V7R-TINAVAP2Navigator Access Point

Setting Up the TI-Nspire™ Navigator™ Teacher Software1 Setting Up the TI-Nspire™ Navigator™ Teacher Software The TI-Nspire™ Navigator™ classroom learning system provides the hardware and software tools you need to set up a wireless classroom network. The hardware creates a wireless communications network so that your computer can communicate with student handhelds. The hardware includes TI-Nspire™ CX Wireless Network Adapters, TI-Nspire™ Navigator™ Cradles, and the TI-Nspire™ Navigator™ Access Point. The wireless adapters are used with the TI-Nspire™ CX and TI-Nspire™ CX CAS handhelds. The cradles are used with the TI-Nspire™ CX, TI-Nspire™ CX CAS, TI-Nspire™, or TI-Nspire™ CAS handhelds. The TI-Nspire™ Navigator™ Access Point is the communication link used in all wireless classroom setups. The TINAVAP2 access point supports the following wireless clients: • TI-Nspire™ CX Wireless Network Adapters • TI-Nspire™ Navigator™ Cradles with FCC or IC numbers ending in TINAVWC2 The software contains a number of tools to enhance your classroom, including: •Quick Poll. Lets you send polls to students, receive student responses to the polls, and review the poll results with your students. •Screen Capture. Lets you capture screens from the students’ handhelds or computers automatically or at specific time intervals. You can collect a stack, or history, or screens. •Live Presenter. Lets you display work as it is being performed on your handheld screen or on student handheld screens. •Review. Lets you collect and review student assignments, watch results in real time as students answer questions, and analyze data for the entire class or for individual students. You can obtain educational content on the Web at TI’s Activities Exchange: education.ti.com/activities. The setup process involves these steps: • Unpacking the boxes • Charging the TI-Nspire™ Navigator™ Cradles • Installing the handheld software 2Setting Up the TI-Nspire™ Navigator™ Teacher Software • Connecting the access point to the computer • Starting the Network Manager wizard • Setting up a network • Adding the wireless clients to the network Unpacking the Boxes The TI-Nspire™ Navigator™ System product consists of TI-Nspire™ Navigator™ Teacher Software, an access point, and either 15 or 30 cradles or wireless adapters, depending on your specific order. If necessary, you can purchase additional kits to accommodate as many as 60 students. Identify each item, and check the items against the following lists to make sure your order is complete. Each TI-Nspire™ Navigator™ System comes with the following items. • One TI-Nspire™ Navigator™ Access Point • One 60 inch USB computer cable • One DVD containing TI-Nspire™ Navigator™ Teacher Software •The Getting Started with the TI-Nspire™ Navigator™ Teacher Software guide One access point One USB cable One DVD Getting Started guide Setting Up the TI-Nspire™ Navigator™ Teacher Software3 If you purchased the TI-Nspire™ Navigator™ System for use with the TI-Nspire™ CX, TI-Nspire™ CX CAS, TI-Nspire™, or TI-Nspire™ CAS handhelds, contents include the following items: • TI-Nspire™ Navigator™ Cradles • AC9940 power adapter (includes power supply and power cord) • TI-Nspire™ Navigator™ Cradle Charging Bay If you purchased the TI-Nspire™ CX Navigator™ System for use with the TI-Nspire™ CX or TI-Nspire™ CX CAS handhelds exclusively, contents include the following items. Quantities will vary, depending on the system you purchased. • TI-Nspire™ CX Wireless Network Adapters • TI-Nspire™ CX Wireless Network Adapter storage cases Charging the Cradles The TI-Nspire™ Navigator™ Cradles contain rechargable batteries. You must charge the batteries overnight before using them in class. When the cradles are fully charged, they will function all day under continuous use. You should recharge them each night. Cradle charging bay Cradles AC9940 power adapter (for the charging bay) Wireless network adapter Storage case for the TI-Nspire™ CX Wireless Network Adapters 4Setting Up the TI-Nspire™ Navigator™ Teacher Software The TI-Nspire™ Navigator™ Cradle Charging Bay can hold from one to five cradles. After you place the cradles in the charging bay, they are charged simultaneously until all are fully charged. If the batteries are fully discharged, it may take up to 12 hours to fully charge the batteries. Note: You cannot damage the batteries by leaving them in the charging bay beyond the time needed to fully charge them. Also, it is not necessary to fully discharge the batteries before recharging them. Make sure you have enough (3-4) power outlets for the equipment you received. If necessary, obtain a power strip so that you have plenty of grounded outlets. 1. Insert the small end of the AC9940 power adapter cord into the charging bay’s power jack. 2. Plug the other end of the adapter into a power outlet. 3. Insert each TI-Nspire™ Navigator™ Cradle into the TI-Nspire™ Navigator™ Cradle Charging Bay. Make sure the LED is amber. Note: You can charge a single wireless cradle using an AC9926 adapter (sold separately). Checking the LEDs Two LEDs (small lights) at the top of each TI-Nspire™ Navigator™ wireless cradle blink or change colors to indicate various operations or status. The LED indicates network activity. The LED indicates battery- charging status. LEDs Setting Up the TI-Nspire™ Navigator™ Teacher Software5 When the cradles are still in the TI-Nspire™ Navigator™ Cradle Charging Bay: • A solid amber LED means the wireless cradle is currently recharging. • A solid red LED means the wireless cradle does not have good contact with the charging bay. Reposition the cradle so it has good contact and the LED turns amber. • A solid green LED means the wireless cradle is fully charged. Installing the Handheld Software Before you use the TI-Nspire™ Navigator™ Teacher Software with handhelds, make sure you have the latest operating system installed on all of the handhelds for the software to work properly. You can use the TI-Nspire™ Na…

Text truncated - open the document above for the full version.

FCC ID.: V7R-TINAVAP2 Page 1 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112001 Figure 1 General Appearance (Front View) Figure 2 General Appearance (Back View) FCC ID.: V7R-TINAVAP2 Page 2 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112001 Figure 3 General Appearance (Mini USB Port) Figure 4 60”USB Cable FCC ID.: V7R-TINAVAP2 Page 3 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112001 Figure 5 12”USB Cable

KAPNG Regulatory Artwork KAPNGR Roberts 1 of 1 10.03.20111:1 DOCUMENT: PROJECT:DESIGNER:REV: PAGE: DATE:SCALE: wireless access point Overlay substrait or background printColor reference Overlay Print 1 1

FCC ID.: V7R-TINAVAP2 Page 1 of 2 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112001 Figure 1 General Appearance (Cover Remove) Figure 2 Wireless Module (Removed) FCC ID.: V7R-TINAVAP2 Page 2 of 2 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112001 Figure 3 Wireless Module (Component Side) Figure 4 Wireless Module (Solder Side)

Page 1 of 27 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: F1112003 TEST REPORT FOR FCC PART 15 B For Texas Instruments Incorporated TI-Nspire Navigator Access Point Model No.: TINAVAP2 Brand: TEXAS INSTRUMENTS Prepared for Texas Instruments Incorporated 12500 TI Boulevard Dallas, TX 75243-4136 USA Prepared by Audix Technology (Wujiang) Co., Ltd. EMC Dept. No. 1289 Jiangxing East Road, the Eastern Part of Wujiang Economic Development Zone Jiangsu China 215200 Tel.: +86-512-63403993 Fax: +86-512-63403339 Report Number ： ACWE-F1112003 Date of Test ： Dec.07 ~08, 2011 Date of Report ： Dec.20, 2011 Page 2 of 27 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: F1112003 TABLE OF CONTENTS Description Page Test Report Verification ..................................................................................................................3 1 SUMMARY OF STANDARDS AND RESULTS .........................................................................4 2 GENERAL INFORMATION .........................................................................................................5 2.1 Description of Device (EUT) ................................................................................................................... 5 2.2 UUT’s Configuration ............................................................................................................................... 5 2.3 Operating Condition of EUT.................................................................................................................... 6 2.4 Tested Supporting System Details ........................................................................................................... 6 2.5 Description of Test Facility...................................................................................................................... 7 2.6 Measurement Uncertainty ........................................................................................................................ 7 3 POWERLINE CONDUCTED EMISSION MEASUREMENT ..................................................8 3.1 Test Equipment ........................................................................................................................................ 8 3.2 Block Diagram of Test Setup................................................................................................................... 8 3.3 Power line Conducted Emission Limit .................................................................................................... 8 (§15.107(a), Class B) ....................................................................................................................................... 8 3.4 Test Procedure ......................................................................................................................................... 9 3.5 Power line Conducted Emission Measurement Results........................................................................... 9 4 RADIATED DISTURBANCE MEASUREMENT .....................................................................14 4.1 Test Equipment ...................................................................................................................................... 14 4.2 Block Diagram of Test Setup................................................................................................................. 15 4.3 Radiation Emission Limit ...................................................................................................................... 16 4.4 Test Procedure ....................................................................................................................................... 16 4.5 Radiated Emission Measurement Results .............................................................................................. 17 5 DEVIATION TO TEST SPECIFICATIONS .............................................................................27 APPENDIX (Photos of EUT) Page 4 of 27 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: F1112003 1 SUMMARY OF STANDARDS AND RESULTS The EUT have been tested according to the applicable standards as referenced below. EMISSION Description of Test Item Standard Limits Results Conducted Emission FCC 47 CFR Part 15 Subpart B/ Oct. 2010 §15.107 (a) Class B PASS Radiated Emission FCC 47 CFR Part 15 Subpart B/ Oct. 2010 §15.109 (a) (g) Class B PASS Page 5 of 27 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: F1112003 2 GENERAL INFORMATION 2.1 Description of Device (EUT) Product ： TI-Nspire Navigator Access Point Model Number ： TINAVAP2 Brand ： TEXAS INSTRUMENTS Applicant ： Texas Instruments Incorporated 12500 TI Boulevard Dallas, TX 75243-4136 USA Manufacturer ： Inventec Appliances(Pudong) Corporation No. 789 Pu Xing Road, Shanghai, PRC Date of Receipt of Sample ： Dec.05, 2011 Date of Test ： Dec.07 ~08, 2011 2.2 UUT’s Configuration Test UUT : UUT×1 I/O Ports : USB port×1 Page 6 of 27 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: F1112003 2.3 Operating Condition of EUT 2.3.1 Set up the EUT as showed in respective block diagram of test setup. 2.3.2 Turn on the power of all equipment. 2.3.3 Driving software “TI-Nspire TM CAS Navigator TM Teacher Software” to make the EUT operating normally. 2.4 Tested Supporting System Details 2.4.1 TI-nspire CX CAS (NSC) Manufacturer ： TI Brand ： TEXAS INSTRUMENTS 2.4.2 TI-Navigator Cradle Manufacturer ： TI Brand ： TEXAS INSTRUMENTS Model No. ： TINAVWC2 2.4.3 Laptop Computer Manufacturer ： DELL Model Number ： PP26L Serial Number ： JX193A01 FCC ID ： FCC By DoC Power Cord ： Unshielded, Detachable, 1.5 m AC Adapter ： M/N: LA65NS1-00 Brand: DELL Input: AC 100-240V, 50-60Hz, 1.5A Output: DC 19.5V,3.34A DC Cord: Unshielded, Undetachable, 2.0m, 1 ferrite core. Page 7 of 27 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: F1112003 2.5 Description of Test Facility Name of Firm ： Audix Technology (Wujiang) Co., Ltd EMC Dept.…

Text truncated - open the document above for the full version.

Page 1 of 4 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112003 1. PHOTOGRAPHS 1.1. Conducted Emission Measurement Front View of conducted emission measurement Side View of conducted emission measurement Page 2 of 4 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112003 1.2. Radiated Emission measurement 1.2.1. Frequency Range 30MHz~1GHz at Semi-Anechoic Chamber Front View of Radiated Measurement Back View of Radiated Measurement Page 3 of 4 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1112003 1.2.2. Frequency Range Above 1GHz at Semi-Anechoic Chamber Front View Back View