V4P-MS-358BT3Bluetooth 3.0 mouse

Wireless Optical Mouse With Extended Battery Life Model# BT9750RED/BLK/BLU User Manual PID # 111642/3/4-109289 R e v. 141015 All brand name and trademarks are the property of their respective companies. MacBook, MacBook Air, MacBook Pro, iMac, Mac Mini, Mac Pro, Mac and Mac OS X are registered trademarks of Apple Inc. Windows, Windows XP, Windows Vista, Windows 7 and Windows 8 are registered trademarks of Microsoft Corporation in the United States and /or other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gear Head is under license. USER RECORD To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user manual. Date of Purchase: ________________________________ Model Number: ________________________________ Product Rev Number (located below the UPC on the package): ____________________ FCC RADIAT ION NORM FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential i nstallation. This equipment generates, uses, and can radiate radio frequency energy, and if not i nstalled or used i n accorda nce wi t h t he i nstr ucti ons, ma y cause harm f ul i nte rfere nce t o radio communication. However, there is no guarantee that interference will not occur i n television reception, which can be determi ned by turni ng the equipment off and on. The user is encouraged to try and correct the i nterference by one or more of the following measures:  Reorient or relocate the receivi ng antenna.  Increase the separation between the equipment and the receiver.  Connect the equipment into an outlet on a circuit different from that to whic h t he recei ve r is connected.  Consult the dealer or an experienced radio/TV technician for help. CAUTION! The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. PACKAGE CONTENT S 2 Your new mo use will s hip with the fo llo wing ite ms: - Wireless Op tical Mo use with Extended battery life - 1 AA Battery - User Manual - Warranty Information SYSTEM REQUIREMENTS Please be sure that all of the system requirements below are met to avoid difficulties during installation: Compatible with：PCs, Mac ® computers, and C hromebook™ notebook computers Works with： - Windows ® XP, Windows ® Vista , Wi ndows ® 7 a nd Windows ® 8 Operating Syste ms - Mac OS X ® 10.3 a nd Abo ve - Bluetooth ® Wireless Technology Enable Devices Installing Battery To properly i nsta ll batte ry i nto your mouse, please follow the instructions below: 1. Remove the battery compartment cover from your mouse. 2. Ins tall o ne AA battery into the battery compartment following the orientation guide i n the battery bay. 3 3. Replace the battery compartment cover back onto your mouse until it locks securely. Establishing a Connection For Windows ® Operating Systems Users Before connecting your mouse, please make sure you have properly set up and enabled the Bluetooth ® wireless technology enabled radio (e.g. a Bluetooth ® wireless technology enabled dongle) onto your computer. To pair your mouse with your computer, follow the instr uc ti ons belo w: 1. Turn on your computer and enable the Bluetooth ® wireless technology enabled radio function on your computer if you have not yet done so. 2. Open the Bluetooth ® se tti ngs on your computer and set it to search for Bluetooth ® wire less technology enabled de vi ces. 3. Turn on your mouse b y s wi tc hi ng t he Power Switch on the bottom to t he ON position. 4. Press the Connect Button on the bottom of your mouse to make your mouse searchable, then place your mo use within 30 feet of the device that you are usi ng to pair with your mouse. 5. Search for your mouse on your computer usi ng the Bluetooth ® software. Follow the on- screen i nstructions to comple te the pairing process (NOTE: For more information, please refer to your Bluetooth ® wireless technology enabled radio user ma nual fo r mo re i nstr uc ti ons on how to pair) . Yo ur mouse is now ready to be used. Power Switc h C onnec t B ut ton 4 For Mac OS X ® 10.3 and Above Users Your operating system natively supports devices with pairing with Bluetooth ® wireless technology. This section demonstrates one of the easiest ways to connect your mo use to your computer. NOTE: The procedures listed below are for demonstration only and are based on Mac OS X ® 10.4.8 with default setti ngs. The procedures and screenshots may look slightly different than yours but with similar options. If you need further help to set up a device with Bluetooth ® wireless technology, please refer to yo ur computer user ma nua l for more i nfo rmatio n. 1. Turn on your computer and make sure your have properly installed your Bluetooth ® wireless technology enabled dongle (if applicable). 2. At your desktop, click the Bluetooth ® i co n o n t he top-right corner of your screen, then select “Turn Bluetooth On” to enable the Bluetooth ® feature. Click the Bluetooth ® icon on the top- right corner of your screen again, and then select “Setup Bluetooth Device...” to open the Bluetooth Setup Assistant dialog box. At the welcome screen, click the “Continue” button to proceed. 3. At the welcome screen, click the “Continue” button to proceed. 4. Turn on your mouse b y s witc hi ng t he Power Switch on the bottom of your mouse to t he ON position the n press the Connect Button on the bottom of your mouse to make your mouse searchable and place your mo use with in 30 fee t from …

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details Test model No.: BT9750RED

1 Photographs - EUT Constructional Details Test model No.: BT9750RED

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140900531802 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1409005318RF Applicant: Dongguan Newmen Electronics Technology Co., LTD Manufacturer: Dongguan Newmen Electronics Technology Co., LTD Factory: Dongguan Newmen Electronics Technology Co., LTD Product Name: Bluetooth 3.0 mouse Model No.(EUT): BT9750RED Add Model No.: BT9750XXX (X=A-Z, XXX represents the color) Trade Mark: FCC ID: V4P-MS-358BT3 Standards: 47 CFR Part 1.1307(2013) 47 CFR Part 2.1093 (2013) KDB447498D01 General RF Exposure Guidance v05 Date of Receipt: 2014-09-26 Date of Test: 2014-10-14 to 2014-10-17 Date of Issue: 2014-10-20 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140900531802 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-10-20 Original Authorized for issue by: Tested By 2014-10-17 (Apple Sun) /Project Engineer Date Prepared By 2014-10-20 (Hedy Wen) /Clerk Date Checked By 2014-10-23 (Owen Zhou) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140900531802 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140900531801 Page: 1 of 52 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1409005318RF Applicant: Dongguan Newmen Electronics Technology Co., LTD Manufacturer: Dongguan Newmen Electronics Technology Co., LTD Factory: Dongguan Newmen Electronics Technology Co., LTD Product Name: Bluetooth 3.0 mouse Model No.(EUT): BT9750RED Add Model No.: BT9750XXX (X=A-Z, XXX represents the color) Trade Mark: FCC ID: V4P-MS-358BT3 Standards: 47 CFR Part 15, Subpart C (2013) Date of Receipt: 2014-09-26 Date of Test: 2014-10-14 to 2014-10-17 Date of Issue: 2014-10-20 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140900531801 Page: 2 of 52 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-10-20 Original Authorized for issue by: Tested By 2014-10-17 (Apple Sun) /Project Engineer Date Prepared By 2014-10-20 (Hedy Wen) /Clerk Date Checked By 2014-10-23 (Owen Zhou) /Reviewer Date SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140900531801 Page: 3 of 52 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Resul…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: BT9750RED 1.1 Radiated Emission 1.2 Radiated Spurious Emission