V4P-MX168CDongle

Neutron Engineering Inc. Project No.: 1012C267 Page 2 of 5 1012C267 1012C267 Neutron Engineering Inc. Project No.: 1012C267 Page 2 of 5 1012C267 1012C267

Neutron Engineering Inc. Project No.: 1012C267 Page 3 of 5 1012C267 Neutron Engineering Inc. Project No.: 1012C267 Page 4 of 5 1012C267 1012C267 Neutron Engineering Inc. Project No.: 1012C267 Page 4 of 5 1012C267 1012C267 Neutron Engineering Inc. Project No.: 1012C267 Page 5 of 5 1012C267 1012C267 Neutron Engineering Inc. Project No.: 1012C267 Page 5 of 5 1012C267 1012C267

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 2 of 61 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 3 of 61 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 12 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 14 4 . EMC EMISSION TEST 15 4.1 CONDUCTED EMISSION MEASUREMENT 15 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 15 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 15 4.1.3 TEST PROCEDURE 16 4.1.4 DEVIATION FROM TEST STANDARD 16 4.1.5 TEST SETUP 16 4.1.6 EUT OPERATING CONDITIONS 16 4.1.7 TEST RESULTS 17 4.2 RADIATED EMISSION MEASUREMENT 19 4.2.1 RADIATED EMISSION LIMITS 19 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 20 4.2.3 TEST PROCEDURE 23 4.2.4 DEVIATION FROM TEST STANDARD 23 4.2.5 TEST SETUP 24 4.2.6 EUT OPERATING CONDITIONS 24 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 25 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 27 5 . NUMBER OF HOPPING CHANNEL 39 5.1 APPLIED PROCEDURES / LIMIT 39 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 39 5.1.2 TEST PROCEDURE 39 5.1.3 DEVIATION FROM STANDARD 39 5.1.4 TEST SETUP 39 5.1.5 EUT OPERATION CONDITIONS 39 5.1.6 TEST RESULTS 40 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 4 of 61 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 41 6.1 APPLIED PROCEDURES / LIMIT 41 6.1.1 MEASUREMENT INSTRUMENTS LIST 41 6.1.2. TEST PROCEDURES 41 6.1.3. TEST SETUP LAYOUT 41 6.1.4. TEST DEVIATION 41 6.1.5. EUT OPERATION DURING TEST 41 6.1.6. TEST RESULTS 42 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 44 7.1 APPLIED PROCEDURES / LIMIT 44 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 44 7.1.2 TEST PROCEDURE 44 7.1.3 DEVIATION FROM STANDARD 44 7.1.4 TEST SETUP 44 7.1.5 EUT OPERATION CONDITIONS 44 7.1.6 TEST RESULTS 45 8 . BANDWIDTH TEST 47 8.1 APPLIED PROCEDURES / LIMIT 47 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 47 8.1.2 TEST PROCEDURE 47 8.1.3 DEVIATION FROM STANDARD 47 8.1.4 TEST SETUP 47 8.1.5 EUT OPERATION CONDITIONS 47 8.1.6 TEST RESULTS 48 9 . PEAK OUTPUT POWER TEST 50 9.1 APPLIED PROCEDURES / LIMIT 50 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 50 9.1.2 TEST PROCEDURE 50 9.1.3 DEVIATION FROM STANDARD 50 9.1.4 TEST SETUP 50 9.1.5 EUT OPERATION CONDITIONS 50 9.1.6 TEST RESULTS 51 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 53 10.1 APPLIED PROCEDURES / LIMIT 53 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 53 10.1.2 TEST PROCEDURE 53 10.1.3 DEVIATION FROM STANDARD 53 10.1.4 TEST SETUP 53 10.1.5 EUT OPERATION CONDITIONS 53 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 5 of 61 Table of Contents Page 10.1.6 TEST RESULTS 54 11 . EUT TEST PHOTO 60 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 6 of 61 1. CERTIFICATION E q u i p m e n t : Dongle Brand Name : NEWMEN Model Name : MX-168C A p p l i c a n t : Shenzhen Fuyeda Industry Development Corp.,Ltd. Date of Test : Nov. 26, 2010 ~ Jan. 12, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1012C267) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 7 of 61 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(d) Antenna conducted Spurious EmissionPASS 15.247 (a)(1) Hopping Channel Separation PASS 15.247 (b)(1) Peak Output Power PASS 15.247(d) 15.209 Radiated Spurious Emission PASS 15.247 (a)(1)(iii) Number of Hopping Frequency PASS 15.247 (a)(1)(iii) Dwell Time PASS 15.205 Restricted Bands PASS 15.203 Antenna Requirement PASS 1.1307 1.1310 2.1091 2.1093 RF Exposure Compliance PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 8 of 61 2.1 TEST FACILITY The test facili…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 60 of 61 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 60 of 61 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 61 of 61 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1012C267 Page 61 of 61 Radiated Measurement Photos