UR9WS-23003Crisp wind with Bluetooth

Quick guide Charging port MAGNET HS The magnetic ring on the back of the mobile phone is automatically absorbed or fixed with the mobile phone clip (Note: the magnetic ring adsorption is only applicable to the mobile phone with the magnetic sheet, other mobile phones please use the bracket to fix) The magnetic ring can be used horizontally and vertically.Device phone This product can be hand-held self-portrait, can also use tripod mode video or live broadcast.Camera and video mode After opening the support, hold the support with one hand and press the bottom triangle button with one hand, the three legs of the tripod will automatically open, pull the tripod, the tripod is completely open, and the tripod is used on a smooth horizontal surface. Note: Please do not hold the position of the tripod, it will not open the tripod. Use a tripod 滶 滷 PS PS 360° Charge description Insert the Type-C cable into the charging port of the remote control to charge it when the battery capacity of the remotecontrol is insufficient. Low battery prompt: Please charge it as soon as possible when the red light starts to flicker Dormant State:After the remote control is turned on,it will enter the dormant state and the flicker light will be off,if it is not connected to Bluetooth within 10 minutes.Also the remote will enter the dormant state,if it is connected to Bluetooth successfully but not be operated within 10 minutes,and then it will automatically turn off if not be operated within 30 minutes. Awakening from the dormant state: In the dormant state, the camera indicator light will be on once by short pressing the shutter button, and then enter the pairing flicker state. Remove the remote control Long press the shutter/power button for 3s to turn on the remote control,then the indicator light flashes green, and then turn on mobile phone Bluetooth to enter the search state,select “SELRUMI” from the list of available devices and the green light will be change from flashing green to steady green after the connection succeeds. Connect Bluetooth Usage method 1. Watch your hands during use.2. To protect your equipment, keep the tripod in a stable state and prevent other external forces from tipping the tripod over. 2. The product is not designed for children under 14 years old.Do not swallow it. 3. Do not dismantle or modify the product.4. Do not store the product in a humid environment.5. Keep the product away from heat sources.6. Do not expose the product to water or other liquids in caseof damage. Warnings SELRUMIBluetoothAvailable equipment Bluetooth Return

The mobile phone is smoothly installed in the mobile phone bracket, and the bracket part can be used horizontally and vertically. Charging port Remove the remote controlLong press the shutter/power button for 3s to turn on the remote control,then the indicator light flashes green, and then turn on mobile phone Bluetooth to enter the search state,select “SELRUMI” from the list of available devices and the green light will be change from flashing green to steady green after the connection succeeds. Install mobile phone Connect Bluetooth Both ends of the support are provided with a general cold boot port and 1/4 screw, which can be compatible with the market with cold boot fill light, 1/4 nut interface and other products, according to the requirements of the appropriate accessories. Universal cold boot and 1/4 screw (optional) 1 2 Charge des cription Insert the Type-C cable into the charging port of the remote control to charge it when the battery capacity of the remote control is insucient. Low battery prompt: Please charge it as soon as possible when th e red light starts to flicker Dormant State:After the remote control is turned on,it will enter the dormant state and the flicker light will be o,if it is not connected to Bluetooth within 10 minutes.Also the remote will enter the dormant state,if it is connected to Bluetooth successfully but not be operated within 10 minutes,and then it will automatically turn o if not be operated within 30 minutes. Awakening from the dormant state: In the dormant state, the camera indicator light will be on once by short pressing the shutter button, and then enter the pairing flicker state. Usage method 1. Watch your hands during use. 2. To protect your equipment, keep the tripod in a stable state and prevent other external forces from tipping the tripod over. 2. The product is not designed for children under 14 years old.Do not swallow it. 3. Do not dismantle or modify the product. 4. Do not store the product in a humid environment. 5. Keep the product away from heat sources. 6. Do not expose the product to water or other liquids in caseof damage. Warnings Note: Please do not hold the position of the tripod, it will not open the tripod. After opening the support, hold the support with one hand and press the bottom triangle button with one hand, the three legs of the tripod will automatically open, pull the tripod, the tripod is completely open, and the tripod is used on a smooth horizontal surface. Use a tripod Quick guide CRISP WIND SELRUMI Bluetooth Available equipment BluetoothReturn FCC ID:UR9WS-23003 FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authorityto operate the equipment. The device has been evaluated to meet general RF exposure requirement, The device can beused in portable exposure condition without restriction.

Winners’Sun Plastic & Electronic (Shenzhen) Co., Ltd. To: Federal Communications Commission Date: 2023-09-11 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Winners’Sun Plastic & Electronic (Shenzhen) Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Winners’Sun Plastic & Electronic (Shenzhen) Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: FCC ID: UR9WS-23003 If you have any questions, please feel free to contact me Contact Person: Dongmei Li Position in the Company: Certified engineer Date of Signature: 2023-09-11 ___________________________ Signatory (signature of the applicant)

Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. Detai Industrial Park, 496 Huarong Road, Langkou Community, Dalang Sub-district, Longhua District, Shenzhen, Guangdong, China Date: [2023-09-11] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [UR9WS-23003] US Agent – Attestation Statement / Part 2.911(d)(7) Winners’Sun Plastic & Electronic (Shenzhen) Co., Ltd.certifies, that as of [2023-09-11], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: [UR9WS- 23003]. Winners’Sun Plastic & Electronic (Shenzhen) Co., Ltd., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Winners’Sun Plastic & Electronic (Shenzhen) Co., Ltd.for FCC ID: [UR9WS-23003]. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Winners’Sun Plastic & Electronic (Shenzhen) Co., Ltd. FRN: 0015720634 Designated Agent: FCC US Agent, LLC Company Representative: Dongmei Li Designated Agent Representative: Tim Payne Signature: Signature:

Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. Date:2023-09-11 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd., the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID: UR9WS-23003 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. in connection with the Application shall have the same effect as acts of the Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd.. Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name: Dongmei Li Title: Certified engineer Tel: 86-755-33932252 Email: [email protected] Company name: Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd.

Declaration Letter Hereby, we, Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd., We declare that for model number: WS-23003 and MSM-CT1300M, WS-23003-1, MSM-MS1300Mhave the same hardware and software,WS-23003 and MSM-CT1300M are only different in model name, WS-23003 andWS-23003-1, MSM-MS1300M are different in model name and selfie stick which without any circuit, the others are the same, all RF parameters remain the same. The main test model is WS-23003. Please be noticed. Signatory Company name: Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. Contact name: Dongmei Li Date: 2023-09-11

Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. Date:2023-09-11 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: UR9WS-23003 To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality till date 180 days(max time 180 days from grant date) as outlined in Public Notice DA04-1705. This provision will give Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory: Contact name: Dongmei Li Title: Certified engineer Tel: 86-755-33932252 Email: [email protected] Company name: Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd.

FCC ID: UR9WS-23003 External Photos MODEL NAME: WS-23003, MSM-CT1300M 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view MODEL NAME: WS-23003-1, MSM-MS1300M 7. EUT front view 8. EUT rear view 9. EUT left side view 10. EUT right side view 11. EUT top view 12. EUT bottom view 13. Accessories MODEL NAME: WS-23003, MSM-CT1300M MODEL NAME: WS-23003-1, MSM-MS1300M

1、 Label 2、 Label location(on the back)

FCC ID: UR9WS-23003 Internal Photos MODEL NAME: WS-23003, MSM-CT1300M 1. EUT uncover view MODEL NAME: WS-23003-1, MSM-MS1300M 2. EUT uncover view 3. Antenna view MODEL NAME: WS-23003, MSM-CT1300M MODEL NAME: WS-23003-1, MSM-MS1300M Bluetooth Antenna Bluetooth Antenna

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 9 REPORT No.：SZ23080207S01 RF EXPOSURE EXEMPT REPORT APPLICANT : Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. PRODUCT NAME : Crisp wind MODEL NAME : WS-23003, MSM-CT1300M, WS-23003-1, MSM-MS1300M BRAND NAME : N/A FCC ID : UR9WS-23003 STANDARD(S) : 47 CFR Part 2(2.1093) RECEIPT DATE : 2023-08-21 TEST DATE :2023-08-21 to 2023-08-25 ISSUE DATE : 2023-09-11 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 9 REPORT No.：SZ23080207S01 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1 Applicant and Manufacturer Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2 Equipment Under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.3 Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2. Device Category and RF Exposure Limit ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 3. RF Output Power ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 4. RF Exposure Assessment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 Annex A Testing Laboratory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 Change History Version Date Reason for change 1.0 2023-09-11 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 9 REPORT No.：SZ23080207S01 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. Applicant Address: Detai Industrial Park, 496 Huarong Road, Langkou Community, Dalang Sub-district, Longhua District, Shenzhen, Guangdong, China Manufacturer: Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. Manufacturer Address: Detai Industrial Park, 496 Huarong Road, Langkou Community, Dalang Sub-district, Longhua District, Shenzhen, Guangdong, China 1.2 Equipment Under Test (EUT) Description Product Name: Crisp wind Sample No.: 1# Hardware Version: JM_QF_20230714 Software Version: svn784 Equipment Type: Bluetooth LE Bluetooth Version: 5.0 Operating Frequency Range: 2402MHz-2480MHz Modulation Type: GFSK(1Mbps) Antenna Type: PCB Antenna Antenna Gain: -0.58dBi Note 1: According to the certificate holder, they declared that the models WS-23003 and MSM-CT1300M, WS-23003-1, MSM-MS1300M have the same hardware and software, WS-23003 and MSM-CT1300M are only different in model name, WS-23003 and WS-23003-1, MSM-MS1300M are different in model name and selfie stick which without any circuit, the others are the same, all RF parameters remain the same. The main measuring model is WS-23003, only the results for WS-23003 were recorded in this report. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 9 REPORT No.：SZ23080207S01 1.3 Applied Reference Documents Leading reference documents for testing: Identity Document Title Method Determination /Remark 47 CFR Part 2(2.1093) Radio Frequency Radiation Exposure Assessment: Portable devices No deviation KDB 447498 D04v01 RF Exposure Procedures and Equipment Authorization Policies for Mobile and Portable Devices No deviation Note 1: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 2: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 9 REPORT No.：SZ23080207S01 2. Device Category and RF Exposure Limit Per user manual, based on 47 CFR 2.1093, this device belongs to portable device category with General Population/Uncontrolled exposure. Portable Devices: 47 CFR 2.1093(b) For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. General Population/Uncontrolled Exposure: 47 CFR 2.1093(d) (2) Limits for General Population/Uncontrolled …

Text truncated - open the document above for the full version.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 56 REPORT No.：SZ23080207W01 TEST REPORT APPLICANT : Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. PRODUCT NAME : Crisp wind MODEL NAME : WS-23003, MSM-CT1300M, WS-23003-1, MSM-MS1300M BRAND NAME :N/A FCC ID :UR9WS-23003 STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2023-08-21 TEST DATE :2023-08-21 to 2023-08-25 ISSUE DATE : 2023-09-11 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 56 REPORT No.：SZ23080207W01 DIRECTORY 1. Summary of Test Result ················································································ 4 1.1. Testing Applied Standards ·········································································· 5 1.2. Test Equipment List ··················································································· 6 1.3. Measurement Uncertainty ··········································································· 8 1.4. Testing Laboratory ····················································································· 8 2. General Description ····················································································· 9 2.1. Information of Applicant and Manufacturer ··················································· 9 2.2. Information of EUT ····················································································· 9 2.3. Channel List of EUT ·················································································· 10 2.4. Test Configuration of EUT ·········································································· 11 2.5. Test Conditions ························································································ 11 2.6. Test Setup Layout Diagram ········································································ 11 3. Test Results ······························································································· 14 3.1. Antenna Requirement ··············································································· 14 3.2. Duty Cycle of Test Signal ··········································································· 15 3.3. Maximum Peak Conducted Output Power ···················································· 16 3.4. Maximum Average Conducted Output Power ··············································· 17 3.5. 6 dB Bandwidth ························································································ 18 3.6. Conducted Spurious Emissions and Band Edge ··········································· 19 3.7. Power Spectral Density ············································································· 20 3.8. Conducted Emission ················································································· 21 3.9. Restricted Frequency Bands ······································································ 22 3.10. Radiated Emission ···················································································· 23 Annex A Test Data and Result ·········································································· 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 56 REPORT No.：SZ23080207W01 Change History Version Date Reason for change 1.0 2023-09-11 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 56 REPORT No.：SZ23080207W01 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 N/A Duty Cycle of Test Signal Aug. 22, 2023 Su Xiaoxian PASS No deviation 3 15.247(b) Maximum Peak Conducted Output Power Aug. 22, 2023 Su Xiaoxian PASS No deviation 4 15.247(b) Maximum Average Conducted Output Power Aug. 22, 2023 Su Xiaoxian PASS No deviation 5 15.247(a) Bandwidth Aug. 22, 2023 Su Xiaoxian PASS No deviation 6 15.247(d) Conducted Spurious Emission and Band Edge Aug. 22, 2023 Su Xiaoxian PASS No deviation 7 15.247(e) Power Spectral Density Aug. 22, 2023 Su Xiaoxian PASS No deviation 8 15.207 Conducted Emission Aug. 23, 2023 Wang Deyong PASS No deviation 9 15.247(d) Restricted Frequency Bands Aug. 25, 2023 Yang Llian PASS No deviation 10 15.209, 15.247(d) Radiated Emission Aug. 24, 2023 Li Hanbin PASS No deviation Note 1: The tests were performed according to the method of measurements prescribed in ANSIC63.10-2013 and KDB558074 D01 v05r02. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 3: When the test result …

Text truncated - open the document above for the full version.

广东金密电子有限公司 GuangdongJin mi ElectronicsCo., LTD 东莞市厚街镇厚街科技大道 7 号 16 栋一单元 8 楼 8th floor, Unit 1, Building16, No.7 Hou jie TechnologicalAvenue,Hou jie Town, Dong guan City Summary InvertedF AntennaSpecification ITEMANT SPEC Model Name2.4G ANT Center Frequency HorizontalVertical 2400MHz 2450MHz 2500MHz2400MHz 2450MHz 2500MHz -1.26-0.76-0.58-5.25-2.46-1.86 MAX. Gain-0.58dB PolarizationHorizontaland Vertical AzimuthBeam Pattern Omni-directional Impedance50 Ohm AntennaLength38.20mm AntennaPhoto & Length(mm) 广东金密电子有限公司 GuangdongJinmiElectronicsCo.,LTD 东莞市厚街镇厚街科技大道 7 号 16 栋一单元 8 楼 8thfloor,Unit1,Building16,No.7HoujieTechnologicalAvenue,HoujieTown,DongguanCity Horizontal:2400MHz2450MHz2500MHz Power(dBm) Max:0Min:-40Scale:5/div Frequency (MHz) Gain(dB) MaxMinAvg 2400-1.26174-30.0801-7.18716 2450-0.765802-36.5604-7.48023 2500-0.585582-22.0315-6.59127 广东金密电子有限公司 GuangdongJinmiElectronicsCo.,LTD 东莞市厚街镇厚街科技大道 7 号 16 栋一单元 8 楼 8thfloor,Unit1,Building16,No.7HoujieTechnologicalAvenue,HoujieTown,DongguanCity Vertical:2400MHz2450MHz2500MHz Power(dBm) Max:0Min:-30Scale:5/div Frequency (MHz) Gain(dB) MaxMinAvg 2400-5.2537-22.1424-12.4294 2450-2.4652-24.5837-10.4702 2500-1.86120-29.5214-9.20432 广东金密电子有限公司 GuangdongJinmiElectronicsCo.,LTD 东莞市厚街镇厚街科技大道 7 号 16 栋一单元 8 楼 8thfloor,Unit1,Building16,No.7HoujieTechnologicalAvenue,HoujieTown,DongguanCity 3DRadiationPattern ANTTestLabs：AttestationofGlobalComplianceCo.,Ltd.

FCC ID: UR9WS-23003 Test Setup Photos 1. Conducted emission main’s port front view 2. Conducted emission main’s port side view 3. Radiated emission (9KHz-30MHz) 4. Radiated emission (30MHz-1GHz) 5. Radiated emission (above 1GHz) 6. RF measurement setup (Bluetooth LE)