V5PIM304GBWLCUNATTENDED PAYMENT TERMINAL

PAX Technology Limited Confirmation Letter WE, PAX Technology Limited The product: UNATTENDED PAYMENT TERMINAL And model No.: IM30 FCC ID: V5PIM304GBWLC We declare that the software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restrictions on transmissions for beacons and support for ad-hoc peer-to-peer modes. Best Regards Company Name: PAX Technology Limited Contact Name: Aileen Liu Title of Person: Manager Address: FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China Date: 6/5/2026

PAX Technology Limited Date: 8/5/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: V5PIM304GBWLC Grantee’s FRN: 0017536285 1.PAX Technology Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.PAX Technology Limited (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3.PAX Technology Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. 4.PAX Technology Limited (“the applicant”) certifies that the RF device is not a router “produced in a foreign country”. Sincerely yours, Company Name: PAX Technology Limited Contact Name: Aileen Liu Title of Person: Manager Address: FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China

PAX Technology Limited Date: 6/5/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: V5PIM304GBWLC Grantee’s FRN: 0017536285 PAX Technology Limited (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: FRN: 0033507476 Contact Person: John Hallisey Company Name: Pax Technology,Inc. Company Address: 8800 Baymeadows Way W.Jacksonville,FL 32256 Email: [email protected] Sincerely yours, Company Name: PAX Technology Limited Contact Name: Aileen Liu Title of Person: Manager Address: FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China

PAX Technology Limited Date: 09/25/2025 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as act s of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k)document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: PAX Technology Limited Contact Name: Aileen Liu Title of Person: Manager Address: FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China

PAX Technology Limited DATE : 06/05/2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Request for Short-Term Confidentiality Company name: PAX Technology Limited FCC ID: V5PIM304GBWLC FCC Part 15 Certification Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: (1)Test Setup Photos (2)External Photos (3)Internal Photos (4)User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Company Name: PAX Technology Limited Contact Name: Aileen Liu Title of Person: Manager Address: FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China Date: 6/5/2026

PAX Technology Limited Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: V5PIM304GBWLC To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Tune up exhibition Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: PAX Technology Limited Contact Name: Aileen Liu Title of Person: Manager Address: FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China Date: 6/5/2026

Label： Label location：

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR § 1.1307 FCC 47 CFR § 1.1310 FCC 47 CFR § 2.1091 RF EXPOSURE EVALUATION REPORT For UNATTENDED PAYMENT TERMINAL MODEL NUMBER: IM30 REPORT NUMBER: 4792254277-1-RF-8 FCC ID: V5PIM304GBWLC ISSUE DATE: Jun. 15, 2026 Prepared for PAX Technology Limited FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China Prepared by UL Verification Services (Guangzhou) Co., Ltd., Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792254277-1-RF-8 Page 2 of 9 Page 2 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 Jun. 15, 2026 Initial Issue \ REPORT NO.: 4792254277-1-RF-8 Page 3 of 9 Page 3 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION .................................................................................... 5 4. EQUIPMENT UNDER TEST ................................................................................................. 6 4.1. DESCRIPTION OF EUT ................................................................................................. 6 5. REQUIREMENT .................................................................................................................... 7 REPORT NO.: 4792254277-1-RF-8 Page 4 of 9 Page 4 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: PAX Technology Limited Address: FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China Manufacturer Information Company Name: PAX Computer Technology (Shenzhen) Co., Ltd. Address: Room 701, PAX Technology Building, Shanxia Community, Pinghu Sub-district, Longgang District, Shenzhen, China EUT Information EUT Name: UNATTENDED PAYMENT TERMINAL Model: Brand: IM30 Pax Sample Received Date: May 19, 2026 Sample Status: Normal Sample ID: 9755003 Date of Tested: May 21, 2026 to June 14, 2026 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR § 1.1307 FCC 47 CFR § 1.1310 FCC 47 CFR § 2.1091 PASS Prepared By: Checked By: James Qin Kebo Zhang Project Engineer Operations Leader Approved By: Stephen Guo Operations Manager REPORT NO.: 4792254277-1-RF-8 Page 5 of 9 Page 5 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with FCC 47 CFR §2.1091 and KDB 447498 D04 v01. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch has been recognized to perform compliance testing on equipment subject to the Commission's Delcaration of Conformity (DoC) and Certification rules ISED (Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch has been registered and fully described in a report filed with ISED. The Company Number is 21320 and the test lab Conformity Assessment Body Identifier (CABID) is CN0046. VCCI (Registration No.: C-20202, G-20240, R-20248 and T-20202) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch has been assessed and proved to be in compliance with VCCI, the membership No. is 3793. Facility Name: Chamber E, the VCCI registration No. is G-20240 and R-20248 Shielding Room F, the VCCI registration No. is C-20202 and T-20202 REPORT NO.: 4792254277-1-RF-8 Page 6 of 9 Page 6 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 4. EQUIPMENT UNDER TEST 4.1. DESCRIPTION OF EUT EUT Name UNATTENDED PAYMENT TERMINAL Model IM30 Normal Test Voltage: AC 120V 60Hz REPORT NO.: 4792254277-1-RF-8 Page 7 of 9 Page 7 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 5. REQUIREMENT LIMIT AND CALCULATION METHOD Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the …

Text truncated - open the document above for the full version.

Dongguan YiJia Electronics Communication Technology Co.,Ltd. Tester : Liu tao Approval : Yin tao Date : 2026 /01/ 29 Antenna Test Report Contents: 1.Antenna Passive Test 2. Device Profile 3. WIFI Antenna Test Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan,Guangdong Guangdong Project name IM3 0-V3-WIF I Name of antenna FPC Antenna form P IFA Radiate Omni-direct iona l Polarization Line polarization Device calibration date 5071C 2025/06/15~2026/06/15 General Test 2025/08/20~2026/08/20 1.Antenna Passive Test Device 2. Device Profile Please refer to the external photos. WIFI Antenna 3. WIFI Antenna Test Agilent E5071C S11 Parameter Test // WIFI Antenna Passive Test For WiFi Antenna(2.4G) Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 2400 25.68 -5.9-1.8 2410 25.8 -5.88-1.98 2420 26.37 -5.79-2.06 2430 26.97 -5.69-2.04 2440 27.44 -5.62-1.79 2450 27.7 -5.57-1.63 2460 27.8 -5.56-1.37 2470 28.23 -5.49-1.1 2480 28.12 -5.51-0.88 2490 27.49 -5.61-0.76 2500 27.09 -5.67-0.62 Radiation Pattern For WIFI Antenna （ 2400MHz ） Radiation Pattern For WIFI Antenna （ 2450MHz ） Radiation Pattern For WIFI Antenna （ 2500MHz ） Passive Test For WiFi Antenna(5.8G) Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 5150 30.86 -5.110.05 5200 32.88 -4.830.31 5250 32.52 -4.880.62 5300 31.07 -5.081.1 5350 33.65 -4.731.56 5400 35.15 -4.541.44 5450 36.81 -4.341.65 5500 32.77 -4.851.43 5550 33.5 -4.751.11 5600 35.39 -4.510.99 5650 34.87 -4.581.36 5700 32.32 -4.91.45 5750 29.42 -5.311.2 5800 31.4 -5.031.83 5850 30.22 -5.22.13 Radiation Pattern For WIFI Antenna （ 5150MHz ） Radiation Pattern For WIFI Antenna （ 5500MHz ） Radiation Pattern For WIFI Antenna （ 5750MHz ） Radiation Pattern For WIFI Antenna （ 5850MHz ）

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 4 TEST REPORT For UNATTENDED PAYMENT TERMINAL MODEL NUMBER: IM30 REPORT NUMBER: 4792254277-1-RF-2 ISSUE DATE: June 15, 2026 FCC ID: V5PIM304GBWLC IC: 11689A-IM304GBWLC HVIN: IM30 4GBWLC Prepared for PAX Technology Limited FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792254277-1-RF-2 Page 2 of 74 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 June 15, 2026 Initial Issue REPORT NO.: 4792254277-1-RF-2 Page 3 of 74 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass (NOTE 1) AC Power Line Conducted Emission ANSI C63.10-2020, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 Pass Conducted Output Power ANSI C63.10-2020, Clause 11.9.1.2 FCC Part 15.247 (b)(3) RSS-247 Clause 6.3.2 Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020, Clause 11.8.1 FCC Part 15.247 (a)(2) RSS-247 Clause 6.3.1 (a) RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2020, Clause 11.10.2 FCC Part 15.247 (e) RSS-247 Clause 6.3.1 (b) Pass Conducted Band edge and spurious emission ANSI C63.10-2020, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020, Clause 11.12 FCC Part 15.247 (d) FCC Part 15.205/15.209 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: 1. For ISED, this report is also performed according to ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 standards. 2. For FCC, this report is also performed according to ANSI C63.10-2020 + Cor.1-2023. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 4> when <Simple Acceptance> decision rule is applied. Decision rule for statement of conformity: The measurement uncertainty is not taken into account for statement of conformity. REPORT NO.: 4792254277-1-RF-2 Page 4 of 74 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. CONTENTS 1. ATTESTATION OF TEST RESULTS ...................................................................................... 6 2. TEST METHODOLOGY .......................................................................................................... 7 3. FACILITIES AND ACCREDITATION ...................................................................................... 7 4. CALIBRATION AND UNCERTAINTY ..................................................................................... 8 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................ 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................. 8 5. EQUIPMENT UNDER TEST .................................................................................................... 9 5.1. DESCRIPTION OF EUT ............................................................................................. 9 5.2. CHANNEL LIST ........................................................................................................ 10 5.3. MAXIMUM POWER .................................................................................................. 10 5.4. TEST CHANNEL CONFIGURATION ....................................................................... 10 5.5. THE WORSE CASE POWER SETTING PARAMETER .......................................... 11 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .......................................................... 11 5.7. SUPPORT UNITS FOR SYSTEM TEST .................................................................. 12 6. MEASURING EQUIPMENT AND SOFTWARE USED ......................................................... 13 7. ANTENNA PORT TEST RESULTS ...................................................................................... 16 7.1. CONDUCTED OUTPUT POWER ............................................................................ 16 7.2. 6DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ........................................ 17 7.3. POWER SPECTRAL DENSITY ............................................................................... 19 7.4. CONDUCTED BAND EDGE AND SPURIOUS EMISSION...................................... 21 7.5. DUTY CYCLE ........................................................................................................... 23 8. RADIATED TEST RESULTS ................................................................................................ 24 8.…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 4 TEST REPORT For UNATTENDED PAYMENT TERMINAL MODEL NUMBER: IM30 REPORT NUMBER: 4792254277-1-RF-3 ISSUE DATE: August 10, 2026 FCC ID: V5PIM304GBWLC IC: 11689A-IM304GBWLC HVIN: IM30 4GBWLC Prepared for PAX Technology Limited FLAT/RM 2504, 25/F, SUN HUNG KAI CENTRE, 30 HARBOUR ROAD, WANCHAI, HK, China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792254277-1-RF-3 Page 2 of 131 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 August 10, 2026 Initial Issue REPORT NO.: 4792254277-1-RF-3 Page 3 of 131 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass (NOTE 1) AC Power Line Conducted Emission ANSI C63.10-2020, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 Pass Conducted Output Power ANSI C63.10-2020, Clause 11.9.1.2 FCC Part 15.247 (b)(3) RSS-247 Clause 6.3.2 Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020, Clause 11.8.1 FCC Part 15.247 (a)(2) RSS-247 Clause 6.3.1 (a) RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2020, Clause 11.10.2 FCC Part 15.247 (e) RSS-247 Clause 6.3.1 (b) Pass Conducted Band edge and spurious emission ANSI C63.10-2020, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020, Clause 11.12 FCC Part 15.247 (d) FCC Part 15.205/15.209 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: 1. For ISED, this report is also performed according to ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 standards. 2. For FCC, this report is also performed according to ANSI C63.10-2020 + Cor.1-2023. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 4> when <Simple Acceptance> decision rule is applied. Decision rule for statement of conformity: The measurement uncertainty is not taken into account for statement of conformity. REPORT NO.: 4792254277-1-RF-3 Page 4 of 131 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. CONTENTS 1. ATTESTATION OF TEST RESULTS ...................................................................................... 6 2. TEST METHODOLOGY .......................................................................................................... 7 3. FACILITIES AND ACCREDITATION ...................................................................................... 7 4. CALIBRATION AND UNCERTAINTY ..................................................................................... 8 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................ 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................. 8 5. EQUIPMENT UNDER TEST .................................................................................................... 9 5.1. DESCRIPTION OF EUT ............................................................................................. 9 5.2. CHANNEL LIST ........................................................................................................ 10 5.3. MAXIMUM POWER .................................................................................................. 10 5.4. TEST CHANNEL CONFIGURATION ....................................................................... 10 5.5. THE WORSE CASE POWER SETTING PARAMETER .......................................... 11 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .......................................................... 12 5.7. SUPPORT UNITS FOR SYSTEM TEST .................................................................. 13 6. MEASURING EQUIPMENT AND SOFTWARE USED ......................................................... 14 7. ANTENNA PORT TEST RESULTS ...................................................................................... 17 7.1. CONDUCTED OUTPUT POWER ............................................................................ 17 7.2. 6DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ........................................ 18 7.3. POWER SPECTRAL DENSITY ............................................................................... 20 7.4. CONDUCTED BAND EDGE AND SPURIOUS EMISSION...................................... 22 7.5. DUTY CYCLE ........................................................................................................... 24 8. RADIATED TEST RESULTS ...............................................................................................…

Text truncated - open the document above for the full version.