safe Zone, Inc. 7700 Ouray NW Albuquerque, NM 87120 Attention of: Coda C. Roberson President 505/833-1840 505/833-1842 FAX [email protected] Equipment: CTD-1000 FCC ID: FCC Rules: Radiofrequency Radiation Exposure Limits 47 CFR 1.1310 MPE - Mobiles Fixed Based Station Gentlemen: Enclosed please find your copy of the Supplemental Test Data Report, the whole for Environmental Assessment (MPE) of the referenced equipment as shown. Please allow from 8-12 weeks to hear from the Commission, who may request additional data or information, and even a sample for pre-grant audit testing. Should you need any clarification, just fax or phone. Thank you again for this order - it has been a pleasure to be of service. enclosure(s) HSB/hsb Sincerely yours, Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Date: November 22, 2006 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Safe Zone, Inc. Equipment: CTD-1000 FCC ID: UQA CTD1000 FCC Rules: Radiofrequency Radiation Exposure Limits 47 CFR 1.1310 MPE - Mobiles Fixed Based Station X Gentlemen: On behalf of the Applicant, enclosed please find the Supplemental Test Data Report, the whole for Environmental Assessment (MPE) of the referenced equipment as shown. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. enclosure(s) cc: Applicant HSB/hsb Sincerely yours, Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Environmental Assessment for Mobiles/Fixed Base Station for FCC ID: UQA CTD1000 Model:CTD-1000 to Federal Communications Commission 47 CFR 1.1310 (MPE) Radiofrequency Radiation Exposure Limits Date Of Report: November 22, 2006 On the Behalf of the Applicant: Safe Zone, Inc. At the Request of: Safe Zone, Inc. 7700 Ouray NW Albuquerque, NM 87120 Attention of: Coda C. Roberson President 505/833-1840 505/833-1842 FAX [email protected] Supervised By: Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Table of Contents Rule Description Page . Test Report 1 . Identification of the Equipment Under Test 2 . Standard Test Conditions and Engineering Practices 3 1.1310 Environmental Assessment 4 Flom Test Labs 3356 North San Marcos Place, Suite 107 Page 1 of 5 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) Test Report (Supplemental) b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d06b0029 d) Client: Safe Zone, Inc. 7700 Ouray NW Albuquerque, NM 87120 e) Identification: CTD-1000 Description: Concealed Threat Detector (Radar) f) EUT Condition: Not required unless specified in individual tests. g) Report Date: November 22, 2006 EUT Received: h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: Hoosamuddin S. Bandukwala, Lab Director n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. Flom Test Labs 3356 North San Marcos Place, Suite 107 Page 2 of 5 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Identification of the Equipment Under Test (EUT) Name and Address of Applicant: Safe Zone, Inc. 7700 Ouray NW Albuquerque, NM 87120 Manufacturer: Safe Zone, Inc. 7700 Ouray NW Albuquerque, NM 87120 FCC ID: Model Number: CTD-1000 Description: Concealed Threat Detector (Radar) Type of Emission: Frequency Range, MHz: 9.5 GHz to 10.55GHz Power Rating, Watts: 0.1 Switchable Variable x N/A Modulation: AMPS TDMA CDMA X OTHER Antenna: Helical Monopole Whip X Other Note: For RF Safety test antenna gain taken at the upper range of expected gain (i.e. 0 dBd) and RF Power set to highest nominal power across all channels. Flom Test Labs 3356 North San Marcos Place, Suite 107 Page 3 of 5 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Standard Test Conditions and Engineering Practices A2LA “A2LA has accredited Flom Test Labs, Inc. Chandler, AZ for technical competence in the field of Electrical Testing. The accreditation covers the specific tests and types of tests listed on the agreed scope of accreditation. This laboratory meets the requirements of ISO 17025:2005 ‘General Requirements for the Competence of Testing and Calibration Laboratories’ and any additional program requirements in the identified field of testing.” Please refer to www.a2la.org for current scope of accreditation. Certificate Number: 2152.01 Flom Test Labs 3356 North San Marcos Place, Suite 107 Page 4 of 5 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax FTL p0690010, d06b0029 Name of Test: Environmental Assessment Specification: FCC: 47 CFR 1.1310 Measurement Guide: ANSI/IEEE C95.1 1992 Test Equipment: Maximum Permissible Exposure (MPE) measurement system, consisting of: Narda 8717-1174R, Radiation meter Narda 8761D, E-field probe (30…

Text truncated - open the document above for the full version.

Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax MFA p0690010, d06b0019 Date: November 15, 2006 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Safe Zone, Inc. Equipment: CTD-1000 FCC ID: UQA CTD1000 FCC Rules: 90 Subpart F Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. enclosure(s) cc: Applicant HSB/hsb Sincerely yours, Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax MFA p0690010, d06b0019 Date: November 15, 2006 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Safe Zone, Inc. Equipment: CTD-1000 FCC ID: UQA CTD1000 FCC Rules: 90 Subpart F Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown i.e.: a) Application Form b) Test Report (if applicable) c) Filing Fees d) Copy of Original Grant e) Expository Statement and/or letter by Applicant f) Photos (if applicable) g) Label Drawing (if changes have been made) We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, Hoosamuddin S. Bandukwala, Lab Director enclosure(s) cc: Applicant HSB/hsb Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax MFA p0690010, d06b0019 Transmitter Certification of Model: CTD-1000 to Federal Communications Commission Rule Part(s) 90 Subpart F Date of report: November 15, 2006 Date of Revised Report: July 27, 2007 On the Behalf of the Applicant: Safe Zone, Inc. At the Request of: Safe Zone, Inc. 7700 Ouray NW Albuquerque, NM 87120 Attention of: Coda C. Roberson President 505/833-1840 505/833-1842 FAX [email protected] Supervised by: Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs 3356 North San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax MFA p0690010, d06b0019 List of Exhibits (FCC Certification (Transmitters) - Revised 9/28/98) Applicant: Safe Zone, Inc. FCC ID: UQA CTD1000 By Applicant: 1. Letter of Authorization 2. Confidentiality Request: 0.457 And 0.459 3. Part 90.203(e) & (g) Attestation 4. Identification Drawings, 2.1033(c)(11) Label Location of Label Compliance Statement Location of Compliance Statement 5. Photographs, 2.1033(c)(12) 6. Documentation: 2.1033(c) (3) User Manual (9) Tune Up Info (10) Schematic Diagram (10) Circuit Description Block Diagram Parts List Active Devices 7. RF Exposure – See User and Operational Manual. By M.F.A. Inc.: A. Testimonial & Statement of Certification Flom Test Labs 3356 North San Marcos Place, Suite 107 Page 1 of Error! Bookmark not defined. Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax MFA p0690010, d06b0019 The Applicant has been cautioned as to the following: 15.21 Information to the User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. Flom Test Labs 3356 North San Marcos Place, Suite 107 Page 2 of Error! Bookmark not defined. Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax MFA p0690010, d06b0019 Table of Contents Rule Description Page 2.1033(c)(14) Rule Summary 2 . Standard Test Conditions and Engineering Practices 3 2.1033(c) General Information Required 4 2.1046(a) Carrier Output Power (Conducted) 6 2.1046(a) ERP Carrier Power (Radiated) 8 2.1046(a) RF Power Output (Radiated) 8 2.1051 Unwanted Emissions (Transmitter Conducted) 9 2.1053(a) Field Strength of Spurious Radiation 13 2.1049(c)(1) Emission Masks (Occupied Bandwidth) 17 2.1055(a)(1) Frequency Stability (Temperature Variation) 19 Flom Test Labs 3356 North San Marcos Place, Suite 107 Page 1 of 20 Chandler, Arizona 85225-7176 FCC ID: UQACDT1000 (866) 311-3268 phone, (480) 926-3598 fax MFA p0690010, d06b0019 Require…

Text truncated - open the document above for the full version.

Page 1 of 1 11/22/2006file://L:\Project\2006\p0690010\PhotosFTL\SafeZone%20%20OATS.JPG